| // Copyright 2018 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include <ddk/binding.h> |
| #include <ddk/debug.h> |
| #include <ddk/device.h> |
| #include <ddk/platform-defs.h> |
| #include <ddk/metadata.h> |
| #include <ddk/metadata/display.h> |
| #include <soc/aml-t931/t931-gpio.h> |
| #include "sherlock.h" |
| #include "sherlock-gpios.h" |
| |
| namespace sherlock { |
| |
| namespace { |
| constexpr pbus_mmio_t display_mmios[] = { |
| { |
| // VBUS/VPU |
| .base = T931_VPU_BASE, |
| .length = T931_VPU_LENGTH, |
| }, |
| { |
| // DSI Host Controller |
| .base = T931_TOP_MIPI_DSI_BASE, |
| .length = T931_TOP_MIPI_DSI_LENGTH, |
| }, |
| { |
| // DSI PHY |
| .base = T931_DSI_PHY_BASE, |
| .length = T931_DSI_PHY_LENGTH, |
| }, |
| { |
| // HHI |
| .base = T931_HIU_BASE, |
| .length = T931_HIU_LENGTH, |
| }, |
| { |
| // AOBUS |
| .base = T931_AOBUS_BASE, |
| .length = T931_AOBUS_LENGTH, |
| }, |
| { |
| // CBUS |
| .base = T931_CBUS_BASE, |
| .length = T931_CBUS_LENGTH, |
| }, |
| }; |
| |
| static const pbus_irq_t display_irqs[] = { |
| { |
| .irq = T931_VIU1_VSYNC_IRQ, |
| .mode = ZX_INTERRUPT_MODE_EDGE_HIGH, |
| }, |
| { |
| .irq = T931_RDMA_DONE, |
| .mode = ZX_INTERRUPT_MODE_EDGE_HIGH, |
| }, |
| }; |
| |
| constexpr display_driver_t display_driver_info[] = { |
| { |
| .vid = PDEV_VID_AMLOGIC, |
| .pid = PDEV_PID_AMLOGIC_S905D2, |
| .did = PDEV_DID_AMLOGIC_DISPLAY, |
| }, |
| }; |
| |
| constexpr pbus_metadata_t display_metadata[] = { |
| { |
| .type = DEVICE_METADATA_DISPLAY_DEVICE, |
| .data_buffer = &display_driver_info, |
| .data_size = sizeof(display_driver_t), |
| }, |
| }; |
| |
| static const pbus_bti_t display_btis[] = { |
| { |
| .iommu_index = 0, |
| .bti_id = BTI_DISPLAY, |
| }, |
| }; |
| |
| constexpr pbus_mmio_t dsi_mmios[] = { |
| { |
| // DSI Host Controller |
| .base = T931_MIPI_DSI_BASE, |
| .length = T931_MIPI_DSI_LENGTH, |
| }, |
| }; |
| |
| static pbus_dev_t display_dev = []() { |
| pbus_dev_t dev; |
| dev.name = "display"; |
| dev.vid = PDEV_VID_AMLOGIC; |
| dev.pid = PDEV_PID_AMLOGIC_S905D2; |
| dev.did = PDEV_DID_AMLOGIC_DISPLAY; |
| dev.mmio_list = display_mmios; |
| dev.mmio_count = countof(display_mmios); |
| dev.irq_list = display_irqs; |
| dev.irq_count = countof(display_irqs); |
| dev.bti_list = display_btis; |
| dev.bti_count = countof(display_btis); |
| return dev; |
| }(); |
| |
| static pbus_dev_t dsi_dev = []() { |
| pbus_dev_t dev; |
| dev.name = "dw-dsi"; |
| dev.vid = PDEV_VID_GENERIC; |
| dev.pid = PDEV_PID_GENERIC; |
| dev.did = PDEV_DID_DW_DSI; |
| dev.metadata_list = display_metadata; |
| dev.metadata_count = countof(display_metadata); |
| dev.mmio_list = dsi_mmios; |
| dev.mmio_count =countof(dsi_mmios); |
| return dev; |
| }(); |
| |
| // Composite binding rules for display driver. |
| static const zx_bind_inst_t root_match[] = { |
| BI_MATCH(), |
| }; |
| static const zx_bind_inst_t dsi_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_DSI_IMPL), |
| BI_ABORT_IF(NE, BIND_PLATFORM_DEV_VID, PDEV_VID_AMLOGIC), |
| BI_MATCH_IF(EQ, BIND_PLATFORM_DEV_PID, PDEV_PID_AMLOGIC_S905D2), |
| BI_MATCH_IF(EQ, BIND_PLATFORM_DEV_DID, PDEV_DID_AMLOGIC_DISPLAY), |
| }; |
| static const zx_bind_inst_t panel_gpio_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_GPIO), |
| BI_MATCH_IF(EQ, BIND_GPIO_PIN, GPIO_PANEL_DETECT), |
| }; |
| static const zx_bind_inst_t lcd_gpio_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_GPIO), |
| BI_MATCH_IF(EQ, BIND_GPIO_PIN, GPIO_LCD_RESET), |
| }; |
| static const zx_bind_inst_t sysmem_match[] = { |
| BI_MATCH_IF(EQ, BIND_PROTOCOL, ZX_PROTOCOL_SYSMEM), |
| }; |
| static const zx_bind_inst_t canvas_match[] = { |
| BI_MATCH_IF(EQ, BIND_PROTOCOL, ZX_PROTOCOL_AMLOGIC_CANVAS), |
| }; |
| static const device_component_part_t dsi_component[] = { |
| { countof(root_match), root_match }, |
| { countof(dsi_match), dsi_match }, |
| }; |
| static const device_component_part_t panel_gpio_component[] = { |
| { countof(root_match), root_match }, |
| { countof(panel_gpio_match), panel_gpio_match }, |
| }; |
| static const device_component_part_t lcd_gpio_component[] = { |
| { countof(root_match), root_match }, |
| { countof(lcd_gpio_match), lcd_gpio_match }, |
| }; |
| static const device_component_part_t sysmem_component[] = { |
| { countof(root_match), root_match }, |
| { countof(sysmem_match), sysmem_match }, |
| }; |
| static const device_component_part_t canvas_component[] = { |
| { countof(root_match), root_match }, |
| { countof(canvas_match), canvas_match }, |
| }; |
| static const device_component_t components[] = { |
| { countof(dsi_component), dsi_component }, |
| { countof(panel_gpio_component), panel_gpio_component }, |
| { countof(lcd_gpio_component), lcd_gpio_component }, |
| { countof(sysmem_component), sysmem_component }, |
| { countof(canvas_component), canvas_component }, |
| }; |
| |
| } // namespace |
| |
| zx_status_t Sherlock::DisplayInit() { |
| |
| auto status = pbus_.DeviceAdd(&dsi_dev); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s: DeviceAdd failed %d\n", __func__, status); |
| return status; |
| } |
| |
| status = pbus_.CompositeDeviceAdd(&display_dev, components, countof(components), 1); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s: CompositeDeviceAdd failed: %d\n", __FUNCTION__, status); |
| return status; |
| } |
| |
| return ZX_OK; |
| } |
| |
| } // namespace sherlock |