| // Copyright 2018 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include <ddk/binding.h> |
| #include <ddk/debug.h> |
| #include <ddk/metadata.h> |
| #include <ddk/platform-defs.h> |
| #include <fbl/algorithm.h> |
| #include <hw/reg.h> |
| #include <soc/aml-a113/a113-hw.h> |
| #include <soc/aml-common/aml-sd-emmc.h> |
| #include <soc/aml-s912/s912-gpio.h> |
| #include <soc/aml-s912/s912-hw.h> |
| #include <wifi/wifi-config.h> |
| |
| #include "vim.h" |
| #include "vim-gpios.h" |
| |
| namespace vim { |
| |
| static const pbus_mmio_t aml_sd_emmc_mmios[] = { |
| { |
| .base = 0xD0070000, |
| .length = 0x2000, |
| }}; |
| |
| static const pbus_irq_t aml_sd_emmc_irqs[] = { |
| { |
| .irq = 248, |
| //c++ initialization error |
| .mode = 0, |
| //c++ initialization error |
| }, |
| }; |
| |
| static const pbus_bti_t aml_sd_emmc_btis[] = { |
| { |
| .iommu_index = 0, |
| .bti_id = BTI_SDIO, |
| }, |
| }; |
| |
| static const pbus_gpio_t aml_sd_emmc_gpios[] = { |
| { |
| .gpio = S912_GPIOX(6), |
| }, |
| }; |
| |
| static aml_sd_emmc_config_t config = { |
| .supports_dma = true, |
| .min_freq = 400000, |
| .max_freq = 100000000, |
| }; |
| |
| static const wifi_config_t wifi_config = { |
| .oob_irq_mode = ZX_INTERRUPT_MODE_LEVEL_HIGH, |
| }; |
| |
| |
| static const pbus_metadata_t aml_sd_emmc_metadata[] = { |
| { |
| .type = DEVICE_METADATA_EMMC_CONFIG, |
| .data_buffer = &config, |
| .data_size = sizeof(config), |
| }, |
| { |
| .type = DEVICE_METADATA_WIFI_CONFIG, |
| .data_buffer = &wifi_config, |
| .data_size = sizeof(wifi_config), |
| }, |
| }; |
| |
| static const pbus_dev_t aml_sd_emmc_dev = []() { |
| pbus_dev_t dev; |
| |
| dev.name = "aml-sdio"; |
| dev.vid = PDEV_VID_AMLOGIC; |
| dev.pid = PDEV_PID_GENERIC; |
| dev.did = PDEV_DID_AMLOGIC_SD_EMMC_A; |
| dev.mmio_list = aml_sd_emmc_mmios; |
| dev.mmio_count = countof(aml_sd_emmc_mmios); |
| dev.irq_list = aml_sd_emmc_irqs; |
| dev.irq_count = countof(aml_sd_emmc_irqs); |
| dev.gpio_list = aml_sd_emmc_gpios; |
| dev.gpio_count = countof(aml_sd_emmc_gpios); |
| dev.bti_list = aml_sd_emmc_btis; |
| dev.bti_count = countof(aml_sd_emmc_btis); |
| dev.metadata_list = aml_sd_emmc_metadata; |
| dev.metadata_count = countof(aml_sd_emmc_metadata); |
| return dev; |
| }(); |
| |
| // Composite binding rules for wifi driver. |
| static const zx_bind_inst_t root_match[] = { |
| BI_MATCH(), |
| }; |
| static const zx_bind_inst_t sdio_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_SDIO), |
| BI_ABORT_IF(NE, BIND_SDIO_VID, 0x02d0), |
| // The specific function number doesn't matter as long as we bind to one and only one of the |
| // created SDIO devices. The numbers start at 1, so just bind to the first device. |
| BI_ABORT_IF(NE, BIND_SDIO_FUNCTION, 1), |
| BI_MATCH_IF(EQ, BIND_SDIO_PID, 0x4345), |
| BI_MATCH_IF(EQ, BIND_SDIO_PID, 0x4359), |
| BI_MATCH_IF(EQ, BIND_SDIO_PID, 0x4356), // Used in VIM2 Basic |
| }; |
| static const zx_bind_inst_t oob_gpio_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_GPIO), |
| BI_MATCH_IF(EQ, BIND_GPIO_PIN, S912_WIFI_SDIO_WAKE_HOST), |
| }; |
| static const zx_bind_inst_t debug_gpio_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_GPIO), |
| BI_MATCH_IF(EQ, BIND_GPIO_PIN, GPIO_WIFI_DEBUG), |
| }; |
| static const device_component_part_t sdio_component[] = { |
| { fbl::count_of(root_match), root_match }, |
| { fbl::count_of(sdio_match), sdio_match }, |
| }; |
| static const device_component_part_t oob_gpio_component[] = { |
| { fbl::count_of(root_match), root_match }, |
| { fbl::count_of(oob_gpio_match), oob_gpio_match }, |
| }; |
| static const device_component_part_t debug_gpio_component[] = { |
| { fbl::count_of(root_match), root_match }, |
| { fbl::count_of(debug_gpio_match), debug_gpio_match }, |
| }; |
| static const device_component_t wifi_composite[] = { |
| { fbl::count_of(sdio_component), sdio_component }, |
| { fbl::count_of(oob_gpio_component), oob_gpio_component }, |
| { fbl::count_of(debug_gpio_component), debug_gpio_component }, |
| }; |
| |
| zx_status_t Vim::SdioInit() { |
| zx_status_t status; |
| |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_D0, S912_WIFI_SDIO_D0_FN); |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_D1, S912_WIFI_SDIO_D1_FN); |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_D2, S912_WIFI_SDIO_D2_FN); |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_D3, S912_WIFI_SDIO_D3_FN); |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_CLK, S912_WIFI_SDIO_CLK_FN); |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_CMD, S912_WIFI_SDIO_CMD_FN); |
| gpio_impl_.SetAltFunction(S912_WIFI_SDIO_WAKE_HOST, S912_WIFI_SDIO_WAKE_HOST_FN); |
| |
| if ((status = pbus_.DeviceAdd(&aml_sd_emmc_dev)) != ZX_OK) { |
| zxlogf(ERROR, "SdioInit could not add aml_sd_emmc_dev: %d\n", status); |
| return status; |
| } |
| |
| // Add a composite device for wifi driver. |
| constexpr zx_device_prop_t props[] = { |
| { BIND_PLATFORM_DEV_VID, 0, PDEV_VID_BROADCOM }, |
| { BIND_PLATFORM_DEV_PID, 0, PDEV_PID_BCM4356 }, |
| { BIND_PLATFORM_DEV_DID, 0, PDEV_DID_BCM_WIFI }, |
| }; |
| |
| status = DdkAddComposite("wifi", props, fbl::count_of(props), wifi_composite, |
| fbl::count_of(wifi_composite), 0); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s: device_add_composite failed: %d\n", __func__, status); |
| return status; |
| } |
| |
| return ZX_OK; |
| } |
| } //namespace vim |