build/config/zircon/BUILD.gn

# Copyright 2019 The Fuchsia Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

import("//build/board.gni")
import("//build/config/build_id.gni")
import("//build/config/clang/clang.gni")
import("//build/config/clang/crash_diagnostics.gni")
import("//build/config/compiler.gni")
import("//build/config/linker.gni")
import("//build/config/zircon/levels.gni")
import("//build/toolchain/variant.gni")

# NOTE: This file provides the GN configs used by Zircon toolchains
# exclusively. See //build/toolchain/zircon/zircon_toolchain.gni.
#
# Major differences in the rewrite:
#
#  - Uses |zircon_toolchain| global variable, instead of |toolchain|.
#
#  - All code paths related to |is_host| has been removed (the Zircon toolchain
#    are never used to build host binaries).

# These flags are enabled by default in Fuchsia's Clang toolchain, but we set
# them explicitly to support other Clang toolchains and Clang-based tools.
config("clang_defaults") {
  if (clang_embed_bitcode) {
    cflags = [
      "-Xclang",
      "-fembed-bitcode=all",
    ]
  }
  if (current_cpu == "x64") {
    asmflags = [ "-Wa,--mrelax-relocations=yes" ]
  }
  if (current_os == "linux") {
    cflags_cc = [ "-stdlib=libc++" ]
    ldflags = [
      "-stdlib=libc++",

      # TODO(fxbug.dev/75410): Re-enable after fxbug.dev/101610.
      #"-unwindlib=libunwind",
      "-rtlib=compiler-rt",
    ]
  }
}

config("compiler") {
  # Per CPU targeting policy we always target the baseline when building the
  # kernel, rather than using board_configs. This is done to reduce binary
  # diversity. See: TODO RFC LINK HERE
  configs = [ "//build/config:cpu_baseline" ]

  compiler_flags = []
  cflags_cc = []
  defines = []
  ldflags = []

  # NOTE: This config should only be used with Zircon-specific toolchains
  # but this BUILD.gn file is also included from non-Zircon ones. To
  # avoid un-necessary GN errors, define a fake local zircon_toolchain
  # scope to ensure this config() definitions executes properly even if
  # it is never used.
  if (zircon_toolchain == false) {
    zircon_toolchain = {
      target_tuple = ""
      version_string = ""
      include_dirs_cc = []
      lib_dirs = []
    }
  }

  # For GCC, the compiler command implies the target.
  # For Clang, there's a single compiler command that takes `--target`.
  if (!is_gcc) {
    compiler_flags += [ "--target=${zircon_toolchain.target_tuple}" ]
  }

  if (linker != "") {
    ldflags += [ "-fuse-ld=$linker" ]
  }

  if (defined(zircon_toolchain.version_string) &&
      zircon_toolchain.version_string != "") {
    # Nothing uses this define, but its presence on compilation command
    # lines ensures that Ninja will rebuild things when a new compiler
    # version arrives.
    defines += [ "TOOLCHAIN_VERSION=${zircon_toolchain.version_string}" ]
  }

  # This is the default already on Fuchsia and maybe others, but never hurts.
  cflags = [ "-fno-common" ]

  configs += [
    "//build/config:color_diagnostics",
    # TODO: "$current_os:compiler",
  ]
  if (!is_gcc) {
    configs += [ ":clang_defaults" ]
  }

  if (is_fuchsia) {
    # TODO(mcgrathr): These should all be default in the compiler driver.
    ldflags += [
      "-Wl,-z,combreloc",
      "-Wl,-z,text",
    ]

    # ld.bfd doesn't support -z relro for the targets we use it for.
    if (!is_gcc || linker == "gold") {
      ldflags += [ "-Wl,-z,relro" ]
    }

    if (is_gcc) {
      # This is predefined by Clang --target=*-fuchsia.
      # But the GCC toolchain is the generic --target=*-elf one.
      defines += [ "__Fuchsia__" ]

      # These are done by default in the Clang toolchain.
      cflags += [ "-fasynchronous-unwind-tables" ]
      ldflags += [
        "-Wl,--build-id",
        "-Wl,--eh-frame-hdr",
        "-Wl,--hash-style=gnu",
        "-Wl,-z,now",
      ]

      # In the Clang toolchain assembly files with no explicit marker don't
      # cause the presumption of executable stack as they do in GCC.
      ldflags += [ "-Wl,-z,noexecstack" ]

      if (current_cpu == "arm64") {
        # x18 is reserved in the Fuchsia ABI so it can be used
        # for things like -fsanitize=shadow-call-stack.
        cflags += [ "-ffixed-x18" ]
      }
    } else {
      # gcc defaults to enabling sized deallocation >= c++14; clang does not.
      # Enable sized-deallocation for the kernel, so the heap implementation can
      # optimize for or check generated sizes.
      cflags += [ "-fsized-deallocation" ]
    }
  } else if (current_os == "win") {
    # This enables build ID-like PDB UUIDs without timestamp.
    ldflags += [ "-Wl,/Brepro" ]
  }

  if (!is_gcc && crash_diagnostics_dir != "") {
    compiler_flags += [ "-fcrash-diagnostics-dir=" +
                        rebase_path(crash_diagnostics_dir, root_build_dir) ]
  }

  # The toolchain-supplied headers come after include_dirs from targets and
  # configs but before libc.
  foreach(dir, zircon_toolchain.include_dirs_cc) {
    cflags_cc += [
      "-isystem",
      rebase_path(dir, root_build_dir),
    ]
  }

  lib_dirs = zircon_toolchain.lib_dirs

  asmflags = compiler_flags
  cflags += compiler_flags
  ldflags += compiler_flags

  if (is_fuchsia && build_id_format != "") {
    ldflags += [ "-Wl,--build-id=$build_id_format" ]
  }
}

config("nolibc") {
  ldflags = [ "-nostartfiles" ]

  # Don't use -nostdlib, because the builtins (or libgcc) are what we want
  # and are otherwise annoying to find and specify.  It's just the -lc that
  # we really want to defeat, and that's handled by giving a -L that will
  # find exactly nothing but a dummy libc.so.  Clang has -nolibc to kill
  # the -lc, but for C++ it still uses -lm under -nolibc.  So this is still
  # needed to make -lm into a dummy, though for -lc only GCC needs it.
  lib_dirs = [ "libc-dummy" ]

  if (is_gcc) {
    # Include this in every link.
    # Note GN requires "./" so it doesn't think this should mean a -l switch.
    libs = [ "./dso_handle.ld" ]
  } else {
    # TODO(mcgrathr): GCC 9 has -nolibc, so use it when we get that toolchain.
    ldflags += [ "-nolibc" ]
  }
}

config("freestanding") {
  cflags = [ "-ffreestanding" ]

  # In Clang -fasynchronous-unwind-tables is the default for *-fuchsia
  # targets.  But -ffreestanding defeats that (in target-independent logic
  # in the Clang driver).  So add it back explicitly.  For GCC, it's
  # already added explicitly in :compiler regardless so don't double it.
  if (!is_gcc) {
    cflags += [ "-fasynchronous-unwind-tables" ]
  }

  ldflags = cflags
}

config("data_sections") {
  cflags = [ "-fdata-sections" ]
  ldflags = cflags
}

# The 'default_assert_level' will point to one of the assert_level_XXX values
# below. This allows targets or toolchains to opt out from the default and
# select a specific value.
config("assert_level_0") {
  defines = [
    "ZX_ASSERT_LEVEL=0",
    "NDEBUG",
  ]
}

group("assert_level_0_deps") {
}

config("assert_level_1") {
  defines = [ "ZX_ASSERT_LEVEL=1" ]
}

group("assert_level_1_deps") {
}

config("assert_level_2") {
  defines = [ "ZX_ASSERT_LEVEL=2" ]
}

group("assert_level_2_deps") {
}

config("default_assert_level") {
  assert(
      zx_assert_level >= 0 && zx_assert_level <= 2,
      "Invalid zx_assert_level value '$zx_assert_level', valid values are 0, 1 or 2")
  configs = [ ":assert_level_$zx_assert_level" ]
}

group("default_assert_level_deps") {
  # Implicit dependencies for 'default_assert_level' config.
}

# This is separate from default_optimize so it can be removed.
config("default_icf") {
  if (optimize != "none" && optimize != "debug") {
    # Our code should never rely on C's unique function pointer semantics,
    # which is broken by --icf=all for sometimes substantial space savings.
    configs = [ "//build/config:icf" ]
  }
}

config("default_template_backtrace_limit") {
  cflags_cc = [ "-ftemplate-backtrace-limit=0" ]
}

config("no_threadsafe_statics") {
  cflags_cc = [ "-fno-threadsafe-statics" ]
  cflags_objcc = cflags_cc
}

config("default_include_dirs") {
  include_dirs = [ "//zircon/system/public" ]
}

config("no_stack_protector") {
  cflags = [ "-fno-stack-protector" ]
}

config("no_safestack") {
  if (!is_gcc) {
    cflags = [ "-fno-sanitize=safe-stack" ]
  }
  configs = [ ":no_stack_protector" ]
}

group("no_safestack_deps") {
  # Each config added to a zircon_toolchain_suite() must have a corresponding
  # _deps group listing implicit dependencies if needed.
}

config("no_fuzzer") {
  if (!is_gcc) {
    cflags = [ "-fno-sanitize=fuzzer" ]
  }
}

# TODO(fxbug.dev/27266) Remove this once the warning with fit::variant is addressed.
config("no_maybe_uninitialized") {
  if (is_gcc) {
    cflags = [ "-Wno-maybe-uninitialized" ]
  }
}

config("machine") {
  if (is_fuchsia) {
    # TODO(fxbug.dev/32157): Really need to get this nailed down once and for all
    # and set by default in the compiler driver (Clang at least).
    ldflags = [ "-Wl,-z,max-page-size=4096" ]
  }
}

# TODO(fxbug.dev/54322): Use the config under //third_party/ulib/musl once the C
# library has been migrated to the GN build.
config("musl_headers") {
  _musl_dir = "//zircon/third_party/ulib/musl"
  visibility = [
    "${_musl_dir}/*",
    "//zircon/system/ulib/c:*",
  ]
  cflags = [
    "-idirafter",
    rebase_path("${_musl_dir}/include", root_build_dir),
  ]
  asmflags = cflags
}

config("user") {
  defines = [ "_ALL_SOURCE" ]
  configs = [
    ":nolibc",
    ":musl_headers",
  ]
}

config("user_executable") {
  # NOTE: Was only used in the 'user' Zircon build environment, which is
  # implemented by the Fuchsia build using the 'target' toolchain instead,
  # so this is not needed here.
}

config("integer-paranoia") {
  cflags = [
    "-fsanitize=integer-divide-by-zero,signed-integer-overflow",
    "-fsanitize-undefined-trap-on-error",
  ]
}

config("static-libc++") {
  if (current_os == "mac") {
    # The macOS driver doesn't support -static-libstdc++ properly, so pass
    # the libraries directly.  This has to locate the files explicitly in
    # the toolchain, because -lc++ would look for the shared library.
    ldflags = [
      "-nostdlib++",

      # NOTE: the path below was relative to toolchain.tool_dir in the Zircon build
      # but the Fuchsia one doesn't support GCC-based host builds at all, so this
      # is assuming Clang is always used instead.
      "${rebased_clang_prefix}/../lib/libc++.a",
    ]
  } else {
    ldflags = [ "-static-libstdc++" ]

    # TODO(fxbug.dev/26846): The implicitly linked static libc++.a depends on these.
    if (current_os == "linux") {
      libs = [
        "dl",
        "pthread",
      ]
    }
  }
}

# This config is used for code that needs to be purely position-independent
# without using dynamic relocation.  Since the compiler doesn't generally make
# guarantees about this, it's sometimes necessary to disable specific optimizations
# to ensure the code with this requirement doesn't get compiled in ways that won't
# work.  This config can be changed to add switches when those needs arise.
config("pure") {
}

config("rodso") {
  configs = [ ":pure" ]
  if (is_gcc) {
    inputs = [ "rodso.ld" ]
    ldflags = [ "-Wl,-T," + rebase_path(inputs[0], root_build_dir) ]
  }
}

group("rodso_deps") {
}

# This has to be variant() rather than config() to be used in the toolchain
# configs list.
variant("tiny") {
  cflags = [ "-mcmodel=tiny" ]
  asmflags = cflags
  ldflags = cflags
}

# Statically linked posititon independent executable.
#
# These have to be variant() rather than config() to be used in the toolchain
# configs list.
variant("static-pie-compile") {
  cflags = [ "-fPIE" ]
}

variant("static-pie-link") {
  ldflags = [
    "-Wl,-pie",
    "-Wl,--no-dynamic-linker",
  ]
}

# Disallow C++ static initializers in functions that require runtime init.
config("forbid-guard-variables") {
  if (!is_gcc) {
    cflags_cc = [
      "-Xclang",
      "-fforbid-guard-variables",
    ]
  }
}