| // Copyright 2019 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include <ddk/debug.h> |
| #include <ddk/device.h> |
| #include <ddk/metadata.h> |
| #include <ddk/metadata/lights.h> |
| #include <ddk/platform-defs.h> |
| #include <ddk/protocol/platform/bus.h> |
| |
| #include "as370.h" |
| #include "src/devices/board/drivers/as370/as370-bind.h" |
| |
| namespace board_as370 { |
| |
| zx_status_t As370::LightInit() { |
| // setup LED/Touch reset pin |
| auto status = gpio_impl_.SetAltFunction(4, 0); // 0 - GPIO mode |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s: GPIO SetAltFunction failed: %d", __func__, status); |
| return status; |
| } |
| |
| // Reset LED/Touch device |
| // Note: GPIO is shared between LED and Touch. Hence reset is done only here. |
| gpio_impl_.Write(4, 1); |
| gpio_impl_.Write(4, 0); |
| gpio_impl_.Write(4, 1); |
| |
| constexpr LightsConfig kConfigs[] = { |
| {.brightness = true, .rgb = true, .init_on = false, .group_id = 1}, |
| {.brightness = true, .rgb = true, .init_on = false, .group_id = 0}, |
| {.brightness = true, .rgb = true, .init_on = false, .group_id = 0}, |
| {.brightness = true, .rgb = true, .init_on = false, .group_id = 0}, |
| {.brightness = true, .rgb = true, .init_on = false, .group_id = 0}, |
| {.brightness = true, .rgb = true, .init_on = false, .group_id = 1}, |
| }; |
| using LightName = char[ZX_MAX_NAME_LEN]; |
| constexpr LightName kLightGroupNames[] = {"GROUP_OF_4", "GROUP_OF_2"}; |
| static const pbus_metadata_t light_metadata[] = { |
| { |
| .type = DEVICE_METADATA_LIGHTS, |
| .data_buffer = &kConfigs, |
| .data_size = sizeof(kConfigs), |
| }, |
| { |
| .type = DEVICE_METADATA_LIGHTS_GROUP_NAME, |
| .data_buffer = &kLightGroupNames, |
| .data_size = sizeof(kLightGroupNames), |
| }, |
| }; |
| |
| // Composite binding rules for TI LED driver. |
| static const zx_bind_inst_t root_match[] = { |
| BI_MATCH(), |
| }; |
| |
| static const zx_bind_inst_t i2c_match[] = { |
| BI_ABORT_IF(NE, BIND_PROTOCOL, ZX_PROTOCOL_I2C), |
| BI_ABORT_IF(NE, BIND_I2C_BUS_ID, 0x0), |
| BI_MATCH_IF(EQ, BIND_I2C_ADDRESS, 0x29), |
| }; |
| |
| static const device_fragment_part_t i2c_fragment[] = { |
| {countof(root_match), root_match}, |
| {countof(i2c_match), i2c_match}, |
| }; |
| |
| static const device_fragment_t fragments[] = { |
| {"i2c", countof(i2c_fragment), i2c_fragment}, |
| }; |
| |
| pbus_dev_t light_dev = {}; |
| light_dev.name = "lp5018-light"; |
| light_dev.vid = PDEV_VID_TI; |
| light_dev.pid = PDEV_PID_TI_LP5018; |
| light_dev.did = PDEV_DID_TI_LED; |
| light_dev.metadata_list = light_metadata; |
| light_dev.metadata_count = countof(light_metadata); |
| |
| status = pbus_.CompositeDeviceAdd(&light_dev, fragments, countof(fragments), UINT32_MAX); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "%s: CompositeDeviceAdd failed %d", __FUNCTION__, status); |
| return status; |
| } |
| |
| return ZX_OK; |
| } |
| |
| } // namespace board_as370 |