| //! Implementation of compiling various phases of the compiler and standard |
| //! library. |
| //! |
| //! This module contains some of the real meat in the rustbuild build system |
| //! which is where Cargo is used to compiler the standard library, libtest, and |
| //! compiler. This module is also responsible for assembling the sysroot as it |
| //! goes along from the output of the previous stage. |
| |
| use std::borrow::Cow; |
| use std::env; |
| use std::fs; |
| use std::io::prelude::*; |
| use std::io::BufReader; |
| use std::path::{Path, PathBuf}; |
| use std::process::{exit, Command, Stdio}; |
| use std::str; |
| |
| use build_helper::{output, t, up_to_date}; |
| use filetime::FileTime; |
| use serde::Deserialize; |
| |
| use crate::builder::Cargo; |
| use crate::builder::{Builder, Kind, RunConfig, ShouldRun, Step}; |
| use crate::cache::{Interned, INTERNER}; |
| use crate::dist; |
| use crate::native; |
| use crate::tool::SourceType; |
| use crate::util::{exe, is_dylib, symlink_dir}; |
| use crate::{Compiler, DependencyType, GitRepo, Mode}; |
| |
| #[derive(Debug, PartialOrd, Ord, Copy, Clone, PartialEq, Eq, Hash)] |
| pub struct Std { |
| pub target: Interned<String>, |
| pub compiler: Compiler, |
| } |
| |
| impl Step for Std { |
| type Output = (); |
| const DEFAULT: bool = true; |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.all_krates("test") |
| } |
| |
| fn make_run(run: RunConfig<'_>) { |
| run.builder.ensure(Std { |
| compiler: run.builder.compiler(run.builder.top_stage, run.host), |
| target: run.target, |
| }); |
| } |
| |
| /// Builds the standard library. |
| /// |
| /// This will build the standard library for a particular stage of the build |
| /// using the `compiler` targeting the `target` architecture. The artifacts |
| /// created will also be linked into the sysroot directory. |
| fn run(self, builder: &Builder<'_>) { |
| let target = self.target; |
| let compiler = self.compiler; |
| |
| if builder.config.keep_stage.contains(&compiler.stage) { |
| builder.info("Warning: Using a potentially old libstd. This may not behave well."); |
| builder.ensure(StdLink { compiler, target_compiler: compiler, target }); |
| return; |
| } |
| |
| let mut target_deps = builder.ensure(StartupObjects { compiler, target }); |
| |
| let compiler_to_use = builder.compiler_for(compiler.stage, compiler.host, target); |
| if compiler_to_use != compiler { |
| builder.ensure(Std { compiler: compiler_to_use, target }); |
| builder.info(&format!("Uplifting stage1 std ({} -> {})", compiler_to_use.host, target)); |
| |
| // Even if we're not building std this stage, the new sysroot must |
| // still contain the third party objects needed by various targets. |
| copy_third_party_objects(builder, &compiler, target); |
| copy_self_contained_objects(builder, &compiler, target); |
| |
| builder.ensure(StdLink { |
| compiler: compiler_to_use, |
| target_compiler: compiler, |
| target, |
| }); |
| return; |
| } |
| |
| target_deps.extend(copy_third_party_objects(builder, &compiler, target)); |
| target_deps.extend(copy_self_contained_objects(builder, &compiler, target)); |
| |
| let mut cargo = builder.cargo(compiler, Mode::Std, SourceType::InTree, target, "build"); |
| std_cargo(builder, target, compiler.stage, &mut cargo); |
| |
| builder.info(&format!( |
| "Building stage{} std artifacts ({} -> {})", |
| compiler.stage, &compiler.host, target |
| )); |
| run_cargo( |
| builder, |
| cargo, |
| vec![], |
| &libstd_stamp(builder, compiler, target), |
| target_deps, |
| false, |
| ); |
| |
| builder.ensure(StdLink { |
| compiler: builder.compiler(compiler.stage, builder.config.build), |
| target_compiler: compiler, |
| target, |
| }); |
| } |
| } |
| |
| fn copy_and_stamp( |
| builder: &Builder<'_>, |
| libdir: &Path, |
| sourcedir: &Path, |
| name: &str, |
| target_deps: &mut Vec<(PathBuf, DependencyType)>, |
| dependency_type: DependencyType, |
| ) { |
| let target = libdir.join(name); |
| builder.copy(&sourcedir.join(name), &target); |
| |
| target_deps.push((target, dependency_type)); |
| } |
| |
| /// Copies third party objects needed by various targets. |
| fn copy_third_party_objects( |
| builder: &Builder<'_>, |
| compiler: &Compiler, |
| target: Interned<String>, |
| ) -> Vec<(PathBuf, DependencyType)> { |
| let mut target_deps = vec![]; |
| |
| // FIXME: remove this in 2021 |
| if target == "x86_64-fortanix-unknown-sgx" { |
| if env::var_os("X86_FORTANIX_SGX_LIBS").is_some() { |
| builder.info("Warning: X86_FORTANIX_SGX_LIBS environment variable is ignored, libunwind is now compiled as part of rustbuild"); |
| } |
| } |
| |
| if builder.config.sanitizers && compiler.stage != 0 { |
| // The sanitizers are only copied in stage1 or above, |
| // to avoid creating dependency on LLVM. |
| target_deps.extend( |
| copy_sanitizers(builder, &compiler, target) |
| .into_iter() |
| .map(|d| (d, DependencyType::Target)), |
| ); |
| } |
| |
| target_deps |
| } |
| |
| /// Copies third party objects needed by various targets for self-contained linkage. |
| fn copy_self_contained_objects( |
| builder: &Builder<'_>, |
| compiler: &Compiler, |
| target: Interned<String>, |
| ) -> Vec<(PathBuf, DependencyType)> { |
| // cfg(bootstrap) |
| // Remove when upgrading bootstrap compiler. |
| let libdir_self_contained = if compiler.stage == 0 { |
| builder.sysroot_libdir(*compiler, target).to_path_buf() |
| } else { |
| builder.sysroot_libdir(*compiler, target).join("self-contained") |
| }; |
| t!(fs::create_dir_all(&libdir_self_contained)); |
| let mut target_deps = vec![]; |
| |
| // Copies the CRT objects. |
| // |
| // rustc historically provides a more self-contained installation for musl targets |
| // not requiring the presence of a native musl toolchain. For example, it can fall back |
| // to using gcc from a glibc-targeting toolchain for linking. |
| // To do that we have to distribute musl startup objects as a part of Rust toolchain |
| // and link with them manually in the self-contained mode. |
| if target.contains("musl") { |
| let srcdir = builder.musl_libdir(target).unwrap(); |
| for &obj in &["crt1.o", "Scrt1.o", "rcrt1.o", "crti.o", "crtn.o"] { |
| copy_and_stamp( |
| builder, |
| &libdir_self_contained, |
| &srcdir, |
| obj, |
| &mut target_deps, |
| DependencyType::TargetSelfContained, |
| ); |
| } |
| } else if target.ends_with("-wasi") { |
| let srcdir = builder.wasi_root(target).unwrap().join("lib/wasm32-wasi"); |
| copy_and_stamp( |
| builder, |
| &libdir_self_contained, |
| &srcdir, |
| "crt1.o", |
| &mut target_deps, |
| DependencyType::TargetSelfContained, |
| ); |
| } else if target.contains("windows-gnu") { |
| for obj in ["crt2.o", "dllcrt2.o"].iter() { |
| let src = compiler_file(builder, builder.cc(target), target, obj); |
| let target = libdir_self_contained.join(obj); |
| builder.copy(&src, &target); |
| target_deps.push((target, DependencyType::TargetSelfContained)); |
| } |
| } |
| |
| target_deps |
| } |
| |
| /// Configure cargo to compile the standard library, adding appropriate env vars |
| /// and such. |
| pub fn std_cargo(builder: &Builder<'_>, target: Interned<String>, stage: u32, cargo: &mut Cargo) { |
| if let Some(target) = env::var_os("MACOSX_STD_DEPLOYMENT_TARGET") { |
| cargo.env("MACOSX_DEPLOYMENT_TARGET", target); |
| } |
| |
| // Determine if we're going to compile in optimized C intrinsics to |
| // the `compiler-builtins` crate. These intrinsics live in LLVM's |
| // `compiler-rt` repository, but our `src/llvm-project` submodule isn't |
| // always checked out, so we need to conditionally look for this. (e.g. if |
| // an external LLVM is used we skip the LLVM submodule checkout). |
| // |
| // Note that this shouldn't affect the correctness of `compiler-builtins`, |
| // but only its speed. Some intrinsics in C haven't been translated to Rust |
| // yet but that's pretty rare. Other intrinsics have optimized |
| // implementations in C which have only had slower versions ported to Rust, |
| // so we favor the C version where we can, but it's not critical. |
| // |
| // If `compiler-rt` is available ensure that the `c` feature of the |
| // `compiler-builtins` crate is enabled and it's configured to learn where |
| // `compiler-rt` is located. |
| let compiler_builtins_root = builder.src.join("src/llvm-project/compiler-rt"); |
| let compiler_builtins_c_feature = if compiler_builtins_root.exists() { |
| // Note that `libprofiler_builtins/build.rs` also computes this so if |
| // you're changing something here please also change that. |
| cargo.env("RUST_COMPILER_RT_ROOT", &compiler_builtins_root); |
| " compiler-builtins-c".to_string() |
| } else { |
| String::new() |
| }; |
| |
| if builder.no_std(target) == Some(true) { |
| let mut features = "compiler-builtins-mem".to_string(); |
| features.push_str(&compiler_builtins_c_feature); |
| |
| // for no-std targets we only compile a few no_std crates |
| cargo |
| .args(&["-p", "alloc"]) |
| .arg("--manifest-path") |
| .arg(builder.src.join("src/liballoc/Cargo.toml")) |
| .arg("--features") |
| .arg("compiler-builtins-mem compiler-builtins-c"); |
| } else { |
| let mut features = builder.std_features(); |
| features.push_str(&compiler_builtins_c_feature); |
| |
| cargo |
| .arg("--features") |
| .arg(features) |
| .arg("--manifest-path") |
| .arg(builder.src.join("src/libtest/Cargo.toml")); |
| |
| // Help the libc crate compile by assisting it in finding various |
| // sysroot native libraries. |
| if target.contains("musl") { |
| if let Some(p) = builder.musl_libdir(target) { |
| let root = format!("native={}", p.to_str().unwrap()); |
| cargo.rustflag("-L").rustflag(&root); |
| } |
| } |
| |
| if target.ends_with("-wasi") { |
| if let Some(p) = builder.wasi_root(target) { |
| let root = format!("native={}/lib/wasm32-wasi", p.to_str().unwrap()); |
| cargo.rustflag("-L").rustflag(&root); |
| } |
| } |
| } |
| |
| // By default, rustc uses `-Cembed-bitcode=yes`, and Cargo overrides that |
| // with `-Cembed-bitcode=no` for non-LTO builds. However, libstd must be |
| // built with bitcode so that the produced rlibs can be used for both LTO |
| // builds (which use bitcode) and non-LTO builds (which use object code). |
| // So we override the override here! |
| // |
| // But we don't bother for the stage 0 compiler because it's never used |
| // with LTO. |
| if stage >= 1 { |
| cargo.rustflag("-Cembed-bitcode=yes"); |
| } |
| |
| // By default, rustc does not include unwind tables unless they are required |
| // for a particular target. They are not required by RISC-V targets, but |
| // compiling the standard library with them means that users can get |
| // backtraces without having to recompile the standard library themselves. |
| // |
| // This choice was discussed in https://github.com/rust-lang/rust/pull/69890 |
| if target.contains("riscv") { |
| cargo.rustflag("-Cforce-unwind-tables=yes"); |
| } |
| } |
| |
| #[derive(Debug, Copy, Clone, PartialEq, Eq, Hash)] |
| struct StdLink { |
| pub compiler: Compiler, |
| pub target_compiler: Compiler, |
| pub target: Interned<String>, |
| } |
| |
| impl Step for StdLink { |
| type Output = (); |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.never() |
| } |
| |
| /// Link all libstd rlibs/dylibs into the sysroot location. |
| /// |
| /// Links those artifacts generated by `compiler` to the `stage` compiler's |
| /// sysroot for the specified `host` and `target`. |
| /// |
| /// Note that this assumes that `compiler` has already generated the libstd |
| /// libraries for `target`, and this method will find them in the relevant |
| /// output directory. |
| fn run(self, builder: &Builder<'_>) { |
| let compiler = self.compiler; |
| let target_compiler = self.target_compiler; |
| let target = self.target; |
| builder.info(&format!( |
| "Copying stage{} std from stage{} ({} -> {} / {})", |
| target_compiler.stage, compiler.stage, &compiler.host, target_compiler.host, target |
| )); |
| let libdir = builder.sysroot_libdir(target_compiler, target); |
| let hostdir = builder.sysroot_libdir(target_compiler, compiler.host); |
| add_to_sysroot(builder, &libdir, &hostdir, &libstd_stamp(builder, compiler, target)); |
| } |
| } |
| |
| /// Copies sanitizer runtime libraries into target libdir. |
| fn copy_sanitizers( |
| builder: &Builder<'_>, |
| compiler: &Compiler, |
| target: Interned<String>, |
| ) -> Vec<PathBuf> { |
| let runtimes: Vec<native::SanitizerRuntime> = builder.ensure(native::Sanitizers { target }); |
| |
| if builder.config.dry_run { |
| return Vec::new(); |
| } |
| |
| let mut target_deps = Vec::new(); |
| let libdir = builder.sysroot_libdir(*compiler, target); |
| |
| for runtime in &runtimes { |
| let dst = libdir.join(&runtime.name); |
| builder.copy(&runtime.path, &dst); |
| |
| if target == "x86_64-apple-darwin" { |
| // Update the library install name reflect the fact it has been renamed. |
| let status = Command::new("install_name_tool") |
| .arg("-id") |
| .arg(format!("@rpath/{}", runtime.name)) |
| .arg(&dst) |
| .status() |
| .expect("failed to execute `install_name_tool`"); |
| assert!(status.success()); |
| } |
| |
| target_deps.push(dst); |
| } |
| |
| target_deps |
| } |
| |
| #[derive(Debug, Copy, Clone, PartialEq, Eq, Hash)] |
| pub struct StartupObjects { |
| pub compiler: Compiler, |
| pub target: Interned<String>, |
| } |
| |
| impl Step for StartupObjects { |
| type Output = Vec<(PathBuf, DependencyType)>; |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.path("src/rtstartup") |
| } |
| |
| fn make_run(run: RunConfig<'_>) { |
| run.builder.ensure(StartupObjects { |
| compiler: run.builder.compiler(run.builder.top_stage, run.host), |
| target: run.target, |
| }); |
| } |
| |
| /// Builds and prepare startup objects like rsbegin.o and rsend.o |
| /// |
| /// These are primarily used on Windows right now for linking executables/dlls. |
| /// They don't require any library support as they're just plain old object |
| /// files, so we just use the nightly snapshot compiler to always build them (as |
| /// no other compilers are guaranteed to be available). |
| fn run(self, builder: &Builder<'_>) -> Vec<(PathBuf, DependencyType)> { |
| let for_compiler = self.compiler; |
| let target = self.target; |
| if !target.contains("windows-gnu") { |
| return vec![]; |
| } |
| |
| let mut target_deps = vec![]; |
| |
| let src_dir = &builder.src.join("src/rtstartup"); |
| let dst_dir = &builder.native_dir(target).join("rtstartup"); |
| let sysroot_dir = &builder.sysroot_libdir(for_compiler, target); |
| t!(fs::create_dir_all(dst_dir)); |
| |
| for file in &["rsbegin", "rsend"] { |
| let src_file = &src_dir.join(file.to_string() + ".rs"); |
| let dst_file = &dst_dir.join(file.to_string() + ".o"); |
| if !up_to_date(src_file, dst_file) { |
| let mut cmd = Command::new(&builder.initial_rustc); |
| builder.run( |
| cmd.env("RUSTC_BOOTSTRAP", "1") |
| .arg("--cfg") |
| .arg("bootstrap") |
| .arg("--target") |
| .arg(target) |
| .arg("--emit=obj") |
| .arg("-o") |
| .arg(dst_file) |
| .arg(src_file), |
| ); |
| } |
| |
| let target = sysroot_dir.join((*file).to_string() + ".o"); |
| builder.copy(dst_file, &target); |
| target_deps.push((target, DependencyType::Target)); |
| } |
| |
| target_deps |
| } |
| } |
| |
| #[derive(Debug, PartialOrd, Ord, Copy, Clone, PartialEq, Eq, Hash)] |
| pub struct Rustc { |
| pub target: Interned<String>, |
| pub compiler: Compiler, |
| } |
| |
| impl Step for Rustc { |
| type Output = (); |
| const ONLY_HOSTS: bool = true; |
| const DEFAULT: bool = true; |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.all_krates("rustc-main") |
| } |
| |
| fn make_run(run: RunConfig<'_>) { |
| run.builder.ensure(Rustc { |
| compiler: run.builder.compiler(run.builder.top_stage, run.host), |
| target: run.target, |
| }); |
| } |
| |
| /// Builds the compiler. |
| /// |
| /// This will build the compiler for a particular stage of the build using |
| /// the `compiler` targeting the `target` architecture. The artifacts |
| /// created will also be linked into the sysroot directory. |
| fn run(self, builder: &Builder<'_>) { |
| let compiler = self.compiler; |
| let target = self.target; |
| |
| builder.ensure(Std { compiler, target }); |
| |
| if builder.config.keep_stage.contains(&compiler.stage) { |
| builder.info("Warning: Using a potentially old librustc. This may not behave well."); |
| builder.ensure(RustcLink { compiler, target_compiler: compiler, target }); |
| return; |
| } |
| |
| let compiler_to_use = builder.compiler_for(compiler.stage, compiler.host, target); |
| if compiler_to_use != compiler { |
| builder.ensure(Rustc { compiler: compiler_to_use, target }); |
| builder |
| .info(&format!("Uplifting stage1 rustc ({} -> {})", builder.config.build, target)); |
| builder.ensure(RustcLink { |
| compiler: compiler_to_use, |
| target_compiler: compiler, |
| target, |
| }); |
| return; |
| } |
| |
| // Ensure that build scripts and proc macros have a std / libproc_macro to link against. |
| builder.ensure(Std { |
| compiler: builder.compiler(self.compiler.stage, builder.config.build), |
| target: builder.config.build, |
| }); |
| |
| let mut cargo = builder.cargo(compiler, Mode::Rustc, SourceType::InTree, target, "build"); |
| rustc_cargo(builder, &mut cargo, target); |
| |
| builder.info(&format!( |
| "Building stage{} compiler artifacts ({} -> {})", |
| compiler.stage, &compiler.host, target |
| )); |
| run_cargo( |
| builder, |
| cargo, |
| vec![], |
| &librustc_stamp(builder, compiler, target), |
| vec![], |
| false, |
| ); |
| |
| builder.ensure(RustcLink { |
| compiler: builder.compiler(compiler.stage, builder.config.build), |
| target_compiler: compiler, |
| target, |
| }); |
| } |
| } |
| |
| pub fn rustc_cargo(builder: &Builder<'_>, cargo: &mut Cargo, target: Interned<String>) { |
| cargo |
| .arg("--features") |
| .arg(builder.rustc_features()) |
| .arg("--manifest-path") |
| .arg(builder.src.join("src/rustc/Cargo.toml")); |
| rustc_cargo_env(builder, cargo, target); |
| } |
| |
| pub fn rustc_cargo_env(builder: &Builder<'_>, cargo: &mut Cargo, target: Interned<String>) { |
| // Set some configuration variables picked up by build scripts and |
| // the compiler alike |
| cargo |
| .env("CFG_RELEASE", builder.rust_release()) |
| .env("CFG_RELEASE_CHANNEL", &builder.config.channel) |
| .env("CFG_VERSION", builder.rust_version()) |
| .env("CFG_PREFIX", builder.config.prefix.clone().unwrap_or_default()); |
| |
| let libdir_relative = builder.config.libdir_relative().unwrap_or_else(|| Path::new("lib")); |
| cargo.env("CFG_LIBDIR_RELATIVE", libdir_relative); |
| |
| if let Some(ref ver_date) = builder.rust_info.commit_date() { |
| cargo.env("CFG_VER_DATE", ver_date); |
| } |
| if let Some(ref ver_hash) = builder.rust_info.sha() { |
| cargo.env("CFG_VER_HASH", ver_hash); |
| } |
| if !builder.unstable_features() { |
| cargo.env("CFG_DISABLE_UNSTABLE_FEATURES", "1"); |
| } |
| if let Some(ref s) = builder.config.rustc_default_linker { |
| cargo.env("CFG_DEFAULT_LINKER", s); |
| } |
| if builder.config.rustc_parallel { |
| cargo.rustflag("--cfg=parallel_compiler"); |
| } |
| if builder.config.rust_verify_llvm_ir { |
| cargo.env("RUSTC_VERIFY_LLVM_IR", "1"); |
| } |
| |
| // Pass down configuration from the LLVM build into the build of |
| // librustc_llvm and librustc_codegen_llvm. |
| // |
| // Note that this is disabled if LLVM itself is disabled or we're in a check |
| // build. If we are in a check build we still go ahead here presuming we've |
| // detected that LLVM is alreay built and good to go which helps prevent |
| // busting caches (e.g. like #71152). |
| if builder.config.llvm_enabled() |
| && (builder.kind != Kind::Check |
| || crate::native::prebuilt_llvm_config(builder, target).is_ok()) |
| { |
| if builder.is_rust_llvm(target) { |
| cargo.env("LLVM_RUSTLLVM", "1"); |
| } |
| let llvm_config = builder.ensure(native::Llvm { target }); |
| cargo.env("LLVM_CONFIG", &llvm_config); |
| let target_config = builder.config.target_config.get(&target); |
| if let Some(s) = target_config.and_then(|c| c.llvm_config.as_ref()) { |
| cargo.env("CFG_LLVM_ROOT", s); |
| } |
| // Some LLVM linker flags (-L and -l) may be needed to link librustc_llvm. |
| if let Some(ref s) = builder.config.llvm_ldflags { |
| cargo.env("LLVM_LINKER_FLAGS", s); |
| } |
| // Building with a static libstdc++ is only supported on linux right now, |
| // not for MSVC or macOS |
| if builder.config.llvm_static_stdcpp |
| && !target.contains("freebsd") |
| && !target.contains("msvc") |
| && !target.contains("apple") |
| { |
| let file = compiler_file(builder, builder.cxx(target).unwrap(), target, "libstdc++.a"); |
| cargo.env("LLVM_STATIC_STDCPP", file); |
| } |
| if builder.config.llvm_link_shared || builder.config.llvm_thin_lto { |
| cargo.env("LLVM_LINK_SHARED", "1"); |
| } |
| if builder.config.llvm_use_libcxx { |
| cargo.env("LLVM_USE_LIBCXX", "1"); |
| } |
| if builder.config.llvm_optimize && !builder.config.llvm_release_debuginfo { |
| cargo.env("LLVM_NDEBUG", "1"); |
| } |
| } |
| } |
| |
| #[derive(Debug, Copy, Clone, PartialEq, Eq, Hash)] |
| struct RustcLink { |
| pub compiler: Compiler, |
| pub target_compiler: Compiler, |
| pub target: Interned<String>, |
| } |
| |
| impl Step for RustcLink { |
| type Output = (); |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.never() |
| } |
| |
| /// Same as `std_link`, only for librustc |
| fn run(self, builder: &Builder<'_>) { |
| let compiler = self.compiler; |
| let target_compiler = self.target_compiler; |
| let target = self.target; |
| builder.info(&format!( |
| "Copying stage{} rustc from stage{} ({} -> {} / {})", |
| target_compiler.stage, compiler.stage, &compiler.host, target_compiler.host, target |
| )); |
| add_to_sysroot( |
| builder, |
| &builder.sysroot_libdir(target_compiler, target), |
| &builder.sysroot_libdir(target_compiler, compiler.host), |
| &librustc_stamp(builder, compiler, target), |
| ); |
| } |
| } |
| |
| /// Cargo's output path for the standard library in a given stage, compiled |
| /// by a particular compiler for the specified target. |
| pub fn libstd_stamp( |
| builder: &Builder<'_>, |
| compiler: Compiler, |
| target: Interned<String>, |
| ) -> PathBuf { |
| builder.cargo_out(compiler, Mode::Std, target).join(".libstd.stamp") |
| } |
| |
| /// Cargo's output path for librustc in a given stage, compiled by a particular |
| /// compiler for the specified target. |
| pub fn librustc_stamp( |
| builder: &Builder<'_>, |
| compiler: Compiler, |
| target: Interned<String>, |
| ) -> PathBuf { |
| builder.cargo_out(compiler, Mode::Rustc, target).join(".librustc.stamp") |
| } |
| |
| pub fn compiler_file( |
| builder: &Builder<'_>, |
| compiler: &Path, |
| target: Interned<String>, |
| file: &str, |
| ) -> PathBuf { |
| let mut cmd = Command::new(compiler); |
| cmd.args(builder.cflags(target, GitRepo::Rustc)); |
| cmd.arg(format!("-print-file-name={}", file)); |
| let out = output(&mut cmd); |
| PathBuf::from(out.trim()) |
| } |
| |
| #[derive(Debug, Copy, Clone, PartialEq, Eq, Hash)] |
| pub struct Sysroot { |
| pub compiler: Compiler, |
| } |
| |
| impl Step for Sysroot { |
| type Output = Interned<PathBuf>; |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.never() |
| } |
| |
| /// Returns the sysroot for the `compiler` specified that *this build system |
| /// generates*. |
| /// |
| /// That is, the sysroot for the stage0 compiler is not what the compiler |
| /// thinks it is by default, but it's the same as the default for stages |
| /// 1-3. |
| fn run(self, builder: &Builder<'_>) -> Interned<PathBuf> { |
| let compiler = self.compiler; |
| let sysroot = if compiler.stage == 0 { |
| builder.out.join(&compiler.host).join("stage0-sysroot") |
| } else { |
| builder.out.join(&compiler.host).join(format!("stage{}", compiler.stage)) |
| }; |
| let _ = fs::remove_dir_all(&sysroot); |
| t!(fs::create_dir_all(&sysroot)); |
| |
| // Symlink the source root into the same location inside the sysroot, |
| // where `rust-src` component would go (`$sysroot/lib/rustlib/src/rust`), |
| // so that any tools relying on `rust-src` also work for local builds, |
| // and also for translating the virtual `/rustc/$hash` back to the real |
| // directory (for running tests with `rust.remap-debuginfo = true`). |
| let sysroot_lib_rustlib_src = sysroot.join("lib/rustlib/src"); |
| t!(fs::create_dir_all(&sysroot_lib_rustlib_src)); |
| let sysroot_lib_rustlib_src_rust = sysroot_lib_rustlib_src.join("rust"); |
| if let Err(e) = symlink_dir(&builder.config, &builder.src, &sysroot_lib_rustlib_src_rust) { |
| eprintln!( |
| "warning: creating symbolic link `{}` to `{}` failed with {}", |
| sysroot_lib_rustlib_src_rust.display(), |
| builder.src.display(), |
| e, |
| ); |
| if builder.config.rust_remap_debuginfo { |
| eprintln!( |
| "warning: some `src/test/ui` tests will fail when lacking `{}`", |
| sysroot_lib_rustlib_src_rust.display(), |
| ); |
| } |
| } |
| |
| INTERNER.intern_path(sysroot) |
| } |
| } |
| |
| #[derive(Debug, Copy, PartialOrd, Ord, Clone, PartialEq, Eq, Hash)] |
| pub struct Assemble { |
| /// The compiler which we will produce in this step. Assemble itself will |
| /// take care of ensuring that the necessary prerequisites to do so exist, |
| /// that is, this target can be a stage2 compiler and Assemble will build |
| /// previous stages for you. |
| pub target_compiler: Compiler, |
| } |
| |
| impl Step for Assemble { |
| type Output = Compiler; |
| |
| fn should_run(run: ShouldRun<'_>) -> ShouldRun<'_> { |
| run.never() |
| } |
| |
| /// Prepare a new compiler from the artifacts in `stage` |
| /// |
| /// This will assemble a compiler in `build/$host/stage$stage`. The compiler |
| /// must have been previously produced by the `stage - 1` builder.build |
| /// compiler. |
| fn run(self, builder: &Builder<'_>) -> Compiler { |
| let target_compiler = self.target_compiler; |
| |
| if target_compiler.stage == 0 { |
| assert_eq!( |
| builder.config.build, target_compiler.host, |
| "Cannot obtain compiler for non-native build triple at stage 0" |
| ); |
| // The stage 0 compiler for the build triple is always pre-built. |
| return target_compiler; |
| } |
| |
| // Get the compiler that we'll use to bootstrap ourselves. |
| // |
| // Note that this is where the recursive nature of the bootstrap |
| // happens, as this will request the previous stage's compiler on |
| // downwards to stage 0. |
| // |
| // Also note that we're building a compiler for the host platform. We |
| // only assume that we can run `build` artifacts, which means that to |
| // produce some other architecture compiler we need to start from |
| // `build` to get there. |
| // |
| // FIXME: Perhaps we should download those libraries? |
| // It would make builds faster... |
| // |
| // FIXME: It may be faster if we build just a stage 1 compiler and then |
| // use that to bootstrap this compiler forward. |
| let build_compiler = builder.compiler(target_compiler.stage - 1, builder.config.build); |
| |
| // Build the libraries for this compiler to link to (i.e., the libraries |
| // it uses at runtime). NOTE: Crates the target compiler compiles don't |
| // link to these. (FIXME: Is that correct? It seems to be correct most |
| // of the time but I think we do link to these for stage2/bin compilers |
| // when not performing a full bootstrap). |
| builder.ensure(Rustc { compiler: build_compiler, target: target_compiler.host }); |
| |
| let lld_install = if builder.config.lld_enabled { |
| Some(builder.ensure(native::Lld { target: target_compiler.host })) |
| } else { |
| None |
| }; |
| |
| let stage = target_compiler.stage; |
| let host = target_compiler.host; |
| builder.info(&format!("Assembling stage{} compiler ({})", stage, host)); |
| |
| // Link in all dylibs to the libdir |
| let sysroot = builder.sysroot(target_compiler); |
| let rustc_libdir = builder.rustc_libdir(target_compiler); |
| t!(fs::create_dir_all(&rustc_libdir)); |
| let src_libdir = builder.sysroot_libdir(build_compiler, host); |
| for f in builder.read_dir(&src_libdir) { |
| let filename = f.file_name().into_string().unwrap(); |
| if is_dylib(&filename) { |
| builder.copy(&f.path(), &rustc_libdir.join(&filename)); |
| } |
| } |
| |
| let libdir = builder.sysroot_libdir(target_compiler, target_compiler.host); |
| if let Some(lld_install) = lld_install { |
| let src_exe = exe("lld", &target_compiler.host); |
| let dst_exe = exe("rust-lld", &target_compiler.host); |
| // we prepend this bin directory to the user PATH when linking Rust binaries. To |
| // avoid shadowing the system LLD we rename the LLD we provide to `rust-lld`. |
| let dst = libdir.parent().unwrap().join("bin"); |
| t!(fs::create_dir_all(&dst)); |
| builder.copy(&lld_install.join("bin").join(&src_exe), &dst.join(&dst_exe)); |
| } |
| |
| // Ensure that `libLLVM.so` ends up in the newly build compiler directory, |
| // so that it can be found when the newly built `rustc` is run. |
| dist::maybe_install_llvm_runtime(builder, target_compiler.host, &sysroot); |
| dist::maybe_install_llvm_target(builder, target_compiler.host, &sysroot); |
| |
| // Link the compiler binary itself into place |
| let out_dir = builder.cargo_out(build_compiler, Mode::Rustc, host); |
| let rustc = out_dir.join(exe("rustc_binary", &*host)); |
| let bindir = sysroot.join("bin"); |
| t!(fs::create_dir_all(&bindir)); |
| let compiler = builder.rustc(target_compiler); |
| builder.copy(&rustc, &compiler); |
| |
| target_compiler |
| } |
| } |
| |
| /// Link some files into a rustc sysroot. |
| /// |
| /// For a particular stage this will link the file listed in `stamp` into the |
| /// `sysroot_dst` provided. |
| pub fn add_to_sysroot( |
| builder: &Builder<'_>, |
| sysroot_dst: &Path, |
| sysroot_host_dst: &Path, |
| stamp: &Path, |
| ) { |
| let self_contained_dst = &sysroot_dst.join("self-contained"); |
| t!(fs::create_dir_all(&sysroot_dst)); |
| t!(fs::create_dir_all(&sysroot_host_dst)); |
| t!(fs::create_dir_all(&self_contained_dst)); |
| for (path, dependency_type) in builder.read_stamp_file(stamp) { |
| let dst = match dependency_type { |
| DependencyType::Host => sysroot_host_dst, |
| DependencyType::Target => sysroot_dst, |
| DependencyType::TargetSelfContained => self_contained_dst, |
| }; |
| builder.copy(&path, &dst.join(path.file_name().unwrap())); |
| } |
| } |
| |
| pub fn run_cargo( |
| builder: &Builder<'_>, |
| cargo: Cargo, |
| tail_args: Vec<String>, |
| stamp: &Path, |
| additional_target_deps: Vec<(PathBuf, DependencyType)>, |
| is_check: bool, |
| ) -> Vec<PathBuf> { |
| if builder.config.dry_run { |
| return Vec::new(); |
| } |
| |
| // `target_root_dir` looks like $dir/$target/release |
| let target_root_dir = stamp.parent().unwrap(); |
| // `target_deps_dir` looks like $dir/$target/release/deps |
| let target_deps_dir = target_root_dir.join("deps"); |
| // `host_root_dir` looks like $dir/release |
| let host_root_dir = target_root_dir |
| .parent() |
| .unwrap() // chop off `release` |
| .parent() |
| .unwrap() // chop off `$target` |
| .join(target_root_dir.file_name().unwrap()); |
| |
| // Spawn Cargo slurping up its JSON output. We'll start building up the |
| // `deps` array of all files it generated along with a `toplevel` array of |
| // files we need to probe for later. |
| let mut deps = Vec::new(); |
| let mut toplevel = Vec::new(); |
| let ok = stream_cargo(builder, cargo, tail_args, &mut |msg| { |
| let (filenames, crate_types) = match msg { |
| CargoMessage::CompilerArtifact { |
| filenames, |
| target: CargoTarget { crate_types }, |
| .. |
| } => (filenames, crate_types), |
| _ => return, |
| }; |
| for filename in filenames { |
| // Skip files like executables |
| if !(filename.ends_with(".rlib") |
| || filename.ends_with(".lib") |
| || filename.ends_with(".a") |
| || is_dylib(&filename) |
| || (is_check && filename.ends_with(".rmeta"))) |
| { |
| continue; |
| } |
| |
| let filename = Path::new(&*filename); |
| |
| // If this was an output file in the "host dir" we don't actually |
| // worry about it, it's not relevant for us |
| if filename.starts_with(&host_root_dir) { |
| // Unless it's a proc macro used in the compiler |
| if crate_types.iter().any(|t| t == "proc-macro") { |
| deps.push((filename.to_path_buf(), DependencyType::Host)); |
| } |
| continue; |
| } |
| |
| // If this was output in the `deps` dir then this is a precise file |
| // name (hash included) so we start tracking it. |
| if filename.starts_with(&target_deps_dir) { |
| deps.push((filename.to_path_buf(), DependencyType::Target)); |
| continue; |
| } |
| |
| // Otherwise this was a "top level artifact" which right now doesn't |
| // have a hash in the name, but there's a version of this file in |
| // the `deps` folder which *does* have a hash in the name. That's |
| // the one we'll want to we'll probe for it later. |
| // |
| // We do not use `Path::file_stem` or `Path::extension` here, |
| // because some generated files may have multiple extensions e.g. |
| // `std-<hash>.dll.lib` on Windows. The aforementioned methods only |
| // split the file name by the last extension (`.lib`) while we need |
| // to split by all extensions (`.dll.lib`). |
| let expected_len = t!(filename.metadata()).len(); |
| let filename = filename.file_name().unwrap().to_str().unwrap(); |
| let mut parts = filename.splitn(2, '.'); |
| let file_stem = parts.next().unwrap().to_owned(); |
| let extension = parts.next().unwrap().to_owned(); |
| |
| toplevel.push((file_stem, extension, expected_len)); |
| } |
| }); |
| |
| if !ok { |
| exit(1); |
| } |
| |
| // Ok now we need to actually find all the files listed in `toplevel`. We've |
| // got a list of prefix/extensions and we basically just need to find the |
| // most recent file in the `deps` folder corresponding to each one. |
| let contents = t!(target_deps_dir.read_dir()) |
| .map(|e| t!(e)) |
| .map(|e| (e.path(), e.file_name().into_string().unwrap(), t!(e.metadata()))) |
| .collect::<Vec<_>>(); |
| for (prefix, extension, expected_len) in toplevel { |
| let candidates = contents.iter().filter(|&&(_, ref filename, ref meta)| { |
| meta.len() == expected_len |
| && filename |
| .strip_prefix(&prefix[..]) |
| .map(|s| s.starts_with('-') && s.ends_with(&extension[..])) |
| .unwrap_or(false) |
| }); |
| let max = candidates |
| .max_by_key(|&&(_, _, ref metadata)| FileTime::from_last_modification_time(metadata)); |
| let path_to_add = match max { |
| Some(triple) => triple.0.to_str().unwrap(), |
| None => panic!("no output generated for {:?} {:?}", prefix, extension), |
| }; |
| if is_dylib(path_to_add) { |
| let candidate = format!("{}.lib", path_to_add); |
| let candidate = PathBuf::from(candidate); |
| if candidate.exists() { |
| deps.push((candidate, DependencyType::Target)); |
| } |
| } |
| deps.push((path_to_add.into(), DependencyType::Target)); |
| } |
| |
| deps.extend(additional_target_deps); |
| deps.sort(); |
| let mut new_contents = Vec::new(); |
| for (dep, dependency_type) in deps.iter() { |
| new_contents.extend(match *dependency_type { |
| DependencyType::Host => b"h", |
| DependencyType::Target => b"t", |
| DependencyType::TargetSelfContained => b"s", |
| }); |
| new_contents.extend(dep.to_str().unwrap().as_bytes()); |
| new_contents.extend(b"\0"); |
| } |
| t!(fs::write(&stamp, &new_contents)); |
| deps.into_iter().map(|(d, _)| d).collect() |
| } |
| |
| pub fn stream_cargo( |
| builder: &Builder<'_>, |
| cargo: Cargo, |
| tail_args: Vec<String>, |
| cb: &mut dyn FnMut(CargoMessage<'_>), |
| ) -> bool { |
| let mut cargo = Command::from(cargo); |
| if builder.config.dry_run { |
| return true; |
| } |
| // Instruct Cargo to give us json messages on stdout, critically leaving |
| // stderr as piped so we can get those pretty colors. |
| let mut message_format = if builder.config.json_output { |
| String::from("json") |
| } else { |
| String::from("json-render-diagnostics") |
| }; |
| if let Some(s) = &builder.config.rustc_error_format { |
| message_format.push_str(",json-diagnostic-"); |
| message_format.push_str(s); |
| } |
| cargo.arg("--message-format").arg(message_format).stdout(Stdio::piped()); |
| |
| for arg in tail_args { |
| cargo.arg(arg); |
| } |
| |
| builder.verbose(&format!("running: {:?}", cargo)); |
| let mut child = match cargo.spawn() { |
| Ok(child) => child, |
| Err(e) => panic!("failed to execute command: {:?}\nerror: {}", cargo, e), |
| }; |
| |
| // Spawn Cargo slurping up its JSON output. We'll start building up the |
| // `deps` array of all files it generated along with a `toplevel` array of |
| // files we need to probe for later. |
| let stdout = BufReader::new(child.stdout.take().unwrap()); |
| for line in stdout.lines() { |
| let line = t!(line); |
| match serde_json::from_str::<CargoMessage<'_>>(&line) { |
| Ok(msg) => { |
| if builder.config.json_output { |
| // Forward JSON to stdout. |
| println!("{}", line); |
| } |
| cb(msg) |
| } |
| // If this was informational, just print it out and continue |
| Err(_) => println!("{}", line), |
| } |
| } |
| |
| // Make sure Cargo actually succeeded after we read all of its stdout. |
| let status = t!(child.wait()); |
| if !status.success() { |
| eprintln!( |
| "command did not execute successfully: {:?}\n\ |
| expected success, got: {}", |
| cargo, status |
| ); |
| } |
| status.success() |
| } |
| |
| #[derive(Deserialize)] |
| pub struct CargoTarget<'a> { |
| crate_types: Vec<Cow<'a, str>>, |
| } |
| |
| #[derive(Deserialize)] |
| #[serde(tag = "reason", rename_all = "kebab-case")] |
| pub enum CargoMessage<'a> { |
| CompilerArtifact { |
| package_id: Cow<'a, str>, |
| features: Vec<Cow<'a, str>>, |
| filenames: Vec<Cow<'a, str>>, |
| target: CargoTarget<'a>, |
| }, |
| BuildScriptExecuted { |
| package_id: Cow<'a, str>, |
| }, |
| BuildFinished { |
| success: bool, |
| }, |
| } |
