blob: f85574753789d62a6fde90ba914479c9206ee645 [file] [log] [blame]
// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
library fuchsia.sysmem;
using zx;
/// A BufferCollectionToken is not a BufferCollection, but rather a way to
/// identify a potential shared BufferCollection prior to the BufferCollection
/// being allocated.
///
/// We use a channel for the BufferCollectionToken instead of a single eventpair
/// (pair) because this way we can detect error conditions like a participant
/// dying mid-create.
[Discoverable, Layout = "Simple"]
protocol BufferCollectionToken {
/// The initiator or a participant can send Duplicate() as part of creating
/// another participant-side handle to the same logical
/// BufferCollectionToken.
///
/// This method is used to hand the logical token to all participants so all
/// participants can provide constraints to sysmem for the overall
/// BufferCollection to achieve the goal of allocating buffers compatible
/// with all participants.
///
/// The Duplicate() message is intentionally available only on
/// BufferCollectionToken not BufferCollection.
///
/// The token is separate from BufferCollection so that participants contact
/// sysmem directly, so that participants are only trusting their environment
/// for who sysmem is (fake token mitigation), not an initiator. Only after
/// successful BindSharedCollection does a participant know that the token
/// was a real sysmem token. In contrast, if we had Duplicate() directly on
/// BufferCollection, an initiator could attempt to serve the
/// BufferCollection channel itself, which would allow for some problematic
/// possibilities.
///
/// All the BufferCollectionToken channels of a logical token must be turned
/// in via BindSharedCollection() for a BufferCollection to be successfully
/// created. Else the BufferCollection channel will close.
///
/// When a client calls BindSharedCollection() to turn in a
/// BufferCollectionToken, the server will process all Duplicate() messages
/// before closing down the BufferCollectionToken. This allows the client
/// to Duplicate() and immediately turn in the BufferCollectionToken using
/// BindSharedCollection, then later transfer the client end of token_request
/// to another participant - the server will notice the existence of the
/// token_request before considering this BufferCollectionToken fully closed.
///
/// `rights_attenuation_mask` rights bits that are zero in this mask will be
/// absent in the buffer VMO rights obtainable via the client end of
/// token_request. This allows an initiator or intermediary participant
/// to attenuate the rights available to a participant. This may not be the
/// only mechanism that attenuates rights on the VMO handles obtainable via
/// the client end of token_request. This does not allow a participant
/// to gain rights that the participant doesn't already have. The value
/// ZX_RIGHT_SAME_RIGHTS can be used to specify that no attenuation should
/// be applied.
///
/// `token_request` is the server end of a BufferCollectionToken channel.
/// The client end of this channel acts as another handle to the same logical
/// BufferCollectionToken. Typically the sender of Duplicate() will transfer
/// the client end corresponding to collection_request to a/another
/// participant running in a separate process, but it's also fine for the
/// additional logical participant to be in the same process.
///
/// After sending one or more Duplicate() messages, and before sending the
/// created tokens to other participants (or to other Allocator channels),
/// the client should send a Sync() and wait for its response. The Sync()
/// call can be made on the token, or on the BufferCollection obtained by
/// passing this token to BindSharedCollection(). Either will ensure that
/// the server knows about the tokens created via Duplicate() before the
/// other participant sends the token to the server via separate Allocator
/// channel. If a client is using FIDL C generated code and doesn't want to
/// block waiting for a response message, the other option is to notice
/// arrival of the BufferCollectionEvents::OnBufferCollectionCreated() event
/// after turning in this token for a BufferCollection.
//
// TODO(dustingreen): Consider other mechanisms to ensure the token created
// here is recognized by the server.
Duplicate(uint32 rights_attenuation_mask,
request<BufferCollectionToken> token_request);
/// Ensure that previous Duplicate() messages have been received server side,
/// so that it's safe to send the client end of token_request to another
/// participant knowing the server will recognize the token when it's sent
/// into BindSharedCollection by the other participant.
///
/// Other options include waiting for each Duplicate() to complete
/// individually, or calling Sync() on BufferCollection after this token has
/// been turned in via BindSharedCollection(), or noticing arrival of
/// BufferCollectionEvents::OnDuplicatedTokensKnownByServer().
Sync() -> ();
/// Normally a participant will convert the token into a BufferCollection
/// view, but a particpant is also free to Close() the token (and then close
/// the channel immediately or shortly later in response to server closing
/// its end), which avoids causing LogicalBufferCollection failure.
/// Normally an unexpected token channel close will cause
/// LogicalBufferCollection failure.
Close();
};
/// BufferCollection is a connection directly from a participant to sysmem re.
/// a logical BufferCollection; typically the logical BufferCollection is shared
/// with other participants. In other words, an instance of the BufferCollection
/// interface is a view of a "LogicalBufferCollection".
///
/// This connection exists to facilitate async indication of when the logical
/// BufferCollection has been populated with buffers.
///
/// Also, the channel's closure by the server is an indication to the client
/// that the client should close all VMO handles that were obtained from the
/// BufferCollection ASAP.
///
/// Also, this interface may in future allow specifying constraints in other
/// ways, and may allow for back-and-forth negotiation of constraints to some
/// degree.
///
/// This interface may in future allow for more than 64 VMO handles per
/// BufferCollection, but currently the limit is 64.
///
/// This interface may in future allow for allocating/deallocating single
/// buffers.
///
/// Some initiators may wait a short duration until all old logical
/// BufferCollection VMO handles have closed (or until the short duration times
/// out) before allocating a new BufferCollection, to help control physical
/// memory fragmentation and avoid overlap of buffer allocation lifetimes for
/// the old and new collections. Collections can be large enough that it's worth
/// avoiding allocation overlap (in time).
[Discoverable, Layout = "Simple"]
protocol BufferCollection {
/// At least for now, the only way to get events from a BufferCollection is
/// to set a reverse BufferCollectionEvents channel. This can be sent up to
/// once at any point during BufferCollection channel lifetime. All events
/// are one-shot events, and will be sent immediately via `events` if the
/// one-shot event's condition has already become true (once true will stay
/// true; only goes from false to true once).
///
/// `events` is the client end of a BufferCollectionEvents which will be sent
/// one-way messages indicating events relevant to this BufferCollection
/// channel (some may be specific to this BufferCollection channel and some
/// may be relevant to the overall logical BufferCollection).
SetEventSink(BufferCollectionEvents events);
/// See comments on BufferCollectionToken::Sync().
Sync() -> ();
/// Provide BufferCollectionConstraints to the logical BufferCollection.
///
/// Participants with read but not write can only call SetConstraints() once.
///
/// Participants with write can call SetConstraints() more than once. The
/// initial buffer allocation will use the constraints in the first call to
/// SetConstraints(). Among other things, this allows a decoder to attempt
/// to allocate a new buffer that's larger to hold an output frame that's
/// larger.
///
/// Sometimes the initiator is a participant only in the sense of wanting to
/// keep an eye on success/failure to populate with buffers, and zx.status on
/// failure. In that case, `has_constraints` can be false, and `constraints`
/// will be ignored.
///
/// VMO handles will not be provided to the client that sends null
/// constraints - that can be intentional for an initiator that doesn't need
/// VMO handles. Not having VMO handles doesn't prevent the initator from
/// adjusting which portion of a buffer is considered valid and similar, but
/// the initiator can't hold a VMO handle open to prevent the logical
/// BufferCollection from cleaning up if the logical BufferCollection needs
/// to go away regardless of the initiator's degree of involvement for
/// whatever reason.
///
/// For population of buffers to be attempted, all holders of a
/// BufferCollection client channel need to call SetConstraints() before
/// sysmem will attempt to allocate buffers.
///
/// `has_constraints` if false, the constraints are effectively null, and
/// `constraints` are ignored. The sender of null constraints won't get any
/// VMO handles in BufferCollectionInfo, but can still find out how many
/// buffers were allocated and can still refer to buffers by their
/// buffer_index.
///
/// `constraints` are constraints on the buffer collection.
SetConstraints(bool has_constraints,
BufferCollectionConstraints constraints);
/// This request completes when buffers have been allocated, responds with
/// some failure detail if allocation has been attempted but failed.
///
/// The following must occur before buffers will be allocated:
/// * All BufferCollectionToken(s) of the logical BufferCollectionToken
/// must be turned in via BindSharedCollection().
/// * All BufferCollection(s) of the logical BufferCollection must have had
/// SetConstraints() sent to them.
///
/// A caller using C generated FIDL code who wishes not to block a thread in
/// a zx_channel_call() for a potentially fairly long duration on this
/// message/response can use SetEventSink() and
/// BufferCollectionEvents.OnBuffersPopulated() instead.
///
/// This method is still legal to call despite use of OnBuffersPopulated(),
/// but in that case the additional BufferCollectionInfo returned here will
/// include handles that are redundant with other handles in the
/// BufferCollectionInfo delivered via OnBuffersPopulated() (separate handle
/// but same underlying VMO objects), so most clients that bother calling
/// SetEventSink() will prefer to receive BufferCollectionInfo via
/// OnBuffersPopulated(). This method is mostly here for clients that don't
/// call SetEventSink().
///
/// Returns `ZX_OK` if successful.
/// Returns `ZX_ERR_NO_MEMORY` if the request is valid but cannot be
/// fulfilled due to resource exhaustion.
/// Returns `ZX_ERR_ACCESS_DENIED` if the caller is not permitted to
/// obtain the buffers it requested.
/// Returns `ZX_ERR_INVALID_ARGS` if the request is malformed.
/// Returns `ZX_ERR_NOT_SUPPORTED` if request is valid but cannot be
/// satisfied, perhaps due to hardware limitations.
///
/// `buffer_collection_info` has the VMO handles and other related info.
WaitForBuffersAllocated()
-> (zx.status status, BufferCollectionInfo_2 buffer_collection_info);
/// This returns the same result code as WaitForBuffersAllocated if the
/// buffer collection has been allocated or failed, or `ZX_ERR_UNAVAILABLE`
/// if WaitForBuffersAllocated would block.
CheckBuffersAllocated() -> (zx.status status);
/// The CloseBuffer() doesn't immediately force all VMO handles to that
/// buffer to close, but it does close any handle held by sysmem, and does
/// notify all participants of the desire to close the buffer at which point
/// each participant that's listening may close their handle to the buffer.
///
/// Only a particpant with write can do this. Coordination among multiple
/// participants with write is outside of the scope of this interface.
///
/// `buffer_index` indicates which buffer to close. If the buffer is already
/// closed this has no effect (idempotent).
CloseSingleBuffer(uint64 buffer_index);
/// This allocates a new buffer that is consistent with the most recent call
/// to SetConstraints(), if possible. If not possible, this indicates the
/// failure via OnNewBufferAllocated().
///
/// Only a participant with write can do this. Coordination among multiple
/// participants with write is outside the scope of this interface.
///
/// The participant is (intentionally) never informed of other participant's
/// constraints.
AllocateSingleBuffer(uint64 buffer_index);
/// Completes when AllocateBuffer is done. Callers who wish to avoid
/// blocking a thread while waiting can use OnAllocateSingleBufferDone()
/// instead.
WaitForSingleBufferAllocated(uint64 buffer_index)
-> (zx.status status, SingleBufferInfo buffer_info);
/// A participant can use this message to have sysmem verify that this
/// buffer_index exists. This message is intentionally ignored by the
/// server if the buffer_index _does_ exist. In that case, the client will
/// see OnAllocateSingleBufferDone() soon with status == `ZX_OK` (if the
/// client hasn't already seen that message). If on the other hand the
/// buffer_index does not exist, this message causes the server to send
/// OnAllocateSingleBufferDone() with status == `ZX_ERR_NOT_FOUND`. A
/// particpant will typically use this when the participant receives a new
/// buffer_index that the participant doesn't yet know about, to ensure that
/// the participant won't be waiting forever for the
/// OnAllocateSingleBufferDone() message regarding this buffer_index.
CheckSingleBufferAllocated(uint64 buffer_index);
/// The server handles unexpected failure of a BufferCollection by failing
/// the whole LogicalBufferCollection. Partly this is to expedite closing
/// VMO handles. If a participant would like to cleanly close a
/// BufferCollection view without causing LogicalBufferCollection failure,
/// the participant can send Close() before closing the client end of the
/// BufferCollection channel. If this is the last BufferCollection view, the
/// LogicalBufferCollection will still go away.
Close();
};
/// This interface intentionally doesn't include any event for
/// OnOldBufferClosed(), because such an event could arrive at a participant too
/// soon to be useful. Instead, such an indication should be made in-band within
/// FIDL interfaces that deliver packets to downstream participants.
[Discoverable, Layout = "Simple"]
protocol BufferCollectionEvents {
/// See comments on BufferCollectionToken::Sync().
///
/// This message only indicates that the server has reached the point where
/// it knows about previously created tokens Duplicate()ed from the token
/// used to create this BufferCollection.
OnDuplicatedTokensKnownByServer();
/// This event inidicates that buffer allocation is over, whether succesful
/// or failed.
///
/// This event will eventually be sent by the server (unless the
/// BufferCollection channel closes first).
///
/// `status`:
/// `ZX_OK` if successful.
/// `ZX_ERR_NO_MEMORY` if the request is valid but cannot be fulfilled due to
/// resource exhaustion.
/// `ZX_ERR_ACCESS_DENIED` if the caller is not permitted to obtain the
/// buffers it requested.
/// `ZX_ERR_INVALID_ARGS` if the request is malformed.
/// `ZX_ERR_NOT_SUPPORTED` if request is valid but cannot be satisfied,
/// perhaps due to hardware limitations.
///
/// `buffer_collection_info` The buffer information, including VMO handles.
/// If `status` is not `ZX_OK`, `buffer_collection_info` is default
/// initialized and contains no meaningful information.
OnBuffersAllocated(zx.status status,
BufferCollectionInfo_2 buffer_collection_info);
/// A participant can learn when a new buffer is allocated via this event.
/// The only participant that will see a failing status is the participant
/// that attempted the single buffer allocation. Other participants will
/// only see successful single buffer allocations.
///
/// `status`:
///
/// `ZX_OK` if successful. This can be seen by any participant (whether
/// sender of AllocateSingleBuffer() or not.)
///
/// `ZX_ERR_NOT_FOUND` if the buffer_index sent via
/// CheckSingleBufferAllocated() isn't known to the server. This can be seen
/// by any participant (whether sender of AllocateSingleBuffer() or not.)
///
/// These error codes are only ever seen by the sender of
/// AllocateSingleBuffer():
///
/// `ZX_ERR_NO_MEMORY` if the request is valid but cannot be fulfilled due to
/// resource exhaustion.
/// `ZX_ERR_ACCESS_DENIED` if the caller is not permitted to obtain the
/// buffers it requested.
/// `ZX_ERR_INVALID_ARGS` if the request is malformed.
/// `ZX_ERR_NOT_SUPPORTED` if request is valid but cannot be satisfied,
/// perhaps due to hardware limitations.
OnAllocateSingleBufferDone(zx.status status,
SingleBufferInfo buffer_info);
};