| // Copyright 2013 The Servo Project Developers. See the COPYRIGHT |
| // file at the top-level directory of this distribution. |
| // |
| // Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or |
| // http://www.apache.org/licenses/LICENSE-2.0> or the MIT license |
| // <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your |
| // option. This file may not be copied, modified, or distributed |
| // except according to those terms. |
| |
| use super::UnknownUnit; |
| use approxeq::ApproxEq; |
| use length::Length; |
| #[cfg(feature = "mint")] |
| use mint; |
| use point::{TypedPoint2D, TypedPoint3D, point2, point3}; |
| use size::{TypedSize2D, size2}; |
| use scale::TypedScale; |
| use trig::Trig; |
| use Angle; |
| use num::*; |
| use num_traits::{Float, NumCast, Signed}; |
| use core::fmt; |
| use core::ops::{Add, AddAssign, Div, DivAssign, Mul, MulAssign, Neg, Sub, SubAssign}; |
| use core::marker::PhantomData; |
| |
| /// A 2d Vector tagged with a unit. |
| #[derive(EuclidMatrix)] |
| #[repr(C)] |
| pub struct TypedVector2D<T, U> { |
| pub x: T, |
| pub y: T, |
| #[doc(hidden)] |
| pub _unit: PhantomData<U>, |
| } |
| |
| mint_vec!(TypedVector2D[x, y] = Vector2); |
| |
| /// Default 2d vector type with no unit. |
| /// |
| /// `Vector2D` provides the same methods as `TypedVector2D`. |
| pub type Vector2D<T> = TypedVector2D<T, UnknownUnit>; |
| |
| impl<T: Copy + Zero, U> TypedVector2D<T, U> { |
| /// Constructor, setting all components to zero. |
| #[inline] |
| pub fn zero() -> Self { |
| TypedVector2D::new(Zero::zero(), Zero::zero()) |
| } |
| |
| /// Convert into a 3d vector. |
| #[inline] |
| pub fn to_3d(&self) -> TypedVector3D<T, U> { |
| vec3(self.x, self.y, Zero::zero()) |
| } |
| } |
| |
| impl<T: fmt::Debug, U> fmt::Debug for TypedVector2D<T, U> { |
| fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { |
| write!(f, "({:?},{:?})", self.x, self.y) |
| } |
| } |
| |
| impl<T: fmt::Display, U> fmt::Display for TypedVector2D<T, U> { |
| fn fmt(&self, formatter: &mut fmt::Formatter) -> fmt::Result { |
| write!(formatter, "({},{})", self.x, self.y) |
| } |
| } |
| |
| impl<T, U> TypedVector2D<T, U> { |
| /// Constructor taking scalar values directly. |
| #[inline] |
| pub fn new(x: T, y: T) -> Self { |
| TypedVector2D { |
| x, |
| y, |
| _unit: PhantomData, |
| } |
| } |
| } |
| |
| impl<T: Copy, U> TypedVector2D<T, U> { |
| /// Constructor taking properly typed Lengths instead of scalar values. |
| #[inline] |
| pub fn from_lengths(x: Length<T, U>, y: Length<T, U>) -> Self { |
| vec2(x.0, y.0) |
| } |
| |
| /// Create a 3d vector from this one, using the specified z value. |
| #[inline] |
| pub fn extend(&self, z: T) -> TypedVector3D<T, U> { |
| vec3(self.x, self.y, z) |
| } |
| |
| /// Cast this vector into a point. |
| /// |
| /// Equivalent to adding this vector to the origin. |
| #[inline] |
| pub fn to_point(&self) -> TypedPoint2D<T, U> { |
| point2(self.x, self.y) |
| } |
| |
| /// Swap x and y. |
| #[inline] |
| pub fn yx(&self) -> Self { |
| vec2(self.y, self.x) |
| } |
| |
| /// Cast this vector into a size. |
| #[inline] |
| pub fn to_size(&self) -> TypedSize2D<T, U> { |
| size2(self.x, self.y) |
| } |
| |
| /// Returns self.x as a Length carrying the unit. |
| #[inline] |
| pub fn x_typed(&self) -> Length<T, U> { |
| Length::new(self.x) |
| } |
| |
| /// Returns self.y as a Length carrying the unit. |
| #[inline] |
| pub fn y_typed(&self) -> Length<T, U> { |
| Length::new(self.y) |
| } |
| |
| /// Drop the units, preserving only the numeric value. |
| #[inline] |
| pub fn to_untyped(&self) -> Vector2D<T> { |
| vec2(self.x, self.y) |
| } |
| |
| /// Tag a unit-less value with units. |
| #[inline] |
| pub fn from_untyped(p: &Vector2D<T>) -> Self { |
| vec2(p.x, p.y) |
| } |
| |
| #[inline] |
| pub fn to_array(&self) -> [T; 2] { |
| [self.x, self.y] |
| } |
| } |
| |
| impl<T, U> TypedVector2D<T, U> |
| where |
| T: Trig + Copy + Sub<T, Output = T>, |
| { |
| /// Returns the angle between this vector and the x axis between -PI and PI. |
| pub fn angle_from_x_axis(&self) -> Angle<T> { |
| Angle::radians(Trig::fast_atan2(self.y, self.x)) |
| } |
| } |
| |
| impl<T, U> TypedVector2D<T, U> |
| where |
| T: Copy + Mul<T, Output = T> + Add<T, Output = T> + Sub<T, Output = T>, |
| { |
| /// Dot product. |
| #[inline] |
| pub fn dot(self, other: Self) -> T { |
| self.x * other.x + self.y * other.y |
| } |
| |
| /// Returns the norm of the cross product [self.x, self.y, 0] x [other.x, other.y, 0].. |
| #[inline] |
| pub fn cross(self, other: Self) -> T { |
| self.x * other.y - self.y * other.x |
| } |
| |
| #[inline] |
| pub fn normalize(self) -> Self |
| where |
| T: Float, |
| { |
| self / self.length() |
| } |
| |
| /// Return the normalized vector even if the length is larger than the max value of Float. |
| #[inline] |
| pub fn robust_normalize(self) -> Self |
| where |
| T: Float, |
| { |
| let length = self.length(); |
| if length.is_infinite() { |
| let scaled = self / T::max_value(); |
| scaled / scaled.length() |
| } else { |
| self / length |
| } |
| } |
| |
| #[inline] |
| pub fn square_length(&self) -> T { |
| self.x * self.x + self.y * self.y |
| } |
| |
| #[inline] |
| pub fn length(&self) -> T |
| where |
| T: Float, |
| { |
| self.square_length().sqrt() |
| } |
| } |
| |
| impl<T, U> TypedVector2D<T, U> |
| where |
| T: Copy + One + Add<Output = T> + Sub<Output = T> + Mul<Output = T>, |
| { |
| /// Linearly interpolate between this vector and another vector. |
| /// |
| /// `t` is expected to be between zero and one. |
| #[inline] |
| pub fn lerp(&self, other: Self, t: T) -> Self { |
| let one_t = T::one() - t; |
| (*self) * one_t + other * t |
| } |
| } |
| |
| impl<T: Copy + Add<T, Output = T>, U> Add for TypedVector2D<T, U> { |
| type Output = Self; |
| fn add(self, other: Self) -> Self { |
| TypedVector2D::new(self.x + other.x, self.y + other.y) |
| } |
| } |
| |
| impl<T: Copy + Add<T, Output = T>, U> AddAssign for TypedVector2D<T, U> { |
| #[inline] |
| fn add_assign(&mut self, other: Self) { |
| *self = *self + other |
| } |
| } |
| |
| impl<T: Copy + Sub<T, Output = T>, U> SubAssign<TypedVector2D<T, U>> for TypedVector2D<T, U> { |
| #[inline] |
| fn sub_assign(&mut self, other: Self) { |
| *self = *self - other |
| } |
| } |
| |
| impl<T: Copy + Sub<T, Output = T>, U> Sub for TypedVector2D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn sub(self, other: Self) -> Self { |
| vec2(self.x - other.x, self.y - other.y) |
| } |
| } |
| |
| impl<T: Copy + Neg<Output = T>, U> Neg for TypedVector2D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn neg(self) -> Self { |
| vec2(-self.x, -self.y) |
| } |
| } |
| |
| impl<T: Float, U> TypedVector2D<T, U> { |
| #[inline] |
| pub fn min(self, other: Self) -> Self { |
| vec2(self.x.min(other.x), self.y.min(other.y)) |
| } |
| |
| #[inline] |
| pub fn max(self, other: Self) -> Self { |
| vec2(self.x.max(other.x), self.y.max(other.y)) |
| } |
| |
| #[inline] |
| pub fn clamp(&self, start: Self, end: Self) -> Self { |
| self.max(start).min(end) |
| } |
| } |
| |
| impl<T: Copy + Mul<T, Output = T>, U> Mul<T> for TypedVector2D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn mul(self, scale: T) -> Self { |
| vec2(self.x * scale, self.y * scale) |
| } |
| } |
| |
| impl<T: Copy + Div<T, Output = T>, U> Div<T> for TypedVector2D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn div(self, scale: T) -> Self { |
| vec2(self.x / scale, self.y / scale) |
| } |
| } |
| |
| impl<T: Copy + Mul<T, Output = T>, U> MulAssign<T> for TypedVector2D<T, U> { |
| #[inline] |
| fn mul_assign(&mut self, scale: T) { |
| *self = *self * scale |
| } |
| } |
| |
| impl<T: Copy + Div<T, Output = T>, U> DivAssign<T> for TypedVector2D<T, U> { |
| #[inline] |
| fn div_assign(&mut self, scale: T) { |
| *self = *self / scale |
| } |
| } |
| |
| impl<T: Copy + Mul<T, Output = T>, U1, U2> Mul<TypedScale<T, U1, U2>> for TypedVector2D<T, U1> { |
| type Output = TypedVector2D<T, U2>; |
| #[inline] |
| fn mul(self, scale: TypedScale<T, U1, U2>) -> Self::Output { |
| vec2(self.x * scale.get(), self.y * scale.get()) |
| } |
| } |
| |
| impl<T: Copy + Div<T, Output = T>, U1, U2> Div<TypedScale<T, U1, U2>> for TypedVector2D<T, U2> { |
| type Output = TypedVector2D<T, U1>; |
| #[inline] |
| fn div(self, scale: TypedScale<T, U1, U2>) -> Self::Output { |
| vec2(self.x / scale.get(), self.y / scale.get()) |
| } |
| } |
| |
| impl<T: Round, U> TypedVector2D<T, U> { |
| /// Rounds each component to the nearest integer value. |
| /// |
| /// This behavior is preserved for negative values (unlike the basic cast). |
| /// For example `{ -0.1, -0.8 }.round() == { 0.0, -1.0 }`. |
| #[inline] |
| #[cfg_attr(feature = "unstable", must_use)] |
| pub fn round(&self) -> Self { |
| vec2(self.x.round(), self.y.round()) |
| } |
| } |
| |
| impl<T: Ceil, U> TypedVector2D<T, U> { |
| /// Rounds each component to the smallest integer equal or greater than the original value. |
| /// |
| /// This behavior is preserved for negative values (unlike the basic cast). |
| /// For example `{ -0.1, -0.8 }.ceil() == { 0.0, 0.0 }`. |
| #[inline] |
| #[cfg_attr(feature = "unstable", must_use)] |
| pub fn ceil(&self) -> Self { |
| vec2(self.x.ceil(), self.y.ceil()) |
| } |
| } |
| |
| impl<T: Floor, U> TypedVector2D<T, U> { |
| /// Rounds each component to the biggest integer equal or lower than the original value. |
| /// |
| /// This behavior is preserved for negative values (unlike the basic cast). |
| /// For example `{ -0.1, -0.8 }.floor() == { -1.0, -1.0 }`. |
| #[inline] |
| #[cfg_attr(feature = "unstable", must_use)] |
| pub fn floor(&self) -> Self { |
| vec2(self.x.floor(), self.y.floor()) |
| } |
| } |
| |
| impl<T: NumCast + Copy, U> TypedVector2D<T, U> { |
| /// Cast from one numeric representation to another, preserving the units. |
| /// |
| /// When casting from floating vector to integer coordinates, the decimals are truncated |
| /// as one would expect from a simple cast, but this behavior does not always make sense |
| /// geometrically. Consider using `round()`, `ceil()` or `floor()` before casting. |
| #[inline] |
| pub fn cast<NewT: NumCast + Copy>(&self) -> TypedVector2D<NewT, U> { |
| self.try_cast().unwrap() |
| } |
| |
| /// Fallible cast from one numeric representation to another, preserving the units. |
| /// |
| /// When casting from floating vector to integer coordinates, the decimals are truncated |
| /// as one would expect from a simple cast, but this behavior does not always make sense |
| /// geometrically. Consider using `round()`, `ceil()` or `floor()` before casting. |
| #[inline] |
| pub fn try_cast<NewT: NumCast + Copy>(&self) -> Option<TypedVector2D<NewT, U>> { |
| match (NumCast::from(self.x), NumCast::from(self.y)) { |
| (Some(x), Some(y)) => Some(TypedVector2D::new(x, y)), |
| _ => None, |
| } |
| } |
| |
| // Convenience functions for common casts |
| |
| /// Cast into an `f32` vector. |
| #[inline] |
| pub fn to_f32(&self) -> TypedVector2D<f32, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `f64` vector. |
| #[inline] |
| pub fn to_f64(&self) -> TypedVector2D<f64, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `usize` vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_usize(&self) -> TypedVector2D<usize, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `u32` vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_u32(&self) -> TypedVector2D<u32, U> { |
| self.cast() |
| } |
| |
| /// Cast into an i32 vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_i32(&self) -> TypedVector2D<i32, U> { |
| self.cast() |
| } |
| |
| /// Cast into an i64 vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_i64(&self) -> TypedVector2D<i64, U> { |
| self.cast() |
| } |
| } |
| |
| impl<T: Copy + ApproxEq<T>, U> ApproxEq<TypedVector2D<T, U>> for TypedVector2D<T, U> { |
| #[inline] |
| fn approx_epsilon() -> Self { |
| vec2(T::approx_epsilon(), T::approx_epsilon()) |
| } |
| |
| #[inline] |
| fn approx_eq(&self, other: &Self) -> bool { |
| self.x.approx_eq(&other.x) && self.y.approx_eq(&other.y) |
| } |
| |
| #[inline] |
| fn approx_eq_eps(&self, other: &Self, eps: &Self) -> bool { |
| self.x.approx_eq_eps(&other.x, &eps.x) && self.y.approx_eq_eps(&other.y, &eps.y) |
| } |
| } |
| |
| impl<T: Copy, U> Into<[T; 2]> for TypedVector2D<T, U> { |
| fn into(self) -> [T; 2] { |
| self.to_array() |
| } |
| } |
| |
| impl<T: Copy, U> From<[T; 2]> for TypedVector2D<T, U> { |
| fn from(array: [T; 2]) -> Self { |
| vec2(array[0], array[1]) |
| } |
| } |
| |
| impl<T, U> TypedVector2D<T, U> |
| where |
| T: Signed, |
| { |
| pub fn abs(&self) -> Self { |
| vec2(self.x.abs(), self.y.abs()) |
| } |
| } |
| |
| /// A 3d Vector tagged with a unit. |
| #[derive(EuclidMatrix)] |
| #[repr(C)] |
| pub struct TypedVector3D<T, U> { |
| pub x: T, |
| pub y: T, |
| pub z: T, |
| #[doc(hidden)] |
| pub _unit: PhantomData<U>, |
| } |
| |
| mint_vec!(TypedVector3D[x, y, z] = Vector3); |
| |
| /// Default 3d vector type with no unit. |
| /// |
| /// `Vector3D` provides the same methods as `TypedVector3D`. |
| pub type Vector3D<T> = TypedVector3D<T, UnknownUnit>; |
| |
| impl<T: Copy + Zero, U> TypedVector3D<T, U> { |
| /// Constructor, setting all components to zero. |
| #[inline] |
| pub fn zero() -> Self { |
| vec3(Zero::zero(), Zero::zero(), Zero::zero()) |
| } |
| |
| #[inline] |
| pub fn to_array_4d(&self) -> [T; 4] { |
| [self.x, self.y, self.z, Zero::zero()] |
| } |
| } |
| |
| impl<T: fmt::Debug, U> fmt::Debug for TypedVector3D<T, U> { |
| fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { |
| write!(f, "({:?},{:?},{:?})", self.x, self.y, self.z) |
| } |
| } |
| |
| impl<T: fmt::Display, U> fmt::Display for TypedVector3D<T, U> { |
| fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { |
| write!(f, "({},{},{})", self.x, self.y, self.z) |
| } |
| } |
| |
| impl<T, U> TypedVector3D<T, U> { |
| /// Constructor taking scalar values directly. |
| #[inline] |
| pub fn new(x: T, y: T, z: T) -> Self { |
| TypedVector3D { |
| x, |
| y, |
| z, |
| _unit: PhantomData, |
| } |
| } |
| } |
| |
| impl<T: Copy, U> TypedVector3D<T, U> { |
| /// Constructor taking properly typed Lengths instead of scalar values. |
| #[inline] |
| pub fn from_lengths(x: Length<T, U>, y: Length<T, U>, z: Length<T, U>) -> TypedVector3D<T, U> { |
| vec3(x.0, y.0, z.0) |
| } |
| |
| /// Cast this vector into a point. |
| /// |
| /// Equivalent to adding this vector to the origin. |
| #[inline] |
| pub fn to_point(&self) -> TypedPoint3D<T, U> { |
| point3(self.x, self.y, self.z) |
| } |
| |
| /// Returns a 2d vector using this vector's x and y coordinates |
| #[inline] |
| pub fn xy(&self) -> TypedVector2D<T, U> { |
| vec2(self.x, self.y) |
| } |
| |
| /// Returns a 2d vector using this vector's x and z coordinates |
| #[inline] |
| pub fn xz(&self) -> TypedVector2D<T, U> { |
| vec2(self.x, self.z) |
| } |
| |
| /// Returns a 2d vector using this vector's x and z coordinates |
| #[inline] |
| pub fn yz(&self) -> TypedVector2D<T, U> { |
| vec2(self.y, self.z) |
| } |
| |
| /// Returns self.x as a Length carrying the unit. |
| #[inline] |
| pub fn x_typed(&self) -> Length<T, U> { |
| Length::new(self.x) |
| } |
| |
| /// Returns self.y as a Length carrying the unit. |
| #[inline] |
| pub fn y_typed(&self) -> Length<T, U> { |
| Length::new(self.y) |
| } |
| |
| /// Returns self.z as a Length carrying the unit. |
| #[inline] |
| pub fn z_typed(&self) -> Length<T, U> { |
| Length::new(self.z) |
| } |
| |
| #[inline] |
| pub fn to_array(&self) -> [T; 3] { |
| [self.x, self.y, self.z] |
| } |
| |
| /// Drop the units, preserving only the numeric value. |
| #[inline] |
| pub fn to_untyped(&self) -> Vector3D<T> { |
| vec3(self.x, self.y, self.z) |
| } |
| |
| /// Tag a unitless value with units. |
| #[inline] |
| pub fn from_untyped(p: &Vector3D<T>) -> Self { |
| vec3(p.x, p.y, p.z) |
| } |
| |
| /// Convert into a 2d vector. |
| #[inline] |
| pub fn to_2d(&self) -> TypedVector2D<T, U> { |
| self.xy() |
| } |
| } |
| |
| impl<T: Mul<T, Output = T> + Add<T, Output = T> + Sub<T, Output = T> + Copy, U> |
| TypedVector3D<T, U> { |
| // Dot product. |
| #[inline] |
| pub fn dot(self, other: Self) -> T { |
| self.x * other.x + self.y * other.y + self.z * other.z |
| } |
| |
| // Cross product. |
| #[inline] |
| pub fn cross(self, other: Self) -> Self { |
| vec3( |
| self.y * other.z - self.z * other.y, |
| self.z * other.x - self.x * other.z, |
| self.x * other.y - self.y * other.x, |
| ) |
| } |
| |
| #[inline] |
| pub fn normalize(self) -> Self |
| where |
| T: Float, |
| { |
| self / self.length() |
| } |
| |
| /// Return the normalized vector even if the length is larger than the max value of Float. |
| #[inline] |
| pub fn robust_normalize(self) -> Self |
| where |
| T: Float, |
| { |
| let length = self.length(); |
| if length.is_infinite() { |
| let scaled = self / T::max_value(); |
| scaled / scaled.length() |
| } else { |
| self / length |
| } |
| } |
| |
| #[inline] |
| pub fn square_length(&self) -> T { |
| self.x * self.x + self.y * self.y + self.z * self.z |
| } |
| |
| #[inline] |
| pub fn length(&self) -> T |
| where |
| T: Float, |
| { |
| self.square_length().sqrt() |
| } |
| } |
| |
| impl<T, U> TypedVector3D<T, U> |
| where |
| T: Copy + One + Add<Output = T> + Sub<Output = T> + Mul<Output = T>, |
| { |
| /// Linearly interpolate between this vector and another vector. |
| /// |
| /// `t` is expected to be between zero and one. |
| #[inline] |
| pub fn lerp(&self, other: Self, t: T) -> Self { |
| let one_t = T::one() - t; |
| (*self) * one_t + other * t |
| } |
| } |
| |
| impl<T: Copy + Add<T, Output = T>, U> Add for TypedVector3D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn add(self, other: Self) -> Self { |
| vec3(self.x + other.x, self.y + other.y, self.z + other.z) |
| } |
| } |
| |
| impl<T: Copy + Sub<T, Output = T>, U> Sub for TypedVector3D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn sub(self, other: Self) -> Self { |
| vec3(self.x - other.x, self.y - other.y, self.z - other.z) |
| } |
| } |
| |
| impl<T: Copy + Add<T, Output = T>, U> AddAssign for TypedVector3D<T, U> { |
| #[inline] |
| fn add_assign(&mut self, other: Self) { |
| *self = *self + other |
| } |
| } |
| |
| impl<T: Copy + Sub<T, Output = T>, U> SubAssign<TypedVector3D<T, U>> for TypedVector3D<T, U> { |
| #[inline] |
| fn sub_assign(&mut self, other: Self) { |
| *self = *self - other |
| } |
| } |
| |
| impl<T: Copy + Neg<Output = T>, U> Neg for TypedVector3D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn neg(self) -> Self { |
| vec3(-self.x, -self.y, -self.z) |
| } |
| } |
| |
| impl<T: Copy + Mul<T, Output = T>, U> Mul<T> for TypedVector3D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn mul(self, scale: T) -> Self { |
| Self::new(self.x * scale, self.y * scale, self.z * scale) |
| } |
| } |
| |
| impl<T: Copy + Div<T, Output = T>, U> Div<T> for TypedVector3D<T, U> { |
| type Output = Self; |
| #[inline] |
| fn div(self, scale: T) -> Self { |
| Self::new(self.x / scale, self.y / scale, self.z / scale) |
| } |
| } |
| |
| impl<T: Copy + Mul<T, Output = T>, U> MulAssign<T> for TypedVector3D<T, U> { |
| #[inline] |
| fn mul_assign(&mut self, scale: T) { |
| *self = *self * scale |
| } |
| } |
| |
| impl<T: Copy + Div<T, Output = T>, U> DivAssign<T> for TypedVector3D<T, U> { |
| #[inline] |
| fn div_assign(&mut self, scale: T) { |
| *self = *self / scale |
| } |
| } |
| |
| impl<T: Float, U> TypedVector3D<T, U> { |
| #[inline] |
| pub fn min(self, other: Self) -> Self { |
| vec3( |
| self.x.min(other.x), |
| self.y.min(other.y), |
| self.z.min(other.z), |
| ) |
| } |
| |
| #[inline] |
| pub fn max(self, other: Self) -> Self { |
| vec3( |
| self.x.max(other.x), |
| self.y.max(other.y), |
| self.z.max(other.z), |
| ) |
| } |
| |
| #[inline] |
| pub fn clamp(&self, start: Self, end: Self) -> Self { |
| self.max(start).min(end) |
| } |
| } |
| |
| impl<T: Copy + Mul<T, Output = T>, U1, U2> Mul<TypedScale<T, U1, U2>> for TypedVector3D<T, U1> { |
| type Output = TypedVector3D<T, U2>; |
| #[inline] |
| fn mul(self, scale: TypedScale<T, U1, U2>) -> Self::Output { |
| vec3(self.x * scale.get(), self.y * scale.get(), self.z * scale.get()) |
| } |
| } |
| |
| impl<T: Copy + Div<T, Output = T>, U1, U2> Div<TypedScale<T, U1, U2>> for TypedVector3D<T, U2> { |
| type Output = TypedVector3D<T, U1>; |
| #[inline] |
| fn div(self, scale: TypedScale<T, U1, U2>) -> Self::Output { |
| vec3(self.x / scale.get(), self.y / scale.get(), self.z / scale.get()) |
| } |
| } |
| |
| impl<T: Round, U> TypedVector3D<T, U> { |
| /// Rounds each component to the nearest integer value. |
| /// |
| /// This behavior is preserved for negative values (unlike the basic cast). |
| #[inline] |
| #[cfg_attr(feature = "unstable", must_use)] |
| pub fn round(&self) -> Self { |
| vec3(self.x.round(), self.y.round(), self.z.round()) |
| } |
| } |
| |
| impl<T: Ceil, U> TypedVector3D<T, U> { |
| /// Rounds each component to the smallest integer equal or greater than the original value. |
| /// |
| /// This behavior is preserved for negative values (unlike the basic cast). |
| #[inline] |
| #[cfg_attr(feature = "unstable", must_use)] |
| pub fn ceil(&self) -> Self { |
| vec3(self.x.ceil(), self.y.ceil(), self.z.ceil()) |
| } |
| } |
| |
| impl<T: Floor, U> TypedVector3D<T, U> { |
| /// Rounds each component to the biggest integer equal or lower than the original value. |
| /// |
| /// This behavior is preserved for negative values (unlike the basic cast). |
| #[inline] |
| #[cfg_attr(feature = "unstable", must_use)] |
| pub fn floor(&self) -> Self { |
| vec3(self.x.floor(), self.y.floor(), self.z.floor()) |
| } |
| } |
| |
| impl<T: NumCast + Copy, U> TypedVector3D<T, U> { |
| /// Cast from one numeric representation to another, preserving the units. |
| /// |
| /// When casting from floating vector to integer coordinates, the decimals are truncated |
| /// as one would expect from a simple cast, but this behavior does not always make sense |
| /// geometrically. Consider using `round()`, `ceil()` or `floor()` before casting. |
| #[inline] |
| pub fn cast<NewT: NumCast + Copy>(&self) -> TypedVector3D<NewT, U> { |
| self.try_cast().unwrap() |
| } |
| |
| /// Fallible cast from one numeric representation to another, preserving the units. |
| /// |
| /// When casting from floating vector to integer coordinates, the decimals are truncated |
| /// as one would expect from a simple cast, but this behavior does not always make sense |
| /// geometrically. Consider using `round()`, `ceil()` or `floor()` before casting. |
| #[inline] |
| pub fn try_cast<NewT: NumCast + Copy>(&self) -> Option<TypedVector3D<NewT, U>> { |
| match ( |
| NumCast::from(self.x), |
| NumCast::from(self.y), |
| NumCast::from(self.z), |
| ) { |
| (Some(x), Some(y), Some(z)) => Some(vec3(x, y, z)), |
| _ => None, |
| } |
| } |
| |
| // Convenience functions for common casts |
| |
| /// Cast into an `f32` vector. |
| #[inline] |
| pub fn to_f32(&self) -> TypedVector3D<f32, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `f64` vector. |
| #[inline] |
| pub fn to_f64(&self) -> TypedVector3D<f64, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `usize` vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_usize(&self) -> TypedVector3D<usize, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `u32` vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_u32(&self) -> TypedVector3D<u32, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `i32` vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_i32(&self) -> TypedVector3D<i32, U> { |
| self.cast() |
| } |
| |
| /// Cast into an `i64` vector, truncating decimals if any. |
| /// |
| /// When casting from floating vector vectors, it is worth considering whether |
| /// to `round()`, `ceil()` or `floor()` before the cast in order to obtain |
| /// the desired conversion behavior. |
| #[inline] |
| pub fn to_i64(&self) -> TypedVector3D<i64, U> { |
| self.cast() |
| } |
| } |
| |
| impl<T: Copy + ApproxEq<T>, U> ApproxEq<TypedVector3D<T, U>> for TypedVector3D<T, U> { |
| #[inline] |
| fn approx_epsilon() -> Self { |
| vec3( |
| T::approx_epsilon(), |
| T::approx_epsilon(), |
| T::approx_epsilon(), |
| ) |
| } |
| |
| #[inline] |
| fn approx_eq(&self, other: &Self) -> bool { |
| self.x.approx_eq(&other.x) && self.y.approx_eq(&other.y) && self.z.approx_eq(&other.z) |
| } |
| |
| #[inline] |
| fn approx_eq_eps(&self, other: &Self, eps: &Self) -> bool { |
| self.x.approx_eq_eps(&other.x, &eps.x) && self.y.approx_eq_eps(&other.y, &eps.y) |
| && self.z.approx_eq_eps(&other.z, &eps.z) |
| } |
| } |
| |
| impl<T: Copy, U> Into<[T; 3]> for TypedVector3D<T, U> { |
| fn into(self) -> [T; 3] { |
| self.to_array() |
| } |
| } |
| |
| impl<T: Copy, U> From<[T; 3]> for TypedVector3D<T, U> { |
| fn from(array: [T; 3]) -> Self { |
| vec3(array[0], array[1], array[2]) |
| } |
| } |
| |
| impl<T, U> TypedVector3D<T, U> |
| where |
| T: Signed, |
| { |
| pub fn abs(&self) -> Self { |
| vec3(self.x.abs(), self.y.abs(), self.z.abs()) |
| } |
| } |
| |
| #[derive(Copy, Clone, Debug, PartialEq, Eq, Hash)] |
| pub struct BoolVector2D { |
| pub x: bool, |
| pub y: bool, |
| } |
| |
| #[derive(Copy, Clone, Debug, PartialEq, Eq, Hash)] |
| pub struct BoolVector3D { |
| pub x: bool, |
| pub y: bool, |
| pub z: bool, |
| } |
| |
| impl BoolVector2D { |
| #[inline] |
| pub fn all(&self) -> bool { |
| self.x && self.y |
| } |
| |
| #[inline] |
| pub fn any(&self) -> bool { |
| self.x || self.y |
| } |
| |
| #[inline] |
| pub fn none(&self) -> bool { |
| !self.any() |
| } |
| |
| #[inline] |
| pub fn and(&self, other: Self) -> Self { |
| BoolVector2D { |
| x: self.x && other.x, |
| y: self.y && other.y, |
| } |
| } |
| |
| #[inline] |
| pub fn or(&self, other: Self) -> Self { |
| BoolVector2D { |
| x: self.x || other.x, |
| y: self.y || other.y, |
| } |
| } |
| |
| #[inline] |
| pub fn not(&self) -> Self { |
| BoolVector2D { |
| x: !self.x, |
| y: !self.y, |
| } |
| } |
| |
| #[inline] |
| pub fn select_point<T: Copy, U>(&self, a: &TypedPoint2D<T, U>, b: &TypedPoint2D<T, U>) -> TypedPoint2D<T, U> { |
| point2( |
| if self.x { a.x } else { b.x }, |
| if self.y { a.y } else { b.y }, |
| ) |
| } |
| |
| #[inline] |
| pub fn select_vector<T: Copy, U>(&self, a: &TypedVector2D<T, U>, b: &TypedVector2D<T, U>) -> TypedVector2D<T, U> { |
| vec2( |
| if self.x { a.x } else { b.x }, |
| if self.y { a.y } else { b.y }, |
| ) |
| } |
| |
| #[inline] |
| pub fn select_size<T: Copy, U>(&self, a: &TypedSize2D<T, U>, b: &TypedSize2D<T, U>) -> TypedSize2D<T, U> { |
| size2( |
| if self.x { a.width } else { b.width }, |
| if self.y { a.height } else { b.height }, |
| ) |
| } |
| } |
| |
| impl BoolVector3D { |
| #[inline] |
| pub fn all(&self) -> bool { |
| self.x && self.y && self.z |
| } |
| |
| #[inline] |
| pub fn any(&self) -> bool { |
| self.x || self.y || self.z |
| } |
| |
| #[inline] |
| pub fn none(&self) -> bool { |
| !self.any() |
| } |
| |
| #[inline] |
| pub fn and(&self, other: Self) -> Self { |
| BoolVector3D { |
| x: self.x && other.x, |
| y: self.y && other.y, |
| z: self.z && other.z, |
| } |
| } |
| |
| #[inline] |
| pub fn or(&self, other: Self) -> Self { |
| BoolVector3D { |
| x: self.x || other.x, |
| y: self.y || other.y, |
| z: self.z || other.z, |
| } |
| } |
| |
| #[inline] |
| pub fn not(&self) -> Self { |
| BoolVector3D { |
| x: !self.x, |
| y: !self.y, |
| z: !self.z, |
| } |
| } |
| |
| |
| #[inline] |
| pub fn select_point<T: Copy, U>(&self, a: &TypedPoint3D<T, U>, b: &TypedPoint3D<T, U>) -> TypedPoint3D<T, U> { |
| point3( |
| if self.x { a.x } else { b.x }, |
| if self.y { a.y } else { b.y }, |
| if self.z { a.z } else { b.z }, |
| ) |
| } |
| |
| #[inline] |
| pub fn select_vector<T: Copy, U>(&self, a: &TypedVector3D<T, U>, b: &TypedVector3D<T, U>) -> TypedVector3D<T, U> { |
| vec3( |
| if self.x { a.x } else { b.x }, |
| if self.y { a.y } else { b.y }, |
| if self.z { a.z } else { b.z }, |
| ) |
| } |
| |
| #[inline] |
| pub fn xy(&self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.x, |
| y: self.y, |
| } |
| } |
| |
| #[inline] |
| pub fn xz(&self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.x, |
| y: self.z, |
| } |
| } |
| |
| #[inline] |
| pub fn yz(&self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.y, |
| y: self.z, |
| } |
| } |
| } |
| |
| impl<T: PartialOrd, U> TypedVector2D<T, U> { |
| pub fn greater_than(&self, other: &Self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.x > other.x, |
| y: self.y > other.y, |
| } |
| } |
| |
| pub fn lower_than(&self, other: &Self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.x < other.x, |
| y: self.y < other.y, |
| } |
| } |
| } |
| |
| |
| impl<T: PartialEq, U> TypedVector2D<T, U> { |
| pub fn equal(&self, other: &Self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.x == other.x, |
| y: self.y == other.y, |
| } |
| } |
| |
| pub fn not_equal(&self, other: &Self) -> BoolVector2D { |
| BoolVector2D { |
| x: self.x != other.x, |
| y: self.y != other.y, |
| } |
| } |
| } |
| |
| impl<T: PartialOrd, U> TypedVector3D<T, U> { |
| pub fn greater_than(&self, other: &Self) -> BoolVector3D { |
| BoolVector3D { |
| x: self.x > other.x, |
| y: self.y > other.y, |
| z: self.z > other.z, |
| } |
| } |
| |
| pub fn lower_than(&self, other: &Self) -> BoolVector3D { |
| BoolVector3D { |
| x: self.x < other.x, |
| y: self.y < other.y, |
| z: self.z < other.z, |
| } |
| } |
| } |
| |
| |
| impl<T: PartialEq, U> TypedVector3D<T, U> { |
| pub fn equal(&self, other: &Self) -> BoolVector3D { |
| BoolVector3D { |
| x: self.x == other.x, |
| y: self.y == other.y, |
| z: self.z == other.z, |
| } |
| } |
| |
| pub fn not_equal(&self, other: &Self) -> BoolVector3D { |
| BoolVector3D { |
| x: self.x != other.x, |
| y: self.y != other.y, |
| z: self.z != other.z, |
| } |
| } |
| } |
| |
| /// Convenience constructor. |
| #[inline] |
| pub fn vec2<T, U>(x: T, y: T) -> TypedVector2D<T, U> { |
| TypedVector2D::new(x, y) |
| } |
| |
| /// Convenience constructor. |
| #[inline] |
| pub fn vec3<T, U>(x: T, y: T, z: T) -> TypedVector3D<T, U> { |
| TypedVector3D::new(x, y, z) |
| } |
| |
| #[inline] |
| pub fn bvec2(x: bool, y: bool) -> BoolVector2D { |
| BoolVector2D { x, y } |
| } |
| |
| #[inline] |
| pub fn bvec3(x: bool, y: bool, z: bool) -> BoolVector3D { |
| BoolVector3D { x, y, z } |
| } |
| |
| |
| #[cfg(test)] |
| mod vector2d { |
| use super::{Vector2D, vec2}; |
| #[cfg(feature = "mint")] |
| use mint; |
| type Vec2 = Vector2D<f32>; |
| |
| #[test] |
| pub fn test_scalar_mul() { |
| let p1: Vec2 = vec2(3.0, 5.0); |
| |
| let result = p1 * 5.0; |
| |
| assert_eq!(result, Vector2D::new(15.0, 25.0)); |
| } |
| |
| #[test] |
| pub fn test_dot() { |
| let p1: Vec2 = vec2(2.0, 7.0); |
| let p2: Vec2 = vec2(13.0, 11.0); |
| assert_eq!(p1.dot(p2), 103.0); |
| } |
| |
| #[test] |
| pub fn test_cross() { |
| let p1: Vec2 = vec2(4.0, 7.0); |
| let p2: Vec2 = vec2(13.0, 8.0); |
| let r = p1.cross(p2); |
| assert_eq!(r, -59.0); |
| } |
| |
| #[test] |
| pub fn test_normalize() { |
| let p0: Vec2 = Vec2::zero(); |
| let p1: Vec2 = vec2(4.0, 0.0); |
| let p2: Vec2 = vec2(3.0, -4.0); |
| assert!(p0.normalize().x.is_nan() && p0.normalize().y.is_nan()); |
| assert_eq!(p1.normalize(), vec2(1.0, 0.0)); |
| assert_eq!(p2.normalize(), vec2(0.6, -0.8)); |
| |
| let p3: Vec2 = vec2(::std::f32::MAX, ::std::f32::MAX); |
| assert_ne!(p3.normalize(), vec2(1.0 / 2.0f32.sqrt(), 1.0 / 2.0f32.sqrt())); |
| assert_eq!(p3.robust_normalize(), vec2(1.0 / 2.0f32.sqrt(), 1.0 / 2.0f32.sqrt())); |
| } |
| |
| #[test] |
| pub fn test_min() { |
| let p1: Vec2 = vec2(1.0, 3.0); |
| let p2: Vec2 = vec2(2.0, 2.0); |
| |
| let result = p1.min(p2); |
| |
| assert_eq!(result, vec2(1.0, 2.0)); |
| } |
| |
| #[test] |
| pub fn test_max() { |
| let p1: Vec2 = vec2(1.0, 3.0); |
| let p2: Vec2 = vec2(2.0, 2.0); |
| |
| let result = p1.max(p2); |
| |
| assert_eq!(result, vec2(2.0, 3.0)); |
| } |
| #[test] |
| pub fn test_angle_from_x_axis() { |
| use core::f32::consts::FRAC_PI_2; |
| use approxeq::ApproxEq; |
| |
| let right: Vec2 = vec2(10.0, 0.0); |
| let down: Vec2 = vec2(0.0, 4.0); |
| let up: Vec2 = vec2(0.0, -1.0); |
| |
| assert!(right.angle_from_x_axis().get().approx_eq(&0.0)); |
| assert!(down.angle_from_x_axis().get().approx_eq(&FRAC_PI_2)); |
| assert!(up.angle_from_x_axis().get().approx_eq(&-FRAC_PI_2)); |
| } |
| |
| #[cfg(feature = "mint")] |
| #[test] |
| pub fn test_mint() { |
| let v1 = Vec2::new(1.0, 3.0); |
| let vm: mint::Vector2<_> = v1.into(); |
| let v2 = Vec2::from(vm); |
| |
| assert_eq!(v1, v2); |
| } |
| } |
| |
| #[cfg(test)] |
| mod typedvector2d { |
| use super::{TypedVector2D, Vector2D, vec2}; |
| use scale::TypedScale; |
| |
| pub enum Mm {} |
| pub enum Cm {} |
| |
| pub type Vector2DMm<T> = TypedVector2D<T, Mm>; |
| pub type Vector2DCm<T> = TypedVector2D<T, Cm>; |
| |
| #[test] |
| pub fn test_add() { |
| let p1 = Vector2DMm::new(1.0, 2.0); |
| let p2 = Vector2DMm::new(3.0, 4.0); |
| |
| let result = p1 + p2; |
| |
| assert_eq!(result, vec2(4.0, 6.0)); |
| } |
| |
| #[test] |
| pub fn test_add_assign() { |
| let mut p1 = Vector2DMm::new(1.0, 2.0); |
| p1 += vec2(3.0, 4.0); |
| |
| assert_eq!(p1, vec2(4.0, 6.0)); |
| } |
| |
| #[test] |
| pub fn test_scalar_mul() { |
| let p1 = Vector2DMm::new(1.0, 2.0); |
| let cm_per_mm = TypedScale::<f32, Mm, Cm>::new(0.1); |
| |
| let result: Vector2DCm<f32> = p1 * cm_per_mm; |
| |
| assert_eq!(result, vec2(0.1, 0.2)); |
| } |
| |
| #[test] |
| pub fn test_swizzling() { |
| let p: Vector2D<i32> = vec2(1, 2); |
| assert_eq!(p.yx(), vec2(2, 1)); |
| } |
| } |
| |
| #[cfg(test)] |
| mod vector3d { |
| #[cfg(feature = "mint")] |
| use mint; |
| use super::{TypedVector3D, Vector3D, vec2, vec3}; |
| use scale::TypedScale; |
| |
| type Vec3 = Vector3D<f32>; |
| |
| #[test] |
| pub fn test_dot() { |
| let p1: Vec3 = vec3(7.0, 21.0, 32.0); |
| let p2: Vec3 = vec3(43.0, 5.0, 16.0); |
| assert_eq!(p1.dot(p2), 918.0); |
| } |
| |
| #[test] |
| pub fn test_cross() { |
| let p1: Vec3 = vec3(4.0, 7.0, 9.0); |
| let p2: Vec3 = vec3(13.0, 8.0, 3.0); |
| let p3 = p1.cross(p2); |
| assert_eq!(p3, vec3(-51.0, 105.0, -59.0)); |
| } |
| |
| #[test] |
| pub fn test_normalize() { |
| let p0: Vec3 = Vec3::zero(); |
| let p1: Vec3 = vec3(0.0, -6.0, 0.0); |
| let p2: Vec3 = vec3(1.0, 2.0, -2.0); |
| assert!( |
| p0.normalize().x.is_nan() && p0.normalize().y.is_nan() && p0.normalize().z.is_nan() |
| ); |
| assert_eq!(p1.normalize(), vec3(0.0, -1.0, 0.0)); |
| assert_eq!(p2.normalize(), vec3(1.0 / 3.0, 2.0 / 3.0, -2.0 / 3.0)); |
| |
| let p3: Vec3 = vec3(::std::f32::MAX, ::std::f32::MAX, 0.0); |
| assert_ne!(p3.normalize(), vec3(1.0 / 2.0f32.sqrt(), 1.0 / 2.0f32.sqrt(), 0.0)); |
| assert_eq!(p3.robust_normalize(), vec3(1.0 / 2.0f32.sqrt(), 1.0 / 2.0f32.sqrt(), 0.0)); |
| } |
| |
| #[test] |
| pub fn test_min() { |
| let p1: Vec3 = vec3(1.0, 3.0, 5.0); |
| let p2: Vec3 = vec3(2.0, 2.0, -1.0); |
| |
| let result = p1.min(p2); |
| |
| assert_eq!(result, vec3(1.0, 2.0, -1.0)); |
| } |
| |
| #[test] |
| pub fn test_max() { |
| let p1: Vec3 = vec3(1.0, 3.0, 5.0); |
| let p2: Vec3 = vec3(2.0, 2.0, -1.0); |
| |
| let result = p1.max(p2); |
| |
| assert_eq!(result, vec3(2.0, 3.0, 5.0)); |
| } |
| |
| #[test] |
| pub fn test_clamp() { |
| let p1: Vec3 = vec3(1.0, -1.0, 5.0); |
| let p2: Vec3 = vec3(2.0, 5.0, 10.0); |
| let p3: Vec3 = vec3(-1.0, 2.0, 20.0); |
| |
| let result = p3.clamp(p1, p2); |
| |
| assert_eq!(result, vec3(1.0, 2.0, 10.0)); |
| } |
| |
| #[test] |
| pub fn test_scalar_mul() { |
| enum Mm {} |
| enum Cm {} |
| |
| let p1 = TypedVector3D::<f32, Mm>::new(1.0, 2.0, 3.0); |
| let cm_per_mm = TypedScale::<f32, Mm, Cm>::new(0.1); |
| |
| let result: TypedVector3D<f32, Cm> = p1 * cm_per_mm; |
| |
| assert_eq!(result, vec3(0.1, 0.2, 0.3)); |
| } |
| |
| #[test] |
| pub fn test_swizzling() { |
| let p: Vector3D<i32> = vec3(1, 2, 3); |
| assert_eq!(p.xy(), vec2(1, 2)); |
| assert_eq!(p.xz(), vec2(1, 3)); |
| assert_eq!(p.yz(), vec2(2, 3)); |
| } |
| |
| #[cfg(feature = "mint")] |
| #[test] |
| pub fn test_mint() { |
| let v1 = Vec3::new(1.0, 3.0, 5.0); |
| let vm: mint::Vector3<_> = v1.into(); |
| let v2 = Vec3::from(vm); |
| |
| assert_eq!(v1, v2); |
| } |
| } |
| |
| #[cfg(test)] |
| mod bool_vector { |
| use super::*; |
| type Vec2 = Vector2D<f32>; |
| type Vec3 = Vector3D<f32>; |
| |
| #[test] |
| fn test_bvec2() { |
| |
| assert_eq!( |
| Vec2::new(1.0, 2.0).greater_than(&Vec2::new(2.0, 1.0)), |
| bvec2(false, true), |
| ); |
| |
| assert_eq!( |
| Vec2::new(1.0, 2.0).lower_than(&Vec2::new(2.0, 1.0)), |
| bvec2(true, false), |
| ); |
| |
| assert_eq!( |
| Vec2::new(1.0, 2.0).equal(&Vec2::new(1.0, 3.0)), |
| bvec2(true, false), |
| ); |
| |
| assert_eq!( |
| Vec2::new(1.0, 2.0).not_equal(&Vec2::new(1.0, 3.0)), |
| bvec2(false, true), |
| ); |
| |
| assert!(bvec2(true, true).any()); |
| assert!(bvec2(false, true).any()); |
| assert!(bvec2(true, false).any()); |
| assert!(!bvec2(false, false).any()); |
| assert!(bvec2(false, false).none()); |
| assert!(bvec2(true, true).all()); |
| assert!(!bvec2(false, true).all()); |
| assert!(!bvec2(true, false).all()); |
| assert!(!bvec2(false, false).all()); |
| |
| assert_eq!(bvec2(true, false).not(), bvec2(false, true)); |
| assert_eq!(bvec2(true, false).and(bvec2(true, true)), bvec2(true, false)); |
| assert_eq!(bvec2(true, false).or(bvec2(true, true)), bvec2(true, true)); |
| |
| assert_eq!( |
| bvec2(true, false).select_vector(&Vec2::new(1.0, 2.0), &Vec2::new(3.0, 4.0)), |
| Vec2::new(1.0, 4.0), |
| ); |
| } |
| |
| #[test] |
| fn test_bvec3() { |
| |
| assert_eq!( |
| Vec3::new(1.0, 2.0, 3.0).greater_than(&Vec3::new(3.0, 2.0, 1.0)), |
| bvec3(false, false, true), |
| ); |
| |
| assert_eq!( |
| Vec3::new(1.0, 2.0, 3.0).lower_than(&Vec3::new(3.0, 2.0, 1.0)), |
| bvec3(true, false, false), |
| ); |
| |
| assert_eq!( |
| Vec3::new(1.0, 2.0, 3.0).equal(&Vec3::new(3.0, 2.0, 1.0)), |
| bvec3(false, true, false), |
| ); |
| |
| assert_eq!( |
| Vec3::new(1.0, 2.0, 3.0).not_equal(&Vec3::new(3.0, 2.0, 1.0)), |
| bvec3(true, false, true), |
| ); |
| |
| assert!(bvec3(true, true, false).any()); |
| assert!(bvec3(false, true, false).any()); |
| assert!(bvec3(true, false, false).any()); |
| assert!(!bvec3(false, false, false).any()); |
| assert!(bvec3(false, false, false).none()); |
| assert!(bvec3(true, true, true).all()); |
| assert!(!bvec3(false, true, false).all()); |
| assert!(!bvec3(true, false, false).all()); |
| assert!(!bvec3(false, false, false).all()); |
| |
| assert_eq!(bvec3(true, false, true).not(), bvec3(false, true, false)); |
| assert_eq!(bvec3(true, false, true).and(bvec3(true, true, false)), bvec3(true, false, false)); |
| assert_eq!(bvec3(true, false, false).or(bvec3(true, true, false)), bvec3(true, true, false)); |
| |
| assert_eq!( |
| bvec3(true, false, true).select_vector(&Vec3::new(1.0, 2.0, 3.0), &Vec3::new(4.0, 5.0, 6.0)), |
| Vec3::new(1.0, 5.0, 3.0), |
| ); |
| } |
| |
| } |