| //! # Rust Compiler Self-Profiling |
| //! |
| //! This module implements the basic framework for the compiler's self- |
| //! profiling support. It provides the `SelfProfiler` type which enables |
| //! recording "events". An event is something that starts and ends at a given |
| //! point in time and has an ID and a kind attached to it. This allows for |
| //! tracing the compiler's activity. |
| //! |
| //! Internally this module uses the custom tailored [measureme][mm] crate for |
| //! efficiently recording events to disk in a compact format that can be |
| //! post-processed and analyzed by the suite of tools in the `measureme` |
| //! project. The highest priority for the tracing framework is on incurring as |
| //! little overhead as possible. |
| //! |
| //! |
| //! ## Event Overview |
| //! |
| //! Events have a few properties: |
| //! |
| //! - The `event_kind` designates the broad category of an event (e.g. does it |
| //! correspond to the execution of a query provider or to loading something |
| //! from the incr. comp. on-disk cache, etc). |
| //! - The `event_id` designates the query invocation or function call it |
| //! corresponds to, possibly including the query key or function arguments. |
| //! - Each event stores the ID of the thread it was recorded on. |
| //! - The timestamp stores beginning and end of the event, or the single point |
| //! in time it occurred at for "instant" events. |
| //! |
| //! |
| //! ## Event Filtering |
| //! |
| //! Event generation can be filtered by event kind. Recording all possible |
| //! events generates a lot of data, much of which is not needed for most kinds |
| //! of analysis. So, in order to keep overhead as low as possible for a given |
| //! use case, the `SelfProfiler` will only record the kinds of events that |
| //! pass the filter specified as a command line argument to the compiler. |
| //! |
| //! |
| //! ## `event_id` Assignment |
| //! |
| //! As far as `measureme` is concerned, `event_id`s are just strings. However, |
| //! it would incur too much overhead to generate and persist each `event_id` |
| //! string at the point where the event is recorded. In order to make this more |
| //! efficient `measureme` has two features: |
| //! |
| //! - Strings can share their content, so that re-occurring parts don't have to |
| //! be copied over and over again. One allocates a string in `measureme` and |
| //! gets back a `StringId`. This `StringId` is then used to refer to that |
| //! string. `measureme` strings are actually DAGs of string components so that |
| //! arbitrary sharing of substrings can be done efficiently. This is useful |
| //! because `event_id`s contain lots of redundant text like query names or |
| //! def-path components. |
| //! |
| //! - `StringId`s can be "virtual" which means that the client picks a numeric |
| //! ID according to some application-specific scheme and can later make that |
| //! ID be mapped to an actual string. This is used to cheaply generate |
| //! `event_id`s while the events actually occur, causing little timing |
| //! distortion, and then later map those `StringId`s, in bulk, to actual |
| //! `event_id` strings. This way the largest part of the tracing overhead is |
| //! localized to one contiguous chunk of time. |
| //! |
| //! How are these `event_id`s generated in the compiler? For things that occur |
| //! infrequently (e.g. "generic activities"), we just allocate the string the |
| //! first time it is used and then keep the `StringId` in a hash table. This |
| //! is implemented in `SelfProfiler::get_or_alloc_cached_string()`. |
| //! |
| //! For queries it gets more interesting: First we need a unique numeric ID for |
| //! each query invocation (the `QueryInvocationId`). This ID is used as the |
| //! virtual `StringId` we use as `event_id` for a given event. This ID has to |
| //! be available both when the query is executed and later, together with the |
| //! query key, when we allocate the actual `event_id` strings in bulk. |
| //! |
| //! We could make the compiler generate and keep track of such an ID for each |
| //! query invocation but luckily we already have something that fits all the |
| //! the requirements: the query's `DepNodeIndex`. So we use the numeric value |
| //! of the `DepNodeIndex` as `event_id` when recording the event and then, |
| //! just before the query context is dropped, we walk the entire query cache |
| //! (which stores the `DepNodeIndex` along with the query key for each |
| //! invocation) and allocate the corresponding strings together with a mapping |
| //! for `DepNodeIndex as StringId`. |
| //! |
| //! [mm]: https://github.com/rust-lang/measureme/ |
| |
| use crate::fx::FxHashMap; |
| use crate::outline; |
| |
| use std::borrow::Borrow; |
| use std::collections::hash_map::Entry; |
| use std::error::Error; |
| use std::fmt::Display; |
| use std::fs; |
| use std::intrinsics::unlikely; |
| use std::path::Path; |
| use std::process; |
| use std::sync::Arc; |
| use std::time::{Duration, Instant}; |
| |
| pub use measureme::EventId; |
| use measureme::{EventIdBuilder, Profiler, SerializableString, StringId}; |
| use parking_lot::RwLock; |
| use smallvec::SmallVec; |
| use tracing::warn; |
| |
| bitflags::bitflags! { |
| #[derive(Clone, Copy)] |
| struct EventFilter: u16 { |
| const GENERIC_ACTIVITIES = 1 << 0; |
| const QUERY_PROVIDERS = 1 << 1; |
| const QUERY_CACHE_HITS = 1 << 2; |
| const QUERY_BLOCKED = 1 << 3; |
| const INCR_CACHE_LOADS = 1 << 4; |
| |
| const QUERY_KEYS = 1 << 5; |
| const FUNCTION_ARGS = 1 << 6; |
| const LLVM = 1 << 7; |
| const INCR_RESULT_HASHING = 1 << 8; |
| const ARTIFACT_SIZES = 1 << 9; |
| |
| const DEFAULT = Self::GENERIC_ACTIVITIES.bits() | |
| Self::QUERY_PROVIDERS.bits() | |
| Self::QUERY_BLOCKED.bits() | |
| Self::INCR_CACHE_LOADS.bits() | |
| Self::INCR_RESULT_HASHING.bits() | |
| Self::ARTIFACT_SIZES.bits(); |
| |
| const ARGS = Self::QUERY_KEYS.bits() | Self::FUNCTION_ARGS.bits(); |
| } |
| } |
| |
| // keep this in sync with the `-Z self-profile-events` help message in rustc_session/options.rs |
| const EVENT_FILTERS_BY_NAME: &[(&str, EventFilter)] = &[ |
| ("none", EventFilter::empty()), |
| ("all", EventFilter::all()), |
| ("default", EventFilter::DEFAULT), |
| ("generic-activity", EventFilter::GENERIC_ACTIVITIES), |
| ("query-provider", EventFilter::QUERY_PROVIDERS), |
| ("query-cache-hit", EventFilter::QUERY_CACHE_HITS), |
| ("query-blocked", EventFilter::QUERY_BLOCKED), |
| ("incr-cache-load", EventFilter::INCR_CACHE_LOADS), |
| ("query-keys", EventFilter::QUERY_KEYS), |
| ("function-args", EventFilter::FUNCTION_ARGS), |
| ("args", EventFilter::ARGS), |
| ("llvm", EventFilter::LLVM), |
| ("incr-result-hashing", EventFilter::INCR_RESULT_HASHING), |
| ("artifact-sizes", EventFilter::ARTIFACT_SIZES), |
| ]; |
| |
| /// Something that uniquely identifies a query invocation. |
| pub struct QueryInvocationId(pub u32); |
| |
| /// Which format to use for `-Z time-passes` |
| #[derive(Clone, Copy, PartialEq, Hash, Debug)] |
| pub enum TimePassesFormat { |
| /// Emit human readable text |
| Text, |
| /// Emit structured JSON |
| Json, |
| } |
| |
| /// A reference to the SelfProfiler. It can be cloned and sent across thread |
| /// boundaries at will. |
| #[derive(Clone)] |
| pub struct SelfProfilerRef { |
| // This field is `None` if self-profiling is disabled for the current |
| // compilation session. |
| profiler: Option<Arc<SelfProfiler>>, |
| |
| // We store the filter mask directly in the reference because that doesn't |
| // cost anything and allows for filtering with checking if the profiler is |
| // actually enabled. |
| event_filter_mask: EventFilter, |
| |
| // Print verbose generic activities to stderr. |
| print_verbose_generic_activities: Option<TimePassesFormat>, |
| } |
| |
| impl SelfProfilerRef { |
| pub fn new( |
| profiler: Option<Arc<SelfProfiler>>, |
| print_verbose_generic_activities: Option<TimePassesFormat>, |
| ) -> SelfProfilerRef { |
| // If there is no SelfProfiler then the filter mask is set to NONE, |
| // ensuring that nothing ever tries to actually access it. |
| let event_filter_mask = |
| profiler.as_ref().map_or(EventFilter::empty(), |p| p.event_filter_mask); |
| |
| SelfProfilerRef { profiler, event_filter_mask, print_verbose_generic_activities } |
| } |
| |
| /// This shim makes sure that calls only get executed if the filter mask |
| /// lets them pass. It also contains some trickery to make sure that |
| /// code is optimized for non-profiling compilation sessions, i.e. anything |
| /// past the filter check is never inlined so it doesn't clutter the fast |
| /// path. |
| #[inline(always)] |
| fn exec<F>(&self, event_filter: EventFilter, f: F) -> TimingGuard<'_> |
| where |
| F: for<'a> FnOnce(&'a SelfProfiler) -> TimingGuard<'a>, |
| { |
| #[inline(never)] |
| #[cold] |
| fn cold_call<F>(profiler_ref: &SelfProfilerRef, f: F) -> TimingGuard<'_> |
| where |
| F: for<'a> FnOnce(&'a SelfProfiler) -> TimingGuard<'a>, |
| { |
| let profiler = profiler_ref.profiler.as_ref().unwrap(); |
| f(profiler) |
| } |
| |
| if self.event_filter_mask.contains(event_filter) { |
| cold_call(self, f) |
| } else { |
| TimingGuard::none() |
| } |
| } |
| |
| /// Start profiling a verbose generic activity. Profiling continues until the |
| /// VerboseTimingGuard returned from this call is dropped. In addition to recording |
| /// a measureme event, "verbose" generic activities also print a timing entry to |
| /// stderr if the compiler is invoked with -Ztime-passes. |
| pub fn verbose_generic_activity(&self, event_label: &'static str) -> VerboseTimingGuard<'_> { |
| let message_and_format = |
| self.print_verbose_generic_activities.map(|format| (event_label.to_owned(), format)); |
| |
| VerboseTimingGuard::start(message_and_format, self.generic_activity(event_label)) |
| } |
| |
| /// Like `verbose_generic_activity`, but with an extra arg. |
| pub fn verbose_generic_activity_with_arg<A>( |
| &self, |
| event_label: &'static str, |
| event_arg: A, |
| ) -> VerboseTimingGuard<'_> |
| where |
| A: Borrow<str> + Into<String>, |
| { |
| let message_and_format = self |
| .print_verbose_generic_activities |
| .map(|format| (format!("{}({})", event_label, event_arg.borrow()), format)); |
| |
| VerboseTimingGuard::start( |
| message_and_format, |
| self.generic_activity_with_arg(event_label, event_arg), |
| ) |
| } |
| |
| /// Start profiling a generic activity. Profiling continues until the |
| /// TimingGuard returned from this call is dropped. |
| #[inline(always)] |
| pub fn generic_activity(&self, event_label: &'static str) -> TimingGuard<'_> { |
| self.exec(EventFilter::GENERIC_ACTIVITIES, |profiler| { |
| let event_label = profiler.get_or_alloc_cached_string(event_label); |
| let event_id = EventId::from_label(event_label); |
| TimingGuard::start(profiler, profiler.generic_activity_event_kind, event_id) |
| }) |
| } |
| |
| /// Start profiling with some event filter for a given event. Profiling continues until the |
| /// TimingGuard returned from this call is dropped. |
| #[inline(always)] |
| pub fn generic_activity_with_event_id(&self, event_id: EventId) -> TimingGuard<'_> { |
| self.exec(EventFilter::GENERIC_ACTIVITIES, |profiler| { |
| TimingGuard::start(profiler, profiler.generic_activity_event_kind, event_id) |
| }) |
| } |
| |
| /// Start profiling a generic activity. Profiling continues until the |
| /// TimingGuard returned from this call is dropped. |
| #[inline(always)] |
| pub fn generic_activity_with_arg<A>( |
| &self, |
| event_label: &'static str, |
| event_arg: A, |
| ) -> TimingGuard<'_> |
| where |
| A: Borrow<str> + Into<String>, |
| { |
| self.exec(EventFilter::GENERIC_ACTIVITIES, |profiler| { |
| let builder = EventIdBuilder::new(&profiler.profiler); |
| let event_label = profiler.get_or_alloc_cached_string(event_label); |
| let event_id = if profiler.event_filter_mask.contains(EventFilter::FUNCTION_ARGS) { |
| let event_arg = profiler.get_or_alloc_cached_string(event_arg); |
| builder.from_label_and_arg(event_label, event_arg) |
| } else { |
| builder.from_label(event_label) |
| }; |
| TimingGuard::start(profiler, profiler.generic_activity_event_kind, event_id) |
| }) |
| } |
| |
| /// Start profiling a generic activity, allowing costly arguments to be recorded. Profiling |
| /// continues until the `TimingGuard` returned from this call is dropped. |
| /// |
| /// If the arguments to a generic activity are cheap to create, use `generic_activity_with_arg` |
| /// or `generic_activity_with_args` for their simpler API. However, if they are costly or |
| /// require allocation in sufficiently hot contexts, then this allows for a closure to be called |
| /// only when arguments were asked to be recorded via `-Z self-profile-events=args`. |
| /// |
| /// In this case, the closure will be passed a `&mut EventArgRecorder`, to help with recording |
| /// one or many arguments within the generic activity being profiled, by calling its |
| /// `record_arg` method for example. |
| /// |
| /// This `EventArgRecorder` may implement more specific traits from other rustc crates, e.g. for |
| /// richer handling of rustc-specific argument types, while keeping this single entry-point API |
| /// for recording arguments. |
| /// |
| /// Note: recording at least one argument is *required* for the self-profiler to create the |
| /// `TimingGuard`. A panic will be triggered if that doesn't happen. This function exists |
| /// explicitly to record arguments, so it fails loudly when there are none to record. |
| /// |
| #[inline(always)] |
| pub fn generic_activity_with_arg_recorder<F>( |
| &self, |
| event_label: &'static str, |
| mut f: F, |
| ) -> TimingGuard<'_> |
| where |
| F: FnMut(&mut EventArgRecorder<'_>), |
| { |
| // Ensure this event will only be recorded when self-profiling is turned on. |
| self.exec(EventFilter::GENERIC_ACTIVITIES, |profiler| { |
| let builder = EventIdBuilder::new(&profiler.profiler); |
| let event_label = profiler.get_or_alloc_cached_string(event_label); |
| |
| // Ensure the closure to create event arguments will only be called when argument |
| // recording is turned on. |
| let event_id = if profiler.event_filter_mask.contains(EventFilter::FUNCTION_ARGS) { |
| // Set up the builder and call the user-provided closure to record potentially |
| // costly event arguments. |
| let mut recorder = EventArgRecorder { profiler, args: SmallVec::new() }; |
| f(&mut recorder); |
| |
| // It is expected that the closure will record at least one argument. If that |
| // doesn't happen, it's a bug: we've been explicitly called in order to record |
| // arguments, so we fail loudly when there are none to record. |
| if recorder.args.is_empty() { |
| panic!( |
| "The closure passed to `generic_activity_with_arg_recorder` needs to \ |
| record at least one argument" |
| ); |
| } |
| |
| builder.from_label_and_args(event_label, &recorder.args) |
| } else { |
| builder.from_label(event_label) |
| }; |
| TimingGuard::start(profiler, profiler.generic_activity_event_kind, event_id) |
| }) |
| } |
| |
| /// Record the size of an artifact that the compiler produces |
| /// |
| /// `artifact_kind` is the class of artifact (e.g., query_cache, object_file, etc.) |
| /// `artifact_name` is an identifier to the specific artifact being stored (usually a filename) |
| #[inline(always)] |
| pub fn artifact_size<A>(&self, artifact_kind: &str, artifact_name: A, size: u64) |
| where |
| A: Borrow<str> + Into<String>, |
| { |
| drop(self.exec(EventFilter::ARTIFACT_SIZES, |profiler| { |
| let builder = EventIdBuilder::new(&profiler.profiler); |
| let event_label = profiler.get_or_alloc_cached_string(artifact_kind); |
| let event_arg = profiler.get_or_alloc_cached_string(artifact_name); |
| let event_id = builder.from_label_and_arg(event_label, event_arg); |
| let thread_id = get_thread_id(); |
| |
| profiler.profiler.record_integer_event( |
| profiler.artifact_size_event_kind, |
| event_id, |
| thread_id, |
| size, |
| ); |
| |
| TimingGuard::none() |
| })) |
| } |
| |
| #[inline(always)] |
| pub fn generic_activity_with_args( |
| &self, |
| event_label: &'static str, |
| event_args: &[String], |
| ) -> TimingGuard<'_> { |
| self.exec(EventFilter::GENERIC_ACTIVITIES, |profiler| { |
| let builder = EventIdBuilder::new(&profiler.profiler); |
| let event_label = profiler.get_or_alloc_cached_string(event_label); |
| let event_id = if profiler.event_filter_mask.contains(EventFilter::FUNCTION_ARGS) { |
| let event_args: Vec<_> = event_args |
| .iter() |
| .map(|s| profiler.get_or_alloc_cached_string(&s[..])) |
| .collect(); |
| builder.from_label_and_args(event_label, &event_args) |
| } else { |
| builder.from_label(event_label) |
| }; |
| TimingGuard::start(profiler, profiler.generic_activity_event_kind, event_id) |
| }) |
| } |
| |
| /// Start profiling a query provider. Profiling continues until the |
| /// TimingGuard returned from this call is dropped. |
| #[inline(always)] |
| pub fn query_provider(&self) -> TimingGuard<'_> { |
| self.exec(EventFilter::QUERY_PROVIDERS, |profiler| { |
| TimingGuard::start(profiler, profiler.query_event_kind, EventId::INVALID) |
| }) |
| } |
| |
| /// Record a query in-memory cache hit. |
| #[inline(always)] |
| pub fn query_cache_hit(&self, query_invocation_id: QueryInvocationId) { |
| #[inline(never)] |
| #[cold] |
| fn cold_call(profiler_ref: &SelfProfilerRef, query_invocation_id: QueryInvocationId) { |
| profiler_ref.instant_query_event( |
| |profiler| profiler.query_cache_hit_event_kind, |
| query_invocation_id, |
| ); |
| } |
| |
| if unlikely(self.event_filter_mask.contains(EventFilter::QUERY_CACHE_HITS)) { |
| cold_call(self, query_invocation_id); |
| } |
| } |
| |
| /// Start profiling a query being blocked on a concurrent execution. |
| /// Profiling continues until the TimingGuard returned from this call is |
| /// dropped. |
| #[inline(always)] |
| pub fn query_blocked(&self) -> TimingGuard<'_> { |
| self.exec(EventFilter::QUERY_BLOCKED, |profiler| { |
| TimingGuard::start(profiler, profiler.query_blocked_event_kind, EventId::INVALID) |
| }) |
| } |
| |
| /// Start profiling how long it takes to load a query result from the |
| /// incremental compilation on-disk cache. Profiling continues until the |
| /// TimingGuard returned from this call is dropped. |
| #[inline(always)] |
| pub fn incr_cache_loading(&self) -> TimingGuard<'_> { |
| self.exec(EventFilter::INCR_CACHE_LOADS, |profiler| { |
| TimingGuard::start( |
| profiler, |
| profiler.incremental_load_result_event_kind, |
| EventId::INVALID, |
| ) |
| }) |
| } |
| |
| /// Start profiling how long it takes to hash query results for incremental compilation. |
| /// Profiling continues until the TimingGuard returned from this call is dropped. |
| #[inline(always)] |
| pub fn incr_result_hashing(&self) -> TimingGuard<'_> { |
| self.exec(EventFilter::INCR_RESULT_HASHING, |profiler| { |
| TimingGuard::start( |
| profiler, |
| profiler.incremental_result_hashing_event_kind, |
| EventId::INVALID, |
| ) |
| }) |
| } |
| |
| #[inline(always)] |
| fn instant_query_event( |
| &self, |
| event_kind: fn(&SelfProfiler) -> StringId, |
| query_invocation_id: QueryInvocationId, |
| ) { |
| let event_id = StringId::new_virtual(query_invocation_id.0); |
| let thread_id = get_thread_id(); |
| let profiler = self.profiler.as_ref().unwrap(); |
| profiler.profiler.record_instant_event( |
| event_kind(profiler), |
| EventId::from_virtual(event_id), |
| thread_id, |
| ); |
| } |
| |
| pub fn with_profiler(&self, f: impl FnOnce(&SelfProfiler)) { |
| if let Some(profiler) = &self.profiler { |
| f(profiler) |
| } |
| } |
| |
| /// Gets a `StringId` for the given string. This method makes sure that |
| /// any strings going through it will only be allocated once in the |
| /// profiling data. |
| /// Returns `None` if the self-profiling is not enabled. |
| pub fn get_or_alloc_cached_string(&self, s: &str) -> Option<StringId> { |
| self.profiler.as_ref().map(|p| p.get_or_alloc_cached_string(s)) |
| } |
| |
| #[inline] |
| pub fn enabled(&self) -> bool { |
| self.profiler.is_some() |
| } |
| |
| #[inline] |
| pub fn llvm_recording_enabled(&self) -> bool { |
| self.event_filter_mask.contains(EventFilter::LLVM) |
| } |
| #[inline] |
| pub fn get_self_profiler(&self) -> Option<Arc<SelfProfiler>> { |
| self.profiler.clone() |
| } |
| } |
| |
| /// A helper for recording costly arguments to self-profiling events. Used with |
| /// `SelfProfilerRef::generic_activity_with_arg_recorder`. |
| pub struct EventArgRecorder<'p> { |
| /// The `SelfProfiler` used to intern the event arguments that users will ask to record. |
| profiler: &'p SelfProfiler, |
| |
| /// The interned event arguments to be recorded in the generic activity event. |
| /// |
| /// The most common case, when actually recording event arguments, is to have one argument. Then |
| /// followed by recording two, in a couple places. |
| args: SmallVec<[StringId; 2]>, |
| } |
| |
| impl EventArgRecorder<'_> { |
| /// Records a single argument within the current generic activity being profiled. |
| /// |
| /// Note: when self-profiling with costly event arguments, at least one argument |
| /// needs to be recorded. A panic will be triggered if that doesn't happen. |
| pub fn record_arg<A>(&mut self, event_arg: A) |
| where |
| A: Borrow<str> + Into<String>, |
| { |
| let event_arg = self.profiler.get_or_alloc_cached_string(event_arg); |
| self.args.push(event_arg); |
| } |
| } |
| |
| pub struct SelfProfiler { |
| profiler: Profiler, |
| event_filter_mask: EventFilter, |
| |
| string_cache: RwLock<FxHashMap<String, StringId>>, |
| |
| query_event_kind: StringId, |
| generic_activity_event_kind: StringId, |
| incremental_load_result_event_kind: StringId, |
| incremental_result_hashing_event_kind: StringId, |
| query_blocked_event_kind: StringId, |
| query_cache_hit_event_kind: StringId, |
| artifact_size_event_kind: StringId, |
| } |
| |
| impl SelfProfiler { |
| pub fn new( |
| output_directory: &Path, |
| crate_name: Option<&str>, |
| event_filters: Option<&[String]>, |
| counter_name: &str, |
| ) -> Result<SelfProfiler, Box<dyn Error + Send + Sync>> { |
| fs::create_dir_all(output_directory)?; |
| |
| let crate_name = crate_name.unwrap_or("unknown-crate"); |
| // HACK(eddyb) we need to pad the PID, strange as it may seem, as its |
| // length can behave as a source of entropy for heap addresses, when |
| // ASLR is disabled and the heap is otherwise deterministic. |
| let pid: u32 = process::id(); |
| let filename = format!("{crate_name}-{pid:07}.rustc_profile"); |
| let path = output_directory.join(&filename); |
| let profiler = |
| Profiler::with_counter(&path, measureme::counters::Counter::by_name(counter_name)?)?; |
| |
| let query_event_kind = profiler.alloc_string("Query"); |
| let generic_activity_event_kind = profiler.alloc_string("GenericActivity"); |
| let incremental_load_result_event_kind = profiler.alloc_string("IncrementalLoadResult"); |
| let incremental_result_hashing_event_kind = |
| profiler.alloc_string("IncrementalResultHashing"); |
| let query_blocked_event_kind = profiler.alloc_string("QueryBlocked"); |
| let query_cache_hit_event_kind = profiler.alloc_string("QueryCacheHit"); |
| let artifact_size_event_kind = profiler.alloc_string("ArtifactSize"); |
| |
| let mut event_filter_mask = EventFilter::empty(); |
| |
| if let Some(event_filters) = event_filters { |
| let mut unknown_events = vec![]; |
| for item in event_filters { |
| if let Some(&(_, mask)) = |
| EVENT_FILTERS_BY_NAME.iter().find(|&(name, _)| name == item) |
| { |
| event_filter_mask |= mask; |
| } else { |
| unknown_events.push(item.clone()); |
| } |
| } |
| |
| // Warn about any unknown event names |
| if !unknown_events.is_empty() { |
| unknown_events.sort(); |
| unknown_events.dedup(); |
| |
| warn!( |
| "Unknown self-profiler events specified: {}. Available options are: {}.", |
| unknown_events.join(", "), |
| EVENT_FILTERS_BY_NAME |
| .iter() |
| .map(|&(name, _)| name.to_string()) |
| .collect::<Vec<_>>() |
| .join(", ") |
| ); |
| } |
| } else { |
| event_filter_mask = EventFilter::DEFAULT; |
| } |
| |
| Ok(SelfProfiler { |
| profiler, |
| event_filter_mask, |
| string_cache: RwLock::new(FxHashMap::default()), |
| query_event_kind, |
| generic_activity_event_kind, |
| incremental_load_result_event_kind, |
| incremental_result_hashing_event_kind, |
| query_blocked_event_kind, |
| query_cache_hit_event_kind, |
| artifact_size_event_kind, |
| }) |
| } |
| |
| /// Allocates a new string in the profiling data. Does not do any caching |
| /// or deduplication. |
| pub fn alloc_string<STR: SerializableString + ?Sized>(&self, s: &STR) -> StringId { |
| self.profiler.alloc_string(s) |
| } |
| |
| /// Gets a `StringId` for the given string. This method makes sure that |
| /// any strings going through it will only be allocated once in the |
| /// profiling data. |
| pub fn get_or_alloc_cached_string<A>(&self, s: A) -> StringId |
| where |
| A: Borrow<str> + Into<String>, |
| { |
| // Only acquire a read-lock first since we assume that the string is |
| // already present in the common case. |
| { |
| let string_cache = self.string_cache.read(); |
| |
| if let Some(&id) = string_cache.get(s.borrow()) { |
| return id; |
| } |
| } |
| |
| let mut string_cache = self.string_cache.write(); |
| // Check if the string has already been added in the small time window |
| // between dropping the read lock and acquiring the write lock. |
| match string_cache.entry(s.into()) { |
| Entry::Occupied(e) => *e.get(), |
| Entry::Vacant(e) => { |
| let string_id = self.profiler.alloc_string(&e.key()[..]); |
| *e.insert(string_id) |
| } |
| } |
| } |
| |
| pub fn map_query_invocation_id_to_string(&self, from: QueryInvocationId, to: StringId) { |
| let from = StringId::new_virtual(from.0); |
| self.profiler.map_virtual_to_concrete_string(from, to); |
| } |
| |
| pub fn bulk_map_query_invocation_id_to_single_string<I>(&self, from: I, to: StringId) |
| where |
| I: Iterator<Item = QueryInvocationId> + ExactSizeIterator, |
| { |
| let from = from.map(|qid| StringId::new_virtual(qid.0)); |
| self.profiler.bulk_map_virtual_to_single_concrete_string(from, to); |
| } |
| |
| pub fn query_key_recording_enabled(&self) -> bool { |
| self.event_filter_mask.contains(EventFilter::QUERY_KEYS) |
| } |
| |
| pub fn event_id_builder(&self) -> EventIdBuilder<'_> { |
| EventIdBuilder::new(&self.profiler) |
| } |
| } |
| |
| #[must_use] |
| pub struct TimingGuard<'a>(Option<measureme::TimingGuard<'a>>); |
| |
| impl<'a> TimingGuard<'a> { |
| #[inline] |
| pub fn start( |
| profiler: &'a SelfProfiler, |
| event_kind: StringId, |
| event_id: EventId, |
| ) -> TimingGuard<'a> { |
| let thread_id = get_thread_id(); |
| let raw_profiler = &profiler.profiler; |
| let timing_guard = |
| raw_profiler.start_recording_interval_event(event_kind, event_id, thread_id); |
| TimingGuard(Some(timing_guard)) |
| } |
| |
| #[inline] |
| pub fn finish_with_query_invocation_id(self, query_invocation_id: QueryInvocationId) { |
| if let Some(guard) = self.0 { |
| outline(|| { |
| let event_id = StringId::new_virtual(query_invocation_id.0); |
| let event_id = EventId::from_virtual(event_id); |
| guard.finish_with_override_event_id(event_id); |
| }); |
| } |
| } |
| |
| #[inline] |
| pub fn none() -> TimingGuard<'a> { |
| TimingGuard(None) |
| } |
| |
| #[inline(always)] |
| pub fn run<R>(self, f: impl FnOnce() -> R) -> R { |
| let _timer = self; |
| f() |
| } |
| } |
| |
| struct VerboseInfo { |
| start_time: Instant, |
| start_rss: Option<usize>, |
| message: String, |
| format: TimePassesFormat, |
| } |
| |
| #[must_use] |
| pub struct VerboseTimingGuard<'a> { |
| info: Option<VerboseInfo>, |
| _guard: TimingGuard<'a>, |
| } |
| |
| impl<'a> VerboseTimingGuard<'a> { |
| pub fn start( |
| message_and_format: Option<(String, TimePassesFormat)>, |
| _guard: TimingGuard<'a>, |
| ) -> Self { |
| VerboseTimingGuard { |
| _guard, |
| info: message_and_format.map(|(message, format)| VerboseInfo { |
| start_time: Instant::now(), |
| start_rss: get_resident_set_size(), |
| message, |
| format, |
| }), |
| } |
| } |
| |
| #[inline(always)] |
| pub fn run<R>(self, f: impl FnOnce() -> R) -> R { |
| let _timer = self; |
| f() |
| } |
| } |
| |
| impl Drop for VerboseTimingGuard<'_> { |
| fn drop(&mut self) { |
| if let Some(info) = &self.info { |
| let end_rss = get_resident_set_size(); |
| let dur = info.start_time.elapsed(); |
| print_time_passes_entry(&info.message, dur, info.start_rss, end_rss, info.format); |
| } |
| } |
| } |
| |
| struct JsonTimePassesEntry<'a> { |
| pass: &'a str, |
| time: f64, |
| start_rss: Option<usize>, |
| end_rss: Option<usize>, |
| } |
| |
| impl Display for JsonTimePassesEntry<'_> { |
| fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result { |
| let Self { pass: what, time, start_rss, end_rss } = self; |
| write!(f, r#"{{"pass":"{what}","time":{time},"rss_start":"#).unwrap(); |
| match start_rss { |
| Some(rss) => write!(f, "{rss}")?, |
| None => write!(f, "null")?, |
| } |
| write!(f, r#","rss_end":"#)?; |
| match end_rss { |
| Some(rss) => write!(f, "{rss}")?, |
| None => write!(f, "null")?, |
| } |
| write!(f, "}}")?; |
| Ok(()) |
| } |
| } |
| |
| pub fn print_time_passes_entry( |
| what: &str, |
| dur: Duration, |
| start_rss: Option<usize>, |
| end_rss: Option<usize>, |
| format: TimePassesFormat, |
| ) { |
| match format { |
| TimePassesFormat::Json => { |
| let entry = |
| JsonTimePassesEntry { pass: what, time: dur.as_secs_f64(), start_rss, end_rss }; |
| |
| eprintln!(r#"time: {entry}"#); |
| return; |
| } |
| TimePassesFormat::Text => (), |
| } |
| |
| // Print the pass if its duration is greater than 5 ms, or it changed the |
| // measured RSS. |
| let is_notable = || { |
| if dur.as_millis() > 5 { |
| return true; |
| } |
| |
| if let (Some(start_rss), Some(end_rss)) = (start_rss, end_rss) { |
| let change_rss = end_rss.abs_diff(start_rss); |
| if change_rss > 0 { |
| return true; |
| } |
| } |
| |
| false |
| }; |
| if !is_notable() { |
| return; |
| } |
| |
| let rss_to_mb = |rss| (rss as f64 / 1_000_000.0).round() as usize; |
| let rss_change_to_mb = |rss| (rss as f64 / 1_000_000.0).round() as i128; |
| |
| let mem_string = match (start_rss, end_rss) { |
| (Some(start_rss), Some(end_rss)) => { |
| let change_rss = end_rss as i128 - start_rss as i128; |
| |
| format!( |
| "; rss: {:>4}MB -> {:>4}MB ({:>+5}MB)", |
| rss_to_mb(start_rss), |
| rss_to_mb(end_rss), |
| rss_change_to_mb(change_rss), |
| ) |
| } |
| (Some(start_rss), None) => format!("; rss start: {:>4}MB", rss_to_mb(start_rss)), |
| (None, Some(end_rss)) => format!("; rss end: {:>4}MB", rss_to_mb(end_rss)), |
| (None, None) => String::new(), |
| }; |
| |
| eprintln!("time: {:>7}{}\t{}", duration_to_secs_str(dur), mem_string, what); |
| } |
| |
| // Hack up our own formatting for the duration to make it easier for scripts |
| // to parse (always use the same number of decimal places and the same unit). |
| pub fn duration_to_secs_str(dur: std::time::Duration) -> String { |
| format!("{:.3}", dur.as_secs_f64()) |
| } |
| |
| fn get_thread_id() -> u32 { |
| std::thread::current().id().as_u64().get() as u32 |
| } |
| |
| // Memory reporting |
| cfg_match! { |
| cfg(windows) => { |
| pub fn get_resident_set_size() -> Option<usize> { |
| use std::mem; |
| |
| use windows::{ |
| Win32::System::ProcessStatus::{K32GetProcessMemoryInfo, PROCESS_MEMORY_COUNTERS}, |
| Win32::System::Threading::GetCurrentProcess, |
| }; |
| |
| let mut pmc = PROCESS_MEMORY_COUNTERS::default(); |
| let pmc_size = mem::size_of_val(&pmc); |
| unsafe { |
| K32GetProcessMemoryInfo( |
| GetCurrentProcess(), |
| &mut pmc, |
| pmc_size as u32, |
| ) |
| } |
| .ok() |
| .ok()?; |
| |
| Some(pmc.WorkingSetSize) |
| } |
| } |
| cfg(target_os = "macos") => { |
| pub fn get_resident_set_size() -> Option<usize> { |
| use libc::{c_int, c_void, getpid, proc_pidinfo, proc_taskinfo, PROC_PIDTASKINFO}; |
| use std::mem; |
| const PROC_TASKINFO_SIZE: c_int = mem::size_of::<proc_taskinfo>() as c_int; |
| |
| unsafe { |
| let mut info: proc_taskinfo = mem::zeroed(); |
| let info_ptr = &mut info as *mut proc_taskinfo as *mut c_void; |
| let pid = getpid() as c_int; |
| let ret = proc_pidinfo(pid, PROC_PIDTASKINFO, 0, info_ptr, PROC_TASKINFO_SIZE); |
| if ret == PROC_TASKINFO_SIZE { |
| Some(info.pti_resident_size as usize) |
| } else { |
| None |
| } |
| } |
| } |
| } |
| cfg(unix) => { |
| pub fn get_resident_set_size() -> Option<usize> { |
| let field = 1; |
| let contents = fs::read("/proc/self/statm").ok()?; |
| let contents = String::from_utf8(contents).ok()?; |
| let s = contents.split_whitespace().nth(field)?; |
| let npages = s.parse::<usize>().ok()?; |
| Some(npages * 4096) |
| } |
| } |
| _ => { |
| pub fn get_resident_set_size() -> Option<usize> { |
| None |
| } |
| } |
| } |
| |
| #[cfg(test)] |
| mod tests; |
