MdePkg/Include/Protocol/SpiNorFlash.h - third_party/edk2 - Git at Google

 /** @file
   This file defines the SPI NOR Flash Protocol.

   Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD
   License which accompanies this distribution. The full text of the license may
   be found at http://opensource.org/licenses/bsd-license.php

   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

   @par Revision Reference:
     This Protocol was introduced in UEFI PI Specification 1.6.

 **/

 #ifndef __SPI_NOR_FLASH_PROTOCOL_H__
 #define __SPI_NOR_FLASH_PROTOCOL_H__

 #include <Protocol/SpiConfiguration.h>

 ///
 /// Global ID for the SPI NOR Flash Protocol
 ///
 #define EFI_SPI_NOR_FLASH_PROTOCOL_GUID  \
   { 0xb57ec3fe, 0xf833, 0x4ba6,          \
     { 0x85, 0x78, 0x2a, 0x7d, 0x6a, 0x87, 0x44, 0x4b }}

 typedef struct _EFI_SPI_NOR_FLASH_PROTOCOL EFI_SPI_NOR_FLASH_PROTOCOL;

 /**
   Read the 3 byte manufacture and device ID from the SPI flash.

   This routine must be called at or below TPL_NOTIFY.
   This routine reads the 3 byte manufacture and device ID from the flash part
   filling the buffer provided.

   @param[in]  This    Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data structure.
   @param[out] Buffer  Pointer to a 3 byte buffer to receive the manufacture and
                       device ID.


   @retval EFI_SUCCESS            The manufacture and device ID was read
                                  successfully.
   @retval EFI_INVALID_PARAMETER  Buffer is NULL
   @retval EFI_DEVICE_ERROR       Invalid data received from SPI flash part.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_GET_FLASH_ID) (
   IN  CONST EFI_SPI_NOR_FLASH_PROTOCOL  *This,
   OUT UINT8                             *Buffer
   );

 /**
   Read data from the SPI flash.

   This routine must be called at or below TPL_NOTIFY.
   This routine reads data from the SPI part in the buffer provided.

   @param[in]  This           Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
                              structure.
   @param[in]  FlashAddress   Address in the flash to start reading
   @param[in]  LengthInBytes  Read length in bytes
   @param[out] Buffer         Address of a buffer to receive the data

   @retval EFI_SUCCESS            The data was read successfully.
   @retval EFI_INVALID_PARAMETER  Buffer is NULL, or
                                  FlashAddress >= This->FlashSize, or
                                  LengthInBytes > This->FlashSize - FlashAddress

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA) (
   IN  CONST EFI_SPI_NOR_FLASH_PROTOCOL  *This,
   IN  UINT32                            FlashAddress,
   IN  UINT32                            LengthInBytes,
   OUT UINT8                             *Buffer
   );

 /**
   Read the flash status register.

   This routine must be called at or below TPL_NOTIFY.
   This routine reads the flash part status register.

   @param[in]  This           Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
                              structure.
   @param[in]  LengthInBytes  Number of status bytes to read.
   @param[out] FlashStatus    Pointer to a buffer to receive the flash status.

   @retval EFI_SUCCESS  The status register was read successfully.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_READ_STATUS) (
   IN  CONST EFI_SPI_NOR_FLASH_PROTOCOL  *This,
   IN  UINT32                            LengthInBytes,
   OUT UINT8                             *FlashStatus
   );

 /**
   Write the flash status register.

   This routine must be called at or below TPL_N OTIFY.
   This routine writes the flash part status register.

   @param[in] This           Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
                             structure.
   @param[in] LengthInBytes  Number of status bytes to write.
   @param[in] FlashStatus    Pointer to a buffer containing the new status.

   @retval EFI_SUCCESS           The status write was successful.
   @retval EFI_OUT_OF_RESOURCES  Failed to allocate the write buffer.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_STATUS) (
   IN CONST EFI_SPI_NOR_FLASH_PROTOCOL  *This,
   IN UINT32                            LengthInBytes,
   IN UINT8                             *FlashStatus
   );

 /**
   Write data to the SPI flash.

   This routine must be called at or below TPL_NOTIFY.
   This routine breaks up the write operation as necessary to write the data to
   the SPI part.

   @param[in] This           Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
                             structure.
   @param[in] FlashAddress   Address in the flash to start writing
   @param[in] LengthInBytes  Write length in bytes
   @param[in] Buffer         Address of a buffer containing the data

   @retval EFI_SUCCESS            The data was written successfully.
   @retval EFI_INVALID_PARAMETER  Buffer is NULL, or
                                  FlashAddress >= This->FlashSize, or
                                  LengthInBytes > This->FlashSize - FlashAddress
   @retval EFI_OUT_OF_RESOURCES   Insufficient memory to copy buffer.

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_DATA) (
   IN CONST EFI_SPI_NOR_FLASH_PROTOCOL  *This,
   IN UINT32                            FlashAddress,
   IN UINT32                            LengthInBytes,
   IN UINT8                             *Buffer
   );

 /**
   Efficiently erases one or more 4KiB regions in the SPI flash.

   This routine must be called at or below TPL_NOTIFY.
   This routine uses a combination of 4 KiB and larger blocks to erase the
   specified area.

   @param[in] This          Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
                            structure.
   @param[in] FlashAddress  Address within a 4 KiB block to start erasing
   @param[in] BlockCount    Number of 4 KiB blocks to erase

   @retval EFI_SUCCESS            The erase was completed successfully.
   @retval EFI_INVALID_PARAMETER  FlashAddress >= This->FlashSize, or
                                  BlockCount * 4 KiB
                                    > This->FlashSize - FlashAddress

 **/
 typedef
 EFI_STATUS
 (EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_ERASE) (
   IN CONST EFI_SPI_NOR_FLASH_PROTOCOL  *This,
   IN UINT32                            FlashAddress,
   IN UINT32                            BlockCount
   );

 ///
 /// The EFI_SPI_NOR_FLASH_PROTOCOL exists in the SPI peripheral layer.
 /// This protocol manipulates the SPI NOR flash parts using a common set of
 /// commands. The board layer provides the interconnection and configuration
 /// details for the SPI NOR flash part. The SPI NOR flash driver uses this
 /// configuration data to expose a generic interface which provides the
 /// following APls:
 /// * Read manufacture and device ID
 /// * Read data
 /// * Read data using low frequency
 /// * Read status
 /// * Write data
 /// * Erase 4 KiB blocks
 /// * Erase 32 or 64 KiB blocks
 /// * Write status
 /// The EFI_SPI_NOR_FLASH_PROTOCOL also exposes some APls to set the security
 /// features on the legacy SPI flash controller.
 ///
 struct _EFI_SPI_NOR_FLASH_PROTOCOL {
   ///
   /// Pointer to an EFI_SPI_PERIPHERAL data structure
   ///
   CONST EFI_SPI_PERIPHERAL                *SpiPeripheral;

   ///
   /// Flash size in bytes
   ///
   UINT32                                  FlashSize;

   ///
   /// Manufacture and Device ID
   ///
   UINT8                                   Deviceid[3];

   ///
   /// Erase block size in bytes
   ///
   UINT32                                  EraseBlockBytes;

   ///
   /// Read the 3 byte manufacture and device ID from the SPI flash.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_GET_FLASH_ID GetFlashid;

   ///
   /// Read data from the SPI flash.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA    ReadData;

   ///
   /// Low frequency read data from the SPI flash.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA    LfReadData;

   ///
   /// Read the flash status register.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_READ_STATUS  ReadStatus;

   ///
   /// Write the flash status register.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_STATUS WriteStatus;

   ///
   /// Write data to the SPI flash.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_DATA   WriteData;

   ///
   /// Efficiently erases one or more 4KiB regions in the SPI flash.
   ///
   EFI_SPI_NOR_FLASH_PROTOCOL_ERASE        Erase;
 };

 extern EFI_GUID gEfiSpiNorFlashProtocolGuid;

 #endif // __SPI_NOR_FLASH_PROTOCOL_H__
	/** @file
	This file defines the SPI NOR Flash Protocol.

	Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
	This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD
	License which accompanies this distribution. The full text of the license may
	be found at http://opensource.org/licenses/bsd-license.php

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	@par Revision Reference:
	This Protocol was introduced in UEFI PI Specification 1.6.

	**/

	#ifndef __SPI_NOR_FLASH_PROTOCOL_H__
	#define __SPI_NOR_FLASH_PROTOCOL_H__

	#include <Protocol/SpiConfiguration.h>

	///
	/// Global ID for the SPI NOR Flash Protocol
	///
	#define EFI_SPI_NOR_FLASH_PROTOCOL_GUID \
	{ 0xb57ec3fe, 0xf833, 0x4ba6, \
	{ 0x85, 0x78, 0x2a, 0x7d, 0x6a, 0x87, 0x44, 0x4b }}

	typedef struct _EFI_SPI_NOR_FLASH_PROTOCOL EFI_SPI_NOR_FLASH_PROTOCOL;

	/**
	Read the 3 byte manufacture and device ID from the SPI flash.

	This routine must be called at or below TPL_NOTIFY.
	This routine reads the 3 byte manufacture and device ID from the flash part
	filling the buffer provided.

	@param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data structure.
	@param[out] Buffer Pointer to a 3 byte buffer to receive the manufacture and
	device ID.



	@retval EFI_SUCCESS The manufacture and device ID was read
	successfully.
	@retval EFI_INVALID_PARAMETER Buffer is NULL
	@retval EFI_DEVICE_ERROR Invalid data received from SPI flash part.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_GET_FLASH_ID) (
	IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This,
	OUT UINT8 *Buffer
	);

	/**
	Read data from the SPI flash.

	This routine must be called at or below TPL_NOTIFY.
	This routine reads data from the SPI part in the buffer provided.

	@param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
	structure.
	@param[in] FlashAddress Address in the flash to start reading
	@param[in] LengthInBytes Read length in bytes
	@param[out] Buffer Address of a buffer to receive the data

	@retval EFI_SUCCESS The data was read successfully.
	@retval EFI_INVALID_PARAMETER Buffer is NULL, or
	FlashAddress >= This->FlashSize, or
	LengthInBytes > This->FlashSize - FlashAddress

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA) (
	IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This,
	IN UINT32 FlashAddress,
	IN UINT32 LengthInBytes,
	OUT UINT8 *Buffer
	);

	/**
	Read the flash status register.

	This routine must be called at or below TPL_NOTIFY.
	This routine reads the flash part status register.

	@param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
	structure.
	@param[in] LengthInBytes Number of status bytes to read.
	@param[out] FlashStatus Pointer to a buffer to receive the flash status.

	@retval EFI_SUCCESS The status register was read successfully.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_READ_STATUS) (
	IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This,
	IN UINT32 LengthInBytes,
	OUT UINT8 *FlashStatus
	);

	/**
	Write the flash status register.

	This routine must be called at or below TPL_N OTIFY.
	This routine writes the flash part status register.

	@param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
	structure.
	@param[in] LengthInBytes Number of status bytes to write.
	@param[in] FlashStatus Pointer to a buffer containing the new status.

	@retval EFI_SUCCESS The status write was successful.
	@retval EFI_OUT_OF_RESOURCES Failed to allocate the write buffer.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_STATUS) (
	IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This,
	IN UINT32 LengthInBytes,
	IN UINT8 *FlashStatus
	);

	/**
	Write data to the SPI flash.

	This routine must be called at or below TPL_NOTIFY.
	This routine breaks up the write operation as necessary to write the data to
	the SPI part.

	@param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
	structure.
	@param[in] FlashAddress Address in the flash to start writing
	@param[in] LengthInBytes Write length in bytes
	@param[in] Buffer Address of a buffer containing the data

	@retval EFI_SUCCESS The data was written successfully.
	@retval EFI_INVALID_PARAMETER Buffer is NULL, or
	FlashAddress >= This->FlashSize, or
	LengthInBytes > This->FlashSize - FlashAddress
	@retval EFI_OUT_OF_RESOURCES Insufficient memory to copy buffer.

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_DATA) (
	IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This,
	IN UINT32 FlashAddress,
	IN UINT32 LengthInBytes,
	IN UINT8 *Buffer
	);

	/**
	Efficiently erases one or more 4KiB regions in the SPI flash.

	This routine must be called at or below TPL_NOTIFY.
	This routine uses a combination of 4 KiB and larger blocks to erase the
	specified area.

	@param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data
	structure.
	@param[in] FlashAddress Address within a 4 KiB block to start erasing
	@param[in] BlockCount Number of 4 KiB blocks to erase

	@retval EFI_SUCCESS The erase was completed successfully.
	@retval EFI_INVALID_PARAMETER FlashAddress >= This->FlashSize, or
	BlockCount * 4 KiB
	> This->FlashSize - FlashAddress

	**/
	typedef
	EFI_STATUS
	(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_ERASE) (
	IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This,
	IN UINT32 FlashAddress,
	IN UINT32 BlockCount
	);

	///
	/// The EFI_SPI_NOR_FLASH_PROTOCOL exists in the SPI peripheral layer.
	/// This protocol manipulates the SPI NOR flash parts using a common set of
	/// commands. The board layer provides the interconnection and configuration
	/// details for the SPI NOR flash part. The SPI NOR flash driver uses this
	/// configuration data to expose a generic interface which provides the
	/// following APls:
	/// * Read manufacture and device ID
	/// * Read data
	/// * Read data using low frequency
	/// * Read status
	/// * Write data
	/// * Erase 4 KiB blocks
	/// * Erase 32 or 64 KiB blocks
	/// * Write status
	/// The EFI_SPI_NOR_FLASH_PROTOCOL also exposes some APls to set the security
	/// features on the legacy SPI flash controller.
	///
	struct _EFI_SPI_NOR_FLASH_PROTOCOL {
	///
	/// Pointer to an EFI_SPI_PERIPHERAL data structure
	///
	CONST EFI_SPI_PERIPHERAL *SpiPeripheral;

	///
	/// Flash size in bytes
	///
	UINT32 FlashSize;

	///
	/// Manufacture and Device ID
	///
	UINT8 Deviceid[3];

	///
	/// Erase block size in bytes
	///
	UINT32 EraseBlockBytes;

	///
	/// Read the 3 byte manufacture and device ID from the SPI flash.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_GET_FLASH_ID GetFlashid;

	///
	/// Read data from the SPI flash.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA ReadData;

	///
	/// Low frequency read data from the SPI flash.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA LfReadData;

	///
	/// Read the flash status register.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_READ_STATUS ReadStatus;

	///
	/// Write the flash status register.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_STATUS WriteStatus;

	///
	/// Write data to the SPI flash.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_DATA WriteData;

	///
	/// Efficiently erases one or more 4KiB regions in the SPI flash.
	///
	EFI_SPI_NOR_FLASH_PROTOCOL_ERASE Erase;
	};

	extern EFI_GUID gEfiSpiNorFlashProtocolGuid;

	#endif // __SPI_NOR_FLASH_PROTOCOL_H__