| // Copyright 2018 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| library ddk.protocol.sdio; |
| |
| using zx; |
| |
| const uint8 SDIO_FN_0 = 0; |
| const uint8 SDIO_FN_1 = 1; |
| const uint8 SDIO_FN_2 = 2; |
| /// Including func 0 |
| const uint8 SDIO_MAX_FUNCS = 9; |
| |
| struct SdioFuncHwInfo { |
| uint32 manufacturer_id; |
| uint32 product_id; |
| uint32 max_blk_size; |
| uint32 max_tran_speed; |
| uint8 fn_intf_code; |
| }; |
| |
| enum SDIO_CARD : uint32 { |
| MULTI_BLOCK = 0x1; |
| SRW = 0x2; |
| DIRECT_COMMAND = 0x4; |
| SUSPEND_RESUME = 0x8; |
| LOW_SPEED = 0x10; |
| HIGH_SPEED = 0x20; |
| HIGH_POWER = 0x40; |
| FOUR_BIT_BUS = 0x80; |
| HS_SDR12 = 0x100; |
| HS_SDR25 = 0x200; |
| UHS_SDR50 = 0x400; |
| UHS_SDR104 = 0x800; |
| UHS_DDR50 = 0x1000; |
| TYPE_A = 0x2000; |
| TYPE_B = 0x4000; |
| TYPE_C = 0x8000; |
| TYPE_D = 0x10000; |
| }; |
| |
| struct SdioDeviceHwInfo { |
| /// number of sdio funcs including func 0 |
| uint32 num_funcs; |
| uint32 sdio_vsn; |
| uint32 cccr_vsn; |
| uint32 caps; |
| }; |
| |
| struct SdioHwInfo { |
| SdioDeviceHwInfo dev_hw_info; |
| array<SdioFuncHwInfo>:SDIO_MAX_FUNCS funcs_hw_info; |
| uint32 host_max_transfer_size; |
| }; |
| |
| struct SdioRwTxn { |
| uint32 addr; |
| uint32 data_size; |
| bool incr; |
| bool fifo; |
| bool write; |
| bool use_dma; |
| /// Used if use_dma is true |
| handle<vmo> dma_vmo; |
| /// Used if use_dma is false |
| vector<voidptr>? virt; |
| /// offset into dma_vmo or virt |
| uint64 buf_offset; |
| }; |
| |
| [Layout = "ddk-protocol"] |
| protocol Sdio { |
| GetDevHwInfo() -> (zx.status s, SdioHwInfo hw_info); |
| EnableFn(uint8 fn_idx) -> (zx.status s); |
| DisableFn(uint8 fn_idx) -> (zx.status s); |
| EnableFnIntr(uint8 fn_idx) -> (zx.status s); |
| DisableFnIntr(uint8 fn_idx) -> (zx.status s); |
| UpdateBlockSize(uint8 fn_idx, uint16 blk_sz, bool deflt) -> (zx.status s); |
| GetBlockSize(uint8 fn_idx) -> (zx.status s, uint16 cur_blk_size); |
| DoRwTxn(uint8 fn_idx, SdioRwTxn? txn) -> (zx.status s); |
| DoRwByte(bool write, uint8 fn_idx, uint32 addr, uint8 write_byte) -> (zx.status s, uint8 read_byte); |
| GetInBandIntr() -> (zx.status s, handle<interrupt> irq); |
| }; |