| // Copyright 2019 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "audio-stream-out.h" |
| |
| #include <lib/zx/clock.h> |
| |
| #include <optional> |
| #include <utility> |
| |
| #include <ddk/binding.h> |
| #include <ddk/debug.h> |
| #include <ddk/driver.h> |
| #include <ddk/metadata.h> |
| #include <ddk/platform-defs.h> |
| #include <ddktl/metadata/audio.h> |
| #include <ddktl/protocol/composite.h> |
| #include <fbl/array.h> |
| #include <soc/mt8167/mt8167-clk-regs.h> |
| |
| namespace { |
| |
| // Expects L+R. |
| constexpr size_t kNumberOfChannels = 2; |
| // Calculate ring buffer size for 1 second of 16-bit, 48kHz. |
| constexpr size_t kRingBufferSize = |
| fbl::round_up<size_t, size_t>(48000 * 2 * kNumberOfChannels, PAGE_SIZE); |
| } // namespace |
| |
| namespace audio { |
| namespace mt8167 { |
| |
| Mt8167AudioStreamOut::Mt8167AudioStreamOut(zx_device_t* parent) |
| : SimpleAudioStream(parent, false), pdev_(parent) {} |
| |
| zx_status_t Mt8167AudioStreamOut::InitPdev() { |
| ddk::CompositeProtocolClient composite(parent()); |
| if (!composite.is_valid()) { |
| zxlogf(ERROR, "Could not get composite protocol"); |
| return ZX_ERR_NO_RESOURCES; |
| } |
| |
| pdev_ = ddk::PDev(composite); |
| if (!pdev_.is_valid()) { |
| return ZX_ERR_NO_RESOURCES; |
| } |
| |
| size_t actual; |
| metadata::CodecType codec; |
| zx_status_t status = device_get_metadata(parent(), DEVICE_METADATA_PRIVATE, &codec, |
| sizeof(metadata::CodecType), &actual); |
| if (status != ZX_OK || sizeof(metadata::CodecType) != actual) { |
| zxlogf(ERROR, "%s device_get_metadata failed %d", __FILE__, status); |
| return status; |
| } |
| |
| status = codec_.SetProtocol(ddk::CodecProtocolClient(composite, "codec")); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s could set codec protocol %d", __FUNCTION__, status); |
| return ZX_ERR_NO_RESOURCES; |
| } |
| |
| status = pdev_.GetBti(0, &bti_); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s could not obtain bti %d", __FUNCTION__, status); |
| return status; |
| } |
| |
| std::optional<ddk::MmioBuffer> mmio_audio, mmio_clk, mmio_pll; |
| status = pdev_.MapMmio(0, &mmio_audio); |
| if (status != ZX_OK) { |
| return status; |
| } |
| status = pdev_.MapMmio(1, &mmio_clk); |
| if (status != ZX_OK) { |
| return status; |
| } |
| status = pdev_.MapMmio(2, &mmio_pll); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| // I2S2 corresponds to I2S_8CH. |
| mt_audio_ = MtAudioOutDevice::Create(*std::move(mmio_audio), MtAudioOutDevice::I2S2); |
| if (mt_audio_ == nullptr) { |
| zxlogf(ERROR, "%s failed to create device", __FUNCTION__); |
| return ZX_ERR_NO_MEMORY; |
| } |
| |
| // Initialize the ring buffer |
| InitBuffer(kRingBufferSize); |
| |
| mt_audio_->SetBuffer(pinned_ring_buffer_.region(0).phys_addr, pinned_ring_buffer_.region(0).size); |
| |
| // Configure XO and PLLs for interface aud1. |
| |
| // Power up playback for I2S2 by clearing the power down bit for div1. |
| CLK_SEL_9::Get().ReadFrom(&*mmio_clk).set_apll12_div1_pdn(0).WriteTo(&*mmio_clk); |
| |
| // Enable aud1 PLL. |
| APLL1_CON0::Get().ReadFrom(&*mmio_pll).set_APLL1_EN(1).WriteTo(&*mmio_pll); |
| zx_nanosleep(zx_deadline_after(ZX_MSEC(2))); // For I2S clocks to settle, arbitrary. |
| |
| // Reset and initialize codec after we have configured I2S. |
| status = codec_.Reset(); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| status = codec_.SetBridgedMode(false); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| DaiFormat format = {}; |
| format.number_of_channels = 2; |
| format.channels_to_use_bitmask = 3; |
| format.sample_format = SampleFormat::PCM_SIGNED; |
| format.frame_format = FrameFormat::I2S; |
| format.frame_rate = 48'000; |
| format.bits_per_sample = 32; |
| format.bits_per_slot = 32; |
| status = codec_.SetDaiFormat(format); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| return ZX_OK; |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::Init() { |
| zx_status_t status; |
| |
| status = InitPdev(); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| status = AddFormats(); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| // Get our gain capabilities. |
| auto state = codec_.GetGainState(); |
| if (state.is_error()) { |
| zxlogf(ERROR, "%s failed to get gain state", __FILE__); |
| return state.error_value(); |
| } |
| cur_gain_state_.cur_gain = state->gain; |
| cur_gain_state_.cur_mute = state->muted; |
| cur_gain_state_.cur_agc = state->agc_enabled; |
| |
| auto format = codec_.GetGainFormat(); |
| if (format.is_error()) { |
| zxlogf(ERROR, "%s failed to get gain format", __FILE__); |
| return format.error_value(); |
| } |
| |
| cur_gain_state_.min_gain = format->min_gain; |
| cur_gain_state_.max_gain = format->max_gain; |
| cur_gain_state_.gain_step = format->gain_step; |
| cur_gain_state_.can_mute = false; |
| cur_gain_state_.can_agc = false; |
| |
| snprintf(device_name_, sizeof(device_name_), "mt8167-audio-out"); |
| snprintf(mfr_name_, sizeof(mfr_name_), "unknown"); |
| snprintf(prod_name_, sizeof(prod_name_), "mt8167"); |
| |
| unique_id_ = AUDIO_STREAM_UNIQUE_ID_BUILTIN_SPEAKERS; |
| |
| // TODO(mpuryear): change this to the domain of the clock received from the board driver |
| clock_domain_ = 0; |
| |
| return ZX_OK; |
| } |
| |
| // Timer handler for sending out position notifications. |
| void Mt8167AudioStreamOut::ProcessRingNotification() { |
| ScopedToken t(domain_token()); |
| ZX_ASSERT(us_per_notification_ != 0); |
| |
| notify_timer_.PostDelayed(dispatcher(), zx::usec(us_per_notification_)); |
| |
| audio_proto::RingBufPositionNotify resp = {}; |
| resp.hdr.cmd = AUDIO_RB_POSITION_NOTIFY; |
| |
| resp.monotonic_time = zx::clock::get_monotonic().get(); |
| resp.ring_buffer_pos = mt_audio_->GetRingPosition(); |
| NotifyPosition(resp); |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::ChangeFormat(const audio_proto::StreamSetFmtReq& req) { |
| fifo_depth_ = mt_audio_->fifo_depth(); |
| external_delay_nsec_ = 0; |
| |
| // At this time only one format is supported, and hardware is initialized |
| // during driver binding, so nothing to do at this time. |
| return ZX_OK; |
| } |
| |
| void Mt8167AudioStreamOut::ShutdownHook() { mt_audio_->Shutdown(); } |
| |
| zx_status_t Mt8167AudioStreamOut::SetGain(const audio_proto::SetGainReq& req) { |
| GainState state; |
| state.gain = req.gain; |
| state.muted = cur_gain_state_.cur_mute; |
| state.agc_enabled = cur_gain_state_.cur_agc; |
| codec_.SetGainState(std::move(state)); |
| cur_gain_state_.cur_gain = state.gain; |
| return ZX_OK; |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::GetBuffer(const audio_proto::RingBufGetBufferReq& req, |
| uint32_t* out_num_rb_frames, zx::vmo* out_buffer) { |
| uint32_t rb_frames = static_cast<uint32_t>(pinned_ring_buffer_.region(0).size / frame_size_); |
| |
| if (req.min_ring_buffer_frames > rb_frames) { |
| return ZX_ERR_OUT_OF_RANGE; |
| } |
| zx_status_t status; |
| constexpr uint32_t rights = ZX_RIGHT_READ | ZX_RIGHT_WRITE | ZX_RIGHT_MAP | ZX_RIGHT_TRANSFER; |
| status = ring_buffer_vmo_.duplicate(rights, out_buffer); |
| if (status != ZX_OK) { |
| return status; |
| } |
| |
| *out_num_rb_frames = rb_frames; |
| |
| mt_audio_->SetBuffer(pinned_ring_buffer_.region(0).phys_addr, rb_frames * frame_size_); |
| |
| return ZX_OK; |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::Start(uint64_t* out_start_time) { |
| *out_start_time = mt_audio_->Start(); |
| uint32_t notifs = LoadNotificationsPerRing(); |
| if (notifs) { |
| us_per_notification_ = static_cast<uint32_t>(1000 * pinned_ring_buffer_.region(0).size / |
| (frame_size_ * 48 * notifs)); |
| notify_timer_.PostDelayed(dispatcher(), zx::usec(us_per_notification_)); |
| } else { |
| us_per_notification_ = 0; |
| } |
| return ZX_OK; |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::Stop() { |
| notify_timer_.Cancel(); |
| us_per_notification_ = 0; |
| mt_audio_->Stop(); |
| return ZX_OK; |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::AddFormats() { |
| fbl::AllocChecker ac; |
| supported_formats_.reserve(1, &ac); |
| if (!ac.check()) { |
| zxlogf(ERROR, "Out of memory, can not create supported formats list"); |
| return ZX_ERR_NO_MEMORY; |
| } |
| |
| // Add the range for basic audio support. |
| audio_stream_format_range_t range; |
| |
| range.min_channels = kNumberOfChannels; |
| range.max_channels = kNumberOfChannels; |
| range.sample_formats = AUDIO_SAMPLE_FORMAT_16BIT; |
| range.min_frames_per_second = 48000; |
| range.max_frames_per_second = 48000; |
| range.flags = ASF_RANGE_FLAG_FPS_48000_FAMILY; |
| |
| supported_formats_.push_back(range); |
| |
| return ZX_OK; |
| } |
| |
| zx_status_t Mt8167AudioStreamOut::InitBuffer(size_t size) { |
| zx_status_t status; |
| status = zx_vmo_create_contiguous(bti_.get(), size, 0, ring_buffer_vmo_.reset_and_get_address()); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s failed to allocate ring buffer vmo - %d", __FUNCTION__, status); |
| return status; |
| } |
| |
| status = pinned_ring_buffer_.Pin(ring_buffer_vmo_, bti_, ZX_VM_PERM_READ | ZX_VM_PERM_WRITE); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s failed to pin ring buffer vmo - %d", __FUNCTION__, status); |
| return status; |
| } |
| if (pinned_ring_buffer_.region_count() != 1) { |
| zxlogf(ERROR, "%s buffer is not contiguous", __FUNCTION__); |
| return ZX_ERR_NO_MEMORY; |
| } |
| |
| return ZX_OK; |
| } |
| |
| } // namespace mt8167 |
| } // namespace audio |
| |
| static zx_status_t mt_audio_out_bind(void* ctx, zx_device_t* device) { |
| auto stream = audio::SimpleAudioStream::Create<audio::mt8167::Mt8167AudioStreamOut>(device); |
| if (stream == nullptr) { |
| return ZX_ERR_NO_MEMORY; |
| } |
| |
| return ZX_OK; |
| } |
| |
| static constexpr zx_driver_ops_t mt_audio_out_driver_ops = []() { |
| zx_driver_ops_t ops = {}; |
| ops.version = DRIVER_OPS_VERSION; |
| ops.bind = mt_audio_out_bind; |
| return ops; |
| }(); |
| |
| // clang-format off |
| ZIRCON_DRIVER_BEGIN(mt8167_audio_out, mt_audio_out_driver_ops, "zircon", "0.1", 4) |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_COMPOSITE), |
| BI_ABORT_IF(NE, BIND_PLATFORM_DEV_VID, PDEV_VID_MEDIATEK), |
| BI_ABORT_IF(NE, BIND_PLATFORM_DEV_PID, PDEV_PID_MEDIATEK_8167S_REF), |
| BI_MATCH_IF(EQ, BIND_PLATFORM_DEV_DID, PDEV_DID_MEDIATEK_AUDIO_OUT), |
| ZIRCON_DRIVER_END(mt8167_audio_out) |
| // clang-format on |