Google Git
Sign in
fuchsia / fuchsia / refs/heads/main / . / src / graphics / display / drivers / intel-i915 / dp-display.cc
blob: 5ac8f8bf8729c95eaa743cf7720fb57900fc288f [file] [log] [blame]
// Copyright 2022 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "src/graphics/display/drivers/intel-i915/dp-display.h"
#include <endian.h>
#include <lib/ddk/debug.h>
#include <lib/ddk/driver.h>
#include <lib/fit/defer.h>
#include <lib/mmio/mmio.h>
#include <lib/stdcompat/span.h>
#include <lib/zx/result.h>
#include <lib/zx/time.h>
#include <zircon/assert.h>
#include <zircon/errors.h>
#include <algorithm>
#include <cmath>
#include <cstdint>
#include <cstring>
#include <iterator>
#include <limits>
#include <optional>
#include <variant>
#include <fbl/string_printf.h>
#include "src/graphics/display/drivers/intel-i915/ddi-aux-channel.h"
#include "src/graphics/display/drivers/intel-i915/ddi-physical-layer-manager.h"
#include "src/graphics/display/drivers/intel-i915/dpll.h"
#include "src/graphics/display/drivers/intel-i915/hardware-common.h"
#include "src/graphics/display/drivers/intel-i915/intel-i915.h"
#include "src/graphics/display/drivers/intel-i915/pch-engine.h"
#include "src/graphics/display/drivers/intel-i915/pci-ids.h"
#include "src/graphics/display/drivers/intel-i915/pipe.h"
#include "src/graphics/display/drivers/intel-i915/poll-until.h"
#include "src/graphics/display/drivers/intel-i915/power-controller.h"
#include "src/graphics/display/drivers/intel-i915/registers-ddi-phy-tiger-lake.h"
#include "src/graphics/display/drivers/intel-i915/registers-ddi.h"
#include "src/graphics/display/drivers/intel-i915/registers-dpll.h"
#include "src/graphics/display/drivers/intel-i915/registers-pipe.h"
#include "src/graphics/display/drivers/intel-i915/registers-transcoder.h"
#include "src/graphics/display/drivers/intel-i915/registers-typec.h"
#include "src/graphics/display/drivers/intel-i915/registers.h"
#include "src/graphics/display/lib/api-types-cpp/display-timing.h"
namespace i915 {
namespace {
constexpr uint32_t kBitsPerPixel = 24; // kPixelFormat
// Recommended DDI buffer translation programming values
struct DdiPhyConfigEntry {
uint32_t entry2;
uint32_t entry1;
};
// The tables below have the values recommended by the documentation.
//
// Kaby Lake: IHD-OS-KBL-Vol 12-1.17 pages 187-190
// Skylake: IHD-OS-SKL-Vol 12-05.16 pages 181-183
//
// TODO(https://fxbug.dev/42059656): Per-entry Iboost values.
constexpr DdiPhyConfigEntry kPhyConfigDpSkylakeHs[9] = {
{0x000000a0, 0x00002016}, {0x0000009b, 0x00005012}, {0x00000088, 0x00007011},
{0x000000c0, 0x80009010}, {0x0000009b, 0x00002016}, {0x00000088, 0x00005012},
{0x000000c0, 0x80007011}, {0x000000df, 0x00002016}, {0x000000c0, 0x80005012},
};
constexpr DdiPhyConfigEntry kPhyConfigDpSkylakeY[9] = {
{0x000000a2, 0x00000018}, {0x00000088, 0x00005012}, {0x000000cd, 0x80007011},
{0x000000c0, 0x80009010}, {0x0000009d, 0x00000018}, {0x000000c0, 0x80005012},
{0x000000c0, 0x80007011}, {0x00000088, 0x00000018}, {0x000000c0, 0x80005012},
};
constexpr DdiPhyConfigEntry kPhyConfigDpSkylakeU[9] = {
{0x000000a2, 0x0000201b}, {0x00000088, 0x00005012}, {0x000000cd, 0x80007011},
{0x000000c0, 0x80009010}, {0x0000009d, 0x0000201b}, {0x000000c0, 0x80005012},
{0x000000c0, 0x80007011}, {0x00000088, 0x00002016}, {0x000000c0, 0x80005012},
};
constexpr DdiPhyConfigEntry kPhyConfigDpKabyLakeHs[9] = {
{0x000000a0, 0x00002016}, {0x0000009b, 0x00005012}, {0x00000088, 0x00007011},
{0x000000c0, 0x80009010}, {0x0000009b, 0x00002016}, {0x00000088, 0x00005012},
{0x000000c0, 0x80007011}, {0x00000097, 0x00002016}, {0x000000c0, 0x80005012},
};
constexpr DdiPhyConfigEntry kPhyConfigDpKabyLakeY[9] = {
{0x000000a1, 0x00001017}, {0x00000088, 0x00005012}, {0x000000cd, 0x80007011},
{0x000000c0, 0x8000800f}, {0x0000009d, 0x00001017}, {0x000000c0, 0x80005012},
{0x000000c0, 0x80007011}, {0x0000004c, 0x00001017}, {0x000000c0, 0x80005012},
};
constexpr DdiPhyConfigEntry kPhyConfigDpKabyLakeU[9] = {
{0x000000a1, 0x0000201b}, {0x00000088, 0x00005012}, {0x000000cd, 0x80007011},
{0x000000c0, 0x80009010}, {0x0000009d, 0x0000201b}, {0x000000c0, 0x80005012},
{0x000000c0, 0x80007011}, {0x0000004f, 0x00002016}, {0x000000c0, 0x80005012},
};
constexpr DdiPhyConfigEntry kPhyConfigEdpKabyLakeHs[10] = {
{0x000000a8, 0x00000018}, {0x000000a9, 0x00004013}, {0x000000a2, 0x00007011},
{0x0000009c, 0x00009010}, {0x000000a9, 0x00000018}, {0x000000a2, 0x00006013},
{0x000000a6, 0x00007011}, {0x000000ab, 0x00000018}, {0x0000009f, 0x00007013},
{0x000000df, 0x00000018},
};
constexpr DdiPhyConfigEntry kPhyConfigEdpKabyLakeY[10] = {
{0x000000a8, 0x00000018}, {0x000000ab, 0x00004013}, {0x000000a4, 0x00007011},
{0x000000df, 0x00009010}, {0x000000aa, 0x00000018}, {0x000000a4, 0x00006013},
{0x0000009d, 0x00007011}, {0x000000a0, 0x00000018}, {0x000000df, 0x00006012},
{0x0000008a, 0x00000018},
};
constexpr DdiPhyConfigEntry kPhyConfigEdpKabyLakeU[10] = {
{0x000000a8, 0x00000018}, {0x000000a9, 0x00004013}, {0x000000a2, 0x00007011},
{0x0000009c, 0x00009010}, {0x000000a9, 0x00000018}, {0x000000a2, 0x00006013},
{0x000000a6, 0x00007011}, {0x000000ab, 0x00002016}, {0x0000009f, 0x00005013},
{0x000000df, 0x00000018},
};
cpp20::span<const DdiPhyConfigEntry> GetDpPhyConfigEntries(uint16_t device_id, uint8_t* i_boost) {
if (is_skl(device_id)) {
if (is_skl_u(device_id)) {
*i_boost = 0x1;
return kPhyConfigDpSkylakeU;
}
if (is_skl_y(device_id)) {
*i_boost = 0x3;
return kPhyConfigDpSkylakeY;
}
*i_boost = 0x1;
return kPhyConfigDpSkylakeHs;
}
if (is_kbl(device_id)) {
if (is_kbl_u(device_id)) {
*i_boost = 0x1;
return kPhyConfigDpKabyLakeU;
}
if (is_kbl_y(device_id)) {
*i_boost = 0x3;
return kPhyConfigDpKabyLakeY;
}
*i_boost = 0x3;
return kPhyConfigDpKabyLakeHs;
}
zxlogf(ERROR, "Unsupported i915 device id: %x", device_id);
*i_boost = 0;
return {};
}
cpp20::span<const DdiPhyConfigEntry> GetEdpPhyConfigEntries(uint16_t device_id, uint8_t* i_boost) {
*i_boost = 0x0;
if (is_skl_u(device_id) || is_kbl_u(device_id)) {
return kPhyConfigEdpKabyLakeU;
}
if (is_skl_y(device_id) || is_kbl_y(device_id)) {
return kPhyConfigEdpKabyLakeY;
}
return kPhyConfigEdpKabyLakeHs;
}
// Aux port functions
// 4-bit request type in Aux channel request messages.
enum {
DP_REQUEST_I2C_WRITE = 0,
DP_REQUEST_I2C_READ = 1,
DP_REQUEST_NATIVE_WRITE = 8,
DP_REQUEST_NATIVE_READ = 9,
};
// 4-bit statuses in Aux channel reply messages.
enum {
DP_REPLY_AUX_ACK = 0,
DP_REPLY_AUX_NACK = 1,
DP_REPLY_AUX_DEFER = 2,
DP_REPLY_I2C_NACK = 4,
DP_REPLY_I2C_DEFER = 8,
};
std::string DpcdRevisionToString(dpcd::Revision rev) {
switch (rev) {
case dpcd::Revision::k1_0:
return "DPCD r1.0";
case dpcd::Revision::k1_1:
return "DPCD r1.1";
case dpcd::Revision::k1_2:
return "DPCD r1.2";
case dpcd::Revision::k1_3:
return "DPCD r1.3";
case dpcd::Revision::k1_4:
return "DPCD r1.4";
}
return "unknown";
}
std::string EdpDpcdRevisionToString(dpcd::EdpRevision rev) {
switch (rev) {
case dpcd::EdpRevision::k1_1:
return "eDP v1.1 or lower";
case dpcd::EdpRevision::k1_2:
return "eDP v1.2";
case dpcd::EdpRevision::k1_3:
return "eDP v1.3";
case dpcd::EdpRevision::k1_4:
return "eDP v1.4";
case dpcd::EdpRevision::k1_4a:
return "eDP v1.4a";
case dpcd::EdpRevision::k1_4b:
return "eDP v1.4b";
}
return "unknown";
}
} // namespace
zx::result<DdiAuxChannel::ReplyInfo> DpAux::DoTransaction(const DdiAuxChannel::Request& request,
cpp20::span<uint8_t> reply_data_buffer) {
// If the DisplayPort sink device isn't ready to handle an Aux message,
// it can return an AUX_DEFER reply, which means we should retry the
// request. The spec added a requirement for >=7 defer retries in v1.3,
// but there are no requirements before that nor is there a max value. 16
// retries is pretty arbitrary and might need to be increased for slower
// displays.
const int kMaxDefers = 16;
// Per table 2-43 in v1.1a, we need to retry >3 times, since some
// DisplayPort sink devices time out on the first DP aux request
// but succeed on later requests.
const int kMaxTimeouts = 5;
unsigned defers_seen = 0;
unsigned timeouts_seen = 0;
for (;;) {
zx::result<DdiAuxChannel::ReplyInfo> transaction_result =
aux_channel_.DoTransaction(request, reply_data_buffer);
if (transaction_result.is_error()) {
if (transaction_result.error_value() == ZX_ERR_IO_MISSED_DEADLINE) {
if (++timeouts_seen == kMaxTimeouts) {
zxlogf(DEBUG, "DP aux: Got too many timeouts (%d)", kMaxTimeouts);
return transaction_result;
}
// Retry on timeout.
continue;
}
// We do not retry if sending the raw message failed for
// an unexpected reason.
return transaction_result;
}
uint8_t header_byte = transaction_result->reply_header;
uint8_t padding = header_byte & 0xf;
uint8_t status = static_cast<uint8_t>(header_byte >> 4);
// Sanity check: The padding should be zero. If it's not, we
// shouldn't return an error, in case this space gets used for some
// later extension to the protocol. But report it, in case this
// indicates some problem.
if (padding) {
zxlogf(INFO, "DP aux: Reply header padding is non-zero (header byte: 0x%x)", header_byte);
}
switch (status) {
case DP_REPLY_AUX_ACK:
// The AUX_ACK implies that we got an I2C ACK too.
return transaction_result;
case DP_REPLY_AUX_NACK:
zxlogf(TRACE, "DP aux: Reply was not an ack (got AUX_NACK)");
return zx::error_result(ZX_ERR_IO_REFUSED);
case DP_REPLY_AUX_DEFER:
if (++defers_seen == kMaxDefers) {
zxlogf(TRACE, "DP aux: Received too many AUX DEFERs (%d)", kMaxDefers);
return zx::error_result(ZX_ERR_IO_MISSED_DEADLINE);
}
// Go around the loop again to retry.
continue;
case DP_REPLY_I2C_NACK:
zxlogf(TRACE, "DP aux: Reply was not an ack (got I2C_NACK)");
return zx::error_result(ZX_ERR_IO_REFUSED);
case DP_REPLY_I2C_DEFER:
// TODO(https://fxbug.dev/42106274): Implement handling of I2C_DEFER.
zxlogf(TRACE, "DP aux: Received I2C_DEFER (not implemented)");
return zx::error_result(ZX_ERR_NEXT);
default:
zxlogf(TRACE, "DP aux: Unrecognized reply (header byte: 0x%x)", header_byte);
return zx::error_result(ZX_ERR_IO_DATA_INTEGRITY);
}
}
}
zx_status_t DpAux::DpAuxRead(uint32_t dp_cmd, uint32_t addr, uint8_t* buf, size_t size) {
while (size > 0) {
uint32_t chunk_size = static_cast<uint32_t>(std::min<size_t>(size, DdiAuxChannel::kMaxOpSize));
size_t bytes_read = 0;
zx_status_t status = DpAuxReadChunk(dp_cmd, addr, buf, chunk_size, &bytes_read);
if (status != ZX_OK) {
return status;
}
if (bytes_read == 0) {
// We failed to make progress on the last call. To avoid the
// risk of getting an infinite loop from that happening
// continually, we return.
return ZX_ERR_IO;
}
buf += bytes_read;
size -= bytes_read;
}
return ZX_OK;
}
zx_status_t DpAux::DpAuxReadChunk(uint32_t dp_cmd, uint32_t addr, uint8_t* buf, uint32_t size_in,
size_t* size_out) {
const DdiAuxChannel::Request request = {
.address = static_cast<int32_t>(addr),
.command = static_cast<int8_t>(dp_cmd),
.op_size = static_cast<int8_t>(size_in),
.data = cpp20::span<uint8_t>(),
};
zx::result<DdiAuxChannel::ReplyInfo> result =
DoTransaction(request, cpp20::span<uint8_t>(buf, size_in));
if (result.is_error()) {
return result.error_value();
}
// The cast is not UB because `reply_data_size` is guaranteed to be between
// 1 and 16.
const size_t bytes_read = static_cast<size_t>(result.value().reply_data_size);
if (static_cast<size_t>(bytes_read) > size_in) {
zxlogf(WARNING, "DP aux read: Reply was larger than requested");
return ZX_ERR_IO;
}
*size_out = bytes_read;
return ZX_OK;
}
zx_status_t DpAux::DpAuxWrite(uint32_t dp_cmd, uint32_t addr, const uint8_t* buf, size_t size) {
// Implement this if it's ever needed
ZX_ASSERT_MSG(size <= 16, "message too large");
const DdiAuxChannel::Request request = {
.address = static_cast<int32_t>(addr),
.command = static_cast<int8_t>(dp_cmd),
.op_size = static_cast<int8_t>(size),
.data = cpp20::span<const uint8_t>(buf, size),
};
// In case of a short write, receives the amount of written bytes.
uint8_t reply_data[1];
zx::result<DdiAuxChannel::ReplyInfo> transaction_result = DoTransaction(request, reply_data);
if (transaction_result.is_error()) {
return transaction_result.error_value();
}
// TODO(https://fxbug.dev/42106274): Handle the case where the hardware did a short write,
// for which we could send the remaining bytes.
if (transaction_result->reply_data_size != 0) {
zxlogf(WARNING, "DP aux write: Unexpected reply size");
return ZX_ERR_IO;
}
return ZX_OK;
}
static constexpr size_t kMaxTransferSize = 255;
zx_status_t DpAux::I2cImplGetMaxTransferSize(uint64_t* out_size) {
*out_size = kMaxTransferSize;
return ZX_OK;
}
zx_status_t DpAux::I2cImplSetBitrate(uint32_t bitrate) {
// no-op for now
return ZX_OK;
}
zx_status_t DpAux::I2cImplTransact(const i2c_impl_op_t* ops, size_t count) {
for (unsigned i = 0; i < count; i++) {
if (ops[i].data_size > kMaxTransferSize) {
return ZX_ERR_INVALID_ARGS;
}
}
if (!ops[count - 1].stop) {
return ZX_ERR_INVALID_ARGS;
}
fbl::AutoLock lock(&lock_);
for (unsigned i = 0; i < count; i++) {
uint8_t* buf = static_cast<uint8_t*>(ops[i].data_buffer);
uint8_t len = static_cast<uint8_t>(ops[i].data_size);
zx_status_t status = ops[i].is_read
? DpAuxRead(DP_REQUEST_I2C_READ, ops[i].address, buf, len)
: DpAuxWrite(DP_REQUEST_I2C_WRITE, ops[i].address, buf, len);
if (status != ZX_OK) {
return status;
}
}
return ZX_OK;
}
ddk::I2cImplProtocolClient DpAux::i2c() {
const i2c_impl_protocol_t i2c{.ops = &i2c_impl_protocol_ops_, .ctx = this};
return ddk::I2cImplProtocolClient(&i2c);
}
bool DpAux::DpcdRead(uint32_t addr, uint8_t* buf, size_t size) {
fbl::AutoLock lock(&lock_);
constexpr uint32_t kReadAttempts = 3;
for (unsigned i = 0; i < kReadAttempts; i++) {
if (DpAuxRead(DP_REQUEST_NATIVE_READ, addr, buf, size) == ZX_OK) {
return true;
}
zx_nanosleep(zx_deadline_after(ZX_MSEC(5)));
}
return false;
}
bool DpAux::DpcdWrite(uint32_t addr, const uint8_t* buf, size_t size) {
fbl::AutoLock lock(&lock_);
return DpAuxWrite(DP_REQUEST_NATIVE_WRITE, addr, buf, size) == ZX_OK;
}
DpAux::DpAux(fdf::MmioBuffer* mmio_buffer, DdiId ddi_id, uint16_t device_id)
: aux_channel_(mmio_buffer, ddi_id, device_id) {
ZX_ASSERT(mtx_init(&lock_, mtx_plain) == thrd_success);
}
DpCapabilities::DpCapabilities() { dpcd_.fill(0); }
DpCapabilities::Edp::Edp() { bytes.fill(0); }
// static
fpromise::result<DpCapabilities> DpCapabilities::Read(DpcdChannel* dp_aux) {
DpCapabilities caps;
if (!dp_aux->DpcdRead(dpcd::DPCD_CAP_START, caps.dpcd_.data(), caps.dpcd_.size())) {
zxlogf(TRACE, "Failed to read dpcd capabilities");
return fpromise::error();
}
auto dsp_present =
caps.dpcd_reg<dpcd::DownStreamPortPresent, dpcd::DPCD_DOWN_STREAM_PORT_PRESENT>();
if (dsp_present.is_branch()) {
auto dsp_count = caps.dpcd_reg<dpcd::DownStreamPortCount, dpcd::DPCD_DOWN_STREAM_PORT_COUNT>();
zxlogf(DEBUG, "Found branch with %d ports", dsp_count.count());
}
if (!dp_aux->DpcdRead(dpcd::DPCD_SINK_COUNT, caps.sink_count_.reg_value_ptr(), 1)) {
zxlogf(ERROR, "Failed to read DisplayPort sink count");
return fpromise::error();
}
caps.max_lane_count_ = caps.dpcd_reg<dpcd::LaneCount, dpcd::DPCD_MAX_LANE_COUNT>();
if (caps.max_lane_count() != 1 && caps.max_lane_count() != 2 && caps.max_lane_count() != 4) {
zxlogf(ERROR, "Unsupported DisplayPort lane count: %u", caps.max_lane_count());
return fpromise::error();
}
if (!caps.ProcessEdp(dp_aux)) {
return fpromise::error();
}
if (!caps.ProcessSupportedLinkRates(dp_aux)) {
return fpromise::error();
}
ZX_ASSERT(!caps.supported_link_rates_mbps_.empty());
return fpromise::ok(std::move(caps));
}
bool DpCapabilities::ProcessEdp(DpcdChannel* dp_aux) {
// Check if the Display Control registers reserved for eDP are available.
auto edp_config = dpcd_reg<dpcd::EdpConfigCap, dpcd::DPCD_EDP_CONFIG>();
if (!edp_config.dpcd_display_ctrl_capable()) {
return true;
}
zxlogf(TRACE, "eDP registers are available");
edp_dpcd_.emplace();
if (!dp_aux->DpcdRead(dpcd::DPCD_EDP_CAP_START, edp_dpcd_->bytes.data(),
edp_dpcd_->bytes.size())) {
zxlogf(ERROR, "Failed to read eDP capabilities");
return false;
}
edp_dpcd_->revision = dpcd::EdpRevision(edp_dpcd_at(dpcd::DPCD_EDP_REV));
auto general_cap1 = edp_dpcd_reg<dpcd::EdpGeneralCap1, dpcd::DPCD_EDP_GENERAL_CAP1>();
auto backlight_cap = edp_dpcd_reg<dpcd::EdpBacklightCap, dpcd::DPCD_EDP_BACKLIGHT_CAP>();
edp_dpcd_->backlight_aux_power =
general_cap1.tcon_backlight_adjustment_cap() && general_cap1.backlight_aux_enable_cap();
edp_dpcd_->backlight_aux_brightness =
general_cap1.tcon_backlight_adjustment_cap() && backlight_cap.brightness_aux_set_cap();
return true;
}
bool DpCapabilities::ProcessSupportedLinkRates(DpcdChannel* dp_aux) {
ZX_ASSERT(supported_link_rates_mbps_.empty());
// According to eDP v1.4b, Table 4-24, a device supporting eDP version v1.4 and higher can support
// link rate selection by way of both the DPCD MAX_LINK_RATE register and the "Link Rate Table"
// method via DPCD SUPPORTED_LINK_RATES registers.
//
// The latter method can represent more values than the former (which is limited to only 4
// discrete values). Hence we attempt to use the "Link Rate Table" method first.
use_link_rate_table_ = false;
if (edp_dpcd_ && edp_dpcd_->revision >= dpcd::EdpRevision::k1_4) {
constexpr size_t kBufferSize =
dpcd::DPCD_SUPPORTED_LINK_RATE_END - dpcd::DPCD_SUPPORTED_LINK_RATE_START + 1;
std::array<uint8_t, kBufferSize> link_rates;
if (dp_aux->DpcdRead(dpcd::DPCD_SUPPORTED_LINK_RATE_START, link_rates.data(), kBufferSize)) {
for (size_t i = 0; i < link_rates.size(); i += 2) {
uint16_t value = link_rates[i] | (static_cast<uint16_t>(link_rates[i + 1] << 8));
// From the eDP specification: "A table entry containing the value 0 indicates that the
// entry and all entries at higher DPCD addressess contain invalid link rates."
if (value == 0) {
break;
}
// Each valid entry indicates a nominal per-lane link rate equal to `value * 200kHz`. We
// convert value to MHz: `value * 200 / 1000 ==> value / 5`.
supported_link_rates_mbps_.push_back(value / 5);
}
}
use_link_rate_table_ = !supported_link_rates_mbps_.empty();
}
// Fall back to the MAX_LINK_RATE register if the Link Rate Table method is not supported.
if (supported_link_rates_mbps_.empty()) {
uint32_t max_link_rate = dpcd_reg<dpcd::LinkBw, dpcd::DPCD_MAX_LINK_RATE>().link_bw();
// All link rates including and below the maximum are supported.
switch (max_link_rate) {
case dpcd::LinkBw::k8100Mbps:
supported_link_rates_mbps_.push_back(8100);
__FALLTHROUGH;
case dpcd::LinkBw::k5400Mbps:
supported_link_rates_mbps_.push_back(5400);
__FALLTHROUGH;
case dpcd::LinkBw::k2700Mbps:
supported_link_rates_mbps_.push_back(2700);
__FALLTHROUGH;
case dpcd::LinkBw::k1620Mbps:
supported_link_rates_mbps_.push_back(1620);
break;
case 0:
zxlogf(ERROR, "Device did not report supported link rates");
return false;
default:
zxlogf(ERROR, "Unsupported max link rate: %u", max_link_rate);
return false;
}
// Make sure the values are in ascending order.
std::reverse(supported_link_rates_mbps_.begin(), supported_link_rates_mbps_.end());
}
return true;
}
void DpCapabilities::PublishToInspect(inspect::Node* caps_node) const {
ZX_ASSERT(caps_node);
caps_node->RecordString("dpcd_revision", DpcdRevisionToString(dpcd_revision()));
caps_node->RecordUint("sink_count", sink_count());
caps_node->RecordUint("max_lane_count", max_lane_count());
{
auto node = caps_node->CreateUintArray("supported_link_rates_mbps_per_lane",
supported_link_rates_mbps().size());
for (size_t i = 0; i < supported_link_rates_mbps().size(); ++i) {
node.Add(i, supported_link_rates_mbps()[i]);
}
caps_node->Record(std::move(node));
}
{
const std::string value =
edp_revision().has_value() ? EdpDpcdRevisionToString(*edp_revision()) : "not supported";
caps_node->RecordString("edp_revision", value);
}
}
bool DpDisplay::EnsureEdpPanelIsPoweredOn() {
// Fix the panel configuration, if necessary.
const PchPanelParameters panel_parameters = pch_engine_->PanelParameters();
PchPanelParameters fixed_panel_parameters = panel_parameters;
fixed_panel_parameters.Fix();
if (panel_parameters != fixed_panel_parameters) {
zxlogf(WARNING, "Incorrect PCH configuration for eDP panel. Re-configuring.");
}
pch_engine_->SetPanelParameters(fixed_panel_parameters);
zxlogf(TRACE, "Setting eDP backlight brightness to %f", backlight_brightness_);
pch_engine_->SetPanelBrightness(backlight_brightness_);
zxlogf(TRACE, "eDP panel configured.");
// Power up the panel, if necessary.
PchPanelPowerTarget power_target = pch_engine_->PanelPowerTarget();
// The boot firmware might have left `force_power_on` set to true. To avoid
// turning the panel off and on (and get the associated HPD interrupts), we
// need to leave `force_power_on` as-is while we perform PCH-managed panel
// power sequencing. Once the PCH keeps the panel on, we can set
// `force_power_on` to false.
power_target.power_on = true;
// At least one Tiger Lake laptop panel fails to light up if we don't keep the
// PWM counter disabled through the panel power sequence.
power_target.brightness_pwm_counter_on = false;
pch_engine_->SetPanelPowerTarget(power_target);
// The Atlas panel takes more time to power up than required in the eDP and
// SPWG Notebook Panel standards.
//
// The generous timeout is chosen because we really don't want to give up too
// early and leave the user with a non-working system, if there's any hope.
// The waiting code polls the panel state every few ms, so we don't waste too
// much time if the panel wakes up early / on time.
static constexpr int kPowerUpTimeoutUs = 1'000'000;
if (!pch_engine_->WaitForPanelPowerState(PchPanelPowerState::kPoweredUp, kPowerUpTimeoutUs)) {
zxlogf(ERROR, "Failed to enable panel!");
pch_engine_->Log();
return false;
}
// The PCH panel power sequence has completed. Now it's safe to set
// `force_power_on` to false, if it was true. The PCH will keep the panel
// powered on.
power_target.backlight_on = true;
power_target.brightness_pwm_counter_on = true;
power_target.force_power_on = false;
pch_engine_->SetPanelPowerTarget(power_target);
zxlogf(TRACE, "eDP panel powered on.");
return true;
}
bool DpDisplay::DpcdWrite(uint32_t addr, const uint8_t* buf, size_t size) {
return dp_aux_->DpcdWrite(addr, buf, size);
}
bool DpDisplay::DpcdRead(uint32_t addr, uint8_t* buf, size_t size) {
return dp_aux_->DpcdRead(addr, buf, size);
}
// Link training functions
// Tell the sink device to start link training.
bool DpDisplay::DpcdRequestLinkTraining(const dpcd::TrainingPatternSet& tp_set,
const dpcd::TrainingLaneSet lane[]) {
// The DisplayPort spec says that we are supposed to write these
// registers with a single operation: "The AUX CH burst write must be
// used for writing to TRAINING_LANEx_SET bytes of the enabled lanes."
// (From section 3.5.1.3, "Link Training", in v1.1a.)
uint8_t reg_bytes[1 + dp_lane_count_];
reg_bytes[0] = static_cast<uint8_t>(tp_set.reg_value());
for (unsigned i = 0; i < dp_lane_count_; i++) {
reg_bytes[i + 1] = static_cast<uint8_t>(lane[i].reg_value());
}
constexpr int kAddr = dpcd::DPCD_TRAINING_PATTERN_SET;
static_assert(kAddr + 1 == dpcd::DPCD_TRAINING_LANE0_SET, "");
static_assert(kAddr + 2 == dpcd::DPCD_TRAINING_LANE1_SET, "");
static_assert(kAddr + 3 == dpcd::DPCD_TRAINING_LANE2_SET, "");
static_assert(kAddr + 4 == dpcd::DPCD_TRAINING_LANE3_SET, "");
if (!DpcdWrite(kAddr, reg_bytes, 1 + dp_lane_count_)) {
zxlogf(ERROR, "Failure setting TRAINING_PATTERN_SET");
return false;
}
return true;
}
template <uint32_t addr, typename T>
bool DpDisplay::DpcdReadPairedRegs(hwreg::RegisterBase<T, typename T::ValueType>* regs) {
static_assert(addr == dpcd::DPCD_LANE0_1_STATUS || addr == dpcd::DPCD_ADJUST_REQUEST_LANE0_1,
"Bad register address");
uint32_t num_bytes = dp_lane_count_ == 4 ? 2 : 1;
uint8_t reg_byte[num_bytes];
if (!DpcdRead(addr, reg_byte, num_bytes)) {
zxlogf(ERROR, "Failure reading addr %d", addr);
return false;
}
for (unsigned i = 0; i < dp_lane_count_; i++) {
regs[i].set_reg_value(reg_byte[i / 2]);
}
return true;
}
bool DpDisplay::DpcdHandleAdjustRequest(dpcd::TrainingLaneSet* training,
dpcd::AdjustRequestLane* adjust) {
bool voltage_changed = false;
uint8_t voltage_swing = 0;
uint8_t pre_emphasis = 0;
for (int lane_index = 0; lane_index < dp_lane_count_; ++lane_index) {
if (adjust[lane_index].voltage_swing(lane_index).get() > voltage_swing) {
// The cast is lossless because voltage_swing() is a 2-bit field.
voltage_swing = static_cast<uint8_t>(adjust[lane_index].voltage_swing(lane_index).get());
}
if (adjust[lane_index].pre_emphasis(lane_index).get() > pre_emphasis) {
// The cast is lossless because pre-emphasis() is a 2-bit field.
pre_emphasis = static_cast<uint8_t>(adjust[lane_index].pre_emphasis(lane_index).get());
}
}
// In the Recommended buffer translation programming for DisplayPort from the intel display
// doc, the max voltage swing is 2/3 for DP/eDP and the max (voltage swing + pre-emphasis) is
// 3. According to the v1.1a of the DP docs, if v + pe is too large then v should be reduced
// to the highest supported value for the pe level (section 3.5.1.3)
static constexpr uint32_t kMaxVoltageSwingPlusPreEmphasis = 3;
if (voltage_swing + pre_emphasis > kMaxVoltageSwingPlusPreEmphasis) {
voltage_swing = static_cast<uint8_t>(kMaxVoltageSwingPlusPreEmphasis - pre_emphasis);
}
const uint8_t max_port_voltage = controller()->igd_opregion().IsLowVoltageEdp(ddi_id()) ? 3 : 2;
if (voltage_swing > max_port_voltage) {
voltage_swing = max_port_voltage;
}
for (int lane_index = 0; lane_index < dp_lane_count_; lane_index++) {
voltage_changed |= (training[lane_index].voltage_swing_set() != voltage_swing);
training[lane_index].set_voltage_swing_set(voltage_swing);
training[lane_index].set_max_swing_reached(voltage_swing == max_port_voltage);
training[lane_index].set_pre_emphasis_set(pre_emphasis);
training[lane_index].set_max_pre_emphasis_set(pre_emphasis + voltage_swing ==
kMaxVoltageSwingPlusPreEmphasis);
}
// Compute the index into the PHY configuration table.
static constexpr int kFirstEntryForVoltageSwingLevel[] = {0, 4, 7, 9};
// The array access is safe because `voltage_swing` + `pre_emphasis` is at
// most 3. For the same reason, each (voltage_swing, pre_emphasis) index will
// result in a different entry
const int phy_config_index = kFirstEntryForVoltageSwingLevel[voltage_swing] + pre_emphasis;
ZX_ASSERT(phy_config_index < 10);
if (phy_config_index == 9) {
// Entry 9 in the PHY configuration table is only usable for DisplayPort on
// DDIs A and E, to support eDP displays. On DDIs B-D, entry 9 is dedicated
// to HDMI.
//
// Voltage swing level 3 is only valid for eDP, so we should be on DDI A or
// E, and should be servicing an eDP port.
ZX_ASSERT(controller()->igd_opregion().IsLowVoltageEdp(ddi_id()));
ZX_ASSERT(ddi_id() == 0 || ddi_id() == 4);
}
if (is_tgl(controller()->device_id())) {
ConfigureVoltageSwingTigerLake(phy_config_index);
} else {
ConfigureVoltageSwingKabyLake(phy_config_index);
}
return voltage_changed;
}
void DpDisplay::ConfigureVoltageSwingKabyLake(size_t phy_config_index) {
ZX_DEBUG_ASSERT_MSG(phy_config_index <= std::numeric_limits<uint32_t>::max(),
"%zu overflows uint32_t", phy_config_index);
registers::DdiRegs ddi_regs(ddi_id());
auto buffer_control = ddi_regs.BufferControl().ReadFrom(mmio_space());
buffer_control.set_display_port_phy_config_kaby_lake(static_cast<uint32_t>(phy_config_index));
buffer_control.WriteTo(mmio_space());
}
void DpDisplay::ConfigureVoltageSwingTigerLake(size_t phy_config_index) {
switch (ddi_id()) {
case DdiId::DDI_TC_1:
case DdiId::DDI_TC_2:
case DdiId::DDI_TC_3:
case DdiId::DDI_TC_4:
case DdiId::DDI_TC_5:
case DdiId::DDI_TC_6:
ConfigureVoltageSwingTypeCTigerLake(phy_config_index);
return;
case DdiId::DDI_A:
case DdiId::DDI_B:
case DdiId::DDI_C:
ConfigureVoltageSwingComboTigerLake(phy_config_index);
return;
default:
ZX_DEBUG_ASSERT_MSG(false, "Unreachable");
return;
}
}
void DpDisplay::ConfigureVoltageSwingTypeCTigerLake(size_t phy_config_index) {
// This table is from "Voltage Swing Programming Sequence > DP Voltage Swing
// Table" Section of Intel Display Programming Manual. It contains control
// register fields for each Voltage Swing Config.
//
// Tiger Lake: IHD-OS-TGL-Vol 12-1.22-Rev 2.0
struct VoltageSwingConfig {
uint32_t vswing_control = 0;
uint32_t preshoot_control = 0;
uint32_t de_emphasis_control = 0;
};
constexpr VoltageSwingConfig kVoltageSwingConfigTable[] = {
{.vswing_control = 0x7, .preshoot_control = 0x0, .de_emphasis_control = 0x0},
{.vswing_control = 0x5, .preshoot_control = 0x0, .de_emphasis_control = 0x5},
{.vswing_control = 0x2, .preshoot_control = 0x0, .de_emphasis_control = 0xB},
// Assume HBR2 is always used for Voltage Swing Level 0, Pre-emphasis 3
{.vswing_control = 0x0, .preshoot_control = 0x0, .de_emphasis_control = 0x19},
{.vswing_control = 0x5, .preshoot_control = 0x0, .de_emphasis_control = 0x0},
{.vswing_control = 0x2, .preshoot_control = 0x0, .de_emphasis_control = 0x8},
{.vswing_control = 0x0, .preshoot_control = 0x0, .de_emphasis_control = 0x14},
{.vswing_control = 0x2, .preshoot_control = 0x0, .de_emphasis_control = 0x0},
{.vswing_control = 0x0, .preshoot_control = 0x0, .de_emphasis_control = 0xB},
{.vswing_control = 0x0, .preshoot_control = 0x0, .de_emphasis_control = 0x0},
};
for (auto tx_lane : {0, 1}) {
// Flush PMD_LANE_SUS register if display owns this PHY lane.
registers::DekelTransmitterPmdLaneSus::GetForLaneDdi(tx_lane, ddi_id())
.FromValue(0)
.WriteTo(mmio_space());
// Update DisplayPort control registers with appropriate voltage swing and
// de-emphasis levels from the table.
auto display_port_control_0 =
registers::DekelTransmitterDisplayPortControl0::GetForLaneDdi(tx_lane, ddi_id())
.ReadFrom(mmio_space());
display_port_control_0
.set_voltage_swing_control_level_transmitter_1(
kVoltageSwingConfigTable[phy_config_index].vswing_control)
.set_preshoot_coefficient_transmitter_1(
kVoltageSwingConfigTable[phy_config_index].preshoot_control)
.set_de_emphasis_coefficient_transmitter_1(
kVoltageSwingConfigTable[phy_config_index].de_emphasis_control)
.WriteTo(mmio_space());
auto display_port_control_1 =
registers::DekelTransmitterDisplayPortControl1::GetForLaneDdi(tx_lane, ddi_id())
.ReadFrom(mmio_space());
display_port_control_1
.set_voltage_swing_control_level_transmitter_2(
kVoltageSwingConfigTable[phy_config_index].vswing_control)
.set_preshoot_coefficient_transmitter_2(
kVoltageSwingConfigTable[phy_config_index].preshoot_control)
.set_de_emphasis_coefficient_transmitter_2(
kVoltageSwingConfigTable[phy_config_index].de_emphasis_control)
.WriteTo(mmio_space());
auto display_port_control_2 =
registers::DekelTransmitterDisplayPortControl2::GetForLaneDdi(tx_lane, ddi_id())
.ReadFrom(mmio_space());
display_port_control_2.set_display_port_20bit_mode_supported(0).WriteTo(mmio_space());
}
}
void DpDisplay::ConfigureVoltageSwingComboTigerLake(size_t phy_config_index) {
// This implements the "Digital Display Interface" > "Combo PHY DDI Buffer" >
// "Voltage Swing Programming Sequence" section in the display PRMs.
//
// Tiger Lake: IHD-OS-TGL-Vol 12-1.22-Rev2.0 pages 392-395
// DG1: IHD-OS-DG1-Vol 12-2.21 pages 338-342
// Ice Lake: IHD-OS-ICLLP-Vol 12-1.22-Rev2.0 pages 335-339
zxlogf(TRACE, "Voltage Swing for DDI %d, Link rate %d MHz, PHY config: %d", ddi_id(),
dp_link_rate_mhz_, static_cast<int>(phy_config_index));
zxlogf(TRACE, "Logging pre-configuration register state for debugging");
static constexpr registers::PortLane kMainLinkLanes[] = {
registers::PortLane::kMainLinkLane0, registers::PortLane::kMainLinkLane1,
registers::PortLane::kMainLinkLane2, registers::PortLane::kMainLinkLane3};
for (registers::PortLane lane : kMainLinkLanes) {
auto physical_coding1 =
registers::PortPhysicalCoding1::GetForDdiLane(ddi_id(), lane).ReadFrom(mmio_space());
const int lane_index =
static_cast<int>(lane) - static_cast<int>(registers::PortLane::kMainLinkLane0);
zxlogf(TRACE, "DDI %d Lane %d PORT_PCS_DW1: %08x, common mode keeper: %s", ddi_id(), lane_index,
physical_coding1.reg_value(),
physical_coding1.common_mode_keeper_enabled() ? "enabled" : "disabled");
physical_coding1.set_common_mode_keeper_enabled(true).WriteTo(mmio_space());
}
cpp20::span<const bool> load_generation;
if (dp_link_rate_mhz_ >= 6'000) {
static constexpr bool kHighSpeedLoadGeneration[] = {false, false, false, false};
load_generation = kHighSpeedLoadGeneration;
} else if (dp_lane_count_ == 4) {
static constexpr bool kLowSpeedFullLinkLoadGeneration[] = {false, true, true, true};
load_generation = kLowSpeedFullLinkLoadGeneration;
} else {
static constexpr bool kPartialLinkLoadGeneration[] = {false, true, true, false};
load_generation = kPartialLinkLoadGeneration;
}
for (registers::PortLane lane : kMainLinkLanes) {
auto lane_equalization = registers::PortTransmitterEqualization::GetForDdiLane(ddi_id(), lane)
.ReadFrom(mmio_space());
const int lane_index =
static_cast<int>(lane) - static_cast<int>(registers::PortLane::kMainLinkLane0);
zxlogf(TRACE,
"DDI %d Lane %d PORT_TX_DW4: %08x, load generation select: %d, equalization "
"C0: %02x C1: %02x C2: %02x",
ddi_id(), lane_index, lane_equalization.reg_value(),
lane_equalization.load_generation_select(), lane_equalization.cursor_coefficient(),
lane_equalization.post_cursor_coefficient1(),
lane_equalization.post_cursor_coefficient2());
lane_equalization.set_load_generation_select(load_generation[lane_index]).WriteTo(mmio_space());
}
auto common_lane5 = registers::PortCommonLane5::GetForDdi(ddi_id()).ReadFrom(mmio_space());
zxlogf(TRACE, "DDI %d PORT_CL_DW5 %08x, suspend clock config %d", ddi_id(),
common_lane5.reg_value(), common_lane5.suspend_clock_config());
common_lane5.set_suspend_clock_config(0b11).WriteTo(mmio_space());
// Lane training must be disabled while we configure new voltage settings into
// the AFE (Analog Front-End) registers.
for (registers::PortLane lane : kMainLinkLanes) {
auto lane_voltage =
registers::PortTransmitterVoltage::GetForDdiLane(ddi_id(), lane).ReadFrom(mmio_space());
const int lane_index =
static_cast<int>(lane) - static_cast<int>(registers::PortLane::kMainLinkLane0);
zxlogf(TRACE,
"DDI %d Lane %d PORT_TX_DW5: %08x, scaling mode select: %d, "
"terminating resistor select: %d, equalization 3-tap: %s 2-tap: %s, "
"cursor programming: %s, coefficient polarity: %s",
ddi_id(), lane_index, lane_voltage.reg_value(), lane_voltage.scaling_mode_select(),
lane_voltage.terminating_resistor_select(),
lane_voltage.three_tap_equalization_disabled() ? "disabled" : "enabled",
lane_voltage.two_tap_equalization_disabled() ? "disabled" : "enabled",
lane_voltage.cursor_programming_disabled() ? "disabled" : "enabled",
lane_voltage.coefficient_polarity_disabled() ? "disabled" : "enabled");
lane_voltage.set_training_enabled(false).WriteTo(mmio_space());
}
// The ordering of the fields matches the column order in the "Voltage Swing
// Programming" table. The post-cursor is omitted because it can be derived by
// solving the equation cursor + post_cursor = 0x3f. It is not surprising that
// the coefficients of a 2-tap equalizer add up to (a fixed-point
// representation of) 1.
struct ComboSwingConfig {
uint8_t swing_select;
uint8_t n_scalar;
uint8_t cursor;
};
cpp20::span<const ComboSwingConfig> swing_configs;
// TODO(https://fxbug.dev/42065201):
const int use_edp_voltages = false;
if (use_edp_voltages) {
if (dp_link_rate_mhz_ <= 5'400) { // Up to HBR2
static constexpr ComboSwingConfig kEmbeddedDisplayPortHbr2Configs[] = {
// Voltage swing 0, pre-emphasis levels 0-3
{.swing_select = 0b0000, .n_scalar = 0x7f, .cursor = 0x3f},
{.swing_select = 0b1000, .n_scalar = 0x7f, .cursor = 0x38},
{.swing_select = 0b0001, .n_scalar = 0x7f, .cursor = 0x33},
{.swing_select = 0b1001, .n_scalar = 0x7f, .cursor = 0x31},
// Voltage swing 1, pre-emphasis levels 0-2
{.swing_select = 0b1000, .n_scalar = 0x7f, .cursor = 0x3f},
{.swing_select = 0b0001, .n_scalar = 0x7f, .cursor = 0x38},
{.swing_select = 0b1001, .n_scalar = 0x7f, .cursor = 0x33},
// Voltage swing 2, pre-emphasis levels 0-1
{.swing_select = 0b0001, .n_scalar = 0x7f, .cursor = 0x3f},
{.swing_select = 0b1001, .n_scalar = 0x7f, .cursor = 0x38},
// Voltage swing 3, pre-emphasis level 0
{.swing_select = 0b1001, .n_scalar = 0x7f, .cursor = 0x3f},
// Optimized config, opt-in via VBT.
// TODO(https://fxbug.dev/42065768): This entry is currently unused.
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x3f},
};
swing_configs = kEmbeddedDisplayPortHbr2Configs;
} else { // Up to HBR3
// The "XED Overview" > "Port Configurations" section on
// IHD-OS-TGL-Vol 12-1.22-Rev2.0 page 113 states that combo PHYs support
// HBR3, but only for eDP (Embedded DisplayPort). DisplayPort connections
// can only go up to HBR2.
static constexpr ComboSwingConfig kEmbeddedDisplayPortHbr3Configs[] = {
// Voltage swing 0, pre-emphasis levels 0-3
{.swing_select = 0b1010, .n_scalar = 0x35, .cursor = 0x3f},
{.swing_select = 0b1010, .n_scalar = 0x4f, .cursor = 0x37},
{.swing_select = 0b1100, .n_scalar = 0x71, .cursor = 0x2f},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x2b},
// Voltage swing 1, pre-emphasis levels 0-2
{.swing_select = 0b1010, .n_scalar = 0x4c, .cursor = 0x3f},
{.swing_select = 0b1100, .n_scalar = 0x73, .cursor = 0x34},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x2f},
// Voltage swing 2, pre-emphasis levels 0-1
{.swing_select = 0b1100, .n_scalar = 0x6c, .cursor = 0x3f},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x35},
// Voltage swing 3, pre-emphasis level 0
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x3f},
};
swing_configs = kEmbeddedDisplayPortHbr3Configs;
}
} else {
if (dp_link_rate_mhz_ <= 2'700) { // Up to HBR
static constexpr ComboSwingConfig kDisplayPortHbrConfigs[] = {
// Voltage swing 0, pre-emphasis levels 0-3
{.swing_select = 0b1010, .n_scalar = 0x32, .cursor = 0x3f},
{.swing_select = 0b1010, .n_scalar = 0x4f, .cursor = 0x37},
{.swing_select = 0b1100, .n_scalar = 0x71, .cursor = 0x2f},
{.swing_select = 0b0110, .n_scalar = 0x7d, .cursor = 0x2b},
// Voltage swing 1, pre-emphasis levels 0-2
{.swing_select = 0b1010, .n_scalar = 0x4c, .cursor = 0x3f},
{.swing_select = 0b1100, .n_scalar = 0x73, .cursor = 0x34},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x2f},
// Voltage swing 2, pre-emphasis levels 0-1
{.swing_select = 0b1100, .n_scalar = 0x4c, .cursor = 0x3c},
{.swing_select = 0b0110, .n_scalar = 0x73, .cursor = 0x35},
// Voltage swing 3, pre-emphasis level 0
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x3f},
};
swing_configs = kDisplayPortHbrConfigs;
} else { // Up to HBR2
if (dp_link_rate_mhz_ >= 5'400) {
// TODO(https://fxbug.dev/42065925): DpDisplay::ComputeDdiPllConfig() should
// reject configs that would entail HBR3 on DisplayPort. Then we can
// have a ZX_ASSERT() / ZX_DEBUG_ASSERT() here.
zxlogf(WARNING,
"Attempting to use unsupported DisplayPort speed on DDI %d which tops out at HBR2",
ddi_id());
}
// The IHD-OS-TGL-Vol 12-1.22-Rev2.0 "Voltage Swing Programming" table on
// pages 393-395 has an ambiguity -- there are two sets of entries labeled
// "DP HBR2", without any further explanation.
//
// We resolve this ambiguity based on the OpenBSD i915 driver, which (in
// intel_ddi_buf_trans.c) uses the 2nd set of entries for "U/Y" SKUs, and
// the 1st set of entries for all other processors.
//
// Y SKUs seem to be undocumented / unreleased, since they're not listed
// in the IHD-OS-TGL-Vol 4-12.21 "Steppings and Device IDs" table on page
// 9. So, we're using the 2nd set of entries for the U SKUs, and the first
// set of entries for the H SKUs.
const uint16_t device_id = controller()->device_id();
// TODO(https://fxbug.dev/42065924): PCI device ID-based selection is insufficient.
// Display engines with PCI device ID 0x9a49 may be UP3 or H35 SKUs.
if (is_tgl_u(device_id)) {
static constexpr ComboSwingConfig kDisplayPortHbr2UConfigs[] = {
// Voltage swing 0, pre-emphasis levels 0-3
{.swing_select = 0b1010, .n_scalar = 0x35, .cursor = 0x3f},
{.swing_select = 0b1010, .n_scalar = 0x4f, .cursor = 0x36},
{.swing_select = 0b1100, .n_scalar = 0x60, .cursor = 0x32},
{.swing_select = 0b1100, .n_scalar = 0x7f, .cursor = 0x2d},
// Voltage swing 1, pre-emphasis levels 0-2
{.swing_select = 0b1100, .n_scalar = 0x47, .cursor = 0x3f},
{.swing_select = 0b1100, .n_scalar = 0x6f, .cursor = 0x36},
{.swing_select = 0b0110, .n_scalar = 0x7d, .cursor = 0x32},
// Voltage swing 2, pre-emphasis levels 0-1
{.swing_select = 0b0110, .n_scalar = 0x60, .cursor = 0x3c},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x34},
// Voltage swing 3, pre-emphasis level 0
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x3f},
};
swing_configs = kDisplayPortHbr2UConfigs;
} else {
static constexpr ComboSwingConfig kDisplayPortHbr2HConfigs[] = {
// Voltage swing 0, pre-emphasis levels 0-3
{.swing_select = 0b1010, .n_scalar = 0x35, .cursor = 0x3f},
{.swing_select = 0b1010, .n_scalar = 0x4f, .cursor = 0x37},
{.swing_select = 0b1100, .n_scalar = 0x63, .cursor = 0x2f},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x2b},
// Voltage swing 1, pre-emphasis levels 0-2
{.swing_select = 0b1010, .n_scalar = 0x47, .cursor = 0x3f},
{.swing_select = 0b1100, .n_scalar = 0x63, .cursor = 0x34},
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x2f},
// Voltage swing 2, pre-emphasis levels 0-1
{.swing_select = 0b1100, .n_scalar = 0x61, .cursor = 0x3c},
{.swing_select = 0b0110, .n_scalar = 0x7b, .cursor = 0x35},
// Voltage swing 3, pre-emphasis level 0
{.swing_select = 0b0110, .n_scalar = 0x7f, .cursor = 0x3f},
};
swing_configs = kDisplayPortHbr2HConfigs;
}
}
}
const ComboSwingConfig& swing_config = swing_configs[phy_config_index];
for (registers::PortLane lane : kMainLinkLanes) {
const int lane_index =
static_cast<int>(lane) - static_cast<int>(registers::PortLane::kMainLinkLane0);
auto lane_voltage_swing = registers::PortTransmitterVoltageSwing::GetForDdiLane(ddi_id(), lane)
.ReadFrom(mmio_space());
zxlogf(TRACE, "DDI %d Lane %d PORT_TX_DW2: %08x, Rcomp scalar: %02x, Swing select: %d",
ddi_id(), lane_index, lane_voltage_swing.reg_value(),
lane_voltage_swing.resistance_compensation_code_scalar(),
lane_voltage_swing.voltage_swing_select());
lane_voltage_swing.set_resistance_compensation_code_scalar(0x98)
.set_voltage_swing_select(swing_config.swing_select)
.WriteTo(mmio_space());
auto lane_equalization = registers::PortTransmitterEqualization::GetForDdiLane(ddi_id(), lane)
.ReadFrom(mmio_space());
lane_equalization.set_cursor_coefficient(swing_config.cursor)
.set_post_cursor_coefficient1(0x3f - swing_config.cursor)
.set_post_cursor_coefficient2(0)
.WriteTo(mmio_space());
auto lane_voltage =
registers::PortTransmitterVoltage::GetForDdiLane(ddi_id(), lane).ReadFrom(mmio_space());
lane_voltage.set_scaling_mode_select(2)
.set_terminating_resistor_select(6)
.set_three_tap_equalization_disabled(true)
.set_two_tap_equalization_disabled(false)
.set_cursor_programming_disabled(false)
.set_coefficient_polarity_disabled(false)
.WriteTo(mmio_space());
auto lane_n_scalar =
registers::PortTransmitterNScalar::GetForDdiLane(ddi_id(), lane).ReadFrom(mmio_space());
zxlogf(TRACE, "DDI %d Lane %d PORT_TX_DW7: %08x, N Scalar: %02x", ddi_id(), lane_index,
lane_n_scalar.reg_value(), lane_n_scalar.n_scalar());
}
// Re-enabling training causes the AFE (Analog Front-End) to pick up the new
// voltage configuration.
for (registers::PortLane lane : kMainLinkLanes) {
auto lane_voltage =
registers::PortTransmitterVoltage::GetForDdiLane(ddi_id(), lane).ReadFrom(mmio_space());
lane_voltage.set_training_enabled(true);
}
// This step follows voltage swing configuration in the "Sequences for
// DisplayPort" > "Enable Sequence" section in the display engine PRMs.
auto common_lane_main_link_power =
registers::PortCommonLaneMainLinkPower::GetForDdi(ddi_id()).ReadFrom(mmio_space());
zxlogf(TRACE,
"DDI %d PORT_CL_DW10 %08x, lanes: 0 %s 1 %s 2 %s 3 %s, eDP power-optimized %s %s, "
"terminating resistor %s %d Ohm",
ddi_id(), common_lane_main_link_power.reg_value(),
common_lane_main_link_power.power_down_lane0() ? "off" : "on",
common_lane_main_link_power.power_down_lane1() ? "off" : "on",
common_lane_main_link_power.power_down_lane2() ? "off" : "on",
common_lane_main_link_power.power_down_lane3() ? "off" : "on",
common_lane_main_link_power.edp_power_optimized_mode_valid() ? "valid" : "invalid",
common_lane_main_link_power.edp_power_optimized_mode_enabled() ? "enabled" : "disabled",
common_lane_main_link_power.terminating_resistor_override_valid() ? "valid" : "invalid",
(common_lane_main_link_power.terminating_resistor_override() ==
registers::PortCommonLaneMainLinkPower::TerminatingResistorOverride::k100Ohms)
? 100
: 150);
if (phy_config_index == 10) {
common_lane_main_link_power.set_edp_power_optimized_mode_valid(true)
.set_edp_power_optimized_mode_enabled(true);
}
common_lane_main_link_power.set_powered_up_lanes(dp_lane_count_).WriteTo(mmio_space());
}
bool DpDisplay::LinkTrainingSetupTigerLake() {
ZX_ASSERT(capabilities_);
ZX_ASSERT(is_tgl(controller()->device_id()));
ZX_ASSERT_MSG(pipe(), "LinkTrainingSetup: Display doesn't have valid pipe");
// Follow the "Enable and Train DisplayPort" procedure at Section
// "Sequences for DisplayPort > Enable Sequence":
//
// Tiger Lake: IHD-OS-TGL-Vol 12-1.22-Rev 2.0, Page 144
// Transcoder must be disabled while doing link training.
registers::TranscoderRegs transcoder_regs(pipe()->connected_transcoder_id());
// Our experiments on NUC 11 indicate that the display engine may crash the
// whole system if the driver sets `enabled_target` to false and writes the
// transcoder configuration register when the transcoder is already disabled,
// so we avoid crashing the system by only writing the register when the
// transcoder is currently enabled.
auto transcoder_config = transcoder_regs.Config().ReadFrom(mmio_space());
if (transcoder_config.enabled()) {
transcoder_config.set_enabled_target(false).WriteTo(mmio_space());
}
// Configure "Transcoder Clock Select" to direct the Port clock to the
// transcoder.
auto clock_select = transcoder_regs.ClockSelect().ReadFrom(mmio_space());
clock_select.set_ddi_clock_tiger_lake(ddi_id());
clock_select.WriteTo(mmio_space());
// Configure "Transcoder DDI Control" to select DDI and DDI mode.
auto ddi_control = transcoder_regs.DdiControl().ReadFrom(mmio_space());
ddi_control.set_ddi_tiger_lake(ddi_id());
// TODO(https://fxbug.dev/42061773): Support MST (Multi-Stream).
ddi_control.set_ddi_mode(registers::TranscoderDdiControl::kModeDisplayPortSingleStream);
ddi_control.WriteTo(mmio_space());
// Configure and enable "DP Transport Control" register with link training
// pattern 1 selected
auto dp_transport_control =
registers::DpTransportControl::GetForTigerLakeTranscoder(pipe()->connected_transcoder_id())
.ReadFrom(mmio_space());
dp_transport_control.set_enabled(true)
.set_is_multi_stream(false)
.set_sst_enhanced_framing(capabilities_->enhanced_frame_capability())
.set_training_pattern(registers::DpTransportControl::kTrainingPattern1)
.WriteTo(mmio_space());
// Start link training at the minimum Voltage Swing level.
ConfigureVoltageSwingTigerLake(/*phy_config_index=*/0);
// TODO(https://fxbug.dev/42056448): On PRM it mentions that, for COMBO PHY, the driver
// needs to configure PORT_CL_DW10 Static Power Down to power up the used
// lanes of the DDI.
// Configure and enable DDI Buffer.
auto buffer_control =
registers::DdiBufferControl::GetForTigerLakeDdi(ddi_id()).ReadFrom(mmio_space());
buffer_control.set_enabled(true)
.set_display_port_lane_count(dp_lane_count_)
.WriteTo(mmio_space());
// Wait for DDI Buffer to be enabled, timeout after 1 ms.
if (!PollUntil([&] { return !buffer_control.ReadFrom(mmio_space()).is_idle(); }, zx::usec(1),
1000)) {
zxlogf(ERROR, "DDI_BUF_CTL DDI idle status timeout");
return false;
}
// Configure DPCD registers.
//
// VESA DP Standard v1.4a Section 3.5.1.2 "Link Training" (Page 618) describes
// the procedure for link training.
//
// This function contains the procedure before starting the link training
// tasks (Clock recovery and Channel equalization).
// Configure Link rate / Link bandwidth.
uint16_t link_rate_reg;
uint8_t link_rate_val;
if (dp_link_rate_table_idx_) {
dpcd::LinkRateSet link_rate_set;
link_rate_set.set_link_rate_idx(static_cast<uint8_t>(dp_link_rate_table_idx_.value()));
link_rate_reg = dpcd::DPCD_LINK_RATE_SET;
link_rate_val = link_rate_set.reg_value();
} else {
uint8_t target_bw;
if (dp_link_rate_mhz_ == 1620) {
target_bw = dpcd::LinkBw::k1620Mbps;
} else if (dp_link_rate_mhz_ == 2700) {
target_bw = dpcd::LinkBw::k2700Mbps;
} else if (dp_link_rate_mhz_ == 5400) {
target_bw = dpcd::LinkBw::k5400Mbps;
} else {
ZX_ASSERT_MSG(dp_link_rate_mhz_ == 8100, "Unrecognized DP link rate: %d Mbps/lane",
dp_link_rate_mhz_);
target_bw = dpcd::LinkBw::k8100Mbps;
}
dpcd::LinkBw bw_setting;
bw_setting.set_link_bw(target_bw);
link_rate_reg = dpcd::DPCD_LINK_BW_SET;
link_rate_val = bw_setting.reg_value();
}
// Configure the bandwidth and lane count settings
dpcd::LaneCount lc_setting;
lc_setting.set_lane_count_set(dp_lane_count_);
lc_setting.set_enhanced_frame_enabled(capabilities_->enhanced_frame_capability());
if (!DpcdWrite(link_rate_reg, &link_rate_val, 1) ||
!DpcdWrite(dpcd::DPCD_COUNT_SET, lc_setting.reg_value_ptr(), 1)) {
zxlogf(ERROR, "DP: Link training: failed to configure settings");
return false;
}
// TODO(https://fxbug.dev/42060757): The procedure above doesn't fully match that
// described in VESA DP Standard v1.4a. For example, DOWNSPREAD_CTRL and
// MAIN_LINK_CHANNEL_CODING_SET registers are not set.
return true;
}
bool DpDisplay::LinkTrainingSetupKabyLake() {
ZX_ASSERT(capabilities_);
ZX_DEBUG_ASSERT(!is_tgl(controller()->device_id()));
registers::DdiRegs ddi_regs(ddi_id());
// Tell the source device to emit the training pattern.
auto dp_transport_control = ddi_regs.DpTransportControl().ReadFrom(mmio_space());
dp_transport_control.set_enabled(true)
.set_is_multi_stream(false)
.set_sst_enhanced_framing(capabilities_->enhanced_frame_capability())
.set_training_pattern(registers::DpTransportControl::kTrainingPattern1)
.WriteTo(mmio_space());
// Configure DDI PHY parameters (voltage swing and pre-emphasis).
//
// Kaby Lake: IHD-OS-KBL-Vol 12-1.17 pages 187-190
// Skylake: IHD-OS-SKL-Vol 12-05.16 pages 181-183
// TODO(https://fxbug.dev/42106274): Read the VBT to handle unique motherboard configs for kaby
// lake
uint8_t i_boost;
const cpp20::span<const DdiPhyConfigEntry> entries =
controller()->igd_opregion().IsLowVoltageEdp(ddi_id())
? GetEdpPhyConfigEntries(controller()->device_id(), &i_boost)
: GetDpPhyConfigEntries(controller()->device_id(), &i_boost);
const uint8_t i_boost_override = controller()->igd_opregion().GetIBoost(ddi_id(), /*is_dp=*/true);
for (int entry_index = 0; entry_index < static_cast<int>(entries.size()); ++entry_index) {
auto phy_config_entry1 =
registers::DdiPhyConfigEntry1::GetDdiInstance(ddi_id(), entry_index).FromValue(0);
phy_config_entry1.set_reg_value(entries[entry_index].entry1);
if (i_boost_override) {
phy_config_entry1.set_balance_leg_enable(1);
}
phy_config_entry1.WriteTo(mmio_space());
auto phy_config_entry2 =
registers::DdiPhyConfigEntry2::GetDdiInstance(ddi_id(), entry_index).FromValue(0);
phy_config_entry2.set_reg_value(entries[entry_index].entry2).WriteTo(mmio_space());
}
const uint8_t i_boost_val = i_boost_override ? i_boost_override : i_boost;
auto balance_control = registers::DdiPhyBalanceControl::Get().ReadFrom(mmio_space());
balance_control.set_disable_balance_leg(!i_boost && !i_boost_override);
balance_control.balance_leg_select_for_ddi(ddi_id()).set(i_boost_val);
if (ddi_id() == DdiId::DDI_A && dp_lane_count_ == 4) {
balance_control.balance_leg_select_for_ddi(DdiId::DDI_E).set(i_boost_val);
}
balance_control.WriteTo(mmio_space());
// Enable and wait for DDI_BUF_CTL
auto buffer_control = ddi_regs.BufferControl().ReadFrom(mmio_space());
buffer_control.set_enabled(true)
.set_display_port_phy_config_kaby_lake(0)
.set_display_port_lane_count(dp_lane_count_)
.WriteTo(mmio_space());
zx_nanosleep(zx_deadline_after(ZX_USEC(518)));
uint16_t link_rate_reg;
uint8_t link_rate_val;
if (dp_link_rate_table_idx_) {
dpcd::LinkRateSet link_rate_set;
link_rate_set.set_link_rate_idx(static_cast<uint8_t>(dp_link_rate_table_idx_.value()));
link_rate_reg = dpcd::DPCD_LINK_RATE_SET;
link_rate_val = link_rate_set.reg_value();
} else {
uint8_t target_bw;
if (dp_link_rate_mhz_ == 1620) {
target_bw = dpcd::LinkBw::k1620Mbps;
} else if (dp_link_rate_mhz_ == 2700) {
target_bw = dpcd::LinkBw::k2700Mbps;
} else if (dp_link_rate_mhz_ == 5400) {
target_bw = dpcd::LinkBw::k5400Mbps;
} else {
ZX_ASSERT_MSG(dp_link_rate_mhz_ == 8100, "Unrecognized DP link rate: %d Mbps/lane",
dp_link_rate_mhz_);
target_bw = dpcd::LinkBw::k8100Mbps;
}
dpcd::LinkBw bw_setting;
bw_setting.set_link_bw(target_bw);
link_rate_reg = dpcd::DPCD_LINK_BW_SET;
link_rate_val = bw_setting.reg_value();
}
// Configure the bandwidth and lane count settings
dpcd::LaneCount lc_setting;
lc_setting.set_lane_count_set(dp_lane_count_);
lc_setting.set_enhanced_frame_enabled(capabilities_->enhanced_frame_capability());
if (!DpcdWrite(link_rate_reg, &link_rate_val, 1) ||
!DpcdWrite(dpcd::DPCD_COUNT_SET, lc_setting.reg_value_ptr(), 1)) {
zxlogf(ERROR, "DP: Link training: failed to configure settings");
return false;
}
return true;
}
// Number of times to poll with the same voltage level configured, as
// specified by the DisplayPort spec.
static const int kPollsPerVoltageLevel = 5;
bool DpDisplay::LinkTrainingStage1(dpcd::TrainingPatternSet* tp_set, dpcd::TrainingLaneSet* lanes) {
ZX_ASSERT(capabilities_);
// Tell the sink device to look for the training pattern.
tp_set->set_training_pattern_set(tp_set->kTrainingPattern1);
tp_set->set_scrambling_disable(1);
dpcd::AdjustRequestLane adjust_req[dp_lane_count_];
dpcd::LaneStatus lane_status[dp_lane_count_];
int poll_count = 0;
auto delay =
capabilities_->dpcd_reg<dpcd::TrainingAuxRdInterval, dpcd::DPCD_TRAINING_AUX_RD_INTERVAL>();
for (;;) {
if (!DpcdRequestLinkTraining(*tp_set, lanes)) {
return false;
}
zx_nanosleep(
zx_deadline_after(ZX_USEC(delay.clock_recovery_delay_us(capabilities_->dpcd_revision()))));
// Did the sink device receive the signal successfully?
if (!DpcdReadPairedRegs<dpcd::DPCD_LANE0_1_STATUS, dpcd::LaneStatus>(lane_status)) {
return false;
}
bool done = true;
for (unsigned i = 0; i < dp_lane_count_; i++) {
done &= lane_status[i].lane_cr_done(i).get();
}
if (done) {
break;
}
for (unsigned i = 0; i < dp_lane_count_; i++) {
if (lanes[i].max_swing_reached()) {
zxlogf(ERROR, "DP: Link training: max voltage swing reached");
return false;
}
}
if (!DpcdReadPairedRegs<dpcd::DPCD_ADJUST_REQUEST_LANE0_1, dpcd::AdjustRequestLane>(
adjust_req)) {
return false;
}
if (DpcdHandleAdjustRequest(lanes, adjust_req)) {
poll_count = 0;
} else if (++poll_count == kPollsPerVoltageLevel) {
zxlogf(ERROR, "DP: Link training: clock recovery step failed");
return false;
}
}
return true;
}
bool DpDisplay::LinkTrainingStage2(dpcd::TrainingPatternSet* tp_set, dpcd::TrainingLaneSet* lanes) {
ZX_ASSERT(capabilities_);
dpcd::AdjustRequestLane adjust_req[dp_lane_count_];
dpcd::LaneStatus lane_status[dp_lane_count_];
if (is_tgl(controller()->device_id())) {
auto dp_transport_control =
registers::DpTransportControl::GetForTigerLakeTranscoder(pipe()->connected_transcoder_id())
.ReadFrom(mmio_space());
dp_transport_control.set_training_pattern(registers::DpTransportControl::kTrainingPattern2);
dp_transport_control.WriteTo(mmio_space());
} else {
registers::DdiRegs ddi_regs(ddi_id());
auto dp_transport_control = ddi_regs.DpTransportControl().ReadFrom(mmio_space());
dp_transport_control.set_training_pattern(registers::DpTransportControl::kTrainingPattern2);
dp_transport_control.WriteTo(mmio_space());
}
(*tp_set)
.set_training_pattern_set(dpcd::TrainingPatternSet::kTrainingPattern2)
.set_scrambling_disable(1);
int poll_count = 0;
auto delay =
capabilities_->dpcd_reg<dpcd::TrainingAuxRdInterval, dpcd::DPCD_TRAINING_AUX_RD_INTERVAL>();
for (;;) {
// lane0_training and lane1_training can change in the loop
if (!DpcdRequestLinkTraining(*tp_set, lanes)) {
return false;
}
zx_nanosleep(zx_deadline_after(ZX_USEC(delay.channel_eq_delay_us())));
// Did the sink device receive the signal successfully?
if (!DpcdReadPairedRegs<dpcd::DPCD_LANE0_1_STATUS, dpcd::LaneStatus>(lane_status)) {
return false;
}
for (unsigned i = 0; i < dp_lane_count_; i++) {
if (!lane_status[i].lane_cr_done(i).get()) {
zxlogf(ERROR, "DP: Link training: clock recovery regressed");
return false;
}
}
bool symbol_lock_done = true;
bool channel_eq_done = true;
for (unsigned i = 0; i < dp_lane_count_; i++) {
symbol_lock_done &= lane_status[i].lane_symbol_locked(i).get();
channel_eq_done &= lane_status[i].lane_channel_eq_done(i).get();
// TODO(https://fxbug.dev/42060757): The driver should also check interlane align
// done bits.
}
if (symbol_lock_done && channel_eq_done) {
break;
}
// The training attempt has not succeeded yet.
if (++poll_count == kPollsPerVoltageLevel) {
if (!symbol_lock_done) {
zxlogf(ERROR, "DP: Link training: symbol lock failed");
}
if (!channel_eq_done) {
zxlogf(ERROR, "DP: Link training: channel equalization failed");
}
return false;
}
if (!DpcdReadPairedRegs<dpcd::DPCD_ADJUST_REQUEST_LANE0_1, dpcd::AdjustRequestLane>(
adjust_req)) {
return false;
}
DpcdHandleAdjustRequest(lanes, adjust_req);
}
if (is_tgl(controller()->device_id())) {
auto dp_transport_control =
registers::DpTransportControl::GetForTigerLakeTranscoder(pipe()->connected_transcoder_id())
.ReadFrom(mmio_space());
dp_transport_control.set_training_pattern(registers::DpTransportControl::kSendPixelData);
dp_transport_control.WriteTo(mmio_space());
} else {
registers::DdiRegs ddi_regs(ddi_id());
auto dp_transport_control = ddi_regs.DpTransportControl().ReadFrom(mmio_space());
dp_transport_control.set_training_pattern(registers::DpTransportControl::kSendPixelData)
.WriteTo(mmio_space());
dp_transport_control.WriteTo(mmio_space());
}
return true;
}
bool DpDisplay::ProgramDpModeTigerLake() {
ZX_ASSERT(ddi_id() >= DdiId::DDI_TC_1);
ZX_ASSERT(ddi_id() <= DdiId::DDI_TC_6);
auto dp_mode_0 =
registers::DekelDisplayPortMode::GetForLaneDdi(0, ddi_id()).ReadFrom(mmio_space());
auto dp_mode_1 =
registers::DekelDisplayPortMode::GetForLaneDdi(1, ddi_id()).ReadFrom(mmio_space());
auto pin_assignment = registers::DynamicFlexIoDisplayPortPinAssignment::GetForDdi(ddi_id())
.ReadFrom(mmio_space())
.pin_assignment_for_ddi(ddi_id());
if (!pin_assignment.has_value()) {
zxlogf(ERROR, "Cannot get pin assignment for ddi %d", ddi_id());
return false;
}
// Reset DP lane mode.
dp_mode_0.set_x1_mode(0).set_x2_mode(0);
dp_mode_1.set_x1_mode(0).set_x2_mode(0);
switch (*pin_assignment) {
using PinAssignment = registers::DynamicFlexIoDisplayPortPinAssignment::PinAssignment;
case PinAssignment::kNone: // Fixed/Static
if (dp_lane_count_ == 1) {
dp_mode_1.set_x1_mode(1);
} else {
dp_mode_0.set_x2_mode(1);
dp_mode_1.set_x2_mode(1);
}
break;
case PinAssignment::kA:
if (dp_lane_count_ == 4) {
dp_mode_0.set_x2_mode(1);
dp_mode_1.set_x2_mode(1);
}
break;
case PinAssignment::kB:
if (dp_lane_count_ == 2) {
dp_mode_0.set_x2_mode(1);
dp_mode_1.set_x2_mode(1);
}
break;
case PinAssignment::kC:
case PinAssignment::kE:
if (dp_lane_count_ == 1) {
dp_mode_0.set_x1_mode(1);
dp_mode_1.set_x1_mode(1);
} else {
dp_mode_0.set_x2_mode(1);
dp_mode_1.set_x2_mode(1);
}
break;
case PinAssignment::kD:
case PinAssignment::kF:
if (dp_lane_count_ == 1) {
dp_mode_0.set_x1_mode(1);
dp_mode_1.set_x1_mode(1);
} else {
dp_mode_0.set_x2_mode(1);
dp_mode_1.set_x2_mode(1);
}
break;
}
dp_mode_0.WriteTo(mmio_space());
dp_mode_1.WriteTo(mmio_space());
return true;
}
bool DpDisplay::DoLinkTraining() {
// TODO(https://fxbug.dev/42106274): If either of the two training steps fails, we're
// supposed to try with a reduced bit rate.
bool result = true;
if (is_tgl(controller()->device_id())) {
result &= LinkTrainingSetupTigerLake();
} else {
result &= LinkTrainingSetupKabyLake();
}
if (result) {
dpcd::TrainingPatternSet tp_set;
dpcd::TrainingLaneSet lanes[dp_lane_count_];
result &= LinkTrainingStage1(&tp_set, lanes);
result &= LinkTrainingStage2(&tp_set, lanes);
}
// Tell the sink device to end its link training attempt.
//
// If link training was successful, we need to do this so that the sink
// device will accept pixel data from the source device.
//
// If link training was not successful, we want to do this so that
// subsequent link training attempts can work. If we don't unset this
// register, subsequent link training attempts can also fail. (This
// can be important during development. The sink device won't
// necessarily get reset when the computer is reset. This means that a
// bad version of the driver can leave the sink device in a state where
// good versions subsequently don't work.)
uint32_t addr = dpcd::DPCD_TRAINING_PATTERN_SET;
uint8_t reg_byte = 0;
if (!DpcdWrite(addr, &reg_byte, sizeof(reg_byte))) {
zxlogf(ERROR, "Failure setting TRAINING_PATTERN_SET");
return false;
}
return result;
}
namespace {
// Convert ratio x/y into the form used by the Link/Data M/N ratio registers.
void CalculateRatio(int64_t x, int64_t y, uint32_t* m_out, uint32_t* n_out) {
// The exact values of N and M shouldn't matter too much. N and M can be
// up to 24 bits, and larger values will tend to represent the ratio more
// accurately. However, large values of N (e.g. 1 << 23) cause some monitors
// to inexplicably fail. Pick a relatively arbitrary value for N that works
// well in practice.
ZX_DEBUG_ASSERT(x >= 0);
ZX_DEBUG_ASSERT(y > 0);
*n_out = 1 << 20;
*m_out = static_cast<uint32_t>(x * *n_out / y);
}
bool IsEdp(Controller* controller, DdiId ddi_id) {
return controller && controller->igd_opregion().IsEdp(ddi_id);
}
} // namespace
DpDisplay::DpDisplay(Controller* controller, display::DisplayId id, DdiId ddi_id,
DpcdChannel* dp_aux, PchEngine* pch_engine, DdiReference ddi_reference,
inspect::Node* parent_node)
: DisplayDevice(controller, id, ddi_id, std::move(ddi_reference),
IsEdp(controller, ddi_id) ? Type::kEdp : Type::kDp),
dp_aux_(dp_aux),
pch_engine_(type() == Type::kEdp ? pch_engine : nullptr),
i2c_(dp_aux->i2c()) {
ZX_ASSERT(dp_aux);
if (type() == Type::kEdp) {
ZX_ASSERT(pch_engine_ != nullptr);
} else {
ZX_ASSERT(pch_engine_ == nullptr);
}
inspect_node_ = parent_node->CreateChild(fbl::StringPrintf("dp-display-%lu", id.value()));
dp_capabilities_node_ = inspect_node_.CreateChild("dpcd-capabilities");
dp_lane_count_inspect_ = inspect_node_.CreateUint("dp_lane_count", 0);
dp_link_rate_mhz_inspect_ = inspect_node_.CreateUint("dp_link_rate_mhz", 0);
}
DpDisplay::~DpDisplay() = default;
bool DpDisplay::Query() {
// For eDP displays, assume that the BIOS has enabled panel power, given
// that we need to rely on it properly configuring panel power anyway. For
// general DP displays, the default power state is D0, so we don't have to
// worry about AUX failures because of power saving mode.
{
fpromise::result<DpCapabilities> capabilities = DpCapabilities::Read(dp_aux_);
if (capabilities.is_error()) {
return false;
}
capabilities.value().PublishToInspect(&dp_capabilities_node_);
capabilities_ = capabilities.take_value();
}
switch (capabilities_->sink_count()) {
case 0:
zxlogf(ERROR,
"No DisplayPort Sink devices detected on DDI %d. No DisplayDevice will "
"be created.",
ddi_id());
return false;
case 1:
break;
default:
// TODO(https://fxbug.dev/42106274): Add support for MST.
zxlogf(ERROR,
"Multiple (%lu) DisplayPort Sink devices detected on DDI %d. DisplayPort "
"Multi-Stream Transport is not supported yet.",
capabilities_->sink_count(), ddi_id());
return false;
}
uint8_t lane_count = capabilities_->max_lane_count();
if (is_tgl(controller()->device_id())) {
lane_count =
std::min(lane_count, ddi_reference()->GetPhysicalLayerInfo().max_allowed_dp_lane_count);
} else {
// On Kaby Lake and Skylake, DDI E takes over two of DDI A's four lanes. In
// other words, if DDI E is enabled, DDI A only has two lanes available. DDI E
// always has two lanes available.
//
// Kaby Lake: IHD-OS-KBL-Vol 12-1.17 "Display Connections" > "DDIs" page 107
// Skylake: IHD-OS-SKL-Vol 12-05.16 "Display Connections" > "DDIs" page 105
if (ddi_id() == DdiId::DDI_A || ddi_id() == DdiId::DDI_E) {
const bool ddi_e_enabled = !registers::DdiRegs(DdiId::DDI_A)
.BufferControl()
.ReadFrom(mmio_space())
.ddi_e_disabled_kaby_lake();
if (ddi_e_enabled) {
lane_count = std::min<uint8_t>(lane_count, 2);
}
}
}
dp_lane_count_ = lane_count;
dp_lane_count_inspect_.Set(lane_count);
ZX_ASSERT(!dp_link_rate_table_idx_.has_value());
ZX_ASSERT(!capabilities_->supported_link_rates_mbps().empty());
uint8_t last = static_cast<uint8_t>(capabilities_->supported_link_rates_mbps().size() - 1);
zxlogf(INFO, "Found %s monitor (max link rate: %d MHz, lane count: %d)",
(type() == Type::kEdp ? "eDP" : "DP"), capabilities_->supported_link_rates_mbps()[last],
dp_lane_count_);
return true;
}
bool DpDisplay::InitDdi() {
ZX_ASSERT(capabilities_);
if (type() == Type::kEdp) {
if (!EnsureEdpPanelIsPoweredOn()) {
return false;
}
}
if (capabilities_->dpcd_revision() >= dpcd::Revision::k1_1) {
// If the device is in a low power state, the first write can fail. It should be ready
// within 1ms, but try a few extra times to be safe.
dpcd::SetPower set_pwr;
set_pwr.set_set_power_state(set_pwr.kOn);
int count = 0;
while (!DpcdWrite(dpcd::DPCD_SET_POWER, set_pwr.reg_value_ptr(), 1) && ++count < 5) {
zx_nanosleep(zx_deadline_after(ZX_MSEC(1)));
}
if (count >= 5) {
zxlogf(ERROR, "Failed to set dp power state");
return ZX_ERR_INTERNAL;
}
}
// Note that we always initialize the port and train the links regardless of
// the display status.
//
// It is tempting to avoid port initialization and link training if the
// DPCD_INTERLANE_ALIGN_DONE bit of DPCD_LANE_ALIGN_STATUS_UPDATED register
// is set to 1.
//
// One could hope to skip this step when using a connection that has already
// been configured by the boot firmware. However, since we reset DDIs, it is
// not safe to skip training.
// 3.b. Program DFLEXDPMLE.DPMLETC* to maximum number of lanes allowed as determined by
// FIA and panel lane count.
if (is_tgl(controller()->device_id()) && ddi_id() >= DdiId::DDI_TC_1 &&
ddi_id() <= DdiId::DDI_TC_6) {
auto main_link_lane_enabled =
registers::DynamicFlexIoDisplayPortMainLinkLaneEnabled::GetForDdi(ddi_id()).ReadFrom(
mmio_space());
switch (dp_lane_count_) {
case 1:
main_link_lane_enabled.set_enabled_display_port_main_link_lane_bits(ddi_id(), 0b0001);
break;
case 2:
// 1100b cannot be used with Type-C Alt connections.
main_link_lane_enabled.set_enabled_display_port_main_link_lane_bits(ddi_id(), 0b0011);
break;
case 4:
main_link_lane_enabled.set_enabled_display_port_main_link_lane_bits(ddi_id(), 0b1111);
break;
default:
ZX_DEBUG_ASSERT(false);
}
main_link_lane_enabled.WriteTo(mmio_space());
}
// Determine the current link rate if one hasn't been assigned.
if (dp_link_rate_mhz_ == 0) {
ZX_ASSERT(!capabilities_->supported_link_rates_mbps().empty());
// Pick the maximum supported link rate.
uint8_t index = static_cast<uint8_t>(capabilities_->supported_link_rates_mbps().size() - 1);
uint32_t lane_link_rate_mbps = capabilities_->supported_link_rates_mbps()[index];
// When there are 4 lanes, the link training failure rate when using 5.4GHz
// link rate is very high. So we limit the maximum link rate here.
if (dp_lane_count_ == 4) {
lane_link_rate_mbps = std::min(2700u, lane_link_rate_mbps);
}
zxlogf(INFO, "Selected maximum supported DisplayPort link rate: %u Mbps/lane",
lane_link_rate_mbps);
SetLinkRate(lane_link_rate_mbps);
if (capabilities_->use_link_rate_table()) {
dp_link_rate_table_idx_ = index;
}
}
const DdiPllConfig pll_config = DdiPllConfig{
.ddi_clock_khz = static_cast<int32_t>((dp_link_rate_mhz_ * 1'000) / 2),
.spread_spectrum_clocking = false,
.admits_display_port = true,
.admits_hdmi = false,
};
// 4. Enable Port PLL
DisplayPll* dpll =
controller()->dpll_manager()->SetDdiPllConfig(ddi_id(), type() == Type::kEdp, pll_config);
if (dpll == nullptr) {
zxlogf(ERROR, "Cannot find an available DPLL for DP display on DDI %d", ddi_id());
return false;
}
// 5. Enable power for this DDI.
controller()->power()->SetDdiIoPowerState(ddi_id(), /* enable */ true);
if (!PollUntil([&] { return controller()->power()->GetDdiIoPowerState(ddi_id()); }, zx::usec(1),
20)) {
zxlogf(ERROR, "Failed to enable IO power for ddi");
return false;
}
// 6. Program DP mode
// This step only applies to Type-C DDIs in non-Thunderbolt mode.
const auto phy_info = ddi_reference()->GetPhysicalLayerInfo();
if (is_tgl(controller()->device_id()) && phy_info.ddi_type == DdiPhysicalLayer::DdiType::kTypeC &&
phy_info.connection_type != DdiPhysicalLayer::ConnectionType::kTypeCThunderbolt &&
!ProgramDpModeTigerLake()) {
zxlogf(ERROR, "DDI %d: Cannot program DP mode", ddi_id());
return false;
}
// 7. Do link training
if (!DoLinkTraining()) {
zxlogf(ERROR, "DDI %d: DisplayPort link training failed", ddi_id());
return false;
}
return true;
}
bool DpDisplay::InitWithDdiPllConfig(const DdiPllConfig& pll_config) {
if (pll_config.IsEmpty()) {
return false;
}
ZX_DEBUG_ASSERT(pll_config.admits_display_port);
if (!pll_config.admits_display_port) {
zxlogf(ERROR, "DpDisplay::InitWithDdiPllConfig() - incompatible PLL configuration");
return false;
}
Pipe* pipe = controller()->pipe_manager()->RequestPipeFromHardwareState(*this, mmio_space());
if (pipe == nullptr) {
zxlogf(ERROR, "Failed loading pipe from register!");
return false;
}
set_pipe(pipe);
// Some display (e.g. eDP) may have already been configured by the bootloader with a
// link clock. Assign the link rate based on the already enabled DPLL.
if (dp_link_rate_mhz_ == 0) {
int32_t dp_link_rate_mhz = (pll_config.ddi_clock_khz * 2) / 1'000;
// Since the link rate is read from the register directly, we can guarantee
// that it is always valid.
zxlogf(INFO, "Selected pre-configured DisplayPort link rate: %u Mbps/lane", dp_link_rate_mhz);
SetLinkRate(dp_link_rate_mhz);
}
return true;
}
DdiPllConfig DpDisplay::ComputeDdiPllConfig(int32_t pixel_clock_khz) {
return DdiPllConfig{
.ddi_clock_khz = static_cast<int32_t>(static_cast<int32_t>(dp_link_rate_mhz_) * 500),
.spread_spectrum_clocking = false,
.admits_display_port = true,
.admits_hdmi = false,
};
}
bool DpDisplay::DdiModeset(const display::DisplayTiming& mode) { return true; }
bool DpDisplay::PipeConfigPreamble(const display::DisplayTiming& mode, PipeId pipe_id,
TranscoderId transcoder_id) {
registers::TranscoderRegs transcoder_regs(transcoder_id);
// Transcoder should be disabled first before reconfiguring the transcoder
// clock. Will be re-enabled at `PipeConfigEpilogue()`.
auto transcoder_config = transcoder_regs.Config().ReadFrom(mmio_space());
transcoder_config.set_enabled(false).WriteTo(mmio_space());
transcoder_config.ReadFrom(mmio_space());
// Step "Enable Planes, Pipe, and Transcoder" in the "Sequences for
// DisplayPort" > "Enable Sequence" section of Intel's display documentation.
//
// Tiger Lake: IHD-OS-TGL-Vol 12-1.22-Rev2.0 page 144
// Kaby Lake: IHD-OS-KBL-Vol 12-1.17 page 114
// Skylake: IHD-OS-SKL-Vol 12-05.16 page 112
if (is_tgl(controller()->device_id())) {
// On Tiger Lake, the transcoder clock for SST (Single-Stream) mode is set
// during the "Enable and Train DisplayPort" step (done before this method
// is called). This is because Tiger Lake transcoders contain the
// DisplayPort Transport modules used for link training.
auto clock_select = transcoder_regs.ClockSelect().ReadFrom(mmio_space());
const std::optional<DdiId> ddi_clock_source = clock_select.ddi_clock_tiger_lake();
if (!ddi_clock_source.has_value()) {
zxlogf(ERROR, "Transcoder %d clock source not set after DisplayPort training", transcoder_id);
return false;
}
if (*ddi_clock_source != ddi_id()) {
zxlogf(ERROR, "Transcoder %d clock set to DDI %d instead of %d after DisplayPort training.",
transcoder_id, ddi_id(), *ddi_clock_source);
return false;
}
} else {
// On Kaby Lake and Skylake, the transcoder clock input must be set during
// the pipe, plane and transcoder enablement stage.
if (transcoder_id != TranscoderId::TRANSCODER_EDP) {
auto clock_select = transcoder_regs.ClockSelect().ReadFrom(mmio_space());
clock_select.set_ddi_clock_kaby_lake(ddi_id());
clock_select.WriteTo(mmio_space());
}
}
// Pixel clock rate: The rate at which pixels are sent, in pixels per
// second, divided by 1000 (kHz).
const int64_t pixel_clock_rate_khz = mode.pixel_clock_frequency_hz / 1'000;
// This is the rate at which bits are sent on a single DisplayPort
// lane, in raw bits per second, divided by 1000 (kbps).
int64_t link_raw_bit_rate_kbps = dp_link_rate_mhz_ * int64_t{1000};
// Link symbol rate: The rate at which link symbols are sent on a
// single DisplayPort lane, in symbols per second, divided by 1000 (kHz).
//
// A link symbol is 10 raw bits (using 8b/10b encoding, which usually encodes
// an 8-bit data byte).
int64_t link_symbol_rate_khz = link_raw_bit_rate_kbps / 10;
// Configure ratios between pixel clock/bit rate and symbol clock/bit rate
uint32_t link_m;
uint32_t link_n;
CalculateRatio(pixel_clock_rate_khz, link_symbol_rate_khz, &link_m, &link_n);
// Computing the M/N ratios is covered in the "Transcoder" > "Transcoder MN
// Values" section in the PRMs. The current implementation covers the
// straight-forward case - no reduced horizontal blanking, no DSC (Display
// Stream Compression), no FEC (Forward Error Correction).
//
// Tiger Lake: IHD-OS-TGL-Vol 12-1.22-Rev2.0 pages 330-332
// Kaby Lake: IHD-OS-KBL-Vol 12-1.17 pages 174-176
// Skylake: IHD-OS-SKL-Vol 12-05.16 page 171-172
int64_t pixel_bit_rate_kbps = pixel_clock_rate_khz * kBitsPerPixel;
int64_t total_link_bit_rate_kbps = link_symbol_rate_khz * 8 * dp_lane_count_;
ZX_DEBUG_ASSERT(pixel_bit_rate_kbps <=
total_link_bit_rate_kbps); // Should be caught by CheckPixelRate
uint32_t data_m;
uint32_t data_n;
CalculateRatio(pixel_bit_rate_kbps, total_link_bit_rate_kbps, &data_m, &data_n);
auto data_m_reg = transcoder_regs.DataM().FromValue(0);
data_m_reg.set_payload_size(64); // The default TU size is 64.
data_m_reg.set_m(data_m);
data_m_reg.WriteTo(mmio_space());
transcoder_regs.DataN().FromValue(0).set_n(data_n).WriteTo(mmio_space());
transcoder_regs.LinkM().FromValue(0).set_m(link_m).WriteTo(mmio_space());
transcoder_regs.LinkN().FromValue(0).set_n(link_n).WriteTo(mmio_space());
return true;
}
bool DpDisplay::PipeConfigEpilogue(const display::DisplayTiming& mode, PipeId pipe_id,
TranscoderId transcoder_id) {
registers::TranscoderRegs transcoder_regs(transcoder_id);
auto main_stream_attribute_misc = transcoder_regs.MainStreamAttributeMisc().FromValue(0);
main_stream_attribute_misc.set_video_stream_clock_sync_with_link_clock(true)
.set_colorimetry_in_vsc_sdp(false)
.set_colorimetry_top_bit(0);
// TODO(https://fxbug.dev/42166519): Decide the color model / pixel format based on pipe
// configuration and display capabilities.
main_stream_attribute_misc
.set_bits_per_component_select(registers::DisplayPortMsaBitsPerComponent::k8Bpc)
.set_colorimetry_select(registers::DisplayPortMsaColorimetry::kRgbUnspecifiedLegacy)
.WriteTo(mmio_space());
auto transcoder_ddi_control = transcoder_regs.DdiControl().ReadFrom(mmio_space());
transcoder_ddi_control.set_enabled(true);
// The EDP transcoder ignores the DDI select field, because it's always
// connected to DDI A. Since the field is ignored (as opposed to reserved),
// it's still OK to set it. We set it to None, because it seems less misleadng
// than setting it to one of the other DDIs.
const std::optional<DdiId> transcoder_ddi =
(transcoder_id == TranscoderId::TRANSCODER_EDP) ? std::nullopt : std::make_optional(ddi_id());
if (is_tgl(controller()->device_id())) {
ZX_DEBUG_ASSERT_MSG(transcoder_id != TranscoderId::TRANSCODER_EDP,
"The EDP transcoder does not exist on this display engine");
transcoder_ddi_control.set_ddi_tiger_lake(transcoder_ddi);
} else {
ZX_DEBUG_ASSERT_MSG(transcoder_id != TranscoderId::TRANSCODER_EDP || ddi_id() == DdiId::DDI_A,
"The EDP transcoder is attached to DDI A");
transcoder_ddi_control.set_ddi_kaby_lake(transcoder_ddi);
}
// TODO(https://fxbug.dev/42166519): Decide the color model / pixel format based on pipe
// configuration and display capabilities.
transcoder_ddi_control.set_ddi_mode(registers::TranscoderDdiControl::kModeDisplayPortSingleStream)
.set_bits_per_color(registers::TranscoderDdiControl::k8bpc)
.set_vsync_polarity_not_inverted(mode.vsync_polarity == display::SyncPolarity::kPositive)
.set_hsync_polarity_not_inverted(mode.hsync_polarity == display::SyncPolarity::kPositive);
if (!is_tgl(controller()->device_id())) {
// Fields that only exist on Kaby Lake and Skylake.
transcoder_ddi_control.set_is_port_sync_secondary_kaby_lake(false);
}
// The input pipe field is ignored on all transcoders except for EDP (on Kaby
// Lake and Skylake) and DSI (on Tiger Lake, not yet supported by our driver).
// Since the field is ignored (as opposed to reserved), it's OK to still set
// it everywhere.
transcoder_ddi_control.set_input_pipe_id(pipe_id);
transcoder_ddi_control.set_allocate_display_port_virtual_circuit_payload(false)
.set_display_port_lane_count(dp_lane_count_)
.WriteTo(mmio_space());
auto transcoder_config = transcoder_regs.Config().FromValue(0);
transcoder_config.set_enabled_target(true)
.set_interlaced_display(mode.fields_per_frame == display::FieldsPerFrame::kInterlaced)
.WriteTo(mmio_space());
return true;
}
bool DpDisplay::InitBacklightHw() {
if (capabilities_ && capabilities_->backlight_aux_brightness()) {
dpcd::EdpBacklightModeSet mode;
mode.set_brightness_ctrl_mode(mode.kAux);
if (!DpcdWrite(dpcd::DPCD_EDP_BACKLIGHT_MODE_SET, mode.reg_value_ptr(), 1)) {
zxlogf(ERROR, "Failed to init backlight");
return false;
}
}
return true;
}
bool DpDisplay::SetBacklightOn(bool backlight_on) {
if (type() != Type::kEdp) {
return true;
}
if (capabilities_ && capabilities_->backlight_aux_power()) {
dpcd::EdpDisplayCtrl ctrl;
ctrl.set_backlight_enable(backlight_on);
if (!DpcdWrite(dpcd::DPCD_EDP_DISPLAY_CTRL, ctrl.reg_value_ptr(), 1)) {
zxlogf(ERROR, "Failed to enable backlight");
return false;
}
} else {
pch_engine_->SetPanelPowerTarget({
.power_on = true,
.backlight_on = backlight_on,
.force_power_on = false,
.brightness_pwm_counter_on = backlight_on,
});
}
return !backlight_on || SetBacklightBrightness(backlight_brightness_);
}
bool DpDisplay::IsBacklightOn() {
// If there is no embedded display, return false.
if (type() != Type::kEdp) {
return false;
}
if (capabilities_ && capabilities_->backlight_aux_power()) {
dpcd::EdpDisplayCtrl ctrl;
if (!DpcdRead(dpcd::DPCD_EDP_DISPLAY_CTRL, ctrl.reg_value_ptr(), 1)) {
zxlogf(ERROR, "Failed to read backlight");
return false;
}
return ctrl.backlight_enable();
} else {
return pch_engine_->PanelPowerTarget().backlight_on;
}
}
bool DpDisplay::SetBacklightBrightness(double val) {
if (type() != Type::kEdp) {
return true;
}
backlight_brightness_ = std::max(val, controller()->igd_opregion().GetMinBacklightBrightness());
backlight_brightness_ = std::min(backlight_brightness_, 1.0);
if (capabilities_ && capabilities_->backlight_aux_brightness()) {
uint16_t percent = static_cast<uint16_t>(0xffff * backlight_brightness_ + .5);
uint8_t lsb = static_cast<uint8_t>(percent & 0xff);
uint8_t msb = static_cast<uint8_t>(percent >> 8);
if (!DpcdWrite(dpcd::DPCD_EDP_BACKLIGHT_BRIGHTNESS_MSB, &msb, 1) ||
!DpcdWrite(dpcd::DPCD_EDP_BACKLIGHT_BRIGHTNESS_LSB, &lsb, 1)) {
zxlogf(ERROR, "Failed to set backlight brightness");
return false;
}
} else {
pch_engine_->SetPanelBrightness(val);
}
return true;
}
double DpDisplay::GetBacklightBrightness() {
if (!HasBacklight()) {
return 0;
}
double percent = 0;
if (capabilities_ && capabilities_->backlight_aux_brightness()) {
uint8_t lsb;
uint8_t msb;
if (!DpcdRead(dpcd::DPCD_EDP_BACKLIGHT_BRIGHTNESS_MSB, &msb, 1) ||
!DpcdRead(dpcd::DPCD_EDP_BACKLIGHT_BRIGHTNESS_LSB, &lsb, 1)) {
zxlogf(ERROR, "Failed to read backlight brightness");
return 0;
}
uint16_t brightness = static_cast<uint16_t>((lsb & 0xff) | (msb << 8));
percent = (brightness * 1.0f) / 0xffff;
} else {
percent = pch_engine_->PanelBrightness();
}
return percent;
}
bool DpDisplay::HandleHotplug(bool long_pulse) {
if (!long_pulse) {
// On short pulse, query the panel and then proceed as required by panel
dpcd::SinkCount sink_count;
if (!DpcdRead(dpcd::DPCD_SINK_COUNT, sink_count.reg_value_ptr(), 1)) {
zxlogf(WARNING, "Failed to read sink count on hotplug");
return false;
}
// The pulse was from a downstream monitor being connected
// TODO(https://fxbug.dev/42106274): Add support for MST
if (sink_count.count() > 1) {
return true;
}
// The pulse was from a downstream monitor disconnecting
if (sink_count.count() == 0) {
return false;
}
dpcd::LaneAlignStatusUpdate status;
if (!DpcdRead(dpcd::DPCD_LANE_ALIGN_STATUS_UPDATED, status.reg_value_ptr(), 1)) {
zxlogf(WARNING, "Failed to read align status on hotplug");
return false;
}
if (status.interlane_align_done()) {
zxlogf(DEBUG, "HPD event for trained link");
return true;
}
return DoLinkTraining();
}
// Handle long pulse.
//
// On Tiger Lake Type C ports, if the hotplug interrupt has a long pulse,
// it should read DFlex DP Scratch Pad register to find the port live state,
// and connect / disconnect the display accordingly.
//
// Tiger Lake: IHD-OS-TGL-Vol 12-1.22-Rev 2.0, Page 203, "HPD Interrupt
// Sequence"
if (is_tgl(controller()->device_id()) && ddi_id() >= DdiId::DDI_TC_1 &&
ddi_id() <= DdiId::DDI_TC_6) {
auto dp_sp = registers::DynamicFlexIoScratchPad::GetForDdi(ddi_id()).ReadFrom(mmio_space());
auto type_c_live_state = dp_sp.type_c_live_state(ddi_id());
// The device has been already connected when `HandleHotplug` is called.
// If live state is non-zero, keep the existing connection; otherwise
// return false to disconnect the display.
return type_c_live_state !=
registers::DynamicFlexIoScratchPad::TypeCLiveState::kNoHotplugDisplay;
}
// On other platforms, a long pulse indicates that the hotplug status is
// toggled. So we disconnect the existing display.
return false;
}
bool DpDisplay::HasBacklight() { return type() == Type::kEdp; }
zx::result<> DpDisplay::SetBacklightState(bool power, double brightness) {
SetBacklightOn(power);
brightness = std::max(brightness, 0.0);
brightness = std::min(brightness, 1.0);
double range = 1.0f - controller()->igd_opregion().GetMinBacklightBrightness();
if (!SetBacklightBrightness((range * brightness) +
controller()->igd_opregion().GetMinBacklightBrightness())) {
return zx::error(ZX_ERR_IO);
}
return zx::success();
}
zx::result<FidlBacklight::wire::State> DpDisplay::GetBacklightState() {
return zx::success(FidlBacklight::wire::State{
.backlight_on = IsBacklightOn(),
.brightness = GetBacklightBrightness(),
});
}
void DpDisplay::SetLinkRate(uint32_t value) {
dp_link_rate_mhz_ = value;
dp_link_rate_mhz_inspect_.Set(value);
}
bool DpDisplay::CheckPixelRate(int64_t pixel_rate_hz) {
int64_t bit_rate_hz = (dp_link_rate_mhz_ * int64_t{1'000'000}) * dp_lane_count_;
// Multiply by 8/10 because of 8b/10b encoding
int64_t max_pixel_rate_hz = (bit_rate_hz * 8 / 10) / kBitsPerPixel;
return pixel_rate_hz >= 0 && pixel_rate_hz <= max_pixel_rate_hz;
}
int32_t DpDisplay::LoadPixelRateForTranscoderKhz(TranscoderId transcoder_id) {
registers::TranscoderRegs transcoder_regs(transcoder_id);
const uint32_t data_m = transcoder_regs.DataM().ReadFrom(mmio_space()).m();
const uint32_t data_n = transcoder_regs.DataN().ReadFrom(mmio_space()).n();
double dp_link_rate_khz = dp_link_rate_mhz_ * 1000.0;
double total_link_bit_rate_khz = dp_link_rate_khz * (8.0 / 10.0) * dp_lane_count_;
double pixel_clock_rate_khz = (data_m * total_link_bit_rate_khz) / (data_n * kBitsPerPixel);
return static_cast<int32_t>(round(pixel_clock_rate_khz));
}
} // namespace i915