blob: aa94f6ddcdb45aafd50cb77939020f39190a0904 [file] [log] [blame]
/*
* Copyright (C) 2020 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.audio.effect@7.0;
import android.hardware.audio.common@7.0;
import IEffectBufferProviderCallback;
interface IEffect {
/**
* Initialize effect engine--all configurations return to default.
*
* @return retval operation completion status.
*/
@entry
init() generates (Result retval);
/**
* Apply new audio parameters configurations for input and output buffers.
* The provider callbacks may be empty, but in this case the buffer
* must be provided in the EffectConfig structure.
*
* @param config configuration descriptor.
* @param inputBufferProvider optional buffer provider reference.
* @param outputBufferProvider optional buffer provider reference.
* @return retval operation completion status.
*/
setConfig(EffectConfig config,
IEffectBufferProviderCallback inputBufferProvider,
IEffectBufferProviderCallback outputBufferProvider)
generates (Result retval);
/**
* Reset the effect engine. Keep configuration but resets state and buffer
* content.
*
* @return retval operation completion status.
*/
reset() generates (Result retval);
/**
* Enable processing.
*
* @return retval operation completion status.
*/
enable() generates (Result retval);
/**
* Disable processing.
*
* @return retval operation completion status.
*/
disable() generates (Result retval);
/**
* Set the rendering device the audio output path is connected to. The
* effect implementation must set EFFECT_FLAG_DEVICE_IND flag in its
* descriptor to receive this command when the device changes.
*
* Note: this method is only supported for effects inserted into
* the output chain.
*
* @param device output device specification.
* @return retval operation completion status.
*/
setDevice(DeviceAddress device) generates (Result retval);
/**
* Set and get volume. Used by audio framework to delegate volume control to
* effect engine. The effect implementation must set EFFECT_FLAG_VOLUME_CTRL
* flag in its descriptor to receive this command. The effect engine must
* return the volume that should be applied before the effect is
* processed. The overall volume (the volume actually applied by the effect
* engine multiplied by the returned value) should match the value indicated
* in the command.
*
* @param volumes vector containing volume for each channel defined in
* EffectConfig for output buffer expressed in 8.24 fixed
* point format.
* @return result updated volume values.
* @return retval operation completion status.
*/
setAndGetVolume(vec<uint32_t> volumes)
generates (Result retval, vec<uint32_t> result);
/**
* Notify the effect of the volume change. The effect implementation must
* set EFFECT_FLAG_VOLUME_IND flag in its descriptor to receive this
* command.
*
* @param volumes vector containing volume for each channel defined in
* EffectConfig for output buffer expressed in 8.24 fixed
* point format.
* @return retval operation completion status.
*/
volumeChangeNotification(vec<uint32_t> volumes)
generates (Result retval);
/**
* Set the audio mode. The effect implementation must set
* EFFECT_FLAG_AUDIO_MODE_IND flag in its descriptor to receive this command
* when the audio mode changes.
*
* @param mode desired audio mode.
* @return retval operation completion status.
*/
setAudioMode(AudioMode mode) generates (Result retval);
/**
* Apply new audio parameters configurations for input and output buffers of
* reverse stream. An example of reverse stream is the echo reference
* supplied to an Acoustic Echo Canceler.
*
* @param config configuration descriptor.
* @param inputBufferProvider optional buffer provider reference.
* @param outputBufferProvider optional buffer provider reference.
* @return retval operation completion status.
*/
setConfigReverse(EffectConfig config,
IEffectBufferProviderCallback inputBufferProvider,
IEffectBufferProviderCallback outputBufferProvider)
generates (Result retval);
/**
* Set the capture device the audio input path is connected to. The effect
* implementation must set EFFECT_FLAG_DEVICE_IND flag in its descriptor to
* receive this command when the device changes.
*
* Note: this method is only supported for effects inserted into
* the input chain.
*
* @param device input device specification.
* @return retval operation completion status.
*/
setInputDevice(DeviceAddress device) generates (Result retval);
/**
* Read audio parameters configurations for input and output buffers.
*
* @return retval operation completion status.
* @return config configuration descriptor.
*/
getConfig() generates (Result retval, EffectConfig config);
/**
* Read audio parameters configurations for input and output buffers of
* reverse stream.
*
* @return retval operation completion status.
* @return config configuration descriptor.
*/
getConfigReverse() generates (Result retval, EffectConfig config);
/**
* Queries for supported combinations of main and auxiliary channels
* (e.g. for a multi-microphone noise suppressor).
*
* @param maxConfigs maximum number of the combinations to return.
* @return retval absence of the feature support is indicated using
* NOT_SUPPORTED code. RESULT_TOO_BIG is returned if
* the number of supported combinations exceeds 'maxConfigs'.
* @return result list of configuration descriptors.
*/
getSupportedAuxChannelsConfigs(uint32_t maxConfigs)
generates (Result retval, vec<EffectAuxChannelsConfig> result);
/**
* Retrieves the current configuration of main and auxiliary channels.
*
* @return retval absence of the feature support is indicated using
* NOT_SUPPORTED code.
* @return result configuration descriptor.
*/
getAuxChannelsConfig()
generates (Result retval, EffectAuxChannelsConfig result);
/**
* Sets the current configuration of main and auxiliary channels.
*
* @return retval operation completion status; absence of the feature
* support is indicated using NOT_SUPPORTED code.
*/
setAuxChannelsConfig(EffectAuxChannelsConfig config)
generates (Result retval);
/**
* Set the audio source the capture path is configured for (Camcorder, voice
* recognition...).
*
* Note: this method is only supported for effects inserted into
* the input chain.
*
* @param source source descriptor.
* @return retval operation completion status.
*/
setAudioSource(AudioSource source) generates (Result retval);
/**
* This command indicates if the playback thread the effect is attached to
* is offloaded or not, and updates the I/O handle of the playback thread
* the effect is attached to.
*
* @param param effect offload descriptor.
* @return retval operation completion status.
*/
offload(EffectOffloadParameter param) generates (Result retval);
/**
* Returns the effect descriptor.
*
* @return retval operation completion status.
* @return descriptor effect descriptor.
*/
getDescriptor() generates (Result retval, EffectDescriptor descriptor);
/**
* Set up required transports for passing audio buffers to the effect.
*
* The transport consists of shared memory and a message queue for reporting
* effect processing operation status. The shared memory is set up
* separately using 'setProcessBuffers' method.
*
* Processing is requested by setting 'REQUEST_PROCESS' or
* 'REQUEST_PROCESS_REVERSE' EventFlags associated with the status message
* queue. The result of processing may be one of the following:
* OK if there were no errors during processing;
* INVALID_ARGUMENTS if audio buffers are invalid;
* INVALID_STATE if the engine has finished the disable phase;
* NOT_INITIALIZED if the audio buffers were not set;
* NOT_SUPPORTED if the requested processing type is not supported by
* the effect.
*
* @return retval OK if both message queues were created successfully.
* INVALID_STATE if the method was already called.
* INVALID_ARGUMENTS if there was a problem setting up
* the queue.
* @return statusMQ a message queue used for passing status from the effect.
*/
prepareForProcessing() generates (Result retval, fmq_sync<Result> statusMQ);
/**
* Set up input and output buffers for processing audio data. The effect
* may modify both the input and the output buffer during the operation.
* Buffers may be set multiple times during effect lifetime.
*
* The input and the output buffer may be reused between different effects,
* and the input buffer may be used as an output buffer. Buffers are
* distinguished using 'AudioBuffer.id' field.
*
* @param inBuffer input audio buffer.
* @param outBuffer output audio buffer.
* @return retval OK if both buffers were mapped successfully.
* INVALID_ARGUMENTS if there was a problem with mapping
* any of the buffers.
*/
setProcessBuffers(AudioBuffer inBuffer, AudioBuffer outBuffer)
generates (Result retval);
/**
* Execute a vendor specific command on the effect. The command code
* and data, as well as result data are not interpreted by Android
* Framework and are passed as-is between the application and the effect.
*
* The effect must use standard POSIX.1-2001 error codes for the operation
* completion status.
*
* Use this method only if the effect is provided by a third party, and
* there is no interface defined for it. This method only works for effects
* implemented in software.
*
* @param commandId the ID of the command.
* @param data command data.
* @param resultMaxSize maximum size in bytes of the result; can be 0.
* @return status command completion status.
* @return result result data.
*/
command(uint32_t commandId, vec<uint8_t> data, uint32_t resultMaxSize)
generates (int32_t status, vec<uint8_t> result);
/**
* Set a vendor-specific parameter and apply it immediately. The parameter
* code and data are not interpreted by Android Framework and are passed
* as-is between the application and the effect.
*
* The effect must use INVALID_ARGUMENTS return code if the parameter ID is
* unknown or if provided parameter data is invalid. If the effect does not
* support setting vendor-specific parameters, it must return NOT_SUPPORTED.
*
* Use this method only if the effect is provided by a third party, and
* there is no interface defined for it. This method only works for effects
* implemented in software.
*
* @param parameter identifying data of the parameter.
* @param value the value of the parameter.
* @return retval operation completion status.
*/
setParameter(vec<uint8_t> parameter, vec<uint8_t> value)
generates (Result retval);
/**
* Get a vendor-specific parameter value. The parameter code and returned
* data are not interpreted by Android Framework and are passed as-is
* between the application and the effect.
*
* The effect must use INVALID_ARGUMENTS return code if the parameter ID is
* unknown. If the effect does not support setting vendor-specific
* parameters, it must return NOT_SUPPORTED.
*
* Use this method only if the effect is provided by a third party, and
* there is no interface defined for it. This method only works for effects
* implemented in software.
*
* @param parameter identifying data of the parameter.
* @param valueMaxSize maximum size in bytes of the value.
* @return retval operation completion status.
* @return result the value of the parameter.
*/
getParameter(vec<uint8_t> parameter, uint32_t valueMaxSize)
generates (Result retval, vec<uint8_t> value);
/**
* Get supported configs for a vendor-specific feature. The configs returned
* are not interpreted by Android Framework and are passed as-is between the
* application and the effect.
*
* The effect must use INVALID_ARGUMENTS return code if the feature ID is
* unknown. If the effect does not support getting vendor-specific feature
* configs, it must return NOT_SUPPORTED. If the feature is supported but
* the total number of supported configurations exceeds the maximum number
* indicated by the caller, the method must return RESULT_TOO_BIG.
*
* Use this method only if the effect is provided by a third party, and
* there is no interface defined for it. This method only works for effects
* implemented in software.
*
* @param featureId feature identifier.
* @param maxConfigs maximum number of configs to return.
* @param configSize size of each config in bytes.
* @return retval operation completion status.
* @return configsCount number of configs returned.
* @return configsData data for all the configs returned.
*/
getSupportedConfigsForFeature(
uint32_t featureId,
uint32_t maxConfigs,
uint32_t configSize) generates (
Result retval,
uint32_t configsCount,
vec<uint8_t> configsData);
/**
* Get the current config for a vendor-specific feature. The config returned
* is not interpreted by Android Framework and is passed as-is between the
* application and the effect.
*
* The effect must use INVALID_ARGUMENTS return code if the feature ID is
* unknown. If the effect does not support getting vendor-specific
* feature configs, it must return NOT_SUPPORTED.
*
* Use this method only if the effect is provided by a third party, and
* there is no interface defined for it. This method only works for effects
* implemented in software.
*
* @param featureId feature identifier.
* @param configSize size of the config in bytes.
* @return retval operation completion status.
* @return configData config data.
*/
getCurrentConfigForFeature(uint32_t featureId, uint32_t configSize)
generates (Result retval, vec<uint8_t> configData);
/**
* Set the current config for a vendor-specific feature. The config data
* is not interpreted by Android Framework and is passed as-is between the
* application and the effect.
*
* The effect must use INVALID_ARGUMENTS return code if the feature ID is
* unknown. If the effect does not support getting vendor-specific
* feature configs, it must return NOT_SUPPORTED.
*
* Use this method only if the effect is provided by a third party, and
* there is no interface defined for it. This method only works for effects
* implemented in software.
*
* @param featureId feature identifier.
* @param configData config data.
* @return retval operation completion status.
*/
setCurrentConfigForFeature(uint32_t featureId, vec<uint8_t> configData)
generates (Result retval);
/**
* Called by the framework to deinitialize the effect and free up
* all currently allocated resources. It is recommended to close
* the effect on the client side as soon as it is becomes unused.
*
* The client must ensure that this function is not called while
* audio data is being transferred through the effect's message queues.
*
* @return retval OK in case the success.
* INVALID_STATE if the effect was already closed.
*/
close() generates (Result retval);
};