| environment: |
| SCCACHE_BUCKET: rust-lang-ci-sccache |
| AWS_ACCESS_KEY_ID: AKIAIMX7VLAS3PZAVLUQ |
| AWS_SECRET_ACCESS_KEY: |
| secure: 1UkmbiDd15tWtYbMm5O2Uqm0b0Ur8v1MoSlydxl4ojcroPeerRMlUges0l57py8c |
| SCCACHE_DIGEST: f808afabb4a4eb1d7112bcb3fa6be03b61e93412890c88e177c667eb37f46353d7ec294e559b16f9f4b5e894f2185fe7670a0df15fd064889ecbd80f0c34166c |
| matrix: |
| # 32/64 bit MSVC |
| - MSYS_BITS: 64 |
| RUST_CONFIGURE_ARGS: --build=x86_64-pc-windows-msvc --enable-extended |
| SCRIPT: python x.py test && python x.py dist |
| DEPLOY: 1 |
| - MSYS_BITS: 32 |
| RUST_CONFIGURE_ARGS: --build=i686-pc-windows-msvc --target=i586-pc-windows-msvc --enable-extended |
| SCRIPT: python x.py test --host i686-pc-windows-msvc --target i686-pc-windows-msvc && python x.py dist |
| DEPLOY: 1 |
| |
| # MSVC makefiles |
| - MSYS_BITS: 64 |
| RUST_CONFIGURE_ARGS: --build=x86_64-pc-windows-msvc --disable-rustbuild |
| RUST_CHECK_TARGET: check |
| |
| # MSVC cargotest |
| - MSYS_BITS: 64 |
| NO_VENDOR: 1 |
| RUST_CHECK_TARGET: check-aux |
| RUST_CONFIGURE_ARGS: --build=x86_64-pc-windows-msvc |
| |
| # 32/64-bit MinGW builds. |
| # |
| # The MinGW builds unfortunately have to both download a custom toolchain and |
| # avoid the one installed by AppVeyor by default. Interestingly, though, for |
| # different reasons! |
| # |
| # For 32-bit the installed gcc toolchain on AppVeyor uses the pthread |
| # threading model. This is unfortunately not what we want, and if we compile |
| # with it then there's lots of link errors in the standard library (undefined |
| # references to pthread symbols). |
| # |
| # For 64-bit the installed gcc toolchain is currently 5.3.0 which |
| # unfortunately segfaults on Windows with --enable-llvm-assertions (segfaults |
| # in LLVM). See rust-lang/rust#28445 for more information, but to work around |
| # this we go back in time to 4.9.2 specifically. |
| # |
| # Finally, note that the downloads below are all in the `rust-lang-ci` S3 |
| # bucket, but they cleraly didn't originate there! The downloads originally |
| # came from the mingw-w64 SourceForge download site. Unfortunately |
| # SourceForge is notoriously flaky, so we mirror it on our own infrastructure. |
| # |
| # And as a final point of note, the 32-bit MinGW build using the makefiles do |
| # *not* use debug assertions and llvm assertions. This is because they take |
| # too long on appveyor and this is tested by rustbuild below. |
| - MSYS_BITS: 32 |
| RUST_CONFIGURE_ARGS: --build=i686-pc-windows-gnu --enable-extended |
| SCRIPT: python x.py test && python x.py dist |
| MINGW_URL: https://s3.amazonaws.com/rust-lang-ci |
| MINGW_ARCHIVE: i686-4.9.2-release-win32-dwarf-rt_v4-rev4.7z |
| MINGW_DIR: mingw32 |
| DEPLOY: 1 |
| |
| - MSYS_BITS: 32 |
| RUST_CONFIGURE_ARGS: --build=i686-pc-windows-gnu --disable-rustbuild |
| RUST_CHECK_TARGET: check |
| MINGW_URL: https://s3.amazonaws.com/rust-lang-ci |
| MINGW_ARCHIVE: i686-4.9.2-release-win32-dwarf-rt_v4-rev4.7z |
| MINGW_DIR: mingw32 |
| |
| - MSYS_BITS: 64 |
| SCRIPT: python x.py test && python x.py dist |
| RUST_CONFIGURE_ARGS: --build=x86_64-pc-windows-gnu --enable-extended |
| MINGW_URL: https://s3.amazonaws.com/rust-lang-ci |
| MINGW_ARCHIVE: x86_64-4.9.2-release-win32-seh-rt_v4-rev4.7z |
| MINGW_DIR: mingw64 |
| DEPLOY: 1 |
| |
| matrix: |
| fast_finish: true |
| |
| clone_depth: 1 |
| build: false |
| |
| install: |
| # If we need to download a custom MinGW, do so here and set the path |
| # appropriately. |
| # |
| # Note that this *also* means that we're not using what is typically |
| # /mingw32/bin/python2.7.exe, which is a "correct" python interpreter where |
| # /usr/bin/python2.7.exe is not. To ensure we use the right interpreter we |
| # move `C:\Python27` ahead in PATH and then also make sure the `python2.7.exe` |
| # file exists in there (which it doesn't by default). |
| - if defined MINGW_URL appveyor DownloadFile %MINGW_URL%/%MINGW_ARCHIVE% |
| - if defined MINGW_URL 7z x -y %MINGW_ARCHIVE% > nul |
| - if defined MINGW_URL set PATH=C:\Python27;%CD%\%MINGW_DIR%\bin;C:\msys64\usr\bin;%PATH% |
| - if defined MINGW_URL copy C:\Python27\python.exe C:\Python27\python2.7.exe |
| |
| # Otherwise pull in the MinGW installed on appveyor |
| - if NOT defined MINGW_URL set PATH=C:\msys64\mingw%MSYS_BITS%\bin;C:\msys64\usr\bin;%PATH% |
| |
| # Download and install sccache |
| - appveyor DownloadFile https://api.pub.build.mozilla.org/tooltool/sha512/%SCCACHE_DIGEST% |
| - mv %SCCACHE_DIGEST% sccache.tar.bz2 |
| - 7z x -y sccache.tar.bz2 > nul |
| - 7z x -y sccache.tar > nul |
| - set PATH=%PATH%;%CD%\sccache2 |
| |
| # Install InnoSetup to get `iscc` used to produce installers |
| - choco install -y InnoSetup |
| - set PATH="C:\Program Files (x86)\Inno Setup 5";%PATH% |
| |
| # Help debug some handle issues on AppVeyor |
| - ps: Invoke-WebRequest -Uri https://download.sysinternals.com/files/Handle.zip -OutFile handle.zip |
| - mkdir handle |
| - ps: Expand-Archive handle.zip -dest handle |
| - set PATH=%PATH%;%CD%\handle |
| - handle.exe -accepteula -help |
| |
| test_script: |
| - git submodule update --init |
| - set SRC=. |
| - set NO_CCACHE=1 |
| - sh src/ci/run.sh |
| |
| cache: |
| - "build/i686-pc-windows-gnu/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "build/x86_64-pc-windows-gnu/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "build/i686-pc-windows-msvc/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "build/x86_64-pc-windows-msvc/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "i686-pc-windows-gnu/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "x86_64-pc-windows-gnu/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "i686-pc-windows-msvc/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| - "x86_64-pc-windows-msvc/llvm -> src/rustllvm/llvm-auto-clean-trigger" |
| |
| branches: |
| only: |
| - auto |
| |
| before_deploy: |
| - ps: | |
| New-Item -Path deploy -ItemType directory |
| Remove-Item -Recurse -Force build\dist\doc |
| Get-ChildItem -Path build\dist | Move-Item -Destination deploy |
| Get-ChildItem -Path deploy | Foreach-Object { |
| Push-AppveyorArtifact $_.FullName -FileName ${env:APPVEYOR_REPO_COMMIT}/$_ |
| } |
| |
| deploy: |
| - provider: S3 |
| skip_cleanup: true |
| access_key_id: AKIAIPQVNYF2T3DTYIWQ |
| secret_access_key: |
| secure: +11jsUNFTQ9dq5Ad1i2+PeUJaXluFJ0zIJAXESE1dFT3Kdjku4/eDdgyjgsB6GnV |
| bucket: rust-lang-ci |
| set_public: true |
| region: us-east-1 |
| artifact: /.*/ |
| folder: rustc-builds |
| on: |
| branch: auto |
| DEPLOY: 1 |
| |
| # init: |
| # - ps: iex ((new-object net.webclient).DownloadString('https://raw.githubusercontent.com/appveyor/ci/master/scripts/enable-rdp.ps1')) |
| # on_finish: |
| # - ps: $blockRdp = $true; iex ((new-object net.webclient).DownloadString('https://raw.githubusercontent.com/appveyor/ci/master/scripts/enable-rdp.ps1')) |