| #!/bin/bash |
| # Copyright 2019 The Fuchsia Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| #### CATEGORY=Run, inspect and debug |
| ### Entry point for all Fuchsia tests (host, target and end-to-end) |
| |
| ## Usage: fx test [testName ...] |
| ## |
| ## Options: |
| ## -h, --help |
| ## --host If true, only runs host tests. The opposite of `--device` |
| ## -d, --device If true, only runs device tests. The opposite of `--host` |
| ## -p, --package Matches tests against their Fuchsia package Name |
| ## -c, --component Matches tests against their Fuchsia component Name. When |
| ## --package is also specified, results are filtered both by package |
| ## and component. |
| ## -a, --and When present, adds additional requirements to the preceding |
| ## `testName` filter |
| ## --printtests If true, prints the contents of `//out/default/tests.json` |
| ## --[no-]build If true, invokes `fx build` before running the test suite |
| ## (defaults to on) |
| ## --[no-]restrict-logs If true, passes a flag of the same name to the component test runner |
| ## (defaults to on) |
| ## --[no-]updateifinbase If true, invokes `fx update-if-in-base` before running device tests |
| ## (defaults to on) |
| ## --[no-]use-package-hash If true, uses the package Merkle root hash from the build artifacts when executing device tests |
| ## (defaults to on) |
| ## --info If true, prints the test specification in key:value format, and exits |
| ## -r, --random If true, randomizes test execution order |
| ## --fuzzy The Levenshtein distance threshold to use when generating suggestions |
| ## (defaults to "3") |
| ## --dry If true, does not invoke any tests |
| ## -f, --fail If true, halts test suite execution on the first failed test |
| ## --[no-]log If true, emits all output from all tests to a file. Turned on |
| ## when running real tests unless `--no-log` is passed. |
| ## --logpath If passed and if --no-log is not passed, customizes the |
| ## destination of the log artifact. |
| ## |
| ## Defaults to a timestamped file at the root of //out/default. |
| ## --limit If passed, ends test suite execution after N tests |
| ## -s, --slow When set to a non-zero value, triggers output for any test that |
| ## takes longer than N seconds to execute. |
| ## |
| ## Note: This has no impact if the -o flag is also set. |
| ## Note: The -s flag used to be an abbreviation for --simple. |
| ## (defaults to "2") |
| ## -R, --realm If passed, runs the tests in a named realm instead of a |
| ## randomized one. |
| ## --min-severity-logs Filters log output to only messages with this for device tests. |
| ## Valid severities: TRACE, DEBUG, INFO, WARN, ERROR, FATAL. |
| ## --[no-]exact If true, does not perform any fuzzy-matching on tests |
| ## --[no-]e2e If true, allows the execution of host tests that require a connected device or emulator, such as end-to-end tests. |
| ## --[no-]only-e2e If true, skips all non-e2e tests. The `--e2e` flag is redundant when passing this flag. |
| ## --skipped If true, prints a debug statement about each skipped test. |
| ## |
| ## Note: The old `-s` abbreviation now applies to `--simple`. |
| ## --simple If true, removes any color or decoration from output |
| ## -o, --output If true, also displays the output from passing tests |
| ## -u, --silenceunsupported If true, will reduce unsupported tests to a warning and continue |
| ## executing. This is dangerous outside of the local development |
| ## cycle, as "unsupported" tests are likely a problem with this |
| ## command and not the tests. |
| ## --test-filter Runs specific test cases in v2 suite. Run |
| ## 'fx shell run-test-suite --help' for more info about this flag. |
| ## --count Number of times to run the test. Run |
| ## 'fx shell run-test-suite --help' for more info about this flag. |
| ## --[no-]also-run-disabled-tests Whether to also run tests that have been marked disabled/ignored by |
| ## the test author. Run 'fx shell run-test-suite --help' for more info about this |
| ## flag. |
| ## --timeout Test timeout in seconds. Run 'fx shell run-test-suite --help' or |
| ## 'fx shell run-test-component --help' for more info about this flag. |
| ## -v, --verbose |
| ## |
| ## Examples: |
| ## |
| ## - Execute all tests |
| ## fx test |
| ## |
| ## - Execute the test component available at this URL |
| ## fx test fuchsia-pkg://fuchsia.com/myPackageName/#meta/componentName.cmx |
| ## |
| ## - Execute the test whose package URL's `package-name` component matches |
| ## the value. Runs all tests contained in this package. |
| ## fx test myPackageName |
| ## |
| ## - Execute the test whose package URL's `resource-path` component matches |
| ## the value. Runs only that test out of its containing package. |
| ## fx test componentName |
| ## |
| ## - Execute all tests at and below this path (usually host tests) |
| ## fx test //subtree/path |
| ## |
| ## - Multiple test names can be supplied in the same invocation, e.g.: |
| ## fx test //subtree/path //another/path fuchsia-pkg://... |
| ## |
| ## The value(s) supplied for `testName` can be fully-formed Fuchsia Package URLs, |
| ## Fuchsia package names, or Fuchsia-tree directories. Partial tree paths |
| ## will execute all descendent tests. |
| |
| source "$(cd "$(dirname "${BASH_SOURCE[0]}")" >/dev/null 2>&1 && pwd)"/lib/vars.sh || exit $? |
| fx-config-read |
| |
| export FUCHSIA_DEVICE_ADDR="$(get-fuchsia-device-addr)" |
| |
| if [[ "$FUCHSIA_DEVICE_ADDR" == "::1" && -z "$SL4F_HTTP_PORT" ]]; then |
| # Device addr is localhost, assume that means that ports were forwarded with |
| # fx serve-remote from a remote workstation/laptop with a device attached. |
| export SL4F_HTTP_PORT=9080 |
| fi |
| |
| port="$(get-device-ssh-port)" |
| if [[ -n "${port}" ]]; then |
| export FUCHSIA_SSH_PORT="${port}" |
| fi |
| |
| FUCHSIA_SSH_KEY="$(get-ssh-privkey)" || exit $? |
| export FUCHSIA_SSH_KEY |
| export FUCHSIA_TEST_OUTDIR="${FUCHSIA_OUT_DIR}/test_out/$(date +'%F-%H:%M:%S')" |
| |
| _args=( |
| "${PREBUILT_DART_DIR}/bin/dart" |
| "--enable-experiment=non-nullable" |
| "--no-sound-null-safety" |
| "--packages=${FUCHSIA_DIR}/scripts/fxtest/package_config.json" |
| "${FUCHSIA_DIR}/scripts/fxtest/bin/main.dart" |
| ) |
| |
| # TODO(fxbug.dev/53267): Using tput colors is more reliable than letting Dart do its |
| # own terminal detection. Remove once Dart can do its own detection more |
| # robustly. |
| if [[ ! -t 1 ]] || ! tput colors >/dev/null 2>&1; then |
| _args+=("--simple") |
| fi |
| |
| exec "${_args[@]}" "$@" |
