| /* |
| * Copyright © 2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include "anv_private.h" |
| |
| #include "genxml/gen_macros.h" |
| #include "genxml/genX_pack.h" |
| |
| #include "common/gen_l3_config.h" |
| #include "common/gen_sample_positions.h" |
| #include "nir/nir_xfb_info.h" |
| #include "vk_util.h" |
| #include "vk_format_info.h" |
| |
| static uint32_t |
| vertex_element_comp_control(enum isl_format format, unsigned comp) |
| { |
| uint8_t bits; |
| switch (comp) { |
| case 0: bits = isl_format_layouts[format].channels.r.bits; break; |
| case 1: bits = isl_format_layouts[format].channels.g.bits; break; |
| case 2: bits = isl_format_layouts[format].channels.b.bits; break; |
| case 3: bits = isl_format_layouts[format].channels.a.bits; break; |
| default: unreachable("Invalid component"); |
| } |
| |
| /* |
| * Take in account hardware restrictions when dealing with 64-bit floats. |
| * |
| * From Broadwell spec, command reference structures, page 586: |
| * "When SourceElementFormat is set to one of the *64*_PASSTHRU formats, |
| * 64-bit components are stored * in the URB without any conversion. In |
| * this case, vertex elements must be written as 128 or 256 bits, with |
| * VFCOMP_STORE_0 being used to pad the output as required. E.g., if |
| * R64_PASSTHRU is used to copy a 64-bit Red component into the URB, |
| * Component 1 must be specified as VFCOMP_STORE_0 (with Components 2,3 |
| * set to VFCOMP_NOSTORE) in order to output a 128-bit vertex element, or |
| * Components 1-3 must be specified as VFCOMP_STORE_0 in order to output |
| * a 256-bit vertex element. Likewise, use of R64G64B64_PASSTHRU requires |
| * Component 3 to be specified as VFCOMP_STORE_0 in order to output a |
| * 256-bit vertex element." |
| */ |
| if (bits) { |
| return VFCOMP_STORE_SRC; |
| } else if (comp >= 2 && |
| !isl_format_layouts[format].channels.b.bits && |
| isl_format_layouts[format].channels.r.type == ISL_RAW) { |
| /* When emitting 64-bit attributes, we need to write either 128 or 256 |
| * bit chunks, using VFCOMP_NOSTORE when not writing the chunk, and |
| * VFCOMP_STORE_0 to pad the written chunk */ |
| return VFCOMP_NOSTORE; |
| } else if (comp < 3 || |
| isl_format_layouts[format].channels.r.type == ISL_RAW) { |
| /* Note we need to pad with value 0, not 1, due hardware restrictions |
| * (see comment above) */ |
| return VFCOMP_STORE_0; |
| } else if (isl_format_layouts[format].channels.r.type == ISL_UINT || |
| isl_format_layouts[format].channels.r.type == ISL_SINT) { |
| assert(comp == 3); |
| return VFCOMP_STORE_1_INT; |
| } else { |
| assert(comp == 3); |
| return VFCOMP_STORE_1_FP; |
| } |
| } |
| |
| static void |
| emit_vertex_input(struct anv_pipeline *pipeline, |
| const VkPipelineVertexInputStateCreateInfo *info) |
| { |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| /* Pull inputs_read out of the VS prog data */ |
| const uint64_t inputs_read = vs_prog_data->inputs_read; |
| const uint64_t double_inputs_read = |
| vs_prog_data->double_inputs_read & inputs_read; |
| assert((inputs_read & ((1 << VERT_ATTRIB_GENERIC0) - 1)) == 0); |
| const uint32_t elements = inputs_read >> VERT_ATTRIB_GENERIC0; |
| const uint32_t elements_double = double_inputs_read >> VERT_ATTRIB_GENERIC0; |
| const bool needs_svgs_elem = vs_prog_data->uses_vertexid || |
| vs_prog_data->uses_instanceid || |
| vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance; |
| |
| uint32_t elem_count = __builtin_popcount(elements) - |
| __builtin_popcount(elements_double) / 2; |
| |
| const uint32_t total_elems = |
| MAX2(1, elem_count + needs_svgs_elem + vs_prog_data->uses_drawid); |
| |
| uint32_t *p; |
| |
| const uint32_t num_dwords = 1 + total_elems * 2; |
| p = anv_batch_emitn(&pipeline->batch, num_dwords, |
| GENX(3DSTATE_VERTEX_ELEMENTS)); |
| if (!p) |
| return; |
| |
| for (uint32_t i = 0; i < total_elems; i++) { |
| /* The SKL docs for VERTEX_ELEMENT_STATE say: |
| * |
| * "All elements must be valid from Element[0] to the last valid |
| * element. (I.e. if Element[2] is valid then Element[1] and |
| * Element[0] must also be valid)." |
| * |
| * The SKL docs for 3D_Vertex_Component_Control say: |
| * |
| * "Don't store this component. (Not valid for Component 0, but can |
| * be used for Component 1-3)." |
| * |
| * So we can't just leave a vertex element blank and hope for the best. |
| * We have to tell the VF hardware to put something in it; so we just |
| * store a bunch of zero. |
| * |
| * TODO: Compact vertex elements so we never end up with holes. |
| */ |
| struct GENX(VERTEX_ELEMENT_STATE) element = { |
| .Valid = true, |
| .Component0Control = VFCOMP_STORE_0, |
| .Component1Control = VFCOMP_STORE_0, |
| .Component2Control = VFCOMP_STORE_0, |
| .Component3Control = VFCOMP_STORE_0, |
| }; |
| GENX(VERTEX_ELEMENT_STATE_pack)(NULL, &p[1 + i * 2], &element); |
| } |
| |
| for (uint32_t i = 0; i < info->vertexAttributeDescriptionCount; i++) { |
| const VkVertexInputAttributeDescription *desc = |
| &info->pVertexAttributeDescriptions[i]; |
| enum isl_format format = anv_get_isl_format(&pipeline->device->info, |
| desc->format, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| VK_IMAGE_TILING_LINEAR); |
| |
| assert(desc->binding < MAX_VBS); |
| |
| if ((elements & (1 << desc->location)) == 0) |
| continue; /* Binding unused */ |
| |
| uint32_t slot = |
| __builtin_popcount(elements & ((1 << desc->location) - 1)) - |
| DIV_ROUND_UP(__builtin_popcount(elements_double & |
| ((1 << desc->location) -1)), 2); |
| |
| struct GENX(VERTEX_ELEMENT_STATE) element = { |
| .VertexBufferIndex = desc->binding, |
| .Valid = true, |
| .SourceElementFormat = format, |
| .EdgeFlagEnable = false, |
| .SourceElementOffset = desc->offset, |
| .Component0Control = vertex_element_comp_control(format, 0), |
| .Component1Control = vertex_element_comp_control(format, 1), |
| .Component2Control = vertex_element_comp_control(format, 2), |
| .Component3Control = vertex_element_comp_control(format, 3), |
| }; |
| GENX(VERTEX_ELEMENT_STATE_pack)(NULL, &p[1 + slot * 2], &element); |
| |
| #if GEN_GEN >= 8 |
| /* On Broadwell and later, we have a separate VF_INSTANCING packet |
| * that controls instancing. On Haswell and prior, that's part of |
| * VERTEX_BUFFER_STATE which we emit later. |
| */ |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VF_INSTANCING), vfi) { |
| vfi.InstancingEnable = pipeline->vb[desc->binding].instanced; |
| vfi.VertexElementIndex = slot; |
| vfi.InstanceDataStepRate = |
| pipeline->vb[desc->binding].instance_divisor; |
| } |
| #endif |
| } |
| |
| const uint32_t id_slot = elem_count; |
| if (needs_svgs_elem) { |
| /* From the Broadwell PRM for the 3D_Vertex_Component_Control enum: |
| * "Within a VERTEX_ELEMENT_STATE structure, if a Component |
| * Control field is set to something other than VFCOMP_STORE_SRC, |
| * no higher-numbered Component Control fields may be set to |
| * VFCOMP_STORE_SRC" |
| * |
| * This means, that if we have BaseInstance, we need BaseVertex as |
| * well. Just do all or nothing. |
| */ |
| uint32_t base_ctrl = (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) ? |
| VFCOMP_STORE_SRC : VFCOMP_STORE_0; |
| |
| struct GENX(VERTEX_ELEMENT_STATE) element = { |
| .VertexBufferIndex = ANV_SVGS_VB_INDEX, |
| .Valid = true, |
| .SourceElementFormat = ISL_FORMAT_R32G32_UINT, |
| .Component0Control = base_ctrl, |
| .Component1Control = base_ctrl, |
| #if GEN_GEN >= 8 |
| .Component2Control = VFCOMP_STORE_0, |
| .Component3Control = VFCOMP_STORE_0, |
| #else |
| .Component2Control = VFCOMP_STORE_VID, |
| .Component3Control = VFCOMP_STORE_IID, |
| #endif |
| }; |
| GENX(VERTEX_ELEMENT_STATE_pack)(NULL, &p[1 + id_slot * 2], &element); |
| } |
| |
| #if GEN_GEN >= 8 |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VF_SGVS), sgvs) { |
| sgvs.VertexIDEnable = vs_prog_data->uses_vertexid; |
| sgvs.VertexIDComponentNumber = 2; |
| sgvs.VertexIDElementOffset = id_slot; |
| sgvs.InstanceIDEnable = vs_prog_data->uses_instanceid; |
| sgvs.InstanceIDComponentNumber = 3; |
| sgvs.InstanceIDElementOffset = id_slot; |
| } |
| #endif |
| |
| const uint32_t drawid_slot = elem_count + needs_svgs_elem; |
| if (vs_prog_data->uses_drawid) { |
| struct GENX(VERTEX_ELEMENT_STATE) element = { |
| .VertexBufferIndex = ANV_DRAWID_VB_INDEX, |
| .Valid = true, |
| .SourceElementFormat = ISL_FORMAT_R32_UINT, |
| .Component0Control = VFCOMP_STORE_SRC, |
| .Component1Control = VFCOMP_STORE_0, |
| .Component2Control = VFCOMP_STORE_0, |
| .Component3Control = VFCOMP_STORE_0, |
| }; |
| GENX(VERTEX_ELEMENT_STATE_pack)(NULL, |
| &p[1 + drawid_slot * 2], |
| &element); |
| |
| #if GEN_GEN >= 8 |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VF_INSTANCING), vfi) { |
| vfi.VertexElementIndex = drawid_slot; |
| } |
| #endif |
| } |
| } |
| |
| void |
| genX(emit_urb_setup)(struct anv_device *device, struct anv_batch *batch, |
| const struct gen_l3_config *l3_config, |
| VkShaderStageFlags active_stages, |
| const unsigned entry_size[4]) |
| { |
| const struct gen_device_info *devinfo = &device->info; |
| #if GEN_IS_HASWELL |
| const unsigned push_constant_kb = devinfo->gt == 3 ? 32 : 16; |
| #else |
| const unsigned push_constant_kb = GEN_GEN >= 8 ? 32 : 16; |
| #endif |
| |
| const unsigned urb_size_kb = gen_get_l3_config_urb_size(devinfo, l3_config); |
| |
| unsigned entries[4]; |
| unsigned start[4]; |
| gen_get_urb_config(devinfo, |
| 1024 * push_constant_kb, 1024 * urb_size_kb, |
| active_stages & |
| VK_SHADER_STAGE_TESSELLATION_EVALUATION_BIT, |
| active_stages & VK_SHADER_STAGE_GEOMETRY_BIT, |
| entry_size, entries, start); |
| |
| #if GEN_GEN == 7 && !GEN_IS_HASWELL |
| /* From the IVB PRM Vol. 2, Part 1, Section 3.2.1: |
| * |
| * "A PIPE_CONTROL with Post-Sync Operation set to 1h and a depth stall |
| * needs to be sent just prior to any 3DSTATE_VS, 3DSTATE_URB_VS, |
| * 3DSTATE_CONSTANT_VS, 3DSTATE_BINDING_TABLE_POINTER_VS, |
| * 3DSTATE_SAMPLER_STATE_POINTER_VS command. Only one PIPE_CONTROL |
| * needs to be sent before any combination of VS associated 3DSTATE." |
| */ |
| anv_batch_emit(batch, GEN7_PIPE_CONTROL, pc) { |
| pc.DepthStallEnable = true; |
| pc.PostSyncOperation = WriteImmediateData; |
| pc.Address = (struct anv_address) { &device->workaround_bo, 0 }; |
| } |
| #endif |
| |
| for (int i = 0; i <= MESA_SHADER_GEOMETRY; i++) { |
| anv_batch_emit(batch, GENX(3DSTATE_URB_VS), urb) { |
| urb._3DCommandSubOpcode += i; |
| urb.VSURBStartingAddress = start[i]; |
| urb.VSURBEntryAllocationSize = entry_size[i] - 1; |
| urb.VSNumberofURBEntries = entries[i]; |
| } |
| } |
| } |
| |
| static void |
| emit_urb_setup(struct anv_pipeline *pipeline) |
| { |
| unsigned entry_size[4]; |
| for (int i = MESA_SHADER_VERTEX; i <= MESA_SHADER_GEOMETRY; i++) { |
| const struct brw_vue_prog_data *prog_data = |
| !anv_pipeline_has_stage(pipeline, i) ? NULL : |
| (const struct brw_vue_prog_data *) pipeline->shaders[i]->prog_data; |
| |
| entry_size[i] = prog_data ? prog_data->urb_entry_size : 1; |
| } |
| |
| genX(emit_urb_setup)(pipeline->device, &pipeline->batch, |
| pipeline->urb.l3_config, |
| pipeline->active_stages, entry_size); |
| } |
| |
| static void |
| emit_3dstate_sbe(struct anv_pipeline *pipeline) |
| { |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| |
| if (!anv_pipeline_has_stage(pipeline, MESA_SHADER_FRAGMENT)) { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_SBE), sbe); |
| #if GEN_GEN >= 8 |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_SBE_SWIZ), sbe); |
| #endif |
| return; |
| } |
| |
| const struct brw_vue_map *fs_input_map = |
| &anv_pipeline_get_last_vue_prog_data(pipeline)->vue_map; |
| |
| struct GENX(3DSTATE_SBE) sbe = { |
| GENX(3DSTATE_SBE_header), |
| .AttributeSwizzleEnable = true, |
| .PointSpriteTextureCoordinateOrigin = UPPERLEFT, |
| .NumberofSFOutputAttributes = wm_prog_data->num_varying_inputs, |
| .ConstantInterpolationEnable = wm_prog_data->flat_inputs, |
| }; |
| |
| #if GEN_GEN >= 9 |
| for (unsigned i = 0; i < 32; i++) |
| sbe.AttributeActiveComponentFormat[i] = ACF_XYZW; |
| #endif |
| |
| #if GEN_GEN >= 8 |
| /* On Broadwell, they broke 3DSTATE_SBE into two packets */ |
| struct GENX(3DSTATE_SBE_SWIZ) swiz = { |
| GENX(3DSTATE_SBE_SWIZ_header), |
| }; |
| #else |
| # define swiz sbe |
| #endif |
| |
| /* Skip the VUE header and position slots by default */ |
| unsigned urb_entry_read_offset = 1; |
| int max_source_attr = 0; |
| for (int attr = 0; attr < VARYING_SLOT_MAX; attr++) { |
| int input_index = wm_prog_data->urb_setup[attr]; |
| |
| if (input_index < 0) |
| continue; |
| |
| /* gl_Layer is stored in the VUE header */ |
| if (attr == VARYING_SLOT_LAYER) { |
| urb_entry_read_offset = 0; |
| continue; |
| } |
| |
| if (attr == VARYING_SLOT_PNTC) { |
| sbe.PointSpriteTextureCoordinateEnable = 1 << input_index; |
| continue; |
| } |
| |
| const int slot = fs_input_map->varying_to_slot[attr]; |
| |
| if (input_index >= 16) |
| continue; |
| |
| if (slot == -1) { |
| /* This attribute does not exist in the VUE--that means that the |
| * vertex shader did not write to it. It could be that it's a |
| * regular varying read by the fragment shader but not written by |
| * the vertex shader or it's gl_PrimitiveID. In the first case the |
| * value is undefined, in the second it needs to be |
| * gl_PrimitiveID. |
| */ |
| swiz.Attribute[input_index].ConstantSource = PRIM_ID; |
| swiz.Attribute[input_index].ComponentOverrideX = true; |
| swiz.Attribute[input_index].ComponentOverrideY = true; |
| swiz.Attribute[input_index].ComponentOverrideZ = true; |
| swiz.Attribute[input_index].ComponentOverrideW = true; |
| } else { |
| /* We have to subtract two slots to accout for the URB entry output |
| * read offset in the VS and GS stages. |
| */ |
| const int source_attr = slot - 2 * urb_entry_read_offset; |
| assert(source_attr >= 0 && source_attr < 32); |
| max_source_attr = MAX2(max_source_attr, source_attr); |
| swiz.Attribute[input_index].SourceAttribute = source_attr; |
| } |
| } |
| |
| sbe.VertexURBEntryReadOffset = urb_entry_read_offset; |
| sbe.VertexURBEntryReadLength = DIV_ROUND_UP(max_source_attr + 1, 2); |
| #if GEN_GEN >= 8 |
| sbe.ForceVertexURBEntryReadOffset = true; |
| sbe.ForceVertexURBEntryReadLength = true; |
| #endif |
| |
| uint32_t *dw = anv_batch_emit_dwords(&pipeline->batch, |
| GENX(3DSTATE_SBE_length)); |
| if (!dw) |
| return; |
| GENX(3DSTATE_SBE_pack)(&pipeline->batch, dw, &sbe); |
| |
| #if GEN_GEN >= 8 |
| dw = anv_batch_emit_dwords(&pipeline->batch, GENX(3DSTATE_SBE_SWIZ_length)); |
| if (!dw) |
| return; |
| GENX(3DSTATE_SBE_SWIZ_pack)(&pipeline->batch, dw, &swiz); |
| #endif |
| } |
| |
| static const uint32_t vk_to_gen_cullmode[] = { |
| [VK_CULL_MODE_NONE] = CULLMODE_NONE, |
| [VK_CULL_MODE_FRONT_BIT] = CULLMODE_FRONT, |
| [VK_CULL_MODE_BACK_BIT] = CULLMODE_BACK, |
| [VK_CULL_MODE_FRONT_AND_BACK] = CULLMODE_BOTH |
| }; |
| |
| static const uint32_t vk_to_gen_fillmode[] = { |
| [VK_POLYGON_MODE_FILL] = FILL_MODE_SOLID, |
| [VK_POLYGON_MODE_LINE] = FILL_MODE_WIREFRAME, |
| [VK_POLYGON_MODE_POINT] = FILL_MODE_POINT, |
| }; |
| |
| static const uint32_t vk_to_gen_front_face[] = { |
| [VK_FRONT_FACE_COUNTER_CLOCKWISE] = 1, |
| [VK_FRONT_FACE_CLOCKWISE] = 0 |
| }; |
| |
| static VkLineRasterizationModeEXT |
| vk_line_rasterization_mode(const VkPipelineRasterizationLineStateCreateInfoEXT *line_info, |
| const VkPipelineMultisampleStateCreateInfo *ms_info) |
| { |
| VkLineRasterizationModeEXT line_mode = |
| line_info ? line_info->lineRasterizationMode : |
| VK_LINE_RASTERIZATION_MODE_DEFAULT_EXT; |
| |
| if (line_mode == VK_LINE_RASTERIZATION_MODE_DEFAULT_EXT) { |
| if (ms_info && ms_info->rasterizationSamples > 1) { |
| return VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT; |
| } else { |
| return VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT; |
| } |
| } |
| |
| return line_mode; |
| } |
| |
| /** Returns the final polygon mode for rasterization |
| * |
| * This function takes into account polygon mode, primitive topology and the |
| * different shader stages which might generate their own type of primitives. |
| */ |
| static VkPolygonMode |
| anv_raster_polygon_mode(struct anv_pipeline *pipeline, |
| const VkPipelineInputAssemblyStateCreateInfo *ia_info, |
| const VkPipelineRasterizationStateCreateInfo *rs_info) |
| { |
| /* Points always override everything. This saves us from having to handle |
| * rs_info->polygonMode in all of the line cases below. |
| */ |
| if (rs_info->polygonMode == VK_POLYGON_MODE_POINT) |
| return VK_POLYGON_MODE_POINT; |
| |
| if (anv_pipeline_has_stage(pipeline, MESA_SHADER_GEOMETRY)) { |
| switch (get_gs_prog_data(pipeline)->output_topology) { |
| case _3DPRIM_POINTLIST: |
| return VK_POLYGON_MODE_POINT; |
| |
| case _3DPRIM_LINELIST: |
| case _3DPRIM_LINESTRIP: |
| case _3DPRIM_LINELOOP: |
| return VK_POLYGON_MODE_LINE; |
| |
| case _3DPRIM_TRILIST: |
| case _3DPRIM_TRIFAN: |
| case _3DPRIM_TRISTRIP: |
| case _3DPRIM_RECTLIST: |
| case _3DPRIM_QUADLIST: |
| case _3DPRIM_QUADSTRIP: |
| case _3DPRIM_POLYGON: |
| return rs_info->polygonMode; |
| } |
| unreachable("Unsupported GS output topology"); |
| } else if (anv_pipeline_has_stage(pipeline, MESA_SHADER_TESS_EVAL)) { |
| switch (get_tes_prog_data(pipeline)->output_topology) { |
| case BRW_TESS_OUTPUT_TOPOLOGY_POINT: |
| return VK_POLYGON_MODE_POINT; |
| |
| case BRW_TESS_OUTPUT_TOPOLOGY_LINE: |
| return VK_POLYGON_MODE_LINE; |
| |
| case BRW_TESS_OUTPUT_TOPOLOGY_TRI_CW: |
| case BRW_TESS_OUTPUT_TOPOLOGY_TRI_CCW: |
| return rs_info->polygonMode; |
| } |
| unreachable("Unsupported TCS output topology"); |
| } else { |
| switch (ia_info->topology) { |
| case VK_PRIMITIVE_TOPOLOGY_POINT_LIST: |
| return VK_POLYGON_MODE_POINT; |
| |
| case VK_PRIMITIVE_TOPOLOGY_LINE_LIST: |
| case VK_PRIMITIVE_TOPOLOGY_LINE_STRIP: |
| case VK_PRIMITIVE_TOPOLOGY_LINE_LIST_WITH_ADJACENCY: |
| case VK_PRIMITIVE_TOPOLOGY_LINE_STRIP_WITH_ADJACENCY: |
| return VK_POLYGON_MODE_LINE; |
| |
| case VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST: |
| case VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP: |
| case VK_PRIMITIVE_TOPOLOGY_TRIANGLE_FAN: |
| case VK_PRIMITIVE_TOPOLOGY_TRIANGLE_LIST_WITH_ADJACENCY: |
| case VK_PRIMITIVE_TOPOLOGY_TRIANGLE_STRIP_WITH_ADJACENCY: |
| return rs_info->polygonMode; |
| |
| default: |
| unreachable("Unsupported primitive topology"); |
| } |
| } |
| } |
| |
| #if GEN_GEN <= 7 |
| static uint32_t |
| gen7_ms_rast_mode(struct anv_pipeline *pipeline, |
| const VkPipelineInputAssemblyStateCreateInfo *ia_info, |
| const VkPipelineRasterizationStateCreateInfo *rs_info, |
| const VkPipelineMultisampleStateCreateInfo *ms_info) |
| { |
| const VkPipelineRasterizationLineStateCreateInfoEXT *line_info = |
| vk_find_struct_const(rs_info->pNext, |
| PIPELINE_RASTERIZATION_LINE_STATE_CREATE_INFO_EXT); |
| |
| VkPolygonMode raster_mode = |
| anv_raster_polygon_mode(pipeline, ia_info, rs_info); |
| if (raster_mode == VK_POLYGON_MODE_LINE) { |
| switch (vk_line_rasterization_mode(line_info, ms_info)) { |
| case VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT: |
| return MSRASTMODE_ON_PATTERN; |
| |
| case VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT: |
| case VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT: |
| return MSRASTMODE_OFF_PIXEL; |
| |
| default: |
| unreachable("Unsupported line rasterization mode"); |
| } |
| } else { |
| return (ms_info && ms_info->rasterizationSamples > 1) ? |
| MSRASTMODE_ON_PATTERN : MSRASTMODE_OFF_PIXEL; |
| } |
| } |
| #endif |
| |
| static void |
| emit_rs_state(struct anv_pipeline *pipeline, |
| const VkPipelineInputAssemblyStateCreateInfo *ia_info, |
| const VkPipelineRasterizationStateCreateInfo *rs_info, |
| const VkPipelineMultisampleStateCreateInfo *ms_info, |
| const VkPipelineRasterizationLineStateCreateInfoEXT *line_info, |
| const struct anv_render_pass *pass, |
| const struct anv_subpass *subpass) |
| { |
| struct GENX(3DSTATE_SF) sf = { |
| GENX(3DSTATE_SF_header), |
| }; |
| |
| sf.ViewportTransformEnable = true; |
| sf.StatisticsEnable = true; |
| sf.TriangleStripListProvokingVertexSelect = 0; |
| sf.LineStripListProvokingVertexSelect = 0; |
| sf.TriangleFanProvokingVertexSelect = 1; |
| sf.VertexSubPixelPrecisionSelect = _8Bit; |
| sf.AALineDistanceMode = true; |
| |
| #if GEN_IS_HASWELL |
| sf.LineStippleEnable = line_info && line_info->stippledLineEnable; |
| #endif |
| |
| const struct brw_vue_prog_data *last_vue_prog_data = |
| anv_pipeline_get_last_vue_prog_data(pipeline); |
| |
| if (last_vue_prog_data->vue_map.slots_valid & VARYING_BIT_PSIZ) { |
| sf.PointWidthSource = Vertex; |
| } else { |
| sf.PointWidthSource = State; |
| sf.PointWidth = 1.0; |
| } |
| |
| #if GEN_GEN >= 8 |
| struct GENX(3DSTATE_RASTER) raster = { |
| GENX(3DSTATE_RASTER_header), |
| }; |
| #else |
| # define raster sf |
| #endif |
| |
| VkPolygonMode raster_mode = |
| anv_raster_polygon_mode(pipeline, ia_info, rs_info); |
| VkLineRasterizationModeEXT line_mode = |
| vk_line_rasterization_mode(line_info, ms_info); |
| |
| /* For details on 3DSTATE_RASTER multisample state, see the BSpec table |
| * "Multisample Modes State". |
| */ |
| #if GEN_GEN >= 8 |
| if (raster_mode == VK_POLYGON_MODE_LINE) { |
| /* Unfortunately, configuring our line rasterization hardware on gen8 |
| * and later is rather painful. Instead of giving us bits to tell the |
| * hardware what line mode to use like we had on gen7, we now have an |
| * arcane combination of API Mode and MSAA enable bits which do things |
| * in a table which are expected to magically put the hardware into the |
| * right mode for your API. Sadly, Vulkan isn't any of the APIs the |
| * hardware people thought of so nothing works the way you want it to. |
| * |
| * Look at the table titled "Multisample Rasterization Modes" in Vol 7 |
| * of the Skylake PRM for more details. |
| */ |
| switch (line_mode) { |
| case VK_LINE_RASTERIZATION_MODE_RECTANGULAR_EXT: |
| raster.APIMode = DX100; |
| raster.DXMultisampleRasterizationEnable = true; |
| break; |
| |
| case VK_LINE_RASTERIZATION_MODE_BRESENHAM_EXT: |
| case VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT: |
| raster.APIMode = DX9OGL; |
| raster.DXMultisampleRasterizationEnable = false; |
| break; |
| |
| default: |
| unreachable("Unsupported line rasterization mode"); |
| } |
| } else { |
| raster.APIMode = DX100; |
| raster.DXMultisampleRasterizationEnable = true; |
| } |
| |
| /* NOTE: 3DSTATE_RASTER::ForcedSampleCount affects the BDW and SKL PMA fix |
| * computations. If we ever set this bit to a different value, they will |
| * need to be updated accordingly. |
| */ |
| raster.ForcedSampleCount = FSC_NUMRASTSAMPLES_0; |
| raster.ForceMultisampling = false; |
| #else |
| raster.MultisampleRasterizationMode = |
| gen7_ms_rast_mode(pipeline, ia_info, rs_info, ms_info); |
| #endif |
| |
| if (raster_mode == VK_POLYGON_MODE_LINE && |
| line_mode == VK_LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT) |
| raster.AntialiasingEnable = true; |
| |
| raster.FrontWinding = vk_to_gen_front_face[rs_info->frontFace]; |
| raster.CullMode = vk_to_gen_cullmode[rs_info->cullMode]; |
| raster.FrontFaceFillMode = vk_to_gen_fillmode[rs_info->polygonMode]; |
| raster.BackFaceFillMode = vk_to_gen_fillmode[rs_info->polygonMode]; |
| raster.ScissorRectangleEnable = true; |
| |
| #if GEN_GEN >= 9 |
| /* GEN9+ splits ViewportZClipTestEnable into near and far enable bits */ |
| raster.ViewportZFarClipTestEnable = pipeline->depth_clip_enable; |
| raster.ViewportZNearClipTestEnable = pipeline->depth_clip_enable; |
| #elif GEN_GEN >= 8 |
| raster.ViewportZClipTestEnable = pipeline->depth_clip_enable; |
| #endif |
| |
| raster.GlobalDepthOffsetEnableSolid = rs_info->depthBiasEnable; |
| raster.GlobalDepthOffsetEnableWireframe = rs_info->depthBiasEnable; |
| raster.GlobalDepthOffsetEnablePoint = rs_info->depthBiasEnable; |
| |
| #if GEN_GEN == 7 |
| /* Gen7 requires that we provide the depth format in 3DSTATE_SF so that it |
| * can get the depth offsets correct. |
| */ |
| if (subpass->depth_stencil_attachment) { |
| VkFormat vk_format = |
| pass->attachments[subpass->depth_stencil_attachment->attachment].format; |
| assert(vk_format_is_depth_or_stencil(vk_format)); |
| if (vk_format_aspects(vk_format) & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| enum isl_format isl_format = |
| anv_get_isl_format(&pipeline->device->info, vk_format, |
| VK_IMAGE_ASPECT_DEPTH_BIT, |
| VK_IMAGE_TILING_OPTIMAL); |
| sf.DepthBufferSurfaceFormat = |
| isl_format_get_depth_format(isl_format, false); |
| } |
| } |
| #endif |
| |
| #if GEN_GEN >= 8 |
| GENX(3DSTATE_SF_pack)(NULL, pipeline->gen8.sf, &sf); |
| GENX(3DSTATE_RASTER_pack)(NULL, pipeline->gen8.raster, &raster); |
| #else |
| # undef raster |
| GENX(3DSTATE_SF_pack)(NULL, &pipeline->gen7.sf, &sf); |
| #endif |
| } |
| |
| static void |
| emit_ms_state(struct anv_pipeline *pipeline, |
| const VkPipelineMultisampleStateCreateInfo *info) |
| { |
| uint32_t samples = 1; |
| uint32_t log2_samples = 0; |
| |
| /* From the Vulkan 1.0 spec: |
| * If pSampleMask is NULL, it is treated as if the mask has all bits |
| * enabled, i.e. no coverage is removed from fragments. |
| * |
| * 3DSTATE_SAMPLE_MASK.SampleMask is 16 bits. |
| */ |
| #if GEN_GEN >= 8 |
| uint32_t sample_mask = 0xffff; |
| #else |
| uint32_t sample_mask = 0xff; |
| #endif |
| |
| if (info) { |
| samples = info->rasterizationSamples; |
| log2_samples = __builtin_ffs(samples) - 1; |
| } |
| |
| if (info && info->pSampleMask) |
| sample_mask &= info->pSampleMask[0]; |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_MULTISAMPLE), ms) { |
| ms.NumberofMultisamples = log2_samples; |
| |
| ms.PixelLocation = CENTER; |
| #if GEN_GEN >= 8 |
| /* The PRM says that this bit is valid only for DX9: |
| * |
| * SW can choose to set this bit only for DX9 API. DX10/OGL API's |
| * should not have any effect by setting or not setting this bit. |
| */ |
| ms.PixelPositionOffsetEnable = false; |
| #else |
| |
| switch (samples) { |
| case 1: |
| GEN_SAMPLE_POS_1X(ms.Sample); |
| break; |
| case 2: |
| GEN_SAMPLE_POS_2X(ms.Sample); |
| break; |
| case 4: |
| GEN_SAMPLE_POS_4X(ms.Sample); |
| break; |
| case 8: |
| GEN_SAMPLE_POS_8X(ms.Sample); |
| break; |
| default: |
| break; |
| } |
| #endif |
| } |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_SAMPLE_MASK), sm) { |
| sm.SampleMask = sample_mask; |
| } |
| } |
| |
| static const uint32_t vk_to_gen_logic_op[] = { |
| [VK_LOGIC_OP_COPY] = LOGICOP_COPY, |
| [VK_LOGIC_OP_CLEAR] = LOGICOP_CLEAR, |
| [VK_LOGIC_OP_AND] = LOGICOP_AND, |
| [VK_LOGIC_OP_AND_REVERSE] = LOGICOP_AND_REVERSE, |
| [VK_LOGIC_OP_AND_INVERTED] = LOGICOP_AND_INVERTED, |
| [VK_LOGIC_OP_NO_OP] = LOGICOP_NOOP, |
| [VK_LOGIC_OP_XOR] = LOGICOP_XOR, |
| [VK_LOGIC_OP_OR] = LOGICOP_OR, |
| [VK_LOGIC_OP_NOR] = LOGICOP_NOR, |
| [VK_LOGIC_OP_EQUIVALENT] = LOGICOP_EQUIV, |
| [VK_LOGIC_OP_INVERT] = LOGICOP_INVERT, |
| [VK_LOGIC_OP_OR_REVERSE] = LOGICOP_OR_REVERSE, |
| [VK_LOGIC_OP_COPY_INVERTED] = LOGICOP_COPY_INVERTED, |
| [VK_LOGIC_OP_OR_INVERTED] = LOGICOP_OR_INVERTED, |
| [VK_LOGIC_OP_NAND] = LOGICOP_NAND, |
| [VK_LOGIC_OP_SET] = LOGICOP_SET, |
| }; |
| |
| static const uint32_t vk_to_gen_blend[] = { |
| [VK_BLEND_FACTOR_ZERO] = BLENDFACTOR_ZERO, |
| [VK_BLEND_FACTOR_ONE] = BLENDFACTOR_ONE, |
| [VK_BLEND_FACTOR_SRC_COLOR] = BLENDFACTOR_SRC_COLOR, |
| [VK_BLEND_FACTOR_ONE_MINUS_SRC_COLOR] = BLENDFACTOR_INV_SRC_COLOR, |
| [VK_BLEND_FACTOR_DST_COLOR] = BLENDFACTOR_DST_COLOR, |
| [VK_BLEND_FACTOR_ONE_MINUS_DST_COLOR] = BLENDFACTOR_INV_DST_COLOR, |
| [VK_BLEND_FACTOR_SRC_ALPHA] = BLENDFACTOR_SRC_ALPHA, |
| [VK_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA] = BLENDFACTOR_INV_SRC_ALPHA, |
| [VK_BLEND_FACTOR_DST_ALPHA] = BLENDFACTOR_DST_ALPHA, |
| [VK_BLEND_FACTOR_ONE_MINUS_DST_ALPHA] = BLENDFACTOR_INV_DST_ALPHA, |
| [VK_BLEND_FACTOR_CONSTANT_COLOR] = BLENDFACTOR_CONST_COLOR, |
| [VK_BLEND_FACTOR_ONE_MINUS_CONSTANT_COLOR]= BLENDFACTOR_INV_CONST_COLOR, |
| [VK_BLEND_FACTOR_CONSTANT_ALPHA] = BLENDFACTOR_CONST_ALPHA, |
| [VK_BLEND_FACTOR_ONE_MINUS_CONSTANT_ALPHA]= BLENDFACTOR_INV_CONST_ALPHA, |
| [VK_BLEND_FACTOR_SRC_ALPHA_SATURATE] = BLENDFACTOR_SRC_ALPHA_SATURATE, |
| [VK_BLEND_FACTOR_SRC1_COLOR] = BLENDFACTOR_SRC1_COLOR, |
| [VK_BLEND_FACTOR_ONE_MINUS_SRC1_COLOR] = BLENDFACTOR_INV_SRC1_COLOR, |
| [VK_BLEND_FACTOR_SRC1_ALPHA] = BLENDFACTOR_SRC1_ALPHA, |
| [VK_BLEND_FACTOR_ONE_MINUS_SRC1_ALPHA] = BLENDFACTOR_INV_SRC1_ALPHA, |
| }; |
| |
| static const uint32_t vk_to_gen_blend_op[] = { |
| [VK_BLEND_OP_ADD] = BLENDFUNCTION_ADD, |
| [VK_BLEND_OP_SUBTRACT] = BLENDFUNCTION_SUBTRACT, |
| [VK_BLEND_OP_REVERSE_SUBTRACT] = BLENDFUNCTION_REVERSE_SUBTRACT, |
| [VK_BLEND_OP_MIN] = BLENDFUNCTION_MIN, |
| [VK_BLEND_OP_MAX] = BLENDFUNCTION_MAX, |
| }; |
| |
| static const uint32_t vk_to_gen_compare_op[] = { |
| [VK_COMPARE_OP_NEVER] = PREFILTEROPNEVER, |
| [VK_COMPARE_OP_LESS] = PREFILTEROPLESS, |
| [VK_COMPARE_OP_EQUAL] = PREFILTEROPEQUAL, |
| [VK_COMPARE_OP_LESS_OR_EQUAL] = PREFILTEROPLEQUAL, |
| [VK_COMPARE_OP_GREATER] = PREFILTEROPGREATER, |
| [VK_COMPARE_OP_NOT_EQUAL] = PREFILTEROPNOTEQUAL, |
| [VK_COMPARE_OP_GREATER_OR_EQUAL] = PREFILTEROPGEQUAL, |
| [VK_COMPARE_OP_ALWAYS] = PREFILTEROPALWAYS, |
| }; |
| |
| static const uint32_t vk_to_gen_stencil_op[] = { |
| [VK_STENCIL_OP_KEEP] = STENCILOP_KEEP, |
| [VK_STENCIL_OP_ZERO] = STENCILOP_ZERO, |
| [VK_STENCIL_OP_REPLACE] = STENCILOP_REPLACE, |
| [VK_STENCIL_OP_INCREMENT_AND_CLAMP] = STENCILOP_INCRSAT, |
| [VK_STENCIL_OP_DECREMENT_AND_CLAMP] = STENCILOP_DECRSAT, |
| [VK_STENCIL_OP_INVERT] = STENCILOP_INVERT, |
| [VK_STENCIL_OP_INCREMENT_AND_WRAP] = STENCILOP_INCR, |
| [VK_STENCIL_OP_DECREMENT_AND_WRAP] = STENCILOP_DECR, |
| }; |
| |
| /* This function sanitizes the VkStencilOpState by looking at the compare ops |
| * and trying to determine whether or not a given stencil op can ever actually |
| * occur. Stencil ops which can never occur are set to VK_STENCIL_OP_KEEP. |
| * This function returns true if, after sanitation, any of the stencil ops are |
| * set to something other than VK_STENCIL_OP_KEEP. |
| */ |
| static bool |
| sanitize_stencil_face(VkStencilOpState *face, |
| VkCompareOp depthCompareOp) |
| { |
| /* If compareOp is ALWAYS then the stencil test will never fail and failOp |
| * will never happen. Set failOp to KEEP in this case. |
| */ |
| if (face->compareOp == VK_COMPARE_OP_ALWAYS) |
| face->failOp = VK_STENCIL_OP_KEEP; |
| |
| /* If compareOp is NEVER or depthCompareOp is NEVER then one of the depth |
| * or stencil tests will fail and passOp will never happen. |
| */ |
| if (face->compareOp == VK_COMPARE_OP_NEVER || |
| depthCompareOp == VK_COMPARE_OP_NEVER) |
| face->passOp = VK_STENCIL_OP_KEEP; |
| |
| /* If compareOp is NEVER or depthCompareOp is ALWAYS then either the |
| * stencil test will fail or the depth test will pass. In either case, |
| * depthFailOp will never happen. |
| */ |
| if (face->compareOp == VK_COMPARE_OP_NEVER || |
| depthCompareOp == VK_COMPARE_OP_ALWAYS) |
| face->depthFailOp = VK_STENCIL_OP_KEEP; |
| |
| return face->failOp != VK_STENCIL_OP_KEEP || |
| face->depthFailOp != VK_STENCIL_OP_KEEP || |
| face->passOp != VK_STENCIL_OP_KEEP; |
| } |
| |
| /* Intel hardware is fairly sensitive to whether or not depth/stencil writes |
| * are enabled. In the presence of discards, it's fairly easy to get into the |
| * non-promoted case which means a fairly big performance hit. From the Iron |
| * Lake PRM, Vol 2, pt. 1, section 8.4.3.2, "Early Depth Test Cases": |
| * |
| * "Non-promoted depth (N) is active whenever the depth test can be done |
| * early but it cannot determine whether or not to write source depth to |
| * the depth buffer, therefore the depth write must be performed post pixel |
| * shader. This includes cases where the pixel shader can kill pixels, |
| * including via sampler chroma key, as well as cases where the alpha test |
| * function is enabled, which kills pixels based on a programmable alpha |
| * test. In this case, even if the depth test fails, the pixel cannot be |
| * killed if a stencil write is indicated. Whether or not the stencil write |
| * happens depends on whether or not the pixel is killed later. In these |
| * cases if stencil test fails and stencil writes are off, the pixels can |
| * also be killed early. If stencil writes are enabled, the pixels must be |
| * treated as Computed depth (described above)." |
| * |
| * The same thing as mentioned in the stencil case can happen in the depth |
| * case as well if it thinks it writes depth but, thanks to the depth test |
| * being GL_EQUAL, the write doesn't actually matter. A little extra work |
| * up-front to try and disable depth and stencil writes can make a big |
| * difference. |
| * |
| * Unfortunately, the way depth and stencil testing is specified, there are |
| * many case where, regardless of depth/stencil writes being enabled, nothing |
| * actually gets written due to some other bit of state being set. This |
| * function attempts to "sanitize" the depth stencil state and disable writes |
| * and sometimes even testing whenever possible. |
| */ |
| static void |
| sanitize_ds_state(VkPipelineDepthStencilStateCreateInfo *state, |
| bool *stencilWriteEnable, |
| VkImageAspectFlags ds_aspects) |
| { |
| *stencilWriteEnable = state->stencilTestEnable; |
| |
| /* If the depth test is disabled, we won't be writing anything. Make sure we |
| * treat the test as always passing later on as well. |
| * |
| * Also, the Vulkan spec requires that if either depth or stencil is not |
| * present, the pipeline is to act as if the test silently passes. In that |
| * case we won't write either. |
| */ |
| if (!state->depthTestEnable || !(ds_aspects & VK_IMAGE_ASPECT_DEPTH_BIT)) { |
| state->depthWriteEnable = false; |
| state->depthCompareOp = VK_COMPARE_OP_ALWAYS; |
| } |
| |
| if (!(ds_aspects & VK_IMAGE_ASPECT_STENCIL_BIT)) { |
| *stencilWriteEnable = false; |
| state->front.compareOp = VK_COMPARE_OP_ALWAYS; |
| state->back.compareOp = VK_COMPARE_OP_ALWAYS; |
| } |
| |
| /* If the stencil test is enabled and always fails, then we will never get |
| * to the depth test so we can just disable the depth test entirely. |
| */ |
| if (state->stencilTestEnable && |
| state->front.compareOp == VK_COMPARE_OP_NEVER && |
| state->back.compareOp == VK_COMPARE_OP_NEVER) { |
| state->depthTestEnable = false; |
| state->depthWriteEnable = false; |
| } |
| |
| /* If depthCompareOp is EQUAL then the value we would be writing to the |
| * depth buffer is the same as the value that's already there so there's no |
| * point in writing it. |
| */ |
| if (state->depthCompareOp == VK_COMPARE_OP_EQUAL) |
| state->depthWriteEnable = false; |
| |
| /* If the stencil ops are such that we don't actually ever modify the |
| * stencil buffer, we should disable writes. |
| */ |
| if (!sanitize_stencil_face(&state->front, state->depthCompareOp) && |
| !sanitize_stencil_face(&state->back, state->depthCompareOp)) |
| *stencilWriteEnable = false; |
| |
| /* If the depth test always passes and we never write out depth, that's the |
| * same as if the depth test is disabled entirely. |
| */ |
| if (state->depthCompareOp == VK_COMPARE_OP_ALWAYS && |
| !state->depthWriteEnable) |
| state->depthTestEnable = false; |
| |
| /* If the stencil test always passes and we never write out stencil, that's |
| * the same as if the stencil test is disabled entirely. |
| */ |
| if (state->front.compareOp == VK_COMPARE_OP_ALWAYS && |
| state->back.compareOp == VK_COMPARE_OP_ALWAYS && |
| !*stencilWriteEnable) |
| state->stencilTestEnable = false; |
| } |
| |
| static void |
| emit_ds_state(struct anv_pipeline *pipeline, |
| const VkPipelineDepthStencilStateCreateInfo *pCreateInfo, |
| const struct anv_render_pass *pass, |
| const struct anv_subpass *subpass) |
| { |
| #if GEN_GEN == 7 |
| # define depth_stencil_dw pipeline->gen7.depth_stencil_state |
| #elif GEN_GEN == 8 |
| # define depth_stencil_dw pipeline->gen8.wm_depth_stencil |
| #else |
| # define depth_stencil_dw pipeline->gen9.wm_depth_stencil |
| #endif |
| |
| if (pCreateInfo == NULL) { |
| /* We're going to OR this together with the dynamic state. We need |
| * to make sure it's initialized to something useful. |
| */ |
| pipeline->writes_stencil = false; |
| pipeline->stencil_test_enable = false; |
| pipeline->writes_depth = false; |
| pipeline->depth_test_enable = false; |
| memset(depth_stencil_dw, 0, sizeof(depth_stencil_dw)); |
| return; |
| } |
| |
| VkImageAspectFlags ds_aspects = 0; |
| if (subpass->depth_stencil_attachment) { |
| VkFormat depth_stencil_format = |
| pass->attachments[subpass->depth_stencil_attachment->attachment].format; |
| ds_aspects = vk_format_aspects(depth_stencil_format); |
| } |
| |
| VkPipelineDepthStencilStateCreateInfo info = *pCreateInfo; |
| sanitize_ds_state(&info, &pipeline->writes_stencil, ds_aspects); |
| pipeline->stencil_test_enable = info.stencilTestEnable; |
| pipeline->writes_depth = info.depthWriteEnable; |
| pipeline->depth_test_enable = info.depthTestEnable; |
| |
| /* VkBool32 depthBoundsTestEnable; // optional (depth_bounds_test) */ |
| |
| #if GEN_GEN <= 7 |
| struct GENX(DEPTH_STENCIL_STATE) depth_stencil = { |
| #else |
| struct GENX(3DSTATE_WM_DEPTH_STENCIL) depth_stencil = { |
| #endif |
| .DepthTestEnable = info.depthTestEnable, |
| .DepthBufferWriteEnable = info.depthWriteEnable, |
| .DepthTestFunction = vk_to_gen_compare_op[info.depthCompareOp], |
| .DoubleSidedStencilEnable = true, |
| |
| .StencilTestEnable = info.stencilTestEnable, |
| .StencilFailOp = vk_to_gen_stencil_op[info.front.failOp], |
| .StencilPassDepthPassOp = vk_to_gen_stencil_op[info.front.passOp], |
| .StencilPassDepthFailOp = vk_to_gen_stencil_op[info.front.depthFailOp], |
| .StencilTestFunction = vk_to_gen_compare_op[info.front.compareOp], |
| .BackfaceStencilFailOp = vk_to_gen_stencil_op[info.back.failOp], |
| .BackfaceStencilPassDepthPassOp = vk_to_gen_stencil_op[info.back.passOp], |
| .BackfaceStencilPassDepthFailOp =vk_to_gen_stencil_op[info.back.depthFailOp], |
| .BackfaceStencilTestFunction = vk_to_gen_compare_op[info.back.compareOp], |
| }; |
| |
| #if GEN_GEN <= 7 |
| GENX(DEPTH_STENCIL_STATE_pack)(NULL, depth_stencil_dw, &depth_stencil); |
| #else |
| GENX(3DSTATE_WM_DEPTH_STENCIL_pack)(NULL, depth_stencil_dw, &depth_stencil); |
| #endif |
| } |
| |
| static bool |
| is_dual_src_blend_factor(VkBlendFactor factor) |
| { |
| return factor == VK_BLEND_FACTOR_SRC1_COLOR || |
| factor == VK_BLEND_FACTOR_ONE_MINUS_SRC1_COLOR || |
| factor == VK_BLEND_FACTOR_SRC1_ALPHA || |
| factor == VK_BLEND_FACTOR_ONE_MINUS_SRC1_ALPHA; |
| } |
| |
| static void |
| emit_cb_state(struct anv_pipeline *pipeline, |
| const VkPipelineColorBlendStateCreateInfo *info, |
| const VkPipelineMultisampleStateCreateInfo *ms_info) |
| { |
| struct anv_device *device = pipeline->device; |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| |
| struct GENX(BLEND_STATE) blend_state = { |
| #if GEN_GEN >= 8 |
| .AlphaToCoverageEnable = ms_info && ms_info->alphaToCoverageEnable, |
| .AlphaToOneEnable = ms_info && ms_info->alphaToOneEnable, |
| #endif |
| }; |
| |
| uint32_t surface_count = 0; |
| struct anv_pipeline_bind_map *map; |
| if (anv_pipeline_has_stage(pipeline, MESA_SHADER_FRAGMENT)) { |
| map = &pipeline->shaders[MESA_SHADER_FRAGMENT]->bind_map; |
| surface_count = map->surface_count; |
| } |
| |
| const uint32_t num_dwords = GENX(BLEND_STATE_length) + |
| GENX(BLEND_STATE_ENTRY_length) * surface_count; |
| pipeline->blend_state = |
| anv_state_pool_alloc(&device->dynamic_state_pool, num_dwords * 4, 64); |
| |
| bool has_writeable_rt = false; |
| uint32_t *state_pos = pipeline->blend_state.map; |
| state_pos += GENX(BLEND_STATE_length); |
| #if GEN_GEN >= 8 |
| struct GENX(BLEND_STATE_ENTRY) bs0 = { 0 }; |
| #endif |
| for (unsigned i = 0; i < surface_count; i++) { |
| struct anv_pipeline_binding *binding = &map->surface_to_descriptor[i]; |
| |
| /* All color attachments are at the beginning of the binding table */ |
| if (binding->set != ANV_DESCRIPTOR_SET_COLOR_ATTACHMENTS) |
| break; |
| |
| /* We can have at most 8 attachments */ |
| assert(i < 8); |
| |
| if (info == NULL || binding->index >= info->attachmentCount) { |
| /* Default everything to disabled */ |
| struct GENX(BLEND_STATE_ENTRY) entry = { |
| .WriteDisableAlpha = true, |
| .WriteDisableRed = true, |
| .WriteDisableGreen = true, |
| .WriteDisableBlue = true, |
| }; |
| GENX(BLEND_STATE_ENTRY_pack)(NULL, state_pos, &entry); |
| state_pos += GENX(BLEND_STATE_ENTRY_length); |
| continue; |
| } |
| |
| assert(binding->binding == 0); |
| const VkPipelineColorBlendAttachmentState *a = |
| &info->pAttachments[binding->index]; |
| |
| struct GENX(BLEND_STATE_ENTRY) entry = { |
| #if GEN_GEN < 8 |
| .AlphaToCoverageEnable = ms_info && ms_info->alphaToCoverageEnable, |
| .AlphaToOneEnable = ms_info && ms_info->alphaToOneEnable, |
| #endif |
| .LogicOpEnable = info->logicOpEnable, |
| .LogicOpFunction = vk_to_gen_logic_op[info->logicOp], |
| .ColorBufferBlendEnable = a->blendEnable, |
| .ColorClampRange = COLORCLAMP_RTFORMAT, |
| .PreBlendColorClampEnable = true, |
| .PostBlendColorClampEnable = true, |
| .SourceBlendFactor = vk_to_gen_blend[a->srcColorBlendFactor], |
| .DestinationBlendFactor = vk_to_gen_blend[a->dstColorBlendFactor], |
| .ColorBlendFunction = vk_to_gen_blend_op[a->colorBlendOp], |
| .SourceAlphaBlendFactor = vk_to_gen_blend[a->srcAlphaBlendFactor], |
| .DestinationAlphaBlendFactor = vk_to_gen_blend[a->dstAlphaBlendFactor], |
| .AlphaBlendFunction = vk_to_gen_blend_op[a->alphaBlendOp], |
| .WriteDisableAlpha = !(a->colorWriteMask & VK_COLOR_COMPONENT_A_BIT), |
| .WriteDisableRed = !(a->colorWriteMask & VK_COLOR_COMPONENT_R_BIT), |
| .WriteDisableGreen = !(a->colorWriteMask & VK_COLOR_COMPONENT_G_BIT), |
| .WriteDisableBlue = !(a->colorWriteMask & VK_COLOR_COMPONENT_B_BIT), |
| }; |
| |
| if (a->srcColorBlendFactor != a->srcAlphaBlendFactor || |
| a->dstColorBlendFactor != a->dstAlphaBlendFactor || |
| a->colorBlendOp != a->alphaBlendOp) { |
| #if GEN_GEN >= 8 |
| blend_state.IndependentAlphaBlendEnable = true; |
| #else |
| entry.IndependentAlphaBlendEnable = true; |
| #endif |
| } |
| |
| /* The Dual Source Blending documentation says: |
| * |
| * "If SRC1 is included in a src/dst blend factor and |
| * a DualSource RT Write message is not used, results |
| * are UNDEFINED. (This reflects the same restriction in DX APIs, |
| * where undefined results are produced if “o1” is not written |
| * by a PS – there are no default values defined)." |
| * |
| * There is no way to gracefully fix this undefined situation |
| * so we just disable the blending to prevent possible issues. |
| */ |
| if (!wm_prog_data->dual_src_blend && |
| (is_dual_src_blend_factor(a->srcColorBlendFactor) || |
| is_dual_src_blend_factor(a->dstColorBlendFactor) || |
| is_dual_src_blend_factor(a->srcAlphaBlendFactor) || |
| is_dual_src_blend_factor(a->dstAlphaBlendFactor))) { |
| vk_debug_report(&device->instance->debug_report_callbacks, |
| VK_DEBUG_REPORT_WARNING_BIT_EXT, |
| VK_DEBUG_REPORT_OBJECT_TYPE_DEVICE_EXT, |
| (uint64_t)(uintptr_t)device, |
| 0, 0, "anv", |
| "Enabled dual-src blend factors without writing both targets " |
| "in the shader. Disabling blending to avoid GPU hangs."); |
| entry.ColorBufferBlendEnable = false; |
| } |
| |
| if (a->colorWriteMask != 0) |
| has_writeable_rt = true; |
| |
| /* Our hardware applies the blend factor prior to the blend function |
| * regardless of what function is used. Technically, this means the |
| * hardware can do MORE than GL or Vulkan specify. However, it also |
| * means that, for MIN and MAX, we have to stomp the blend factor to |
| * ONE to make it a no-op. |
| */ |
| if (a->colorBlendOp == VK_BLEND_OP_MIN || |
| a->colorBlendOp == VK_BLEND_OP_MAX) { |
| entry.SourceBlendFactor = BLENDFACTOR_ONE; |
| entry.DestinationBlendFactor = BLENDFACTOR_ONE; |
| } |
| if (a->alphaBlendOp == VK_BLEND_OP_MIN || |
| a->alphaBlendOp == VK_BLEND_OP_MAX) { |
| entry.SourceAlphaBlendFactor = BLENDFACTOR_ONE; |
| entry.DestinationAlphaBlendFactor = BLENDFACTOR_ONE; |
| } |
| GENX(BLEND_STATE_ENTRY_pack)(NULL, state_pos, &entry); |
| state_pos += GENX(BLEND_STATE_ENTRY_length); |
| #if GEN_GEN >= 8 |
| if (i == 0) |
| bs0 = entry; |
| #endif |
| } |
| |
| #if GEN_GEN >= 8 |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_PS_BLEND), blend) { |
| blend.AlphaToCoverageEnable = blend_state.AlphaToCoverageEnable; |
| blend.HasWriteableRT = has_writeable_rt; |
| blend.ColorBufferBlendEnable = bs0.ColorBufferBlendEnable; |
| blend.SourceAlphaBlendFactor = bs0.SourceAlphaBlendFactor; |
| blend.DestinationAlphaBlendFactor = bs0.DestinationAlphaBlendFactor; |
| blend.SourceBlendFactor = bs0.SourceBlendFactor; |
| blend.DestinationBlendFactor = bs0.DestinationBlendFactor; |
| blend.AlphaTestEnable = false; |
| blend.IndependentAlphaBlendEnable = |
| blend_state.IndependentAlphaBlendEnable; |
| } |
| #else |
| (void)has_writeable_rt; |
| #endif |
| |
| GENX(BLEND_STATE_pack)(NULL, pipeline->blend_state.map, &blend_state); |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_BLEND_STATE_POINTERS), bsp) { |
| bsp.BlendStatePointer = pipeline->blend_state.offset; |
| #if GEN_GEN >= 8 |
| bsp.BlendStatePointerValid = true; |
| #endif |
| } |
| } |
| |
| static void |
| emit_3dstate_clip(struct anv_pipeline *pipeline, |
| const VkPipelineInputAssemblyStateCreateInfo *ia_info, |
| const VkPipelineViewportStateCreateInfo *vp_info, |
| const VkPipelineRasterizationStateCreateInfo *rs_info) |
| { |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| (void) wm_prog_data; |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_CLIP), clip) { |
| clip.ClipEnable = true; |
| clip.StatisticsEnable = true; |
| clip.EarlyCullEnable = true; |
| clip.APIMode = APIMODE_D3D; |
| clip.GuardbandClipTestEnable = true; |
| |
| /* Only enable the XY clip test when the final polygon rasterization |
| * mode is VK_POLYGON_MODE_FILL. We want to leave it disabled for |
| * points and lines so we get "pop-free" clipping. |
| */ |
| VkPolygonMode raster_mode = |
| anv_raster_polygon_mode(pipeline, ia_info, rs_info); |
| clip.ViewportXYClipTestEnable = (raster_mode == VK_POLYGON_MODE_FILL); |
| |
| #if GEN_GEN >= 8 |
| clip.VertexSubPixelPrecisionSelect = _8Bit; |
| #endif |
| |
| clip.ClipMode = CLIPMODE_NORMAL; |
| |
| clip.TriangleStripListProvokingVertexSelect = 0; |
| clip.LineStripListProvokingVertexSelect = 0; |
| clip.TriangleFanProvokingVertexSelect = 1; |
| |
| clip.MinimumPointWidth = 0.125; |
| clip.MaximumPointWidth = 255.875; |
| |
| const struct brw_vue_prog_data *last = |
| anv_pipeline_get_last_vue_prog_data(pipeline); |
| |
| /* From the Vulkan 1.0.45 spec: |
| * |
| * "If the last active vertex processing stage shader entry point's |
| * interface does not include a variable decorated with |
| * ViewportIndex, then the first viewport is used." |
| */ |
| if (vp_info && (last->vue_map.slots_valid & VARYING_BIT_VIEWPORT)) { |
| clip.MaximumVPIndex = vp_info->viewportCount - 1; |
| } else { |
| clip.MaximumVPIndex = 0; |
| } |
| |
| /* From the Vulkan 1.0.45 spec: |
| * |
| * "If the last active vertex processing stage shader entry point's |
| * interface does not include a variable decorated with Layer, then |
| * the first layer is used." |
| */ |
| clip.ForceZeroRTAIndexEnable = |
| !(last->vue_map.slots_valid & VARYING_BIT_LAYER); |
| |
| #if GEN_GEN == 7 |
| clip.FrontWinding = vk_to_gen_front_face[rs_info->frontFace]; |
| clip.CullMode = vk_to_gen_cullmode[rs_info->cullMode]; |
| clip.ViewportZClipTestEnable = pipeline->depth_clip_enable; |
| clip.UserClipDistanceClipTestEnableBitmask = last->clip_distance_mask; |
| clip.UserClipDistanceCullTestEnableBitmask = last->cull_distance_mask; |
| #else |
| clip.NonPerspectiveBarycentricEnable = wm_prog_data ? |
| (wm_prog_data->barycentric_interp_modes & |
| BRW_BARYCENTRIC_NONPERSPECTIVE_BITS) != 0 : 0; |
| #endif |
| } |
| } |
| |
| static void |
| emit_3dstate_streamout(struct anv_pipeline *pipeline, |
| const VkPipelineRasterizationStateCreateInfo *rs_info) |
| { |
| #if GEN_GEN >= 8 |
| const struct brw_vue_prog_data *prog_data = |
| anv_pipeline_get_last_vue_prog_data(pipeline); |
| const struct brw_vue_map *vue_map = &prog_data->vue_map; |
| #endif |
| |
| nir_xfb_info *xfb_info; |
| if (anv_pipeline_has_stage(pipeline, MESA_SHADER_GEOMETRY)) |
| xfb_info = pipeline->shaders[MESA_SHADER_GEOMETRY]->xfb_info; |
| else if (anv_pipeline_has_stage(pipeline, MESA_SHADER_TESS_EVAL)) |
| xfb_info = pipeline->shaders[MESA_SHADER_TESS_EVAL]->xfb_info; |
| else |
| xfb_info = pipeline->shaders[MESA_SHADER_VERTEX]->xfb_info; |
| |
| pipeline->xfb_used = xfb_info ? xfb_info->buffers_written : 0; |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_STREAMOUT), so) { |
| so.RenderingDisable = rs_info->rasterizerDiscardEnable; |
| |
| #if GEN_GEN >= 8 |
| if (xfb_info) { |
| so.SOFunctionEnable = true; |
| so.SOStatisticsEnable = true; |
| |
| const VkPipelineRasterizationStateStreamCreateInfoEXT *stream_info = |
| vk_find_struct_const(rs_info, PIPELINE_RASTERIZATION_STATE_STREAM_CREATE_INFO_EXT); |
| so.RenderStreamSelect = stream_info ? |
| stream_info->rasterizationStream : 0; |
| |
| so.Buffer0SurfacePitch = xfb_info->buffers[0].stride; |
| so.Buffer1SurfacePitch = xfb_info->buffers[1].stride; |
| so.Buffer2SurfacePitch = xfb_info->buffers[2].stride; |
| so.Buffer3SurfacePitch = xfb_info->buffers[3].stride; |
| |
| int urb_entry_read_offset = 0; |
| int urb_entry_read_length = |
| (prog_data->vue_map.num_slots + 1) / 2 - urb_entry_read_offset; |
| |
| /* We always read the whole vertex. This could be reduced at some |
| * point by reading less and offsetting the register index in the |
| * SO_DECLs. |
| */ |
| so.Stream0VertexReadOffset = urb_entry_read_offset; |
| so.Stream0VertexReadLength = urb_entry_read_length - 1; |
| so.Stream1VertexReadOffset = urb_entry_read_offset; |
| so.Stream1VertexReadLength = urb_entry_read_length - 1; |
| so.Stream2VertexReadOffset = urb_entry_read_offset; |
| so.Stream2VertexReadLength = urb_entry_read_length - 1; |
| so.Stream3VertexReadOffset = urb_entry_read_offset; |
| so.Stream3VertexReadLength = urb_entry_read_length - 1; |
| } |
| #endif /* GEN_GEN >= 8 */ |
| } |
| |
| #if GEN_GEN >= 8 |
| if (xfb_info) { |
| struct GENX(SO_DECL) so_decl[MAX_XFB_STREAMS][128]; |
| int next_offset[MAX_XFB_BUFFERS] = {0, 0, 0, 0}; |
| int decls[MAX_XFB_STREAMS] = {0, 0, 0, 0}; |
| |
| memset(so_decl, 0, sizeof(so_decl)); |
| |
| for (unsigned i = 0; i < xfb_info->output_count; i++) { |
| const nir_xfb_output_info *output = &xfb_info->outputs[i]; |
| unsigned buffer = output->buffer; |
| unsigned stream = xfb_info->buffer_to_stream[buffer]; |
| |
| /* Our hardware is unusual in that it requires us to program SO_DECLs |
| * for fake "hole" components, rather than simply taking the offset |
| * for each real varying. Each hole can have size 1, 2, 3, or 4; we |
| * program as many size = 4 holes as we can, then a final hole to |
| * accommodate the final 1, 2, or 3 remaining. |
| */ |
| int hole_dwords = (output->offset - next_offset[buffer]) / 4; |
| while (hole_dwords > 0) { |
| so_decl[stream][decls[stream]++] = (struct GENX(SO_DECL)) { |
| .HoleFlag = 1, |
| .OutputBufferSlot = buffer, |
| .ComponentMask = (1 << MIN2(hole_dwords, 4)) - 1, |
| }; |
| hole_dwords -= 4; |
| } |
| |
| int varying = output->location; |
| uint8_t component_mask = output->component_mask; |
| /* VARYING_SLOT_PSIZ contains three scalar fields packed together: |
| * - VARYING_SLOT_LAYER in VARYING_SLOT_PSIZ.y |
| * - VARYING_SLOT_VIEWPORT in VARYING_SLOT_PSIZ.z |
| * - VARYING_SLOT_PSIZ in VARYING_SLOT_PSIZ.w |
| */ |
| if (varying == VARYING_SLOT_LAYER) { |
| varying = VARYING_SLOT_PSIZ; |
| component_mask = 1 << 1; // SO_DECL_COMPMASK_Y |
| } else if (varying == VARYING_SLOT_VIEWPORT) { |
| varying = VARYING_SLOT_PSIZ; |
| component_mask = 1 << 2; // SO_DECL_COMPMASK_Z |
| } else if (varying == VARYING_SLOT_PSIZ) { |
| component_mask = 1 << 3; // SO_DECL_COMPMASK_W |
| } |
| |
| next_offset[buffer] = output->offset + |
| __builtin_popcount(component_mask) * 4; |
| |
| so_decl[stream][decls[stream]++] = (struct GENX(SO_DECL)) { |
| .OutputBufferSlot = buffer, |
| .RegisterIndex = vue_map->varying_to_slot[varying], |
| .ComponentMask = component_mask, |
| }; |
| } |
| |
| int max_decls = 0; |
| for (unsigned s = 0; s < MAX_XFB_STREAMS; s++) |
| max_decls = MAX2(max_decls, decls[s]); |
| |
| uint8_t sbs[MAX_XFB_STREAMS] = { }; |
| for (unsigned b = 0; b < MAX_XFB_BUFFERS; b++) { |
| if (xfb_info->buffers_written & (1 << b)) |
| sbs[xfb_info->buffer_to_stream[b]] |= 1 << b; |
| } |
| |
| uint32_t *dw = anv_batch_emitn(&pipeline->batch, 3 + 2 * max_decls, |
| GENX(3DSTATE_SO_DECL_LIST), |
| .StreamtoBufferSelects0 = sbs[0], |
| .StreamtoBufferSelects1 = sbs[1], |
| .StreamtoBufferSelects2 = sbs[2], |
| .StreamtoBufferSelects3 = sbs[3], |
| .NumEntries0 = decls[0], |
| .NumEntries1 = decls[1], |
| .NumEntries2 = decls[2], |
| .NumEntries3 = decls[3]); |
| |
| for (int i = 0; i < max_decls; i++) { |
| GENX(SO_DECL_ENTRY_pack)(NULL, dw + 3 + i * 2, |
| &(struct GENX(SO_DECL_ENTRY)) { |
| .Stream0Decl = so_decl[0][i], |
| .Stream1Decl = so_decl[1][i], |
| .Stream2Decl = so_decl[2][i], |
| .Stream3Decl = so_decl[3][i], |
| }); |
| } |
| } |
| #endif /* GEN_GEN >= 8 */ |
| } |
| |
| static uint32_t |
| get_sampler_count(const struct anv_shader_bin *bin) |
| { |
| uint32_t count_by_4 = DIV_ROUND_UP(bin->bind_map.sampler_count, 4); |
| |
| /* We can potentially have way more than 32 samplers and that's ok. |
| * However, the 3DSTATE_XS packets only have 3 bits to specify how |
| * many to pre-fetch and all values above 4 are marked reserved. |
| */ |
| return MIN2(count_by_4, 4); |
| } |
| |
| static uint32_t |
| get_binding_table_entry_count(const struct anv_shader_bin *bin) |
| { |
| return DIV_ROUND_UP(bin->bind_map.surface_count, 32); |
| } |
| |
| static struct anv_address |
| get_scratch_address(struct anv_pipeline *pipeline, |
| gl_shader_stage stage, |
| const struct anv_shader_bin *bin) |
| { |
| return (struct anv_address) { |
| .bo = anv_scratch_pool_alloc(pipeline->device, |
| &pipeline->device->scratch_pool, |
| stage, bin->prog_data->total_scratch), |
| .offset = 0, |
| }; |
| } |
| |
| static uint32_t |
| get_scratch_space(const struct anv_shader_bin *bin) |
| { |
| return ffs(bin->prog_data->total_scratch / 2048); |
| } |
| |
| static void |
| emit_3dstate_vs(struct anv_pipeline *pipeline) |
| { |
| const struct gen_device_info *devinfo = &pipeline->device->info; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| const struct anv_shader_bin *vs_bin = |
| pipeline->shaders[MESA_SHADER_VERTEX]; |
| |
| assert(anv_pipeline_has_stage(pipeline, MESA_SHADER_VERTEX)); |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VS), vs) { |
| vs.Enable = true; |
| vs.StatisticsEnable = true; |
| vs.KernelStartPointer = vs_bin->kernel.offset; |
| #if GEN_GEN >= 8 |
| vs.SIMD8DispatchEnable = |
| vs_prog_data->base.dispatch_mode == DISPATCH_MODE_SIMD8; |
| #endif |
| |
| assert(!vs_prog_data->base.base.use_alt_mode); |
| #if GEN_GEN < 11 |
| vs.SingleVertexDispatch = false; |
| #endif |
| vs.VectorMaskEnable = false; |
| /* WA_1606682166: |
| * Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes. |
| * Disable the Sampler state prefetch functionality in the SARB by |
| * programming 0xB000[30] to '1'. |
| */ |
| vs.SamplerCount = GEN_GEN == 11 ? 0 : get_sampler_count(vs_bin); |
| /* Gen 11 workarounds table #2056 WABTPPrefetchDisable suggests to |
| * disable prefetching of binding tables on A0 and B0 steppings. |
| * TODO: Revisit this WA on newer steppings. |
| */ |
| vs.BindingTableEntryCount = GEN_GEN == 11 ? 0 : get_binding_table_entry_count(vs_bin); |
| vs.FloatingPointMode = IEEE754; |
| vs.IllegalOpcodeExceptionEnable = false; |
| vs.SoftwareExceptionEnable = false; |
| vs.MaximumNumberofThreads = devinfo->max_vs_threads - 1; |
| |
| if (GEN_GEN == 9 && devinfo->gt == 4 && |
| anv_pipeline_has_stage(pipeline, MESA_SHADER_TESS_EVAL)) { |
| /* On Sky Lake GT4, we have experienced some hangs related to the VS |
| * cache and tessellation. It is unknown exactly what is happening |
| * but the Haswell docs for the "VS Reference Count Full Force Miss |
| * Enable" field of the "Thread Mode" register refer to a HSW bug in |
| * which the VUE handle reference count would overflow resulting in |
| * internal reference counting bugs. My (Jason's) best guess is that |
| * this bug cropped back up on SKL GT4 when we suddenly had more |
| * threads in play than any previous gen9 hardware. |
| * |
| * What we do know for sure is that setting this bit when |
| * tessellation shaders are in use fixes a GPU hang in Batman: Arkham |
| * City when playing with DXVK (https://bugs.freedesktop.org/107280). |
| * Disabling the vertex cache with tessellation shaders should only |
| * have a minor performance impact as the tessellation shaders are |
| * likely generating and processing far more geometry than the vertex |
| * stage. |
| */ |
| vs.VertexCacheDisable = true; |
| } |
| |
| vs.VertexURBEntryReadLength = vs_prog_data->base.urb_read_length; |
| vs.VertexURBEntryReadOffset = 0; |
| vs.DispatchGRFStartRegisterForURBData = |
| vs_prog_data->base.base.dispatch_grf_start_reg; |
| |
| #if GEN_GEN >= 8 |
| vs.UserClipDistanceClipTestEnableBitmask = |
| vs_prog_data->base.clip_distance_mask; |
| vs.UserClipDistanceCullTestEnableBitmask = |
| vs_prog_data->base.cull_distance_mask; |
| #endif |
| |
| vs.PerThreadScratchSpace = get_scratch_space(vs_bin); |
| vs.ScratchSpaceBasePointer = |
| get_scratch_address(pipeline, MESA_SHADER_VERTEX, vs_bin); |
| } |
| } |
| |
| static void |
| emit_3dstate_hs_te_ds(struct anv_pipeline *pipeline, |
| const VkPipelineTessellationStateCreateInfo *tess_info) |
| { |
| if (!anv_pipeline_has_stage(pipeline, MESA_SHADER_TESS_EVAL)) { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_HS), hs); |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_TE), te); |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_DS), ds); |
| return; |
| } |
| |
| const struct gen_device_info *devinfo = &pipeline->device->info; |
| const struct anv_shader_bin *tcs_bin = |
| pipeline->shaders[MESA_SHADER_TESS_CTRL]; |
| const struct anv_shader_bin *tes_bin = |
| pipeline->shaders[MESA_SHADER_TESS_EVAL]; |
| |
| const struct brw_tcs_prog_data *tcs_prog_data = get_tcs_prog_data(pipeline); |
| const struct brw_tes_prog_data *tes_prog_data = get_tes_prog_data(pipeline); |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_HS), hs) { |
| hs.Enable = true; |
| hs.StatisticsEnable = true; |
| hs.KernelStartPointer = tcs_bin->kernel.offset; |
| /* WA_1606682166 */ |
| hs.SamplerCount = GEN_GEN == 11 ? 0 : get_sampler_count(tcs_bin); |
| /* Gen 11 workarounds table #2056 WABTPPrefetchDisable */ |
| hs.BindingTableEntryCount = GEN_GEN == 11 ? 0 : get_binding_table_entry_count(tcs_bin); |
| hs.MaximumNumberofThreads = devinfo->max_tcs_threads - 1; |
| hs.IncludeVertexHandles = true; |
| hs.InstanceCount = tcs_prog_data->instances - 1; |
| |
| hs.VertexURBEntryReadLength = 0; |
| hs.VertexURBEntryReadOffset = 0; |
| hs.DispatchGRFStartRegisterForURBData = |
| tcs_prog_data->base.base.dispatch_grf_start_reg; |
| |
| hs.PerThreadScratchSpace = get_scratch_space(tcs_bin); |
| hs.ScratchSpaceBasePointer = |
| get_scratch_address(pipeline, MESA_SHADER_TESS_CTRL, tcs_bin); |
| |
| #if GEN_GEN >= 9 |
| hs.DispatchMode = tcs_prog_data->base.dispatch_mode; |
| hs.IncludePrimitiveID = tcs_prog_data->include_primitive_id; |
| #endif |
| } |
| |
| const VkPipelineTessellationDomainOriginStateCreateInfo *domain_origin_state = |
| tess_info ? vk_find_struct_const(tess_info, PIPELINE_TESSELLATION_DOMAIN_ORIGIN_STATE_CREATE_INFO) : NULL; |
| |
| VkTessellationDomainOrigin uv_origin = |
| domain_origin_state ? domain_origin_state->domainOrigin : |
| VK_TESSELLATION_DOMAIN_ORIGIN_UPPER_LEFT; |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_TE), te) { |
| te.Partitioning = tes_prog_data->partitioning; |
| |
| if (uv_origin == VK_TESSELLATION_DOMAIN_ORIGIN_LOWER_LEFT) { |
| te.OutputTopology = tes_prog_data->output_topology; |
| } else { |
| /* When the origin is upper-left, we have to flip the winding order */ |
| if (tes_prog_data->output_topology == OUTPUT_TRI_CCW) { |
| te.OutputTopology = OUTPUT_TRI_CW; |
| } else if (tes_prog_data->output_topology == OUTPUT_TRI_CW) { |
| te.OutputTopology = OUTPUT_TRI_CCW; |
| } else { |
| te.OutputTopology = tes_prog_data->output_topology; |
| } |
| } |
| |
| te.TEDomain = tes_prog_data->domain; |
| te.TEEnable = true; |
| te.MaximumTessellationFactorOdd = 63.0; |
| te.MaximumTessellationFactorNotOdd = 64.0; |
| } |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_DS), ds) { |
| ds.Enable = true; |
| ds.StatisticsEnable = true; |
| ds.KernelStartPointer = tes_bin->kernel.offset; |
| /* WA_1606682166 */ |
| ds.SamplerCount = GEN_GEN == 11 ? 0 : get_sampler_count(tes_bin); |
| /* Gen 11 workarounds table #2056 WABTPPrefetchDisable */ |
| ds.BindingTableEntryCount = GEN_GEN == 11 ? 0 : get_binding_table_entry_count(tes_bin); |
| ds.MaximumNumberofThreads = devinfo->max_tes_threads - 1; |
| |
| ds.ComputeWCoordinateEnable = |
| tes_prog_data->domain == BRW_TESS_DOMAIN_TRI; |
| |
| ds.PatchURBEntryReadLength = tes_prog_data->base.urb_read_length; |
| ds.PatchURBEntryReadOffset = 0; |
| ds.DispatchGRFStartRegisterForURBData = |
| tes_prog_data->base.base.dispatch_grf_start_reg; |
| |
| #if GEN_GEN >= 8 |
| #if GEN_GEN < 11 |
| ds.DispatchMode = |
| tes_prog_data->base.dispatch_mode == DISPATCH_MODE_SIMD8 ? |
| DISPATCH_MODE_SIMD8_SINGLE_PATCH : |
| DISPATCH_MODE_SIMD4X2; |
| #else |
| assert(tes_prog_data->base.dispatch_mode == DISPATCH_MODE_SIMD8); |
| ds.DispatchMode = DISPATCH_MODE_SIMD8_SINGLE_PATCH; |
| #endif |
| |
| ds.UserClipDistanceClipTestEnableBitmask = |
| tes_prog_data->base.clip_distance_mask; |
| ds.UserClipDistanceCullTestEnableBitmask = |
| tes_prog_data->base.cull_distance_mask; |
| #endif |
| |
| ds.PerThreadScratchSpace = get_scratch_space(tes_bin); |
| ds.ScratchSpaceBasePointer = |
| get_scratch_address(pipeline, MESA_SHADER_TESS_EVAL, tes_bin); |
| } |
| } |
| |
| static void |
| emit_3dstate_gs(struct anv_pipeline *pipeline) |
| { |
| const struct gen_device_info *devinfo = &pipeline->device->info; |
| const struct anv_shader_bin *gs_bin = |
| pipeline->shaders[MESA_SHADER_GEOMETRY]; |
| |
| if (!anv_pipeline_has_stage(pipeline, MESA_SHADER_GEOMETRY)) { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_GS), gs); |
| return; |
| } |
| |
| const struct brw_gs_prog_data *gs_prog_data = get_gs_prog_data(pipeline); |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_GS), gs) { |
| gs.Enable = true; |
| gs.StatisticsEnable = true; |
| gs.KernelStartPointer = gs_bin->kernel.offset; |
| gs.DispatchMode = gs_prog_data->base.dispatch_mode; |
| |
| gs.SingleProgramFlow = false; |
| gs.VectorMaskEnable = false; |
| /* WA_1606682166 */ |
| gs.SamplerCount = GEN_GEN == 11 ? 0 : get_sampler_count(gs_bin); |
| /* Gen 11 workarounds table #2056 WABTPPrefetchDisable */ |
| gs.BindingTableEntryCount = GEN_GEN == 11 ? 0 : get_binding_table_entry_count(gs_bin); |
| gs.IncludeVertexHandles = gs_prog_data->base.include_vue_handles; |
| gs.IncludePrimitiveID = gs_prog_data->include_primitive_id; |
| |
| if (GEN_GEN == 8) { |
| /* Broadwell is weird. It needs us to divide by 2. */ |
| gs.MaximumNumberofThreads = devinfo->max_gs_threads / 2 - 1; |
| } else { |
| gs.MaximumNumberofThreads = devinfo->max_gs_threads - 1; |
| } |
| |
| gs.OutputVertexSize = gs_prog_data->output_vertex_size_hwords * 2 - 1; |
| gs.OutputTopology = gs_prog_data->output_topology; |
| gs.VertexURBEntryReadLength = gs_prog_data->base.urb_read_length; |
| gs.ControlDataFormat = gs_prog_data->control_data_format; |
| gs.ControlDataHeaderSize = gs_prog_data->control_data_header_size_hwords; |
| gs.InstanceControl = MAX2(gs_prog_data->invocations, 1) - 1; |
| gs.ReorderMode = TRAILING; |
| |
| #if GEN_GEN >= 8 |
| gs.ExpectedVertexCount = gs_prog_data->vertices_in; |
| gs.StaticOutput = gs_prog_data->static_vertex_count >= 0; |
| gs.StaticOutputVertexCount = gs_prog_data->static_vertex_count >= 0 ? |
| gs_prog_data->static_vertex_count : 0; |
| #endif |
| |
| gs.VertexURBEntryReadOffset = 0; |
| gs.VertexURBEntryReadLength = gs_prog_data->base.urb_read_length; |
| gs.DispatchGRFStartRegisterForURBData = |
| gs_prog_data->base.base.dispatch_grf_start_reg; |
| |
| #if GEN_GEN >= 8 |
| gs.UserClipDistanceClipTestEnableBitmask = |
| gs_prog_data->base.clip_distance_mask; |
| gs.UserClipDistanceCullTestEnableBitmask = |
| gs_prog_data->base.cull_distance_mask; |
| #endif |
| |
| gs.PerThreadScratchSpace = get_scratch_space(gs_bin); |
| gs.ScratchSpaceBasePointer = |
| get_scratch_address(pipeline, MESA_SHADER_GEOMETRY, gs_bin); |
| } |
| } |
| |
| static bool |
| has_color_buffer_write_enabled(const struct anv_pipeline *pipeline, |
| const VkPipelineColorBlendStateCreateInfo *blend) |
| { |
| const struct anv_shader_bin *shader_bin = |
| pipeline->shaders[MESA_SHADER_FRAGMENT]; |
| if (!shader_bin) |
| return false; |
| |
| const struct anv_pipeline_bind_map *bind_map = &shader_bin->bind_map; |
| for (int i = 0; i < bind_map->surface_count; i++) { |
| struct anv_pipeline_binding *binding = &bind_map->surface_to_descriptor[i]; |
| |
| if (binding->set != ANV_DESCRIPTOR_SET_COLOR_ATTACHMENTS) |
| continue; |
| |
| if (binding->index == UINT32_MAX) |
| continue; |
| |
| if (blend && blend->pAttachments[binding->index].colorWriteMask != 0) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void |
| emit_3dstate_wm(struct anv_pipeline *pipeline, struct anv_subpass *subpass, |
| const VkPipelineInputAssemblyStateCreateInfo *ia, |
| const VkPipelineRasterizationStateCreateInfo *raster, |
| const VkPipelineColorBlendStateCreateInfo *blend, |
| const VkPipelineMultisampleStateCreateInfo *multisample, |
| const VkPipelineRasterizationLineStateCreateInfoEXT *line) |
| { |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_WM), wm) { |
| wm.StatisticsEnable = true; |
| wm.LineEndCapAntialiasingRegionWidth = _05pixels; |
| wm.LineAntialiasingRegionWidth = _10pixels; |
| wm.PointRasterizationRule = RASTRULE_UPPER_RIGHT; |
| |
| if (anv_pipeline_has_stage(pipeline, MESA_SHADER_FRAGMENT)) { |
| if (wm_prog_data->early_fragment_tests) { |
| wm.EarlyDepthStencilControl = EDSC_PREPS; |
| } else if (wm_prog_data->has_side_effects) { |
| wm.EarlyDepthStencilControl = EDSC_PSEXEC; |
| } else { |
| wm.EarlyDepthStencilControl = EDSC_NORMAL; |
| } |
| |
| #if GEN_GEN >= 8 |
| /* Gen8 hardware tries to compute ThreadDispatchEnable for us but |
| * doesn't take into account KillPixels when no depth or stencil |
| * writes are enabled. In order for occlusion queries to work |
| * correctly with no attachments, we need to force-enable PS thread |
| * dispatch. |
| * |
| * The BDW docs are pretty clear that that this bit isn't validated |
| * and probably shouldn't be used in production: |
| * |
| * "This must always be set to Normal. This field should not be |
| * tested for functional validation." |
| * |
| * Unfortunately, however, the other mechanism we have for doing this |
| * is 3DSTATE_PS_EXTRA::PixelShaderHasUAV which causes hangs on BDW. |
| * Given two bad options, we choose the one which works. |
| */ |
| if ((wm_prog_data->has_side_effects || wm_prog_data->uses_kill) && |
| !has_color_buffer_write_enabled(pipeline, blend)) |
| wm.ForceThreadDispatchEnable = ForceON; |
| #endif |
| |
| wm.BarycentricInterpolationMode = |
| wm_prog_data->barycentric_interp_modes; |
| |
| #if GEN_GEN < 8 |
| wm.PixelShaderComputedDepthMode = wm_prog_data->computed_depth_mode; |
| wm.PixelShaderUsesSourceDepth = wm_prog_data->uses_src_depth; |
| wm.PixelShaderUsesSourceW = wm_prog_data->uses_src_w; |
| wm.PixelShaderUsesInputCoverageMask = wm_prog_data->uses_sample_mask; |
| |
| /* If the subpass has a depth or stencil self-dependency, then we |
| * need to force the hardware to do the depth/stencil write *after* |
| * fragment shader execution. Otherwise, the writes may hit memory |
| * before we get around to fetching from the input attachment and we |
| * may get the depth or stencil value from the current draw rather |
| * than the previous one. |
| */ |
| wm.PixelShaderKillsPixel = subpass->has_ds_self_dep || |
| wm_prog_data->uses_kill; |
| |
| if (wm.PixelShaderComputedDepthMode != PSCDEPTH_OFF || |
| wm_prog_data->has_side_effects || |
| wm.PixelShaderKillsPixel || |
| has_color_buffer_write_enabled(pipeline, blend)) |
| wm.ThreadDispatchEnable = true; |
| |
| if (multisample && multisample->rasterizationSamples > 1) { |
| if (wm_prog_data->persample_dispatch) { |
| wm.MultisampleDispatchMode = MSDISPMODE_PERSAMPLE; |
| } else { |
| wm.MultisampleDispatchMode = MSDISPMODE_PERPIXEL; |
| } |
| } else { |
| wm.MultisampleDispatchMode = MSDISPMODE_PERSAMPLE; |
| } |
| wm.MultisampleRasterizationMode = |
| gen7_ms_rast_mode(pipeline, ia, raster, multisample); |
| #endif |
| |
| wm.LineStippleEnable = line && line->stippledLineEnable; |
| } |
| } |
| } |
| |
| static void |
| emit_3dstate_ps(struct anv_pipeline *pipeline, |
| const VkPipelineColorBlendStateCreateInfo *blend, |
| const VkPipelineMultisampleStateCreateInfo *multisample) |
| { |
| UNUSED const struct gen_device_info *devinfo = &pipeline->device->info; |
| const struct anv_shader_bin *fs_bin = |
| pipeline->shaders[MESA_SHADER_FRAGMENT]; |
| |
| if (!anv_pipeline_has_stage(pipeline, MESA_SHADER_FRAGMENT)) { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_PS), ps) { |
| #if GEN_GEN == 7 |
| /* Even if no fragments are ever dispatched, gen7 hardware hangs if |
| * we don't at least set the maximum number of threads. |
| */ |
| ps.MaximumNumberofThreads = devinfo->max_wm_threads - 1; |
| #endif |
| } |
| return; |
| } |
| |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| |
| #if GEN_GEN < 8 |
| /* The hardware wedges if you have this bit set but don't turn on any dual |
| * source blend factors. |
| */ |
| bool dual_src_blend = false; |
| if (wm_prog_data->dual_src_blend && blend) { |
| for (uint32_t i = 0; i < blend->attachmentCount; i++) { |
| const VkPipelineColorBlendAttachmentState *bstate = |
| &blend->pAttachments[i]; |
| |
| if (bstate->blendEnable && |
| (is_dual_src_blend_factor(bstate->srcColorBlendFactor) || |
| is_dual_src_blend_factor(bstate->dstColorBlendFactor) || |
| is_dual_src_blend_factor(bstate->srcAlphaBlendFactor) || |
| is_dual_src_blend_factor(bstate->dstAlphaBlendFactor))) { |
| dual_src_blend = true; |
| break; |
| } |
| } |
| } |
| #endif |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_PS), ps) { |
| ps._8PixelDispatchEnable = wm_prog_data->dispatch_8; |
| ps._16PixelDispatchEnable = wm_prog_data->dispatch_16; |
| ps._32PixelDispatchEnable = wm_prog_data->dispatch_32; |
| |
| /* From the Sky Lake PRM 3DSTATE_PS::32 Pixel Dispatch Enable: |
| * |
| * "When NUM_MULTISAMPLES = 16 or FORCE_SAMPLE_COUNT = 16, SIMD32 |
| * Dispatch must not be enabled for PER_PIXEL dispatch mode." |
| * |
| * Since 16x MSAA is first introduced on SKL, we don't need to apply |
| * the workaround on any older hardware. |
| */ |
| if (GEN_GEN >= 9 && !wm_prog_data->persample_dispatch && |
| multisample && multisample->rasterizationSamples == 16) { |
| assert(ps._8PixelDispatchEnable || ps._16PixelDispatchEnable); |
| ps._32PixelDispatchEnable = false; |
| } |
| |
| ps.KernelStartPointer0 = fs_bin->kernel.offset + |
| brw_wm_prog_data_prog_offset(wm_prog_data, ps, 0); |
| ps.KernelStartPointer1 = fs_bin->kernel.offset + |
| brw_wm_prog_data_prog_offset(wm_prog_data, ps, 1); |
| ps.KernelStartPointer2 = fs_bin->kernel.offset + |
| brw_wm_prog_data_prog_offset(wm_prog_data, ps, 2); |
| |
| ps.SingleProgramFlow = false; |
| ps.VectorMaskEnable = GEN_GEN >= 8; |
| /* WA_1606682166 */ |
| ps.SamplerCount = GEN_GEN == 11 ? 0 : get_sampler_count(fs_bin); |
| /* Gen 11 workarounds table #2056 WABTPPrefetchDisable */ |
| ps.BindingTableEntryCount = GEN_GEN == 11 ? 0 : get_binding_table_entry_count(fs_bin); |
| ps.PushConstantEnable = wm_prog_data->base.nr_params > 0 || |
| wm_prog_data->base.ubo_ranges[0].length; |
| ps.PositionXYOffsetSelect = wm_prog_data->uses_pos_offset ? |
| POSOFFSET_SAMPLE: POSOFFSET_NONE; |
| #if GEN_GEN < 8 |
| ps.AttributeEnable = wm_prog_data->num_varying_inputs > 0; |
| ps.oMaskPresenttoRenderTarget = wm_prog_data->uses_omask; |
| ps.DualSourceBlendEnable = dual_src_blend; |
| #endif |
| |
| #if GEN_IS_HASWELL |
| /* Haswell requires the sample mask to be set in this packet as well |
| * as in 3DSTATE_SAMPLE_MASK; the values should match. |
| */ |
| ps.SampleMask = 0xff; |
| #endif |
| |
| #if GEN_GEN >= 9 |
| ps.MaximumNumberofThreadsPerPSD = 64 - 1; |
| #elif GEN_GEN >= 8 |
| ps.MaximumNumberofThreadsPerPSD = 64 - 2; |
| #else |
| ps.MaximumNumberofThreads = devinfo->max_wm_threads - 1; |
| #endif |
| |
| ps.DispatchGRFStartRegisterForConstantSetupData0 = |
| brw_wm_prog_data_dispatch_grf_start_reg(wm_prog_data, ps, 0); |
| ps.DispatchGRFStartRegisterForConstantSetupData1 = |
| brw_wm_prog_data_dispatch_grf_start_reg(wm_prog_data, ps, 1); |
| ps.DispatchGRFStartRegisterForConstantSetupData2 = |
| brw_wm_prog_data_dispatch_grf_start_reg(wm_prog_data, ps, 2); |
| |
| ps.PerThreadScratchSpace = get_scratch_space(fs_bin); |
| ps.ScratchSpaceBasePointer = |
| get_scratch_address(pipeline, MESA_SHADER_FRAGMENT, fs_bin); |
| } |
| } |
| |
| #if GEN_GEN >= 8 |
| static void |
| emit_3dstate_ps_extra(struct anv_pipeline *pipeline, |
| struct anv_subpass *subpass, |
| const VkPipelineColorBlendStateCreateInfo *blend) |
| { |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| |
| if (!anv_pipeline_has_stage(pipeline, MESA_SHADER_FRAGMENT)) { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_PS_EXTRA), ps); |
| return; |
| } |
| |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_PS_EXTRA), ps) { |
| ps.PixelShaderValid = true; |
| ps.AttributeEnable = wm_prog_data->num_varying_inputs > 0; |
| ps.oMaskPresenttoRenderTarget = wm_prog_data->uses_omask; |
| ps.PixelShaderIsPerSample = wm_prog_data->persample_dispatch; |
| ps.PixelShaderComputedDepthMode = wm_prog_data->computed_depth_mode; |
| ps.PixelShaderUsesSourceDepth = wm_prog_data->uses_src_depth; |
| ps.PixelShaderUsesSourceW = wm_prog_data->uses_src_w; |
| |
| /* If the subpass has a depth or stencil self-dependency, then we need |
| * to force the hardware to do the depth/stencil write *after* fragment |
| * shader execution. Otherwise, the writes may hit memory before we get |
| * around to fetching from the input attachment and we may get the depth |
| * or stencil value from the current draw rather than the previous one. |
| */ |
| ps.PixelShaderKillsPixel = subpass->has_ds_self_dep || |
| wm_prog_data->uses_kill; |
| |
| #if GEN_GEN >= 9 |
| ps.PixelShaderComputesStencil = wm_prog_data->computed_stencil; |
| ps.PixelShaderPullsBary = wm_prog_data->pulls_bary; |
| |
| ps.InputCoverageMaskState = ICMS_NONE; |
| if (wm_prog_data->uses_sample_mask) { |
| if (wm_prog_data->post_depth_coverage) |
| ps.InputCoverageMaskState = ICMS_DEPTH_COVERAGE; |
| else |
| ps.InputCoverageMaskState = ICMS_INNER_CONSERVATIVE; |
| } |
| #else |
| ps.PixelShaderUsesInputCoverageMask = wm_prog_data->uses_sample_mask; |
| #endif |
| } |
| } |
| |
| static void |
| emit_3dstate_vf_topology(struct anv_pipeline *pipeline) |
| { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VF_TOPOLOGY), vft) { |
| vft.PrimitiveTopologyType = pipeline->topology; |
| } |
| } |
| #endif |
| |
| static void |
| emit_3dstate_vf_statistics(struct anv_pipeline *pipeline) |
| { |
| anv_batch_emit(&pipeline->batch, GENX(3DSTATE_VF_STATISTICS), vfs) { |
| vfs.StatisticsEnable = true; |
| } |
| } |
| |
| static void |
| compute_kill_pixel(struct anv_pipeline *pipeline, |
| const VkPipelineMultisampleStateCreateInfo *ms_info, |
| const struct anv_subpass *subpass) |
| { |
| if (!anv_pipeline_has_stage(pipeline, MESA_SHADER_FRAGMENT)) { |
| pipeline->kill_pixel = false; |
| return; |
| } |
| |
| const struct brw_wm_prog_data *wm_prog_data = get_wm_prog_data(pipeline); |
| |
| /* This computes the KillPixel portion of the computation for whether or |
| * not we want to enable the PMA fix on gen8 or gen9. It's given by this |
| * chunk of the giant formula: |
| * |
| * (3DSTATE_PS_EXTRA::PixelShaderKillsPixels || |
| * 3DSTATE_PS_EXTRA::oMask Present to RenderTarget || |
| * 3DSTATE_PS_BLEND::AlphaToCoverageEnable || |
| * 3DSTATE_PS_BLEND::AlphaTestEnable || |
| * 3DSTATE_WM_CHROMAKEY::ChromaKeyKillEnable) |
| * |
| * 3DSTATE_WM_CHROMAKEY::ChromaKeyKillEnable is always false and so is |
| * 3DSTATE_PS_BLEND::AlphaTestEnable since Vulkan doesn't have a concept |
| * of an alpha test. |
| */ |
| pipeline->kill_pixel = |
| subpass->has_ds_self_dep || wm_prog_data->uses_kill || |
| wm_prog_data->uses_omask || |
| (ms_info && ms_info->alphaToCoverageEnable); |
| } |
| |
| static VkResult |
| genX(graphics_pipeline_create)( |
| VkDevice _device, |
| struct anv_pipeline_cache * cache, |
| const VkGraphicsPipelineCreateInfo* pCreateInfo, |
| const VkAllocationCallbacks* pAllocator, |
| VkPipeline* pPipeline) |
| { |
| ANV_FROM_HANDLE(anv_device, device, _device); |
| ANV_FROM_HANDLE(anv_render_pass, pass, pCreateInfo->renderPass); |
| struct anv_subpass *subpass = &pass->subpasses[pCreateInfo->subpass]; |
| struct anv_pipeline *pipeline; |
| VkResult result; |
| |
| assert(pCreateInfo->sType == VK_STRUCTURE_TYPE_GRAPHICS_PIPELINE_CREATE_INFO); |
| |
| /* Use the default pipeline cache if none is specified */ |
| if (cache == NULL && device->instance->pipeline_cache_enabled) |
| cache = &device->default_pipeline_cache; |
| |
| pipeline = vk_alloc2(&device->alloc, pAllocator, sizeof(*pipeline), 8, |
| VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); |
| if (pipeline == NULL) |
| return vk_error(VK_ERROR_OUT_OF_HOST_MEMORY); |
| |
| result = anv_pipeline_init(pipeline, device, cache, |
| pCreateInfo, pAllocator); |
| if (result != VK_SUCCESS) { |
| vk_free2(&device->alloc, pAllocator, pipeline); |
| return result; |
| } |
| |
| const VkPipelineRasterizationLineStateCreateInfoEXT *line_info = |
| vk_find_struct_const(pCreateInfo->pRasterizationState->pNext, |
| PIPELINE_RASTERIZATION_LINE_STATE_CREATE_INFO_EXT); |
| |
| assert(pCreateInfo->pVertexInputState); |
| emit_vertex_input(pipeline, pCreateInfo->pVertexInputState); |
| assert(pCreateInfo->pRasterizationState); |
| emit_rs_state(pipeline, pCreateInfo->pInputAssemblyState, |
| pCreateInfo->pRasterizationState, |
| pCreateInfo->pMultisampleState, |
| line_info, pass, subpass); |
| emit_ms_state(pipeline, pCreateInfo->pMultisampleState); |
| emit_ds_state(pipeline, pCreateInfo->pDepthStencilState, pass, subpass); |
| emit_cb_state(pipeline, pCreateInfo->pColorBlendState, |
| pCreateInfo->pMultisampleState); |
| compute_kill_pixel(pipeline, pCreateInfo->pMultisampleState, subpass); |
| |
| emit_urb_setup(pipeline); |
| |
| emit_3dstate_clip(pipeline, |
| pCreateInfo->pInputAssemblyState, |
| pCreateInfo->pViewportState, |
| pCreateInfo->pRasterizationState); |
| emit_3dstate_streamout(pipeline, pCreateInfo->pRasterizationState); |
| |
| #if 0 |
| /* From gen7_vs_state.c */ |
| |
| /** |
| * From Graphics BSpec: 3D-Media-GPGPU Engine > 3D Pipeline Stages > |
| * Geometry > Geometry Shader > State: |
| * |
| * "Note: Because of corruption in IVB:GT2, software needs to flush the |
| * whole fixed function pipeline when the GS enable changes value in |
| * the 3DSTATE_GS." |
| * |
| * The hardware architects have clarified that in this context "flush the |
| * whole fixed function pipeline" means to emit a PIPE_CONTROL with the "CS |
| * Stall" bit set. |
| */ |
| if (!device->info.is_haswell && !device->info.is_baytrail) |
| gen7_emit_vs_workaround_flush(brw); |
| #endif |
| |
| emit_3dstate_vs(pipeline); |
| emit_3dstate_hs_te_ds(pipeline, pCreateInfo->pTessellationState); |
| emit_3dstate_gs(pipeline); |
| emit_3dstate_sbe(pipeline); |
| emit_3dstate_wm(pipeline, subpass, |
| pCreateInfo->pInputAssemblyState, |
| pCreateInfo->pRasterizationState, |
| pCreateInfo->pColorBlendState, |
| pCreateInfo->pMultisampleState, line_info); |
| emit_3dstate_ps(pipeline, pCreateInfo->pColorBlendState, |
| pCreateInfo->pMultisampleState); |
| #if GEN_GEN >= 8 |
| emit_3dstate_ps_extra(pipeline, subpass, pCreateInfo->pColorBlendState); |
| emit_3dstate_vf_topology(pipeline); |
| #endif |
| emit_3dstate_vf_statistics(pipeline); |
| |
| *pPipeline = anv_pipeline_to_handle(pipeline); |
| |
| return pipeline->batch.status; |
| } |
| |
| static VkResult |
| compute_pipeline_create( |
| VkDevice _device, |
| struct anv_pipeline_cache * cache, |
| const VkComputePipelineCreateInfo* pCreateInfo, |
| const VkAllocationCallbacks* pAllocator, |
| VkPipeline* pPipeline) |
| { |
| ANV_FROM_HANDLE(anv_device, device, _device); |
| const struct anv_physical_device *physical_device = |
| &device->instance->physicalDevice; |
| const struct gen_device_info *devinfo = &physical_device->info; |
| struct anv_pipeline *pipeline; |
| VkResult result; |
| |
| assert(pCreateInfo->sType == VK_STRUCTURE_TYPE_COMPUTE_PIPELINE_CREATE_INFO); |
| |
| /* Use the default pipeline cache if none is specified */ |
| if (cache == NULL && device->instance->pipeline_cache_enabled) |
| cache = &device->default_pipeline_cache; |
| |
| pipeline = vk_alloc2(&device->alloc, pAllocator, sizeof(*pipeline), 8, |
| VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); |
| if (pipeline == NULL) |
| return vk_error(VK_ERROR_OUT_OF_HOST_MEMORY); |
| |
| pipeline->device = device; |
| |
| pipeline->blend_state.map = NULL; |
| |
| result = anv_reloc_list_init(&pipeline->batch_relocs, |
| pAllocator ? pAllocator : &device->alloc); |
| if (result != VK_SUCCESS) { |
| vk_free2(&device->alloc, pAllocator, pipeline); |
| return result; |
| } |
| pipeline->batch.next = pipeline->batch.start = pipeline->batch_data; |
| pipeline->batch.end = pipeline->batch.start + sizeof(pipeline->batch_data); |
| pipeline->batch.relocs = &pipeline->batch_relocs; |
| pipeline->batch.status = VK_SUCCESS; |
| |
| pipeline->mem_ctx = ralloc_context(NULL); |
| pipeline->flags = pCreateInfo->flags; |
| |
| /* When we free the pipeline, we detect stages based on the NULL status |
| * of various prog_data pointers. Make them NULL by default. |
| */ |
| memset(pipeline->shaders, 0, sizeof(pipeline->shaders)); |
| pipeline->num_executables = 0; |
| |
| pipeline->needs_data_cache = false; |
| |
| assert(pCreateInfo->stage.stage == VK_SHADER_STAGE_COMPUTE_BIT); |
| pipeline->active_stages |= VK_SHADER_STAGE_COMPUTE_BIT; |
| ANV_FROM_HANDLE(anv_shader_module, module, pCreateInfo->stage.module); |
| result = anv_pipeline_compile_cs(pipeline, cache, pCreateInfo, module, |
| pCreateInfo->stage.pName, |
| pCreateInfo->stage.pSpecializationInfo); |
| if (result != VK_SUCCESS) { |
| ralloc_free(pipeline->mem_ctx); |
| vk_free2(&device->alloc, pAllocator, pipeline); |
| return result; |
| } |
| |
| const struct brw_cs_prog_data *cs_prog_data = get_cs_prog_data(pipeline); |
| |
| anv_pipeline_setup_l3_config(pipeline, cs_prog_data->base.total_shared > 0); |
| |
| uint32_t group_size = cs_prog_data->local_size[0] * |
| cs_prog_data->local_size[1] * cs_prog_data->local_size[2]; |
| uint32_t remainder = group_size & (cs_prog_data->simd_size - 1); |
| |
| if (remainder > 0) |
| pipeline->cs_right_mask = ~0u >> (32 - remainder); |
| else |
| pipeline->cs_right_mask = ~0u >> (32 - cs_prog_data->simd_size); |
| |
| const uint32_t vfe_curbe_allocation = |
| ALIGN(cs_prog_data->push.per_thread.regs * cs_prog_data->threads + |
| cs_prog_data->push.cross_thread.regs, 2); |
| |
| const uint32_t subslices = MAX2(physical_device->subslice_total, 1); |
| |
| const struct anv_shader_bin *cs_bin = |
| pipeline->shaders[MESA_SHADER_COMPUTE]; |
| |
| anv_batch_emit(&pipeline->batch, GENX(MEDIA_VFE_STATE), vfe) { |
| #if GEN_GEN > 7 |
| vfe.StackSize = 0; |
| #else |
| vfe.GPGPUMode = true; |
| #endif |
| vfe.MaximumNumberofThreads = |
| devinfo->max_cs_threads * subslices - 1; |
| vfe.NumberofURBEntries = GEN_GEN <= 7 ? 0 : 2; |
| #if GEN_GEN < 11 |
| vfe.ResetGatewayTimer = true; |
| #endif |
| #if GEN_GEN <= 8 |
| vfe.BypassGatewayControl = true; |
| #endif |
| vfe.URBEntryAllocationSize = GEN_GEN <= 7 ? 0 : 2; |
| vfe.CURBEAllocationSize = vfe_curbe_allocation; |
| |
| if (cs_bin->prog_data->total_scratch) { |
| if (GEN_GEN >= 8) { |
| /* Broadwell's Per Thread Scratch Space is in the range [0, 11] |
| * where 0 = 1k, 1 = 2k, 2 = 4k, ..., 11 = 2M. |
| */ |
| vfe.PerThreadScratchSpace = |
| ffs(cs_bin->prog_data->total_scratch) - 11; |
| } else if (GEN_IS_HASWELL) { |
| /* Haswell's Per Thread Scratch Space is in the range [0, 10] |
| * where 0 = 2k, 1 = 4k, 2 = 8k, ..., 10 = 2M. |
| */ |
| vfe.PerThreadScratchSpace = |
| ffs(cs_bin->prog_data->total_scratch) - 12; |
| } else { |
| /* IVB and BYT use the range [0, 11] to mean [1kB, 12kB] |
| * where 0 = 1kB, 1 = 2kB, 2 = 3kB, ..., 11 = 12kB. |
| */ |
| vfe.PerThreadScratchSpace = |
| cs_bin->prog_data->total_scratch / 1024 - 1; |
| } |
| vfe.ScratchSpaceBasePointer = |
| get_scratch_address(pipeline, MESA_SHADER_COMPUTE, cs_bin); |
| } |
| } |
| |
| struct GENX(INTERFACE_DESCRIPTOR_DATA) desc = { |
| .KernelStartPointer = cs_bin->kernel.offset, |
| /* WA_1606682166 */ |
| .SamplerCount = GEN_GEN == 11 ? 0 : get_sampler_count(cs_bin), |
| /* Gen 11 workarounds table #2056 WABTPPrefetchDisable |
| * |
| * We add 1 because the CS indirect parameters buffer isn't accounted |
| * for in bind_map.surface_count. |
| */ |
| .BindingTableEntryCount = GEN_GEN == 11 ? 0 : 1 + MIN2(cs_bin->bind_map.surface_count, 30), |
| .BarrierEnable = cs_prog_data->uses_barrier, |
| .SharedLocalMemorySize = |
| encode_slm_size(GEN_GEN, cs_prog_data->base.total_shared), |
| |
| #if !GEN_IS_HASWELL |
| .ConstantURBEntryReadOffset = 0, |
| #endif |
| .ConstantURBEntryReadLength = cs_prog_data->push.per_thread.regs, |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| .CrossThreadConstantDataReadLength = |
| cs_prog_data->push.cross_thread.regs, |
| #endif |
| |
| .NumberofThreadsinGPGPUThreadGroup = cs_prog_data->threads, |
| }; |
| GENX(INTERFACE_DESCRIPTOR_DATA_pack)(NULL, |
| pipeline->interface_descriptor_data, |
| &desc); |
| |
| *pPipeline = anv_pipeline_to_handle(pipeline); |
| |
| return pipeline->batch.status; |
| } |
| |
| VkResult genX(CreateGraphicsPipelines)( |
| VkDevice _device, |
| VkPipelineCache pipelineCache, |
| uint32_t count, |
| const VkGraphicsPipelineCreateInfo* pCreateInfos, |
| const VkAllocationCallbacks* pAllocator, |
| VkPipeline* pPipelines) |
| { |
| ANV_FROM_HANDLE(anv_pipeline_cache, pipeline_cache, pipelineCache); |
| |
| VkResult result = VK_SUCCESS; |
| |
| unsigned i; |
| for (i = 0; i < count; i++) { |
| result = genX(graphics_pipeline_create)(_device, |
| pipeline_cache, |
| &pCreateInfos[i], |
| pAllocator, &pPipelines[i]); |
| |
| /* Bail out on the first error as it is not obvious what error should be |
| * report upon 2 different failures. */ |
| if (result != VK_SUCCESS) |
| break; |
| } |
| |
| for (; i < count; i++) |
| pPipelines[i] = VK_NULL_HANDLE; |
| |
| return result; |
| } |
| |
| VkResult genX(CreateComputePipelines)( |
| VkDevice _device, |
| VkPipelineCache pipelineCache, |
| uint32_t count, |
| const VkComputePipelineCreateInfo* pCreateInfos, |
| const VkAllocationCallbacks* pAllocator, |
| VkPipeline* pPipelines) |
| { |
| ANV_FROM_HANDLE(anv_pipeline_cache, pipeline_cache, pipelineCache); |
| |
| VkResult result = VK_SUCCESS; |
| |
| unsigned i; |
| for (i = 0; i < count; i++) { |
| result = compute_pipeline_create(_device, pipeline_cache, |
| &pCreateInfos[i], |
| pAllocator, &pPipelines[i]); |
| |
| /* Bail out on the first error as it is not obvious what error should be |
| * report upon 2 different failures. */ |
| if (result != VK_SUCCESS) |
| break; |
| } |
| |
| for (; i < count; i++) |
| pPipelines[i] = VK_NULL_HANDLE; |
| |
| return result; |
| } |