| // Copyright 2018 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include <fuchsia/hardware/sdmmc/c/banjo.h> |
| #include <lib/ddk/binding.h> |
| #include <lib/ddk/debug.h> |
| #include <lib/ddk/device.h> |
| #include <lib/ddk/platform-defs.h> |
| #include <lib/ddk/hw/reg.h> |
| #include <lib/mmio/mmio.h> |
| #include <lib/zx/handle.h> |
| |
| #include <lib/ddk/metadata.h> |
| #include <ddk/metadata/gpt.h> |
| #include <soc/aml-common/aml-sdmmc.h> |
| #include <soc/aml-s905d3/s905d3-gpio.h> |
| #include <soc/aml-s905d3/s905d3-hw.h> |
| |
| #include "nelson-gpios.h" |
| #include "nelson.h" |
| |
| namespace nelson { |
| |
| namespace { |
| |
| constexpr pbus_mmio_t emmc_mmios[] = { |
| { |
| .base = S905D3_EMMC_C_SDIO_BASE, |
| .length = S905D3_EMMC_C_SDIO_LENGTH, |
| }, |
| }; |
| |
| constexpr pbus_irq_t emmc_irqs[] = { |
| { |
| .irq = S905D3_EMMC_C_SDIO_IRQ, |
| .mode = ZX_INTERRUPT_MODE_EDGE_HIGH, |
| }, |
| }; |
| |
| constexpr pbus_bti_t emmc_btis[] = { |
| { |
| .iommu_index = 0, |
| .bti_id = BTI_EMMC, |
| }, |
| }; |
| |
| static aml_sdmmc_config_t config = { |
| .supports_dma = true, |
| // As per AMlogic, on S912 chipset, HS400 mode can be operated at 125MHZ or low. |
| .min_freq = 400000, |
| .max_freq = 120000000, |
| .version_3 = true, |
| .prefs = SDMMC_HOST_PREFS_DISABLE_HS400, |
| }; |
| |
| static const guid_map_t guid_map[] = { |
| {"misc", GUID_ABR_META_VALUE}, {"boot_a", GUID_ZIRCON_A_VALUE}, |
| {"boot_b", GUID_ZIRCON_B_VALUE}, {"cache", GUID_ZIRCON_R_VALUE}, |
| {"vbmeta_a", GUID_VBMETA_A_VALUE}, {"vbmeta_b", GUID_VBMETA_B_VALUE}, |
| {"reserved_c", GUID_VBMETA_R_VALUE}, {"data", GUID_FVM_VALUE}, |
| }; |
| |
| static_assert(sizeof(guid_map) / sizeof(guid_map[0]) <= DEVICE_METADATA_GUID_MAP_MAX_ENTRIES); |
| |
| static const pbus_metadata_t emmc_metadata[] = { |
| { |
| .type = DEVICE_METADATA_PRIVATE, |
| .data_buffer = reinterpret_cast<const uint8_t*>(&config), |
| .data_size = sizeof(config), |
| }, |
| { |
| .type = DEVICE_METADATA_GUID_MAP, |
| .data_buffer = reinterpret_cast<const uint8_t*>(guid_map), |
| .data_size = sizeof(guid_map), |
| }, |
| }; |
| |
| static const pbus_boot_metadata_t emmc_boot_metadata[] = { |
| { |
| .zbi_type = DEVICE_METADATA_PARTITION_MAP, |
| .zbi_extra = 0, |
| }, |
| }; |
| |
| static pbus_dev_t emmc_dev = []() { |
| pbus_dev_t dev = {}; |
| dev.name = "nelson-emmc"; |
| dev.vid = PDEV_VID_AMLOGIC; |
| dev.pid = PDEV_PID_GENERIC; |
| dev.did = PDEV_DID_AMLOGIC_SDMMC_C; |
| dev.mmio_list = emmc_mmios; |
| dev.mmio_count = countof(emmc_mmios); |
| dev.irq_list = emmc_irqs; |
| dev.irq_count = countof(emmc_irqs); |
| dev.bti_list = emmc_btis; |
| dev.bti_count = countof(emmc_btis); |
| dev.metadata_list = emmc_metadata; |
| dev.metadata_count = countof(emmc_metadata); |
| dev.boot_metadata_list = emmc_boot_metadata; |
| dev.boot_metadata_count = countof(emmc_boot_metadata); |
| return dev; |
| }(); |
| |
| static const zx_bind_inst_t root_match[] = { |
| BI_MATCH(), |
| }; |
| static const zx_bind_inst_t gpio_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_GPIO), |
| BI_MATCH_IF(EQ, BIND_GPIO_PIN, GPIO_EMMC_RESET), |
| }; |
| static const device_fragment_part_t gpio_fragment[] = { |
| {countof(root_match), root_match}, |
| {countof(gpio_match), gpio_match}, |
| }; |
| static const device_fragment_t fragments[] = { |
| {"gpio", countof(gpio_fragment), gpio_fragment}, |
| }; |
| |
| } // namespace |
| |
| zx_status_t Nelson::EmmcInit() { |
| // set alternate functions to enable EMMC |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D0, S905D3_EMMC_D0_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D1, S905D3_EMMC_D1_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D2, S905D3_EMMC_D2_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D3, S905D3_EMMC_D3_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D4, S905D3_EMMC_D4_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D5, S905D3_EMMC_D5_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D6, S905D3_EMMC_D6_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_D7, S905D3_EMMC_D7_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_CLK, S905D3_EMMC_CLK_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_RST, S905D3_EMMC_RST_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_CMD, S905D3_EMMC_CMD_FN); |
| gpio_impl_.SetAltFunction(S905D3_EMMC_DS, S905D3_EMMC_DS_FN); |
| |
| auto status = pbus_.CompositeDeviceAdd(&emmc_dev, reinterpret_cast<uint64_t>(fragments), |
| countof(fragments), UINT32_MAX); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s: CompositeDeviceAdd failed %d", __func__, status); |
| return status; |
| } |
| |
| return ZX_OK; |
| } |
| |
| } // namespace nelson |