| macro_rules! int_impl { |
| ($SelfT:ty, $ActualT:ident, $UnsignedT:ty, $BITS:expr, $Min:expr, $Max:expr, $Feature:expr, |
| $EndFeature:expr, $rot:expr, $rot_op:expr, $rot_result:expr, $swap_op:expr, $swapped:expr, |
| $reversed:expr, $le_bytes:expr, $be_bytes:expr, |
| $to_xe_bytes_doc:expr, $from_xe_bytes_doc:expr) => { |
| doc_comment! { |
| concat!("The smallest value that can be represented by this integer type. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(", stringify!($SelfT), "::MIN, ", stringify!($Min), ");", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "assoc_int_consts", since = "1.43.0")] |
| pub const MIN: Self = !0 ^ ((!0 as $UnsignedT) >> 1) as Self; |
| } |
| |
| doc_comment! { |
| concat!("The largest value that can be represented by this integer type. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(", stringify!($SelfT), "::MAX, ", stringify!($Max), ");", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "assoc_int_consts", since = "1.43.0")] |
| pub const MAX: Self = !Self::MIN; |
| } |
| |
| doc_comment! { |
| concat!("The size of this integer type in bits. |
| |
| # Examples |
| |
| ``` |
| ", $Feature, "#![feature(int_bits_const)] |
| assert_eq!(", stringify!($SelfT), "::BITS, ", stringify!($BITS), ");", |
| $EndFeature, " |
| ```"), |
| #[unstable(feature = "int_bits_const", issue = "76904")] |
| pub const BITS: u32 = $BITS; |
| } |
| |
| doc_comment! { |
| concat!("Converts a string slice in a given base to an integer. |
| |
| The string is expected to be an optional `+` or `-` sign followed by digits. |
| Leading and trailing whitespace represent an error. Digits are a subset of these characters, |
| depending on `radix`: |
| |
| * `0-9` |
| * `a-z` |
| * `A-Z` |
| |
| # Panics |
| |
| This function panics if `radix` is not in the range from 2 to 36. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(", stringify!($SelfT), "::from_str_radix(\"A\", 16), Ok(10));", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| pub fn from_str_radix(src: &str, radix: u32) -> Result<Self, ParseIntError> { |
| from_str_radix(src, radix) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns the number of ones in the binary representation of `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = 0b100_0000", stringify!($SelfT), "; |
| |
| assert_eq!(n.count_ones(), 1);", |
| $EndFeature, " |
| ``` |
| "), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn count_ones(self) -> u32 { (self as $UnsignedT).count_ones() } |
| } |
| |
| doc_comment! { |
| concat!("Returns the number of zeros in the binary representation of `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(", stringify!($SelfT), "::MAX.count_zeros(), 1);", $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn count_zeros(self) -> u32 { |
| (!self).count_ones() |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns the number of leading zeros in the binary representation of `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = -1", stringify!($SelfT), "; |
| |
| assert_eq!(n.leading_zeros(), 0);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn leading_zeros(self) -> u32 { |
| (self as $UnsignedT).leading_zeros() |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns the number of trailing zeros in the binary representation of `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = -4", stringify!($SelfT), "; |
| |
| assert_eq!(n.trailing_zeros(), 2);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn trailing_zeros(self) -> u32 { |
| (self as $UnsignedT).trailing_zeros() |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns the number of leading ones in the binary representation of `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = -1", stringify!($SelfT), "; |
| |
| assert_eq!(n.leading_ones(), ", stringify!($BITS), ");", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "leading_trailing_ones", since = "1.46.0")] |
| #[rustc_const_stable(feature = "leading_trailing_ones", since = "1.46.0")] |
| #[inline] |
| pub const fn leading_ones(self) -> u32 { |
| (self as $UnsignedT).leading_ones() |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns the number of trailing ones in the binary representation of `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = 3", stringify!($SelfT), "; |
| |
| assert_eq!(n.trailing_ones(), 2);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "leading_trailing_ones", since = "1.46.0")] |
| #[rustc_const_stable(feature = "leading_trailing_ones", since = "1.46.0")] |
| #[inline] |
| pub const fn trailing_ones(self) -> u32 { |
| (self as $UnsignedT).trailing_ones() |
| } |
| } |
| |
| doc_comment! { |
| concat!("Shifts the bits to the left by a specified amount, `n`, |
| wrapping the truncated bits to the end of the resulting integer. |
| |
| Please note this isn't the same operation as the `<<` shifting operator! |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| let n = ", $rot_op, stringify!($SelfT), "; |
| let m = ", $rot_result, "; |
| |
| assert_eq!(n.rotate_left(", $rot, "), m); |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn rotate_left(self, n: u32) -> Self { |
| (self as $UnsignedT).rotate_left(n) as Self |
| } |
| } |
| |
| doc_comment! { |
| concat!("Shifts the bits to the right by a specified amount, `n`, |
| wrapping the truncated bits to the beginning of the resulting |
| integer. |
| |
| Please note this isn't the same operation as the `>>` shifting operator! |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| let n = ", $rot_result, stringify!($SelfT), "; |
| let m = ", $rot_op, "; |
| |
| assert_eq!(n.rotate_right(", $rot, "), m); |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn rotate_right(self, n: u32) -> Self { |
| (self as $UnsignedT).rotate_right(n) as Self |
| } |
| } |
| |
| doc_comment! { |
| concat!("Reverses the byte order of the integer. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| let n = ", $swap_op, stringify!($SelfT), "; |
| |
| let m = n.swap_bytes(); |
| |
| assert_eq!(m, ", $swapped, "); |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn swap_bytes(self) -> Self { |
| (self as $UnsignedT).swap_bytes() as Self |
| } |
| } |
| |
| doc_comment! { |
| concat!("Reverses the bit pattern of the integer. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| let n = ", $swap_op, stringify!($SelfT), "; |
| let m = n.reverse_bits(); |
| |
| assert_eq!(m, ", $reversed, "); |
| ```"), |
| #[stable(feature = "reverse_bits", since = "1.37.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| #[must_use] |
| pub const fn reverse_bits(self) -> Self { |
| (self as $UnsignedT).reverse_bits() as Self |
| } |
| } |
| |
| doc_comment! { |
| concat!("Converts an integer from big endian to the target's endianness. |
| |
| On big endian this is a no-op. On little endian the bytes are swapped. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = 0x1A", stringify!($SelfT), "; |
| |
| if cfg!(target_endian = \"big\") { |
| assert_eq!(", stringify!($SelfT), "::from_be(n), n) |
| } else { |
| assert_eq!(", stringify!($SelfT), "::from_be(n), n.swap_bytes()) |
| }", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_conversions", since = "1.32.0")] |
| #[inline] |
| pub const fn from_be(x: Self) -> Self { |
| #[cfg(target_endian = "big")] |
| { |
| x |
| } |
| #[cfg(not(target_endian = "big"))] |
| { |
| x.swap_bytes() |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Converts an integer from little endian to the target's endianness. |
| |
| On little endian this is a no-op. On big endian the bytes are swapped. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = 0x1A", stringify!($SelfT), "; |
| |
| if cfg!(target_endian = \"little\") { |
| assert_eq!(", stringify!($SelfT), "::from_le(n), n) |
| } else { |
| assert_eq!(", stringify!($SelfT), "::from_le(n), n.swap_bytes()) |
| }", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_conversions", since = "1.32.0")] |
| #[inline] |
| pub const fn from_le(x: Self) -> Self { |
| #[cfg(target_endian = "little")] |
| { |
| x |
| } |
| #[cfg(not(target_endian = "little"))] |
| { |
| x.swap_bytes() |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Converts `self` to big endian from the target's endianness. |
| |
| On big endian this is a no-op. On little endian the bytes are swapped. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = 0x1A", stringify!($SelfT), "; |
| |
| if cfg!(target_endian = \"big\") { |
| assert_eq!(n.to_be(), n) |
| } else { |
| assert_eq!(n.to_be(), n.swap_bytes()) |
| }", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_conversions", since = "1.32.0")] |
| #[inline] |
| pub const fn to_be(self) -> Self { // or not to be? |
| #[cfg(target_endian = "big")] |
| { |
| self |
| } |
| #[cfg(not(target_endian = "big"))] |
| { |
| self.swap_bytes() |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Converts `self` to little endian from the target's endianness. |
| |
| On little endian this is a no-op. On big endian the bytes are swapped. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let n = 0x1A", stringify!($SelfT), "; |
| |
| if cfg!(target_endian = \"little\") { |
| assert_eq!(n.to_le(), n) |
| } else { |
| assert_eq!(n.to_le(), n.swap_bytes()) |
| }", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_conversions", since = "1.32.0")] |
| #[inline] |
| pub const fn to_le(self) -> Self { |
| #[cfg(target_endian = "little")] |
| { |
| self |
| } |
| #[cfg(not(target_endian = "little"))] |
| { |
| self.swap_bytes() |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked integer addition. Computes `self + rhs`, returning `None` |
| if overflow occurred. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!((", stringify!($SelfT), |
| "::MAX - 2).checked_add(1), Some(", stringify!($SelfT), "::MAX - 1)); |
| assert_eq!((", stringify!($SelfT), "::MAX - 2).checked_add(3), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_add(self, rhs: Self) -> Option<Self> { |
| let (a, b) = self.overflowing_add(rhs); |
| if unlikely!(b) {None} else {Some(a)} |
| } |
| } |
| |
| doc_comment! { |
| concat!("Unchecked integer addition. Computes `self + rhs`, assuming overflow |
| cannot occur. This results in undefined behavior when `self + rhs > ", stringify!($SelfT), |
| "::MAX` or `self + rhs < ", stringify!($SelfT), "::MIN`."), |
| #[unstable( |
| feature = "unchecked_math", |
| reason = "niche optimization path", |
| issue = "none", |
| )] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub unsafe fn unchecked_add(self, rhs: Self) -> Self { |
| // SAFETY: the caller must uphold the safety contract for |
| // `unchecked_add`. |
| unsafe { intrinsics::unchecked_add(self, rhs) } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked integer subtraction. Computes `self - rhs`, returning `None` if |
| overflow occurred. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!((", stringify!($SelfT), |
| "::MIN + 2).checked_sub(1), Some(", stringify!($SelfT), "::MIN + 1)); |
| assert_eq!((", stringify!($SelfT), "::MIN + 2).checked_sub(3), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_sub(self, rhs: Self) -> Option<Self> { |
| let (a, b) = self.overflowing_sub(rhs); |
| if unlikely!(b) {None} else {Some(a)} |
| } |
| } |
| |
| doc_comment! { |
| concat!("Unchecked integer subtraction. Computes `self - rhs`, assuming overflow |
| cannot occur. This results in undefined behavior when `self - rhs > ", stringify!($SelfT), |
| "::MAX` or `self - rhs < ", stringify!($SelfT), "::MIN`."), |
| #[unstable( |
| feature = "unchecked_math", |
| reason = "niche optimization path", |
| issue = "none", |
| )] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub unsafe fn unchecked_sub(self, rhs: Self) -> Self { |
| // SAFETY: the caller must uphold the safety contract for |
| // `unchecked_sub`. |
| unsafe { intrinsics::unchecked_sub(self, rhs) } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked integer multiplication. Computes `self * rhs`, returning `None` if |
| overflow occurred. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(", stringify!($SelfT), |
| "::MAX.checked_mul(1), Some(", stringify!($SelfT), "::MAX)); |
| assert_eq!(", stringify!($SelfT), "::MAX.checked_mul(2), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_mul(self, rhs: Self) -> Option<Self> { |
| let (a, b) = self.overflowing_mul(rhs); |
| if unlikely!(b) {None} else {Some(a)} |
| } |
| } |
| |
| doc_comment! { |
| concat!("Unchecked integer multiplication. Computes `self * rhs`, assuming overflow |
| cannot occur. This results in undefined behavior when `self * rhs > ", stringify!($SelfT), |
| "::MAX` or `self * rhs < ", stringify!($SelfT), "::MIN`."), |
| #[unstable( |
| feature = "unchecked_math", |
| reason = "niche optimization path", |
| issue = "none", |
| )] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub unsafe fn unchecked_mul(self, rhs: Self) -> Self { |
| // SAFETY: the caller must uphold the safety contract for |
| // `unchecked_mul`. |
| unsafe { intrinsics::unchecked_mul(self, rhs) } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked integer division. Computes `self / rhs`, returning `None` if `rhs == 0` |
| or the division results in overflow. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!((", stringify!($SelfT), |
| "::MIN + 1).checked_div(-1), Some(", stringify!($Max), ")); |
| assert_eq!(", stringify!($SelfT), "::MIN.checked_div(-1), None); |
| assert_eq!((1", stringify!($SelfT), ").checked_div(0), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_checked_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_div(self, rhs: Self) -> Option<Self> { |
| if unlikely!(rhs == 0 || (self == Self::MIN && rhs == -1)) { |
| None |
| } else { |
| // SAFETY: div by zero and by INT_MIN have been checked above |
| Some(unsafe { intrinsics::unchecked_div(self, rhs) }) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked Euclidean division. Computes `self.div_euclid(rhs)`, |
| returning `None` if `rhs == 0` or the division results in overflow. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!((", stringify!($SelfT), |
| "::MIN + 1).checked_div_euclid(-1), Some(", stringify!($Max), ")); |
| assert_eq!(", stringify!($SelfT), "::MIN.checked_div_euclid(-1), None); |
| assert_eq!((1", stringify!($SelfT), ").checked_div_euclid(0), None); |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_div_euclid(self, rhs: Self) -> Option<Self> { |
| if unlikely!(rhs == 0 || (self == Self::MIN && rhs == -1)) { |
| None |
| } else { |
| Some(self.div_euclid(rhs)) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked integer remainder. Computes `self % rhs`, returning `None` if |
| `rhs == 0` or the division results in overflow. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(5", stringify!($SelfT), ".checked_rem(2), Some(1)); |
| assert_eq!(5", stringify!($SelfT), ".checked_rem(0), None); |
| assert_eq!(", stringify!($SelfT), "::MIN.checked_rem(-1), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_unstable(feature = "const_checked_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_rem(self, rhs: Self) -> Option<Self> { |
| if unlikely!(rhs == 0 || (self == Self::MIN && rhs == -1)) { |
| None |
| } else { |
| // SAFETY: div by zero and by INT_MIN have been checked above |
| Some(unsafe { intrinsics::unchecked_rem(self, rhs) }) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked Euclidean remainder. Computes `self.rem_euclid(rhs)`, returning `None` |
| if `rhs == 0` or the division results in overflow. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!(5", stringify!($SelfT), ".checked_rem_euclid(2), Some(1)); |
| assert_eq!(5", stringify!($SelfT), ".checked_rem_euclid(0), None); |
| assert_eq!(", stringify!($SelfT), "::MIN.checked_rem_euclid(-1), None); |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_rem_euclid(self, rhs: Self) -> Option<Self> { |
| if unlikely!(rhs == 0 || (self == Self::MIN && rhs == -1)) { |
| None |
| } else { |
| Some(self.rem_euclid(rhs)) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked negation. Computes `-self`, returning `None` if `self == MIN`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(5", stringify!($SelfT), ".checked_neg(), Some(-5)); |
| assert_eq!(", stringify!($SelfT), "::MIN.checked_neg(), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[inline] |
| pub const fn checked_neg(self) -> Option<Self> { |
| let (a, b) = self.overflowing_neg(); |
| if unlikely!(b) {None} else {Some(a)} |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked shift left. Computes `self << rhs`, returning `None` if `rhs` is larger |
| than or equal to the number of bits in `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(0x1", stringify!($SelfT), ".checked_shl(4), Some(0x10)); |
| assert_eq!(0x1", stringify!($SelfT), ".checked_shl(129), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_shl(self, rhs: u32) -> Option<Self> { |
| let (a, b) = self.overflowing_shl(rhs); |
| if unlikely!(b) {None} else {Some(a)} |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked shift right. Computes `self >> rhs`, returning `None` if `rhs` is |
| larger than or equal to the number of bits in `self`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(0x10", stringify!($SelfT), ".checked_shr(4), Some(0x1)); |
| assert_eq!(0x10", stringify!($SelfT), ".checked_shr(128), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_shr(self, rhs: u32) -> Option<Self> { |
| let (a, b) = self.overflowing_shr(rhs); |
| if unlikely!(b) {None} else {Some(a)} |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked absolute value. Computes `self.abs()`, returning `None` if |
| `self == MIN`. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!((-5", stringify!($SelfT), ").checked_abs(), Some(5)); |
| assert_eq!(", stringify!($SelfT), "::MIN.checked_abs(), None);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "no_panic_abs", since = "1.13.0")] |
| #[rustc_const_stable(feature = "const_checked_int_methods", since = "1.47.0")] |
| #[inline] |
| pub const fn checked_abs(self) -> Option<Self> { |
| if self.is_negative() { |
| self.checked_neg() |
| } else { |
| Some(self) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Checked exponentiation. Computes `self.pow(exp)`, returning `None` if |
| overflow occurred. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(8", stringify!($SelfT), ".checked_pow(2), Some(64)); |
| assert_eq!(", stringify!($SelfT), "::MAX.checked_pow(2), None);", |
| $EndFeature, " |
| ```"), |
| |
| #[stable(feature = "no_panic_pow", since = "1.34.0")] |
| #[rustc_const_unstable(feature = "const_int_pow", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn checked_pow(self, mut exp: u32) -> Option<Self> { |
| if exp == 0 { |
| return Some(1); |
| } |
| let mut base = self; |
| let mut acc: Self = 1; |
| |
| while exp > 1 { |
| if (exp & 1) == 1 { |
| acc = try_opt!(acc.checked_mul(base)); |
| } |
| exp /= 2; |
| base = try_opt!(base.checked_mul(base)); |
| } |
| // since exp!=0, finally the exp must be 1. |
| // Deal with the final bit of the exponent separately, since |
| // squaring the base afterwards is not necessary and may cause a |
| // needless overflow. |
| Some(try_opt!(acc.checked_mul(base))) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Saturating integer addition. Computes `self + rhs`, saturating at the numeric |
| bounds instead of overflowing. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".saturating_add(1), 101); |
| assert_eq!(", stringify!($SelfT), "::MAX.saturating_add(100), ", stringify!($SelfT), |
| "::MAX); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_add(-1), ", stringify!($SelfT), |
| "::MIN);", |
| $EndFeature, " |
| ```"), |
| |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_saturating_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn saturating_add(self, rhs: Self) -> Self { |
| intrinsics::saturating_add(self, rhs) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Saturating integer subtraction. Computes `self - rhs`, saturating at the |
| numeric bounds instead of overflowing. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".saturating_sub(127), -27); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_sub(100), ", stringify!($SelfT), |
| "::MIN); |
| assert_eq!(", stringify!($SelfT), "::MAX.saturating_sub(-1), ", stringify!($SelfT), |
| "::MAX);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_saturating_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn saturating_sub(self, rhs: Self) -> Self { |
| intrinsics::saturating_sub(self, rhs) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Saturating integer negation. Computes `-self`, returning `MAX` if `self == MIN` |
| instead of overflowing. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".saturating_neg(), -100); |
| assert_eq!((-100", stringify!($SelfT), ").saturating_neg(), 100); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_neg(), ", stringify!($SelfT), |
| "::MAX); |
| assert_eq!(", stringify!($SelfT), "::MAX.saturating_neg(), ", stringify!($SelfT), |
| "::MIN + 1);", |
| $EndFeature, " |
| ```"), |
| |
| #[stable(feature = "saturating_neg", since = "1.45.0")] |
| #[rustc_const_stable(feature = "const_saturating_int_methods", since = "1.47.0")] |
| #[inline] |
| pub const fn saturating_neg(self) -> Self { |
| intrinsics::saturating_sub(0, self) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Saturating absolute value. Computes `self.abs()`, returning `MAX` if `self == |
| MIN` instead of overflowing. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".saturating_abs(), 100); |
| assert_eq!((-100", stringify!($SelfT), ").saturating_abs(), 100); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_abs(), ", stringify!($SelfT), |
| "::MAX); |
| assert_eq!((", stringify!($SelfT), "::MIN + 1).saturating_abs(), ", stringify!($SelfT), |
| "::MAX);", |
| $EndFeature, " |
| ```"), |
| |
| #[stable(feature = "saturating_neg", since = "1.45.0")] |
| #[rustc_const_stable(feature = "const_saturating_int_methods", since = "1.47.0")] |
| #[inline] |
| pub const fn saturating_abs(self) -> Self { |
| if self.is_negative() { |
| self.saturating_neg() |
| } else { |
| self |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Saturating integer multiplication. Computes `self * rhs`, saturating at the |
| numeric bounds instead of overflowing. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(10", stringify!($SelfT), ".saturating_mul(12), 120); |
| assert_eq!(", stringify!($SelfT), "::MAX.saturating_mul(10), ", stringify!($SelfT), "::MAX); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_mul(10), ", stringify!($SelfT), "::MIN);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_saturating_int_methods", since = "1.47.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn saturating_mul(self, rhs: Self) -> Self { |
| match self.checked_mul(rhs) { |
| Some(x) => x, |
| None => if (self < 0) == (rhs < 0) { |
| Self::MAX |
| } else { |
| Self::MIN |
| } |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Saturating integer exponentiation. Computes `self.pow(exp)`, |
| saturating at the numeric bounds instead of overflowing. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!((-4", stringify!($SelfT), ").saturating_pow(3), -64); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_pow(2), ", stringify!($SelfT), "::MAX); |
| assert_eq!(", stringify!($SelfT), "::MIN.saturating_pow(3), ", stringify!($SelfT), "::MIN);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "no_panic_pow", since = "1.34.0")] |
| #[rustc_const_unstable(feature = "const_int_pow", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn saturating_pow(self, exp: u32) -> Self { |
| match self.checked_pow(exp) { |
| Some(x) => x, |
| None if self < 0 && exp % 2 == 1 => Self::MIN, |
| None => Self::MAX, |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) addition. Computes `self + rhs`, wrapping around at the |
| boundary of the type. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".wrapping_add(27), 127); |
| assert_eq!(", stringify!($SelfT), "::MAX.wrapping_add(2), ", stringify!($SelfT), |
| "::MIN + 1);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_add(self, rhs: Self) -> Self { |
| intrinsics::wrapping_add(self, rhs) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) subtraction. Computes `self - rhs`, wrapping around at the |
| boundary of the type. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(0", stringify!($SelfT), ".wrapping_sub(127), -127); |
| assert_eq!((-2", stringify!($SelfT), ").wrapping_sub(", stringify!($SelfT), "::MAX), ", |
| stringify!($SelfT), "::MAX);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_sub(self, rhs: Self) -> Self { |
| intrinsics::wrapping_sub(self, rhs) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) multiplication. Computes `self * rhs`, wrapping around at |
| the boundary of the type. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(10", stringify!($SelfT), ".wrapping_mul(12), 120); |
| assert_eq!(11i8.wrapping_mul(12), -124);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_mul(self, rhs: Self) -> Self { |
| intrinsics::wrapping_mul(self, rhs) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) division. Computes `self / rhs`, wrapping around at the |
| boundary of the type. |
| |
| The only case where such wrapping can occur is when one divides `MIN / -1` on a signed type (where |
| `MIN` is the negative minimal value for the type); this is equivalent to `-MIN`, a positive value |
| that is too large to represent in the type. In such a case, this function returns `MIN` itself. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".wrapping_div(10), 10); |
| assert_eq!((-128i8).wrapping_div(-1), -128);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "num_wrapping", since = "1.2.0")] |
| #[rustc_const_unstable(feature = "const_wrapping_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_div(self, rhs: Self) -> Self { |
| self.overflowing_div(rhs).0 |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping Euclidean division. Computes `self.div_euclid(rhs)`, |
| wrapping around at the boundary of the type. |
| |
| Wrapping will only occur in `MIN / -1` on a signed type (where `MIN` is the negative minimal value |
| for the type). This is equivalent to `-MIN`, a positive value that is too large to represent in the |
| type. In this case, this method returns `MIN` itself. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!(100", stringify!($SelfT), ".wrapping_div_euclid(10), 10); |
| assert_eq!((-128i8).wrapping_div_euclid(-1), -128); |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_div_euclid(self, rhs: Self) -> Self { |
| self.overflowing_div_euclid(rhs).0 |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) remainder. Computes `self % rhs`, wrapping around at the |
| boundary of the type. |
| |
| Such wrap-around never actually occurs mathematically; implementation artifacts make `x % y` |
| invalid for `MIN / -1` on a signed type (where `MIN` is the negative minimal value). In such a case, |
| this function returns `0`. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".wrapping_rem(10), 0); |
| assert_eq!((-128i8).wrapping_rem(-1), 0);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "num_wrapping", since = "1.2.0")] |
| #[rustc_const_unstable(feature = "const_wrapping_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_rem(self, rhs: Self) -> Self { |
| self.overflowing_rem(rhs).0 |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping Euclidean remainder. Computes `self.rem_euclid(rhs)`, wrapping around |
| at the boundary of the type. |
| |
| Wrapping will only occur in `MIN % -1` on a signed type (where `MIN` is the negative minimal value |
| for the type). In this case, this method returns 0. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!(100", stringify!($SelfT), ".wrapping_rem_euclid(10), 0); |
| assert_eq!((-128i8).wrapping_rem_euclid(-1), 0); |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_rem_euclid(self, rhs: Self) -> Self { |
| self.overflowing_rem_euclid(rhs).0 |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) negation. Computes `-self`, wrapping around at the boundary |
| of the type. |
| |
| The only case where such wrapping can occur is when one negates `MIN` on a signed type (where `MIN` |
| is the negative minimal value for the type); this is a positive value that is too large to represent |
| in the type. In such a case, this function returns `MIN` itself. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".wrapping_neg(), -100); |
| assert_eq!(", stringify!($SelfT), "::MIN.wrapping_neg(), ", stringify!($SelfT), |
| "::MIN);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "num_wrapping", since = "1.2.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn wrapping_neg(self) -> Self { |
| self.overflowing_neg().0 |
| } |
| } |
| |
| doc_comment! { |
| concat!("Panic-free bitwise shift-left; yields `self << mask(rhs)`, where `mask` removes |
| any high-order bits of `rhs` that would cause the shift to exceed the bitwidth of the type. |
| |
| Note that this is *not* the same as a rotate-left; the RHS of a wrapping shift-left is restricted to |
| the range of the type, rather than the bits shifted out of the LHS being returned to the other end. |
| The primitive integer types all implement a `[`rotate_left`](#method.rotate_left) function, |
| which may be what you want instead. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!((-1", stringify!($SelfT), ").wrapping_shl(7), -128); |
| assert_eq!((-1", stringify!($SelfT), ").wrapping_shl(128), -1);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "num_wrapping", since = "1.2.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_shl(self, rhs: u32) -> Self { |
| // SAFETY: the masking by the bitsize of the type ensures that we do not shift |
| // out of bounds |
| unsafe { |
| intrinsics::unchecked_shl(self, (rhs & ($BITS - 1)) as $SelfT) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Panic-free bitwise shift-right; yields `self >> mask(rhs)`, where `mask` |
| removes any high-order bits of `rhs` that would cause the shift to exceed the bitwidth of the type. |
| |
| Note that this is *not* the same as a rotate-right; the RHS of a wrapping shift-right is restricted |
| to the range of the type, rather than the bits shifted out of the LHS being returned to the other |
| end. The primitive integer types all implement a [`rotate_right`](#method.rotate_right) function, |
| which may be what you want instead. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!((-128", stringify!($SelfT), ").wrapping_shr(7), -1); |
| assert_eq!((-128i16).wrapping_shr(64), -128);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "num_wrapping", since = "1.2.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_shr(self, rhs: u32) -> Self { |
| // SAFETY: the masking by the bitsize of the type ensures that we do not shift |
| // out of bounds |
| unsafe { |
| intrinsics::unchecked_shr(self, (rhs & ($BITS - 1)) as $SelfT) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) absolute value. Computes `self.abs()`, wrapping around at |
| the boundary of the type. |
| |
| The only case where such wrapping can occur is when one takes the absolute value of the negative |
| minimal value for the type; this is a positive value that is too large to represent in the type. In |
| such a case, this function returns `MIN` itself. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(100", stringify!($SelfT), ".wrapping_abs(), 100); |
| assert_eq!((-100", stringify!($SelfT), ").wrapping_abs(), 100); |
| assert_eq!(", stringify!($SelfT), "::MIN.wrapping_abs(), ", stringify!($SelfT), |
| "::MIN); |
| assert_eq!((-128i8).wrapping_abs() as u8, 128);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "no_panic_abs", since = "1.13.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[allow(unused_attributes)] |
| #[inline] |
| pub const fn wrapping_abs(self) -> Self { |
| if self.is_negative() { |
| self.wrapping_neg() |
| } else { |
| self |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Computes the absolute value of `self` without any wrapping |
| or panicking. |
| |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "#![feature(unsigned_abs)] |
| assert_eq!(100", stringify!($SelfT), ".unsigned_abs(), 100", stringify!($UnsignedT), "); |
| assert_eq!((-100", stringify!($SelfT), ").unsigned_abs(), 100", stringify!($UnsignedT), "); |
| assert_eq!((-128i8).unsigned_abs(), 128u8);", |
| $EndFeature, " |
| ```"), |
| #[unstable(feature = "unsigned_abs", issue = "74913")] |
| #[inline] |
| pub const fn unsigned_abs(self) -> $UnsignedT { |
| self.wrapping_abs() as $UnsignedT |
| } |
| } |
| |
| doc_comment! { |
| concat!("Wrapping (modular) exponentiation. Computes `self.pow(exp)`, |
| wrapping around at the boundary of the type. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(3", stringify!($SelfT), ".wrapping_pow(4), 81); |
| assert_eq!(3i8.wrapping_pow(5), -13); |
| assert_eq!(3i8.wrapping_pow(6), -39);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "no_panic_pow", since = "1.34.0")] |
| #[rustc_const_unstable(feature = "const_int_pow", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn wrapping_pow(self, mut exp: u32) -> Self { |
| if exp == 0 { |
| return 1; |
| } |
| let mut base = self; |
| let mut acc: Self = 1; |
| |
| while exp > 1 { |
| if (exp & 1) == 1 { |
| acc = acc.wrapping_mul(base); |
| } |
| exp /= 2; |
| base = base.wrapping_mul(base); |
| } |
| |
| // since exp!=0, finally the exp must be 1. |
| // Deal with the final bit of the exponent separately, since |
| // squaring the base afterwards is not necessary and may cause a |
| // needless overflow. |
| acc.wrapping_mul(base) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates `self` + `rhs` |
| |
| Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would |
| occur. If an overflow would have occurred then the wrapped value is returned. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(5", stringify!($SelfT), ".overflowing_add(2), (7, false)); |
| assert_eq!(", stringify!($SelfT), "::MAX.overflowing_add(1), (", stringify!($SelfT), |
| "::MIN, true));", $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_add(self, rhs: Self) -> (Self, bool) { |
| let (a, b) = intrinsics::add_with_overflow(self as $ActualT, rhs as $ActualT); |
| (a as Self, b) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates `self` - `rhs` |
| |
| Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow |
| would occur. If an overflow would have occurred then the wrapped value is returned. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(5", stringify!($SelfT), ".overflowing_sub(2), (3, false)); |
| assert_eq!(", stringify!($SelfT), "::MIN.overflowing_sub(1), (", stringify!($SelfT), |
| "::MAX, true));", $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_sub(self, rhs: Self) -> (Self, bool) { |
| let (a, b) = intrinsics::sub_with_overflow(self as $ActualT, rhs as $ActualT); |
| (a as Self, b) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates the multiplication of `self` and `rhs`. |
| |
| Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow |
| would occur. If an overflow would have occurred then the wrapped value is returned. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(5", stringify!($SelfT), ".overflowing_mul(2), (10, false)); |
| assert_eq!(1_000_000_000i32.overflowing_mul(10), (1410065408, true));", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_mul(self, rhs: Self) -> (Self, bool) { |
| let (a, b) = intrinsics::mul_with_overflow(self as $ActualT, rhs as $ActualT); |
| (a as Self, b) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates the divisor when `self` is divided by `rhs`. |
| |
| Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would |
| occur. If an overflow would occur then self is returned. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(5", stringify!($SelfT), ".overflowing_div(2), (2, false)); |
| assert_eq!(", stringify!($SelfT), "::MIN.overflowing_div(-1), (", stringify!($SelfT), |
| "::MIN, true));", |
| $EndFeature, " |
| ```"), |
| #[inline] |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_unstable(feature = "const_overflowing_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| pub const fn overflowing_div(self, rhs: Self) -> (Self, bool) { |
| if unlikely!(self == Self::MIN && rhs == -1) { |
| (self, true) |
| } else { |
| (self / rhs, false) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates the quotient of Euclidean division `self.div_euclid(rhs)`. |
| |
| Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would |
| occur. If an overflow would occur then `self` is returned. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!(5", stringify!($SelfT), ".overflowing_div_euclid(2), (2, false)); |
| assert_eq!(", stringify!($SelfT), "::MIN.overflowing_div_euclid(-1), (", stringify!($SelfT), |
| "::MIN, true)); |
| ```"), |
| #[inline] |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| pub const fn overflowing_div_euclid(self, rhs: Self) -> (Self, bool) { |
| if unlikely!(self == Self::MIN && rhs == -1) { |
| (self, true) |
| } else { |
| (self.div_euclid(rhs), false) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates the remainder when `self` is divided by `rhs`. |
| |
| Returns a tuple of the remainder after dividing along with a boolean indicating whether an |
| arithmetic overflow would occur. If an overflow would occur then 0 is returned. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, " |
| assert_eq!(5", stringify!($SelfT), ".overflowing_rem(2), (1, false)); |
| assert_eq!(", stringify!($SelfT), "::MIN.overflowing_rem(-1), (0, true));", |
| $EndFeature, " |
| ```"), |
| #[inline] |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_unstable(feature = "const_overflowing_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| pub const fn overflowing_rem(self, rhs: Self) -> (Self, bool) { |
| if unlikely!(self == Self::MIN && rhs == -1) { |
| (0, true) |
| } else { |
| (self % rhs, false) |
| } |
| } |
| } |
| |
| |
| doc_comment! { |
| concat!("Overflowing Euclidean remainder. Calculates `self.rem_euclid(rhs)`. |
| |
| Returns a tuple of the remainder after dividing along with a boolean indicating whether an |
| arithmetic overflow would occur. If an overflow would occur then 0 is returned. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!(5", stringify!($SelfT), ".overflowing_rem_euclid(2), (1, false)); |
| assert_eq!(", stringify!($SelfT), "::MIN.overflowing_rem_euclid(-1), (0, true)); |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_rem_euclid(self, rhs: Self) -> (Self, bool) { |
| if unlikely!(self == Self::MIN && rhs == -1) { |
| (0, true) |
| } else { |
| (self.rem_euclid(rhs), false) |
| } |
| } |
| } |
| |
| |
| doc_comment! { |
| concat!("Negates self, overflowing if this is equal to the minimum value. |
| |
| Returns a tuple of the negated version of self along with a boolean indicating whether an overflow |
| happened. If `self` is the minimum value (e.g., `i32::MIN` for values of type `i32`), then the |
| minimum value will be returned again and `true` will be returned for an overflow happening. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| assert_eq!(2", stringify!($SelfT), ".overflowing_neg(), (-2, false)); |
| assert_eq!(", stringify!($SelfT), "::MIN.overflowing_neg(), (", stringify!($SelfT), |
| "::MIN, true));", $EndFeature, " |
| ```"), |
| #[inline] |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[allow(unused_attributes)] |
| pub const fn overflowing_neg(self) -> (Self, bool) { |
| if unlikely!(self == Self::MIN) { |
| (Self::MIN, true) |
| } else { |
| (-self, false) |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Shifts self left by `rhs` bits. |
| |
| Returns a tuple of the shifted version of self along with a boolean indicating whether the shift |
| value was larger than or equal to the number of bits. If the shift value is too large, then value is |
| masked (N-1) where N is the number of bits, and this value is then used to perform the shift. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(0x1", stringify!($SelfT),".overflowing_shl(4), (0x10, false)); |
| assert_eq!(0x1i32.overflowing_shl(36), (0x10, true));", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_shl(self, rhs: u32) -> (Self, bool) { |
| (self.wrapping_shl(rhs), (rhs > ($BITS - 1))) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Shifts self right by `rhs` bits. |
| |
| Returns a tuple of the shifted version of self along with a boolean indicating whether the shift |
| value was larger than or equal to the number of bits. If the shift value is too large, then value is |
| masked (N-1) where N is the number of bits, and this value is then used to perform the shift. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(0x10", stringify!($SelfT), ".overflowing_shr(4), (0x1, false)); |
| assert_eq!(0x10i32.overflowing_shr(36), (0x1, true));", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "wrapping", since = "1.7.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_shr(self, rhs: u32) -> (Self, bool) { |
| (self.wrapping_shr(rhs), (rhs > ($BITS - 1))) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Computes the absolute value of `self`. |
| |
| Returns a tuple of the absolute version of self along with a boolean indicating whether an overflow |
| happened. If self is the minimum value (e.g., ", stringify!($SelfT), "::MIN for values of type |
| ", stringify!($SelfT), "), then the minimum value will be returned again and true will be returned |
| for an overflow happening. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(10", stringify!($SelfT), ".overflowing_abs(), (10, false)); |
| assert_eq!((-10", stringify!($SelfT), ").overflowing_abs(), (10, false)); |
| assert_eq!((", stringify!($SelfT), "::MIN).overflowing_abs(), (", stringify!($SelfT), |
| "::MIN, true));", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "no_panic_abs", since = "1.13.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn overflowing_abs(self) -> (Self, bool) { |
| (self.wrapping_abs(), self == Self::MIN) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Raises self to the power of `exp`, using exponentiation by squaring. |
| |
| Returns a tuple of the exponentiation along with a bool indicating |
| whether an overflow happened. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(3", stringify!($SelfT), ".overflowing_pow(4), (81, false)); |
| assert_eq!(3i8.overflowing_pow(5), (-13, true));", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "no_panic_pow", since = "1.34.0")] |
| #[rustc_const_unstable(feature = "const_int_pow", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| pub const fn overflowing_pow(self, mut exp: u32) -> (Self, bool) { |
| if exp == 0 { |
| return (1,false); |
| } |
| let mut base = self; |
| let mut acc: Self = 1; |
| let mut overflown = false; |
| // Scratch space for storing results of overflowing_mul. |
| let mut r; |
| |
| while exp > 1 { |
| if (exp & 1) == 1 { |
| r = acc.overflowing_mul(base); |
| acc = r.0; |
| overflown |= r.1; |
| } |
| exp /= 2; |
| r = base.overflowing_mul(base); |
| base = r.0; |
| overflown |= r.1; |
| } |
| |
| // since exp!=0, finally the exp must be 1. |
| // Deal with the final bit of the exponent separately, since |
| // squaring the base afterwards is not necessary and may cause a |
| // needless overflow. |
| r = acc.overflowing_mul(base); |
| r.1 |= overflown; |
| r |
| } |
| } |
| |
| doc_comment! { |
| concat!("Raises self to the power of `exp`, using exponentiation by squaring. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "let x: ", stringify!($SelfT), " = 2; // or any other integer type |
| |
| assert_eq!(x.pow(5), 32);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_unstable(feature = "const_int_pow", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| #[rustc_inherit_overflow_checks] |
| pub const fn pow(self, mut exp: u32) -> Self { |
| if exp == 0 { |
| return 1; |
| } |
| let mut base = self; |
| let mut acc = 1; |
| |
| while exp > 1 { |
| if (exp & 1) == 1 { |
| acc = acc * base; |
| } |
| exp /= 2; |
| base = base * base; |
| } |
| |
| // since exp!=0, finally the exp must be 1. |
| // Deal with the final bit of the exponent separately, since |
| // squaring the base afterwards is not necessary and may cause a |
| // needless overflow. |
| acc * base |
| } |
| } |
| |
| doc_comment! { |
| concat!("Calculates the quotient of Euclidean division of `self` by `rhs`. |
| |
| This computes the integer `n` such that `self = n * rhs + self.rem_euclid(rhs)`, |
| with `0 <= self.rem_euclid(rhs) < rhs`. |
| |
| In other words, the result is `self / rhs` rounded to the integer `n` |
| such that `self >= n * rhs`. |
| If `self > 0`, this is equal to round towards zero (the default in Rust); |
| if `self < 0`, this is equal to round towards +/- infinity. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0 or the division results in overflow. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| let a: ", stringify!($SelfT), " = 7; // or any other integer type |
| let b = 4; |
| |
| assert_eq!(a.div_euclid(b), 1); // 7 >= 4 * 1 |
| assert_eq!(a.div_euclid(-b), -1); // 7 >= -4 * -1 |
| assert_eq!((-a).div_euclid(b), -2); // -7 >= 4 * -2 |
| assert_eq!((-a).div_euclid(-b), 2); // -7 >= -4 * 2 |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| #[rustc_inherit_overflow_checks] |
| pub const fn div_euclid(self, rhs: Self) -> Self { |
| let q = self / rhs; |
| if self % rhs < 0 { |
| return if rhs > 0 { q - 1 } else { q + 1 } |
| } |
| q |
| } |
| } |
| |
| |
| doc_comment! { |
| concat!("Calculates the least nonnegative remainder of `self (mod rhs)`. |
| |
| This is done as if by the Euclidean division algorithm -- given |
| `r = self.rem_euclid(rhs)`, `self = rhs * self.div_euclid(rhs) + r`, and |
| `0 <= r < abs(rhs)`. |
| |
| # Panics |
| |
| This function will panic if `rhs` is 0 or the division results in overflow. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| let a: ", stringify!($SelfT), " = 7; // or any other integer type |
| let b = 4; |
| |
| assert_eq!(a.rem_euclid(b), 3); |
| assert_eq!((-a).rem_euclid(b), 1); |
| assert_eq!(a.rem_euclid(-b), 3); |
| assert_eq!((-a).rem_euclid(-b), 1); |
| ```"), |
| #[stable(feature = "euclidean_division", since = "1.38.0")] |
| #[rustc_const_unstable(feature = "const_euclidean_int_methods", issue = "53718")] |
| #[must_use = "this returns the result of the operation, \ |
| without modifying the original"] |
| #[inline] |
| #[rustc_inherit_overflow_checks] |
| pub const fn rem_euclid(self, rhs: Self) -> Self { |
| let r = self % rhs; |
| if r < 0 { |
| if rhs < 0 { |
| r - rhs |
| } else { |
| r + rhs |
| } |
| } else { |
| r |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Computes the absolute value of `self`. |
| |
| # Overflow behavior |
| |
| The absolute value of `", stringify!($SelfT), "::MIN` cannot be represented as an |
| `", stringify!($SelfT), "`, and attempting to calculate it will cause an overflow. This means that |
| code in debug mode will trigger a panic on this case and optimized code will return `", |
| stringify!($SelfT), "::MIN` without a panic. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(10", stringify!($SelfT), ".abs(), 10); |
| assert_eq!((-10", stringify!($SelfT), ").abs(), 10);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[allow(unused_attributes)] |
| #[inline] |
| #[rustc_inherit_overflow_checks] |
| pub const fn abs(self) -> Self { |
| // Note that the #[inline] above means that the overflow |
| // semantics of the subtraction depend on the crate we're being |
| // inlined into. |
| if self.is_negative() { |
| -self |
| } else { |
| self |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns a number representing sign of `self`. |
| |
| - `0` if the number is zero |
| - `1` if the number is positive |
| - `-1` if the number is negative |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert_eq!(10", stringify!($SelfT), ".signum(), 1); |
| assert_eq!(0", stringify!($SelfT), ".signum(), 0); |
| assert_eq!((-10", stringify!($SelfT), ").signum(), -1);", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_sign", since = "1.47.0")] |
| #[inline] |
| pub const fn signum(self) -> Self { |
| match self { |
| n if n > 0 => 1, |
| 0 => 0, |
| _ => -1, |
| } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Returns `true` if `self` is positive and `false` if the number is zero or |
| negative. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert!(10", stringify!($SelfT), ".is_positive()); |
| assert!(!(-10", stringify!($SelfT), ").is_positive());", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn is_positive(self) -> bool { self > 0 } |
| } |
| |
| doc_comment! { |
| concat!("Returns `true` if `self` is negative and `false` if the number is zero or |
| positive. |
| |
| # Examples |
| |
| Basic usage: |
| |
| ``` |
| ", $Feature, "assert!((-10", stringify!($SelfT), ").is_negative()); |
| assert!(!10", stringify!($SelfT), ".is_negative());", |
| $EndFeature, " |
| ```"), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[rustc_const_stable(feature = "const_int_methods", since = "1.32.0")] |
| #[inline] |
| pub const fn is_negative(self) -> bool { self < 0 } |
| } |
| |
| doc_comment! { |
| concat!("Return the memory representation of this integer as a byte array in |
| big-endian (network) byte order. |
| ", |
| $to_xe_bytes_doc, |
| " |
| # Examples |
| |
| ``` |
| let bytes = ", $swap_op, stringify!($SelfT), ".to_be_bytes(); |
| assert_eq!(bytes, ", $be_bytes, "); |
| ```"), |
| #[stable(feature = "int_to_from_bytes", since = "1.32.0")] |
| #[rustc_const_stable(feature = "const_int_conversion", since = "1.44.0")] |
| #[inline] |
| pub const fn to_be_bytes(self) -> [u8; mem::size_of::<Self>()] { |
| self.to_be().to_ne_bytes() |
| } |
| } |
| |
| doc_comment! { |
| concat!("Return the memory representation of this integer as a byte array in |
| little-endian byte order. |
| ", |
| $to_xe_bytes_doc, |
| " |
| # Examples |
| |
| ``` |
| let bytes = ", $swap_op, stringify!($SelfT), ".to_le_bytes(); |
| assert_eq!(bytes, ", $le_bytes, "); |
| ```"), |
| #[stable(feature = "int_to_from_bytes", since = "1.32.0")] |
| #[rustc_const_stable(feature = "const_int_conversion", since = "1.44.0")] |
| #[inline] |
| pub const fn to_le_bytes(self) -> [u8; mem::size_of::<Self>()] { |
| self.to_le().to_ne_bytes() |
| } |
| } |
| |
| doc_comment! { |
| concat!(" |
| Return the memory representation of this integer as a byte array in |
| native byte order. |
| |
| As the target platform's native endianness is used, portable code |
| should use [`to_be_bytes`] or [`to_le_bytes`], as appropriate, |
| instead. |
| ", |
| $to_xe_bytes_doc, |
| " |
| [`to_be_bytes`]: #method.to_be_bytes |
| [`to_le_bytes`]: #method.to_le_bytes |
| |
| # Examples |
| |
| ``` |
| let bytes = ", $swap_op, stringify!($SelfT), ".to_ne_bytes(); |
| assert_eq!( |
| bytes, |
| if cfg!(target_endian = \"big\") { |
| ", $be_bytes, " |
| } else { |
| ", $le_bytes, " |
| } |
| ); |
| ```"), |
| #[stable(feature = "int_to_from_bytes", since = "1.32.0")] |
| #[rustc_const_stable(feature = "const_int_conversion", since = "1.44.0")] |
| // SAFETY: const sound because integers are plain old datatypes so we can always |
| // transmute them to arrays of bytes |
| #[allow_internal_unstable(const_fn_transmute)] |
| #[inline] |
| pub const fn to_ne_bytes(self) -> [u8; mem::size_of::<Self>()] { |
| // SAFETY: integers are plain old datatypes so we can always transmute them to |
| // arrays of bytes |
| unsafe { mem::transmute(self) } |
| } |
| } |
| |
| doc_comment! { |
| concat!(" |
| Return the memory representation of this integer as a byte array in |
| native byte order. |
| |
| [`to_ne_bytes`] should be preferred over this whenever possible. |
| |
| [`to_ne_bytes`]: #method.to_ne_bytes |
| ", |
| |
| " |
| # Examples |
| |
| ``` |
| #![feature(num_as_ne_bytes)] |
| let num = ", $swap_op, stringify!($SelfT), "; |
| let bytes = num.as_ne_bytes(); |
| assert_eq!( |
| bytes, |
| if cfg!(target_endian = \"big\") { |
| &", $be_bytes, " |
| } else { |
| &", $le_bytes, " |
| } |
| ); |
| ```"), |
| #[unstable(feature = "num_as_ne_bytes", issue = "76976")] |
| #[inline] |
| pub fn as_ne_bytes(&self) -> &[u8; mem::size_of::<Self>()] { |
| // SAFETY: integers are plain old datatypes so we can always transmute them to |
| // arrays of bytes |
| unsafe { &*(self as *const Self as *const _) } |
| } |
| } |
| |
| doc_comment! { |
| concat!("Create an integer value from its representation as a byte array in |
| big endian. |
| ", |
| $from_xe_bytes_doc, |
| " |
| # Examples |
| |
| ``` |
| let value = ", stringify!($SelfT), "::from_be_bytes(", $be_bytes, "); |
| assert_eq!(value, ", $swap_op, "); |
| ``` |
| |
| When starting from a slice rather than an array, fallible conversion APIs can be used: |
| |
| ``` |
| use std::convert::TryInto; |
| |
| fn read_be_", stringify!($SelfT), "(input: &mut &[u8]) -> ", stringify!($SelfT), " { |
| let (int_bytes, rest) = input.split_at(std::mem::size_of::<", stringify!($SelfT), ">()); |
| *input = rest; |
| ", stringify!($SelfT), "::from_be_bytes(int_bytes.try_into().unwrap()) |
| } |
| ```"), |
| #[stable(feature = "int_to_from_bytes", since = "1.32.0")] |
| #[rustc_const_stable(feature = "const_int_conversion", since = "1.44.0")] |
| #[inline] |
| pub const fn from_be_bytes(bytes: [u8; mem::size_of::<Self>()]) -> Self { |
| Self::from_be(Self::from_ne_bytes(bytes)) |
| } |
| } |
| |
| doc_comment! { |
| concat!(" |
| Create an integer value from its representation as a byte array in |
| little endian. |
| ", |
| $from_xe_bytes_doc, |
| " |
| # Examples |
| |
| ``` |
| let value = ", stringify!($SelfT), "::from_le_bytes(", $le_bytes, "); |
| assert_eq!(value, ", $swap_op, "); |
| ``` |
| |
| When starting from a slice rather than an array, fallible conversion APIs can be used: |
| |
| ``` |
| use std::convert::TryInto; |
| |
| fn read_le_", stringify!($SelfT), "(input: &mut &[u8]) -> ", stringify!($SelfT), " { |
| let (int_bytes, rest) = input.split_at(std::mem::size_of::<", stringify!($SelfT), ">()); |
| *input = rest; |
| ", stringify!($SelfT), "::from_le_bytes(int_bytes.try_into().unwrap()) |
| } |
| ```"), |
| #[stable(feature = "int_to_from_bytes", since = "1.32.0")] |
| #[rustc_const_stable(feature = "const_int_conversion", since = "1.44.0")] |
| #[inline] |
| pub const fn from_le_bytes(bytes: [u8; mem::size_of::<Self>()]) -> Self { |
| Self::from_le(Self::from_ne_bytes(bytes)) |
| } |
| } |
| |
| doc_comment! { |
| concat!("Create an integer value from its memory representation as a byte |
| array in native endianness. |
| |
| As the target platform's native endianness is used, portable code |
| likely wants to use [`from_be_bytes`] or [`from_le_bytes`], as |
| appropriate instead. |
| |
| [`from_be_bytes`]: #method.from_be_bytes |
| [`from_le_bytes`]: #method.from_le_bytes |
| ", |
| $from_xe_bytes_doc, |
| " |
| # Examples |
| |
| ``` |
| let value = ", stringify!($SelfT), "::from_ne_bytes(if cfg!(target_endian = \"big\") { |
| ", $be_bytes, " |
| } else { |
| ", $le_bytes, " |
| }); |
| assert_eq!(value, ", $swap_op, "); |
| ``` |
| |
| When starting from a slice rather than an array, fallible conversion APIs can be used: |
| |
| ``` |
| use std::convert::TryInto; |
| |
| fn read_ne_", stringify!($SelfT), "(input: &mut &[u8]) -> ", stringify!($SelfT), " { |
| let (int_bytes, rest) = input.split_at(std::mem::size_of::<", stringify!($SelfT), ">()); |
| *input = rest; |
| ", stringify!($SelfT), "::from_ne_bytes(int_bytes.try_into().unwrap()) |
| } |
| ```"), |
| #[stable(feature = "int_to_from_bytes", since = "1.32.0")] |
| #[rustc_const_stable(feature = "const_int_conversion", since = "1.44.0")] |
| // SAFETY: const sound because integers are plain old datatypes so we can always |
| // transmute to them |
| #[allow_internal_unstable(const_fn_transmute)] |
| #[inline] |
| pub const fn from_ne_bytes(bytes: [u8; mem::size_of::<Self>()]) -> Self { |
| // SAFETY: integers are plain old datatypes so we can always transmute to them |
| unsafe { mem::transmute(bytes) } |
| } |
| } |
| |
| doc_comment! { |
| concat!("**This method is soft-deprecated.** |
| |
| Although using it won’t cause a compilation warning, |
| new code should use [`", stringify!($SelfT), "::MIN", "`](#associatedconstant.MIN) instead. |
| |
| Returns the smallest value that can be represented by this integer type."), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[inline(always)] |
| #[rustc_promotable] |
| #[rustc_const_stable(feature = "const_min_value", since = "1.32.0")] |
| pub const fn min_value() -> Self { |
| Self::MIN |
| } |
| } |
| |
| doc_comment! { |
| concat!("**This method is soft-deprecated.** |
| |
| Although using it won’t cause a compilation warning, |
| new code should use [`", stringify!($SelfT), "::MAX", "`](#associatedconstant.MAX) instead. |
| |
| Returns the largest value that can be represented by this integer type."), |
| #[stable(feature = "rust1", since = "1.0.0")] |
| #[inline(always)] |
| #[rustc_promotable] |
| #[rustc_const_stable(feature = "const_max_value", since = "1.32.0")] |
| pub const fn max_value() -> Self { |
| Self::MAX |
| } |
| } |
| } |
| } |