tools/devshell/flash

#!/bin/bash
# Copyright 2018 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

#### CATEGORY=Device management
### flash a connected device
## usage: fx flash [-s <serial>] [--build|--no-build]
##   --build | --no-build    Build (or not) the required dependencies
##   -s                      Serial of device you wish to flash to (only necessary
##                           if multiple devices in fastboot mode)
##  --skip-verify            Skip hardware verification. This is dangerous, please be
##                           sure the images you are flashing match the device. Only
##                           supported with ffx
##  --no-bootloader-reboot   Don't reboot bootloader after flashing firmware or
##                           recovery fastboot image.
##
## Defaults are defined by the "incremental" feature:
##    'fx --enable=incremental flash'  defaults to "--build"
##    'fx --disable=incremental flash'  defaults to "--no-build"

set -e

# shellcheck source=/dev/null
source "$(cd "$(dirname "${BASH_SOURCE[0]}")" >/dev/null 2>&1 && pwd)"/lib/vars.sh || exit $?
# shellcheck source=/dev/null
source "$(cd "$(dirname "${BASH_SOURCE[0]}")" >/dev/null 2>&1 && pwd)"/lib/fx-flash.sh || exit $?
fx-config-read
fx-fail-if-main-pb-is-not-set

usage() {
    fx-command-help
    echo "Available devices:"
    fx-command-run host-tool fastboot devices -l
    exit 1
}

build=false
if is_feature_enabled "incremental"; then
  # In incremental workflows, these defaults have changed.
  # Keep old behavior if incremental is not enabled.
  build=true
fi
serial=
device=$(get-device-name)
skip_verify=false
no_bootloader_reboot=false
while [[ $# -ge 1 ]]; do
  case "$1" in
  -h|--help)
    usage
    ;;
  --no-build)
    build=false
    ;;
  --build)
    build=true
    ;;
  -s)
    shift
    serial="$1"
    ;;
  -device)
    shift
    device="$1"
    ;;
  --skip-verify)
    skip_verify=true
    ;;
  --no-bootloader-reboot)
    no_bootloader_reboot=true
    ;;
  *)
    fx-error "Unknown option $1."
    usage
  esac
  shift
done

get_flash_source_args=()
if [[ "${build}" == "true" ]]; then
  fx-info "Building/refreshing flash artifacts"
  get_flash_source_args+=(--build)
fi
flash_source="$(fx-command-run get-flash-source "${get_flash_source_args[@]}")"

case "${flash_source}" in
  flash-manifest:*)
      flash_manifest="${FUCHSIA_BUILD_DIR}"/"${flash_source#flash-manifest:}"
      product_bundle=
      ;;
  product-bundle:*)
      flash_manifest=
      product_bundle="${FUCHSIA_BUILD_DIR}"/"${flash_source#product-bundle:}"
      ;;
  *)
      fx-error "Unsupported flash source format: ${flash_source}"
      exit 1
esac

if is-remote-workflow-device; then
  fx-error "It is not possible to flash a device over a remote tunnel, as flashing requires a direct USB connection."
  fx-error "Use \`fx flash-remote\` from the local side of the link in these secarios."
  fx-error "A lightweight build on the local side is: \`fx set core.x64 && fx self-build\`"
  echo >&2
  fx-error "If you are not using a remote workflow, run \`fx unset-device\` to remove the remote device configuration."
  exit 1
fi

cd "${FUCHSIA_BUILD_DIR}"
fx-flash "${serial}" "${device}" "${flash_manifest}" "${product_bundle}" "${skip_verify}" "${no_bootloader_reboot}"