sdk/fidl/fuchsia.hardware.bluetooth/hci.fidl

// Copyright 2019 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
library fuchsia.hardware.bluetooth;

using zx;

type ScoCodingFormat = flexible enum : uint8 {
    CVSD = 1;
    MSBC = 2;
};

type ScoEncoding = flexible enum : uint8 {
    BITS_8 = 1;
    BITS_16 = 2;
};

type ScoSampleRate = flexible enum : uint8 {
    KHZ_8 = 1;
    KHZ_16 = 2;
};

const EVENT_MAX uint64 = 257;
const COMMAND_MAX uint64 = 258;
const ACL_PACKET_MAX uint64 = 65539;
const ISO_PACKET_MAX uint64 = 16387;
const SCO_PACKET_MAX uint64 = 258;

/// Packet received by the host from the controller.
type ReceivedPacket = flexible union {
    1: event vector<byte>:EVENT_MAX;
    2: acl vector<byte>:ACL_PACKET_MAX;
    3: iso vector<byte>:ISO_PACKET_MAX;
};

/// Packet sent by the host to the controller.
type SentPacket = flexible union {
    1: command vector<byte>:COMMAND_MAX;
    2: acl vector<byte>:ACL_PACKET_MAX;
    3: iso vector<byte>:ISO_PACKET_MAX;
};

type ScoPacket = struct {
    packet vector<byte>:SCO_PACKET_MAX;
};

open protocol ScoConnection {
    /// More than one Send can be pending simultaneously.
    /// Prefer to limit the number of pending calls to avoid overflow.
    /// A maximum of 10 pending calls is suggested.
    flexible Send(ScoPacket) -> ();

    /// More than one packet event can be sent before acknowledged. Each packet must be
    /// acknowledged with `AckReceive`. Servers should limit the number of pending acknowledgements
    /// to avoid channel overflow. A maximum of 10 unacked packets is recommended.
    flexible -> OnReceive(ScoPacket);
    flexible AckReceive();

    /// The server will close the protocol when `Stop` is received. This is useful for
    /// synchronization (e.g. before configuring another `ScoConnection`).
    flexible Stop();
};

open protocol Snoop {
    /// A packet has been transmitted/received. Some number of packets can be observed before the
    /// client stalls. The client is allowed to drop packets if the server takes too long to
    /// acknowledge packets.
    flexible ObservePacket(table {
        /// Monotonically increasing packet count. Used for flow control in conjunction with
        /// `OnAcknowledgePackets`.
        1: sequence uint64;
        /// Either `sent` or `received` will be set, but not both.
        2: sent SentPacket;
        3: received ReceivedPacket;
    });

    /// Acknowledge packets have been received up to `sequence`.
    flexible -> OnAcknowledgePackets(struct {
        sequence uint64;
    });

    /// Sent by the client after `OnAcknowledgePackets` is received if packets were dropped since
    /// the last `ObservePacket`.
    flexible OnDroppedPackets(table {
        1: sent uint32;
        2: received uint32;
    });
};

open protocol HciTransport {
    /// More than one Send can be pending simultaneously.
    /// Prefer to limit the number of pending calls to avoid overflow.
    /// A maximum of 10 pending calls is suggested.
    /// If an event or SCO packet is received by the server, the server should close the protocol.
    flexible Send(SentPacket) -> ();

    /// More than one packet event can be sent before acknowledged. Each packet must be
    /// acknowledged with `AckReceive`. Servers should limit the number of pending acknowledgements
    /// to avoid channel overflow. A maximum of 10 unacked packets is recommended. If a command or
    /// SCO packet is received by the client, the client should close the protocol.
    flexible -> OnReceive(ReceivedPacket);
    flexible AckReceive();

    /// Establish a SCO connection. Only 1 SCO connection can be configured at a time.
    flexible ConfigureSco(resource table {
        /// Required.
        1: coding_format ScoCodingFormat;
        /// Required.
        2: encoding ScoEncoding;
        /// Required.
        3: sample_rate ScoSampleRate;
        /// Required.
        4: connection server_end:ScoConnection;
    });

    /// Set a `Snoop` client that will be notified of all sent and received packets.
    flexible SetSnoop(resource struct {
        snoop client_end:Snoop;
    });
};

open protocol Hci {
    /// Open the two-way HCI command channel for sending HCI commands and
    /// receiving event packets.  Returns ZX_ERR_ALREADY_BOUND if the channel
    /// is already open.
    flexible OpenCommandChannel(resource struct {
        channel zx.Handle:CHANNEL;
    }) -> () error zx.Status;

    /// Open the two-way HCI ACL data channel.
    /// Returns ZX_ERR_ALREADY_BOUND if the channel is already open.
    flexible OpenAclDataChannel(resource struct {
        channel zx.Handle:CHANNEL;
    }) -> () error zx.Status;

    // TODO(b/315877895): Define a new protocol to hold SCO API calls.
    /// Opens a SCO channel on the provided handle. The zircon channel is
    /// closed in the event of an error opening the hci channel or if the hci
    /// channel is already associated with a handle to another zircon channel.
    /// Returns ZX_ERR_NOT_SUPPORTED if SCO is not supported by the current vendor or transport
    /// driver.
    /// Returns ZX_ERR_ALREADY_BOUND if the channel is already open.
    flexible OpenScoDataChannel(resource struct {
        channel zx.Handle:CHANNEL;
    }) -> () error zx.Status;

    /// Configure the HCI for a SCO connection with the indicated parameters.
    /// This must be called before sending/receiving data on the SCO channel.
    /// Returns ZX_ERR_NOT_SUPPORTED if SCO is not supported by the current vendor or transport
    /// driver.
    flexible ConfigureSco(struct {
        coding_format ScoCodingFormat;
        encoding ScoEncoding;
        sample_rate ScoSampleRate;
    }) -> () error zx.Status;

    /// Releases resources held by an active SCO connection. Must be called
    /// when a SCO connection is closed.
    /// Returns ZX_ERR_NOT_SUPPORTED if SCO is not supported by the current vendor or transport
    /// driver.
    flexible ResetSco() -> () error zx.Status;

    /// Opens a channel on the provided handle for sending and receiving isochronous data packets.
    /// The zircon channel is closed in the event of an error opening the hci channel or if the hci
    /// channel is already associated with a handle to another zircon channel.
    /// Returns ZX_ERR_NOT_SUPPORTED if ISO is not supported by the current vendor or transport
    /// driver.
    /// Returns ZX_ERR_ALREADY_BOUND if the channel is already open.
    flexible OpenIsoDataChannel(resource struct {
        channel zx.Handle:CHANNEL;
    }) -> () error zx.Status;

    /// Open an output-only channel for monitoring HCI traffic.
    /// The format of each message is: [1-octet flags] [n-octet payload]
    /// The flags octet is a bitfield with the following values defined:
    ///  - 0x00: The payload represents a command packet sent from the host to the
    ///          controller.
    ///  - 0x01: The payload represents an event packet sent by the controller.
    /// Returns ZX_ERR_ALREADY_BOUND if the channel is already open.
    flexible OpenSnoopChannel(resource struct {
        channel zx.Handle:CHANNEL;
    }) -> () error zx.Status;
};

/// Wrap the protocol in a service that will be exposed to the child driver.
service HciService {
    hci client_end:Hci;
};