sdk/banjo/fuchsia.hardware.usb.hubdescriptor/hub-descriptor.fidl

// Copyright 2021 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
library fuchsia.hardware.usb.hubdescriptor;

// Hub request types.
const USB_RECIP_HUB uint32 = 0b0000000000100000; // USB_TYPE_CLASS | USB_RECIP_DEVICE
const USB_RECIP_PORT uint32 = 0b0000000000100011; // USB_TYPE_CLASS | USB_RECIP_OTHER

// Hub requests.
const USB_HUB_SET_DEPTH uint32 = 12;

// Hub descriptor types.
const USB_HUB_DESC_TYPE uint32 = 0x29;
const USB_HUB_DESC_TYPE_SS uint32 = 0x2A; // for superspeed hubs

// Hub Class Feature Selectors (USB 2.0 spec Table 11.17)
const USB_FEATURE_C_HUB_LOCAL_POWER uint32 = 0;
const USB_FEATURE_C_HUB_OVER_CURRENT uint32 = 1;
const USB_FEATURE_PORT_CONNECTION uint32 = 0;
const USB_FEATURE_PORT_ENABLE uint32 = 1;
const USB_FEATURE_PORT_SUSPEND uint32 = 2;
const USB_FEATURE_PORT_OVER_CURRENT uint32 = 3;
const USB_FEATURE_PORT_RESET uint32 = 4;
const USB_FEATURE_PORT_LINK_STATE uint32 = 5;
const USB_FEATURE_PORT_POWER uint32 = 8;
const USB_FEATURE_PORT_LOW_SPEED uint32 = 9;
const USB_FEATURE_C_PORT_CONNECTION uint32 = 16;
const USB_FEATURE_C_PORT_ENABLE uint32 = 17;
const USB_FEATURE_C_PORT_SUSPEND uint32 = 18;
const USB_FEATURE_C_PORT_OVER_CURRENT uint32 = 19;
const USB_FEATURE_C_PORT_RESET uint32 = 20;
const USB_FEATURE_PORT_TEST uint32 = 21;
const USB_FEATURE_PORT_INDICATOR uint32 = 22;
const USB_FEATURE_PORT_U1_TIMEOUT uint32 = 23;
const USB_FEATURE_PORT_U2_TIMEOUT uint32 = 24;
const USB_FEATURE_C_PORT_LINK_STATE uint32 = 25;
const USB_FEATURE_C_PORT_CONFIG_ERROR uint32 = 26;
const USB_FEATURE_PORT_REMOTE_WAKE_MASK uint32 = 27;
const USB_FEATURE_BH_PORT_RESET uint32 = 28;
const USB_FEATURE_C_BH_PORT_RESET uint32 = 29;
const USB_FEATURE_FORCE_LINKPM_ACCEPT uint32 = 30;

@packed
@preserve_c_names
type Usb2Payload = struct {
    device_removable array<uint8, 4>;
    port_pwr_ctrl_mask array<uint8, 4>;
};

@packed
@preserve_c_names
type Usb3Payload = struct {
    b_hub_hdr_dec_lat uint8;
    w_hub_delay uint16;
    device_removable uint16;
};

@packed
type UsbHubDescriptorPayload = strict union {
    1: hs Usb2Payload;
    2: ss Usb3Payload;
};

@packed
@preserve_c_names
type UsbHubDescriptor = struct {
    b_desc_length uint8;
    b_descriptor_type uint8;
    b_nbr_ports uint8;
    w_hub_characteristics uint16;
    b_power_on2_pwr_good uint8;
    b_hub_contr_current uint8;
    payload UsbHubDescriptorPayload;
};

@packed
@preserve_c_names
type UsbPortStatus = struct {
    w_port_status uint16;
    w_port_change uint16;
};

// Port Status bits.
const USB_PORT_CONNECTION uint32 = 0b0000000000000001; // 1 << 0
const USB_PORT_ENABLE uint32 = 0b0000000000000010; // 1 << 1
const USB_PORT_SUSPEND uint32 = 0b0000000000000100; // 1 << 2  // USB 2.0 only
const USB_PORT_OVER_CURRENT uint32 = 0b0000000000001000; // 1 << 3
const USB_PORT_RESET uint32 = 0b0000000000010000; // 1 << 4
const USB_PORT_POWER uint32 = 0b0000000100000000; // 1 << 8  // USB 2.0 only
const USB_PORT_LOW_SPEED uint32 = 0b0000001000000000; // 1 << 9  // USB 2.0 only
const USB_PORT_HIGH_SPEED uint32 = 0b0000010000000000; // 1 << 10 // USB 2.0 only
const USB_PORT_TEST_MODE uint32 = 0b0000100000000000; // 1 << 11 // USB 2.0 only
const USB_PORT_INDICATOR_CONTROL uint32 = 0b0001000000000000; // 1 << 12 // USB 2.0 only

// Port Status Changed bits.
const USB_C_PORT_CONNECTION uint32 = 0b0000000000000001; // 1 << 0
const USB_C_PORT_ENABLE uint32 = 0b0000000000000010; // 1 << 1  // USB 2.0 only
const USB_C_PORT_SUSPEND uint32 = 0b0000000000000100; // 1 << 2  // USB 2.0 only
const USB_C_PORT_OVER_CURRENT uint32 = 0b0000000000001000; // 1 << 3
const USB_C_PORT_RESET uint32 = 0b0000000000010000; // 1 << 4
const USB_C_BH_PORT_RESET uint32 = 0b0000000000100000; // 1 << 5  // USB 3.0 only
const USB_C_PORT_LINK_STATE uint32 = 0b0000000001000000; // 1 << 6  // USB 3.0 only
const USB_C_PORT_CONFIG_ERROR uint32 = 0b0000000010000000; // 1 << 7  // USB 3.0 only
const USB_C_PORT_POWER uint32 = 0b0000000100000000; // 1 << 8  // USB 2.0 only
const USB_C_PORT_LOW_SPEED uint32 = 0b0000001000000000; // 1 << 9  // USB 2.0 only
const USB_C_PORT_HIGH_SPEED uint32 = 0b0000010000000000; // 1 << 10 // USB 2.0 only
const USB_C_PORT_TEST_MODE uint32 = 0b0000100000000000; // 1 << 11 // USB 2.0 only
const USB_C_PORT_INDICATOR_CONTROL uint32 = 0b0001000000000000; // 1 << 12 // USB 2.0 only