| //! Propagates assignment destinations backwards in the CFG to eliminate redundant assignments. |
| //! |
| //! # Motivation |
| //! |
| //! MIR building can insert a lot of redundant copies, and Rust code in general often tends to move |
| //! values around a lot. The result is a lot of assignments of the form `dest = {move} src;` in MIR. |
| //! MIR building for constants in particular tends to create additional locals that are only used |
| //! inside a single block to shuffle a value around unnecessarily. |
| //! |
| //! LLVM by itself is not good enough at eliminating these redundant copies (eg. see |
| //! <https://github.com/rust-lang/rust/issues/32966>), so this leaves some performance on the table |
| //! that we can regain by implementing an optimization for removing these assign statements in rustc |
| //! itself. When this optimization runs fast enough, it can also speed up the constant evaluation |
| //! and code generation phases of rustc due to the reduced number of statements and locals. |
| //! |
| //! # The Optimization |
| //! |
| //! Conceptually, this optimization is "destination propagation". It is similar to the Named Return |
| //! Value Optimization, or NRVO, known from the C++ world, except that it isn't limited to return |
| //! values or the return place `_0`. On a very high level, independent of the actual implementation |
| //! details, it does the following: |
| //! |
| //! 1) Identify `dest = src;` statements with values for `dest` and `src` whose storage can soundly |
| //! be merged. |
| //! 2) Replace all mentions of `src` with `dest` ("unifying" them and propagating the destination |
| //! backwards). |
| //! 3) Delete the `dest = src;` statement (by making it a `nop`). |
| //! |
| //! Step 1) is by far the hardest, so it is explained in more detail below. |
| //! |
| //! ## Soundness |
| //! |
| //! We have a pair of places `p` and `q`, whose memory we would like to merge. In order for this to |
| //! be sound, we need to check a number of conditions: |
| //! |
| //! * `p` and `q` must both be *constant* - it does not make much sense to talk about merging them |
| //! if they do not consistently refer to the same place in memory. This is satisfied if they do |
| //! not contain any indirection through a pointer or any indexing projections. |
| //! |
| //! * `p` and `q` must have the **same type**. If we replace a local with a subtype or supertype, |
| //! we may end up with a different vtable for that local. See the `subtyping-impacts-selection` |
| //! tests for an example where that causes issues. |
| //! |
| //! * We need to make sure that the goal of "merging the memory" is actually structurally possible |
| //! in MIR. For example, even if all the other conditions are satisfied, there is no way to |
| //! "merge" `_5.foo` and `_6.bar`. For now, we ensure this by requiring that both `p` and `q` are |
| //! locals with no further projections. Future iterations of this pass should improve on this. |
| //! |
| //! * Finally, we want `p` and `q` to use the same memory - however, we still need to make sure that |
| //! each of them has enough "ownership" of that memory to continue "doing its job." More |
| //! precisely, what we will check is that whenever the program performs a write to `p`, then it |
| //! does not currently care about what the value in `q` is (and vice versa). We formalize the |
| //! notion of "does not care what the value in `q` is" by checking the *liveness* of `q`. |
| //! |
| //! Because of the difficulty of computing liveness of places that have their address taken, we do |
| //! not even attempt to do it. Any places that are in a local that has its address taken is |
| //! excluded from the optimization. |
| //! |
| //! The first two conditions are simple structural requirements on the `Assign` statements that can |
| //! be trivially checked. The third requirement however is more difficult and costly to check. |
| //! |
| //! ## Future Improvements |
| //! |
| //! There are a number of ways in which this pass could be improved in the future: |
| //! |
| //! * Merging storage liveness ranges instead of removing storage statements completely. This may |
| //! improve stack usage. |
| //! |
| //! * Allow merging locals into places with projections, eg `_5` into `_6.foo`. |
| //! |
| //! * Liveness analysis with more precision than whole locals at a time. The smaller benefit of this |
| //! is that it would allow us to dest prop at "sub-local" levels in some cases. The bigger benefit |
| //! of this is that such liveness analysis can report more accurate results about whole locals at |
| //! a time. For example, consider: |
| //! |
| //! ```ignore (syntax-highlighting-only) |
| //! _1 = u; |
| //! // unrelated code |
| //! _1.f1 = v; |
| //! _2 = _1.f1; |
| //! ``` |
| //! |
| //! Because the current analysis only thinks in terms of locals, it does not have enough |
| //! information to report that `_1` is dead in the "unrelated code" section. |
| //! |
| //! * Liveness analysis enabled by alias analysis. This would allow us to not just bail on locals |
| //! that ever have their address taken. Of course that requires actually having alias analysis |
| //! (and a model to build it on), so this might be a bit of a ways off. |
| //! |
| //! * Various perf improvements. There are a bunch of comments in here marked `PERF` with ideas for |
| //! how to do things more efficiently. However, the complexity of the pass as a whole should be |
| //! kept in mind. |
| //! |
| //! ## Previous Work |
| //! |
| //! A [previous attempt][attempt 1] at implementing an optimization like this turned out to be a |
| //! significant regression in compiler performance. Fixing the regressions introduced a lot of |
| //! undesirable complexity to the implementation. |
| //! |
| //! A [subsequent approach][attempt 2] tried to avoid the costly computation by limiting itself to |
| //! acyclic CFGs, but still turned out to be far too costly to run due to suboptimal performance |
| //! within individual basic blocks, requiring a walk across the entire block for every assignment |
| //! found within the block. For the `tuple-stress` benchmark, which has 458745 statements in a |
| //! single block, this proved to be far too costly. |
| //! |
| //! [Another approach after that][attempt 3] was much closer to correct, but had some soundness |
| //! issues - it was failing to consider stores outside live ranges, and failed to uphold some of the |
| //! requirements that MIR has for non-overlapping places within statements. However, it also had |
| //! performance issues caused by `O(l² * s)` runtime, where `l` is the number of locals and `s` is |
| //! the number of statements and terminators. |
| //! |
| //! Since the first attempt at this, the compiler has improved dramatically, and new analysis |
| //! frameworks have been added that should make this approach viable without requiring a limited |
| //! approach that only works for some classes of CFGs: |
| //! - rustc now has a powerful dataflow analysis framework that can handle forwards and backwards |
| //! analyses efficiently. |
| //! - Layout optimizations for coroutines have been added to improve code generation for |
| //! async/await, which are very similar in spirit to what this optimization does. |
| //! |
| //! Also, rustc now has a simple NRVO pass (see `nrvo.rs`), which handles a subset of the cases that |
| //! this destination propagation pass handles, proving that similar optimizations can be performed |
| //! on MIR. |
| //! |
| //! ## Pre/Post Optimization |
| //! |
| //! It is recommended to run `SimplifyCfg` and then `SimplifyLocals` some time after this pass, as |
| //! it replaces the eliminated assign statements with `nop`s and leaves unused locals behind. |
| //! |
| //! [liveness]: https://en.wikipedia.org/wiki/Live_variable_analysis |
| //! [attempt 1]: https://github.com/rust-lang/rust/pull/47954 |
| //! [attempt 2]: https://github.com/rust-lang/rust/pull/71003 |
| //! [attempt 3]: https://github.com/rust-lang/rust/pull/72632 |
| |
| use rustc_data_structures::fx::{FxIndexMap, IndexEntry, IndexOccupiedEntry}; |
| use rustc_index::bit_set::DenseBitSet; |
| use rustc_index::interval::SparseIntervalMatrix; |
| use rustc_middle::bug; |
| use rustc_middle::mir::visit::{MutVisitor, PlaceContext, Visitor}; |
| use rustc_middle::mir::{ |
| Body, HasLocalDecls, InlineAsmOperand, Local, LocalKind, Location, Operand, PassWhere, Place, |
| Rvalue, Statement, StatementKind, TerminatorKind, dump_mir, traversal, |
| }; |
| use rustc_middle::ty::TyCtxt; |
| use rustc_mir_dataflow::Analysis; |
| use rustc_mir_dataflow::impls::MaybeLiveLocals; |
| use rustc_mir_dataflow::points::{DenseLocationMap, PointIndex, save_as_intervals}; |
| use tracing::{debug, trace}; |
| |
| pub(super) struct DestinationPropagation; |
| |
| impl<'tcx> crate::MirPass<'tcx> for DestinationPropagation { |
| fn is_enabled(&self, sess: &rustc_session::Session) -> bool { |
| // For now, only run at MIR opt level 3. Two things need to be changed before this can be |
| // turned on by default: |
| // 1. Because of the overeager removal of storage statements, this can cause stack space |
| // regressions. This opt is not the place to fix this though, it's a more general |
| // problem in MIR. |
| // 2. Despite being an overall perf improvement, this still causes a 30% regression in |
| // keccak. We can temporarily fix this by bounding function size, but in the long term |
| // we should fix this by being smarter about invalidating analysis results. |
| sess.mir_opt_level() >= 3 |
| } |
| |
| fn run_pass(&self, tcx: TyCtxt<'tcx>, body: &mut Body<'tcx>) { |
| let def_id = body.source.def_id(); |
| let mut candidates = Candidates::default(); |
| let mut write_info = WriteInfo::default(); |
| trace!(func = ?tcx.def_path_str(def_id)); |
| |
| let borrowed = rustc_mir_dataflow::impls::borrowed_locals(body); |
| |
| let live = MaybeLiveLocals.iterate_to_fixpoint(tcx, body, Some("MaybeLiveLocals-DestProp")); |
| let points = DenseLocationMap::new(body); |
| let mut live = save_as_intervals(&points, body, live.analysis, live.results); |
| |
| // In order to avoid having to collect data for every single pair of locals in the body, we |
| // do not allow doing more than one merge for places that are derived from the same local at |
| // once. To avoid missed opportunities, we instead iterate to a fixed point - we'll refer to |
| // each of these iterations as a "round." |
| // |
| // Reaching a fixed point could in theory take up to `min(l, s)` rounds - however, we do not |
| // expect to see MIR like that. To verify this, a test was run against `[rust-lang/regex]` - |
| // the average MIR body saw 1.32 full iterations of this loop. The most that was hit were 30 |
| // for a single function. Only 80/2801 (2.9%) of functions saw at least 5. |
| // |
| // [rust-lang/regex]: |
| // https://github.com/rust-lang/regex/tree/b5372864e2df6a2f5e543a556a62197f50ca3650 |
| let mut round_count = 0; |
| loop { |
| // PERF: Can we do something smarter than recalculating the candidates and liveness |
| // results? |
| candidates.reset_and_find(body, &borrowed); |
| trace!(?candidates); |
| dest_prop_mir_dump(tcx, body, &points, &live, round_count); |
| |
| FilterInformation::filter_liveness( |
| &mut candidates, |
| &points, |
| &live, |
| &mut write_info, |
| body, |
| ); |
| |
| // Because we only filter once per round, it is unsound to use a local for more than |
| // one merge operation within a single round of optimizations. We store here which ones |
| // we have already used. |
| let mut merged_locals: DenseBitSet<Local> = |
| DenseBitSet::new_empty(body.local_decls.len()); |
| |
| // This is the set of merges we will apply this round. It is a subset of the candidates. |
| let mut merges = FxIndexMap::default(); |
| |
| for (src, candidates) in candidates.c.iter() { |
| if merged_locals.contains(*src) { |
| continue; |
| } |
| let Some(dest) = candidates.iter().find(|dest| !merged_locals.contains(**dest)) |
| else { |
| continue; |
| }; |
| |
| // Replace `src` by `dest` everywhere. |
| merges.insert(*src, *dest); |
| merged_locals.insert(*src); |
| merged_locals.insert(*dest); |
| |
| // Update liveness information based on the merge we just performed. |
| // Every location where `src` was live, `dest` will be live. |
| live.union_rows(*src, *dest); |
| } |
| trace!(merging = ?merges); |
| |
| if merges.is_empty() { |
| break; |
| } |
| round_count += 1; |
| |
| apply_merges(body, tcx, merges, merged_locals); |
| } |
| |
| trace!(round_count); |
| } |
| |
| fn is_required(&self) -> bool { |
| false |
| } |
| } |
| |
| #[derive(Debug, Default)] |
| struct Candidates { |
| /// The set of candidates we are considering in this optimization. |
| /// |
| /// We will always merge the key into at most one of its values. |
| /// |
| /// Whether a place ends up in the key or the value does not correspond to whether it appears as |
| /// the lhs or rhs of any assignment. As a matter of fact, the places in here might never appear |
| /// in an assignment at all. This happens because if we see an assignment like this: |
| /// |
| /// ```ignore (syntax-highlighting-only) |
| /// _1.0 = _2.0 |
| /// ``` |
| /// |
| /// We will still report that we would like to merge `_1` and `_2` in an attempt to allow us to |
| /// remove that assignment. |
| c: FxIndexMap<Local, Vec<Local>>, |
| |
| /// A reverse index of the `c` set; if the `c` set contains `a => Place { local: b, proj }`, |
| /// then this contains `b => a`. |
| // PERF: Possibly these should be `SmallVec`s? |
| reverse: FxIndexMap<Local, Vec<Local>>, |
| } |
| |
| ////////////////////////////////////////////////////////// |
| // Merging |
| // |
| // Applies the actual optimization |
| |
| fn apply_merges<'tcx>( |
| body: &mut Body<'tcx>, |
| tcx: TyCtxt<'tcx>, |
| merges: FxIndexMap<Local, Local>, |
| merged_locals: DenseBitSet<Local>, |
| ) { |
| let mut merger = Merger { tcx, merges, merged_locals }; |
| merger.visit_body_preserves_cfg(body); |
| } |
| |
| struct Merger<'tcx> { |
| tcx: TyCtxt<'tcx>, |
| merges: FxIndexMap<Local, Local>, |
| merged_locals: DenseBitSet<Local>, |
| } |
| |
| impl<'tcx> MutVisitor<'tcx> for Merger<'tcx> { |
| fn tcx(&self) -> TyCtxt<'tcx> { |
| self.tcx |
| } |
| |
| fn visit_local(&mut self, local: &mut Local, _: PlaceContext, _location: Location) { |
| if let Some(dest) = self.merges.get(local) { |
| *local = *dest; |
| } |
| } |
| |
| fn visit_statement(&mut self, statement: &mut Statement<'tcx>, location: Location) { |
| match &statement.kind { |
| // FIXME: Don't delete storage statements, but "merge" the storage ranges instead. |
| StatementKind::StorageDead(local) | StatementKind::StorageLive(local) |
| if self.merged_locals.contains(*local) => |
| { |
| statement.make_nop(); |
| return; |
| } |
| _ => (), |
| }; |
| self.super_statement(statement, location); |
| match &statement.kind { |
| StatementKind::Assign(box (dest, rvalue)) => { |
| match rvalue { |
| Rvalue::CopyForDeref(place) |
| | Rvalue::Use(Operand::Copy(place) | Operand::Move(place)) => { |
| // These might've been turned into self-assignments by the replacement |
| // (this includes the original statement we wanted to eliminate). |
| if dest == place { |
| debug!("{:?} turned into self-assignment, deleting", location); |
| statement.make_nop(); |
| } |
| } |
| _ => {} |
| } |
| } |
| |
| _ => {} |
| } |
| } |
| } |
| |
| ////////////////////////////////////////////////////////// |
| // Liveness filtering |
| // |
| // This section enforces bullet point 2 |
| |
| struct FilterInformation<'a, 'tcx> { |
| body: &'a Body<'tcx>, |
| points: &'a DenseLocationMap, |
| live: &'a SparseIntervalMatrix<Local, PointIndex>, |
| candidates: &'a mut Candidates, |
| write_info: &'a mut WriteInfo, |
| at: Location, |
| } |
| |
| // We first implement some utility functions which we will expose removing candidates according to |
| // different needs. Throughout the liveness filtering, the `candidates` are only ever accessed |
| // through these methods, and not directly. |
| impl Candidates { |
| /// Collects the candidates for merging. |
| /// |
| /// This is responsible for enforcing the first and third bullet point. |
| fn reset_and_find<'tcx>(&mut self, body: &Body<'tcx>, borrowed: &DenseBitSet<Local>) { |
| self.c.clear(); |
| self.reverse.clear(); |
| let mut visitor = FindAssignments { body, candidates: &mut self.c, borrowed }; |
| visitor.visit_body(body); |
| // Deduplicate candidates. |
| for (_, cands) in self.c.iter_mut() { |
| cands.sort(); |
| cands.dedup(); |
| } |
| // Generate the reverse map. |
| for (src, cands) in self.c.iter() { |
| for dest in cands.iter().copied() { |
| self.reverse.entry(dest).or_default().push(*src); |
| } |
| } |
| } |
| |
| /// Just `Vec::retain`, but the condition is inverted and we add debugging output |
| fn vec_filter_candidates( |
| src: Local, |
| v: &mut Vec<Local>, |
| mut f: impl FnMut(Local) -> CandidateFilter, |
| at: Location, |
| ) { |
| v.retain(|dest| { |
| let remove = f(*dest); |
| if remove == CandidateFilter::Remove { |
| trace!("eliminating {:?} => {:?} due to conflict at {:?}", src, dest, at); |
| } |
| remove == CandidateFilter::Keep |
| }); |
| } |
| |
| /// `vec_filter_candidates` but for an `Entry` |
| fn entry_filter_candidates( |
| mut entry: IndexOccupiedEntry<'_, Local, Vec<Local>>, |
| p: Local, |
| f: impl FnMut(Local) -> CandidateFilter, |
| at: Location, |
| ) { |
| let candidates = entry.get_mut(); |
| Self::vec_filter_candidates(p, candidates, f, at); |
| if candidates.len() == 0 { |
| // FIXME(#120456) - is `swap_remove` correct? |
| entry.swap_remove(); |
| } |
| } |
| |
| /// For all candidates `(p, q)` or `(q, p)` removes the candidate if `f(q)` says to do so |
| fn filter_candidates_by( |
| &mut self, |
| p: Local, |
| mut f: impl FnMut(Local) -> CandidateFilter, |
| at: Location, |
| ) { |
| // Cover the cases where `p` appears as a `src` |
| if let IndexEntry::Occupied(entry) = self.c.entry(p) { |
| Self::entry_filter_candidates(entry, p, &mut f, at); |
| } |
| // And the cases where `p` appears as a `dest` |
| let Some(srcs) = self.reverse.get_mut(&p) else { |
| return; |
| }; |
| // We use `retain` here to remove the elements from the reverse set if we've removed the |
| // matching candidate in the forward set. |
| srcs.retain(|src| { |
| if f(*src) == CandidateFilter::Keep { |
| return true; |
| } |
| let IndexEntry::Occupied(entry) = self.c.entry(*src) else { |
| return false; |
| }; |
| Self::entry_filter_candidates( |
| entry, |
| *src, |
| |dest| { |
| if dest == p { CandidateFilter::Remove } else { CandidateFilter::Keep } |
| }, |
| at, |
| ); |
| false |
| }); |
| } |
| } |
| |
| #[derive(Copy, Clone, PartialEq, Eq)] |
| enum CandidateFilter { |
| Keep, |
| Remove, |
| } |
| |
| impl<'a, 'tcx> FilterInformation<'a, 'tcx> { |
| /// Filters the set of candidates to remove those that conflict. |
| /// |
| /// The steps we take are exactly those that are outlined at the top of the file. For each |
| /// statement/terminator, we collect the set of locals that are written to in that |
| /// statement/terminator, and then we remove all pairs of candidates that contain one such local |
| /// and another one that is live. |
| /// |
| /// We need to be careful about the ordering of operations within each statement/terminator |
| /// here. Many statements might write and read from more than one place, and we need to consider |
| /// them all. The strategy for doing this is as follows: We first gather all the places that are |
| /// written to within the statement/terminator via `WriteInfo`. Then, we use the liveness |
| /// analysis from *before* the statement/terminator (in the control flow sense) to eliminate |
| /// candidates - this is because we want to conservatively treat a pair of locals that is both |
| /// read and written in the statement/terminator to be conflicting, and the liveness analysis |
| /// before the statement/terminator will correctly report locals that are read in the |
| /// statement/terminator to be live. We are additionally conservative by treating all written to |
| /// locals as also being read from. |
| fn filter_liveness( |
| candidates: &mut Candidates, |
| points: &DenseLocationMap, |
| live: &SparseIntervalMatrix<Local, PointIndex>, |
| write_info: &mut WriteInfo, |
| body: &Body<'tcx>, |
| ) { |
| let mut this = FilterInformation { |
| body, |
| points, |
| live, |
| candidates, |
| // We don't actually store anything at this scope, we just keep things here to be able |
| // to reuse the allocation. |
| write_info, |
| // Doesn't matter what we put here, will be overwritten before being used |
| at: Location::START, |
| }; |
| this.internal_filter_liveness(); |
| } |
| |
| fn internal_filter_liveness(&mut self) { |
| for (block, data) in traversal::preorder(self.body) { |
| self.at = Location { block, statement_index: data.statements.len() }; |
| self.write_info.for_terminator(&data.terminator().kind); |
| self.apply_conflicts(); |
| |
| for (i, statement) in data.statements.iter().enumerate().rev() { |
| self.at = Location { block, statement_index: i }; |
| self.write_info.for_statement(&statement.kind, self.body); |
| self.apply_conflicts(); |
| } |
| } |
| } |
| |
| fn apply_conflicts(&mut self) { |
| let writes = &self.write_info.writes; |
| for p in writes { |
| let other_skip = self.write_info.skip_pair.and_then(|(a, b)| { |
| if a == *p { |
| Some(b) |
| } else if b == *p { |
| Some(a) |
| } else { |
| None |
| } |
| }); |
| let at = self.points.point_from_location(self.at); |
| self.candidates.filter_candidates_by( |
| *p, |
| |q| { |
| if Some(q) == other_skip { |
| return CandidateFilter::Keep; |
| } |
| // It is possible that a local may be live for less than the |
| // duration of a statement This happens in the case of function |
| // calls or inline asm. Because of this, we also mark locals as |
| // conflicting when both of them are written to in the same |
| // statement. |
| if self.live.contains(q, at) || writes.contains(&q) { |
| CandidateFilter::Remove |
| } else { |
| CandidateFilter::Keep |
| } |
| }, |
| self.at, |
| ); |
| } |
| } |
| } |
| |
| /// Describes where a statement/terminator writes to |
| #[derive(Default, Debug)] |
| struct WriteInfo { |
| writes: Vec<Local>, |
| /// If this pair of locals is a candidate pair, completely skip processing it during this |
| /// statement. All other candidates are unaffected. |
| skip_pair: Option<(Local, Local)>, |
| } |
| |
| impl WriteInfo { |
| fn for_statement<'tcx>(&mut self, statement: &StatementKind<'tcx>, body: &Body<'tcx>) { |
| self.reset(); |
| match statement { |
| StatementKind::Assign(box (lhs, rhs)) => { |
| self.add_place(*lhs); |
| match rhs { |
| Rvalue::Use(op) => { |
| self.add_operand(op); |
| self.consider_skipping_for_assign_use(*lhs, op, body); |
| } |
| Rvalue::Repeat(op, _) => { |
| self.add_operand(op); |
| } |
| Rvalue::Cast(_, op, _) |
| | Rvalue::UnaryOp(_, op) |
| | Rvalue::ShallowInitBox(op, _) => { |
| self.add_operand(op); |
| } |
| Rvalue::BinaryOp(_, ops) => { |
| for op in [&ops.0, &ops.1] { |
| self.add_operand(op); |
| } |
| } |
| Rvalue::Aggregate(_, ops) => { |
| for op in ops { |
| self.add_operand(op); |
| } |
| } |
| Rvalue::WrapUnsafeBinder(op, _) => { |
| self.add_operand(op); |
| } |
| Rvalue::ThreadLocalRef(_) |
| | Rvalue::NullaryOp(_, _) |
| | Rvalue::Ref(_, _, _) |
| | Rvalue::RawPtr(_, _) |
| | Rvalue::Len(_) |
| | Rvalue::Discriminant(_) |
| | Rvalue::CopyForDeref(_) => {} |
| } |
| } |
| // Retags are technically also reads, but reporting them as a write suffices |
| StatementKind::SetDiscriminant { place, .. } |
| | StatementKind::Deinit(place) |
| | StatementKind::Retag(_, place) => { |
| self.add_place(**place); |
| } |
| StatementKind::Intrinsic(_) |
| | StatementKind::ConstEvalCounter |
| | StatementKind::Nop |
| | StatementKind::Coverage(_) |
| | StatementKind::StorageLive(_) |
| | StatementKind::StorageDead(_) |
| | StatementKind::BackwardIncompatibleDropHint { .. } |
| | StatementKind::PlaceMention(_) => {} |
| StatementKind::FakeRead(_) | StatementKind::AscribeUserType(_, _) => { |
| bug!("{:?} not found in this MIR phase", statement) |
| } |
| } |
| } |
| |
| fn consider_skipping_for_assign_use<'tcx>( |
| &mut self, |
| lhs: Place<'tcx>, |
| rhs: &Operand<'tcx>, |
| body: &Body<'tcx>, |
| ) { |
| let Some(rhs) = rhs.place() else { return }; |
| if let Some(pair) = places_to_candidate_pair(lhs, rhs, body) { |
| self.skip_pair = Some(pair); |
| } |
| } |
| |
| fn for_terminator<'tcx>(&mut self, terminator: &TerminatorKind<'tcx>) { |
| self.reset(); |
| match terminator { |
| TerminatorKind::SwitchInt { discr: op, .. } |
| | TerminatorKind::Assert { cond: op, .. } => { |
| self.add_operand(op); |
| } |
| TerminatorKind::Call { destination, func, args, .. } => { |
| self.add_place(*destination); |
| self.add_operand(func); |
| for arg in args { |
| self.add_operand(&arg.node); |
| } |
| } |
| TerminatorKind::TailCall { func, args, .. } => { |
| self.add_operand(func); |
| for arg in args { |
| self.add_operand(&arg.node); |
| } |
| } |
| TerminatorKind::InlineAsm { operands, .. } => { |
| for asm_operand in operands { |
| match asm_operand { |
| InlineAsmOperand::In { value, .. } => { |
| self.add_operand(value); |
| } |
| InlineAsmOperand::Out { place, .. } => { |
| if let Some(place) = place { |
| self.add_place(*place); |
| } |
| } |
| // Note that the `late` field in `InOut` is about whether the registers used |
| // for these things overlap, and is of absolutely no interest to us. |
| InlineAsmOperand::InOut { in_value, out_place, .. } => { |
| if let Some(place) = out_place { |
| self.add_place(*place); |
| } |
| self.add_operand(in_value); |
| } |
| InlineAsmOperand::Const { .. } |
| | InlineAsmOperand::SymFn { .. } |
| | InlineAsmOperand::SymStatic { .. } |
| | InlineAsmOperand::Label { .. } => {} |
| } |
| } |
| } |
| TerminatorKind::Goto { .. } |
| | TerminatorKind::UnwindResume |
| | TerminatorKind::UnwindTerminate(_) |
| | TerminatorKind::Return |
| | TerminatorKind::Unreachable { .. } => (), |
| TerminatorKind::Drop { .. } => { |
| // `Drop`s create a `&mut` and so are not considered |
| } |
| TerminatorKind::Yield { .. } |
| | TerminatorKind::CoroutineDrop |
| | TerminatorKind::FalseEdge { .. } |
| | TerminatorKind::FalseUnwind { .. } => { |
| bug!("{:?} not found in this MIR phase", terminator) |
| } |
| } |
| } |
| |
| fn add_place(&mut self, place: Place<'_>) { |
| self.writes.push(place.local); |
| } |
| |
| fn add_operand<'tcx>(&mut self, op: &Operand<'tcx>) { |
| match op { |
| // FIXME(JakobDegen): In a previous version, the `Move` case was incorrectly treated as |
| // being a read only. This was unsound, however we cannot add a regression test because |
| // it is not possible to set this off with current MIR. Once we have that ability, a |
| // regression test should be added. |
| Operand::Move(p) => self.add_place(*p), |
| Operand::Copy(_) | Operand::Constant(_) => (), |
| } |
| } |
| |
| fn reset(&mut self) { |
| self.writes.clear(); |
| self.skip_pair = None; |
| } |
| } |
| |
| ///////////////////////////////////////////////////// |
| // Candidate accumulation |
| |
| /// If the pair of places is being considered for merging, returns the candidate which would be |
| /// merged in order to accomplish this. |
| /// |
| /// The contract here is in one direction - there is a guarantee that merging the locals that are |
| /// outputted by this function would result in an assignment between the inputs becoming a |
| /// self-assignment. However, there is no guarantee that the returned pair is actually suitable for |
| /// merging - candidate collection must still check this independently. |
| /// |
| /// This output is unique for each unordered pair of input places. |
| fn places_to_candidate_pair<'tcx>( |
| a: Place<'tcx>, |
| b: Place<'tcx>, |
| body: &Body<'tcx>, |
| ) -> Option<(Local, Local)> { |
| let (mut a, mut b) = if a.projection.len() == 0 && b.projection.len() == 0 { |
| (a.local, b.local) |
| } else { |
| return None; |
| }; |
| |
| // By sorting, we make sure we're input order independent |
| if a > b { |
| std::mem::swap(&mut a, &mut b); |
| } |
| |
| // We could now return `(a, b)`, but then we miss some candidates in the case where `a` can't be |
| // used as a `src`. |
| if is_local_required(a, body) { |
| std::mem::swap(&mut a, &mut b); |
| } |
| // We could check `is_local_required` again here, but there's no need - after all, we make no |
| // promise that the candidate pair is actually valid |
| Some((a, b)) |
| } |
| |
| struct FindAssignments<'a, 'tcx> { |
| body: &'a Body<'tcx>, |
| candidates: &'a mut FxIndexMap<Local, Vec<Local>>, |
| borrowed: &'a DenseBitSet<Local>, |
| } |
| |
| impl<'tcx> Visitor<'tcx> for FindAssignments<'_, 'tcx> { |
| fn visit_statement(&mut self, statement: &Statement<'tcx>, _: Location) { |
| if let StatementKind::Assign(box ( |
| lhs, |
| Rvalue::CopyForDeref(rhs) | Rvalue::Use(Operand::Copy(rhs) | Operand::Move(rhs)), |
| )) = &statement.kind |
| { |
| let Some((src, dest)) = places_to_candidate_pair(*lhs, *rhs, self.body) else { |
| return; |
| }; |
| |
| // As described at the top of the file, we do not go near things that have |
| // their address taken. |
| if self.borrowed.contains(src) || self.borrowed.contains(dest) { |
| return; |
| } |
| |
| // As described at the top of this file, we do not touch locals which have |
| // different types. |
| let src_ty = self.body.local_decls()[src].ty; |
| let dest_ty = self.body.local_decls()[dest].ty; |
| if src_ty != dest_ty { |
| // FIXME(#112651): This can be removed afterwards. Also update the module description. |
| trace!("skipped `{src:?} = {dest:?}` due to subtyping: {src_ty} != {dest_ty}"); |
| return; |
| } |
| |
| // Also, we need to make sure that MIR actually allows the `src` to be removed |
| if is_local_required(src, self.body) { |
| return; |
| } |
| |
| // We may insert duplicates here, but that's fine |
| self.candidates.entry(src).or_default().push(dest); |
| } |
| } |
| } |
| |
| /// Some locals are part of the function's interface and can not be removed. |
| /// |
| /// Note that these locals *can* still be merged with non-required locals by removing that other |
| /// local. |
| fn is_local_required(local: Local, body: &Body<'_>) -> bool { |
| match body.local_kind(local) { |
| LocalKind::Arg | LocalKind::ReturnPointer => true, |
| LocalKind::Temp => false, |
| } |
| } |
| |
| ///////////////////////////////////////////////////////// |
| // MIR Dump |
| |
| fn dest_prop_mir_dump<'tcx>( |
| tcx: TyCtxt<'tcx>, |
| body: &Body<'tcx>, |
| points: &DenseLocationMap, |
| live: &SparseIntervalMatrix<Local, PointIndex>, |
| round: usize, |
| ) { |
| let locals_live_at = |location| { |
| let location = points.point_from_location(location); |
| live.rows().filter(|&r| live.contains(r, location)).collect::<Vec<_>>() |
| }; |
| dump_mir(tcx, false, "DestinationPropagation-dataflow", &round, body, |pass_where, w| { |
| if let PassWhere::BeforeLocation(loc) = pass_where { |
| writeln!(w, " // live: {:?}", locals_live_at(loc))?; |
| } |
| |
| Ok(()) |
| }); |
| } |
