blob: 22c822e62fb135e85e841e3d9a212dc1334e04ad [file] [log] [blame]
// Copyright 2016 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "usb-bus.h"
#include <lib/ddk/debug.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fbl/alloc_checker.h>
#include "src/devices/usb/drivers/usb-bus/usb_bus_bind.h"
#include "usb-device.h"
namespace usb_bus {
zx_status_t UsbBus::Create(void* ctx, zx_device_t* parent) {
fbl::AllocChecker ac;
auto bus = fbl::make_unique_checked<UsbBus>(&ac, parent);
if (!ac.check()) {
return ZX_ERR_NO_MEMORY;
}
auto status = bus->Init();
if (status != ZX_OK) {
return status;
}
// devmgr is now in charge of the device.
__UNUSED auto* dummy = bus.release();
return ZX_OK;
}
zx_status_t UsbBus::Init() {
// Parent must support HCI protocol.
if (!hci_.is_valid()) {
return ZX_ERR_NOT_SUPPORTED;
}
auto max_device_count = hci_.GetMaxDeviceCount();
fbl::AllocChecker ac;
devices_.reset(new (&ac) fbl::RefPtr<UsbDevice>[max_device_count], max_device_count);
if (!ac.check()) {
return ZX_ERR_NO_MEMORY;
}
auto status = DdkAdd("usb-bus", DEVICE_ADD_NON_BINDABLE);
if (status != ZX_OK) {
return status;
}
hci_.SetBusInterface(this, &usb_bus_interface_protocol_ops_);
return ZX_OK;
}
zx_status_t UsbBus::UsbBusInterfaceAddDevice(uint32_t device_id, uint32_t hub_id,
usb_speed_t speed) {
if (device_id >= devices_.size()) {
return ZX_ERR_INVALID_ARGS;
}
if (devices_[device_id] != nullptr) {
return ZX_ERR_BAD_STATE;
}
// devices_[device_id] must be set before usb_device_add() creates the interface devices
// so we pass pointer to it here rather than setting it after usb_device_add() returns.
return UsbDevice::Create(zxdev(), hci_, device_id, hub_id, speed, &devices_[device_id]);
}
zx_status_t UsbBus::UsbBusInterfaceRemoveDevice(uint32_t device_id) {
if (device_id >= devices_.size()) {
zxlogf(ERROR, "%s: device_id out of range", __func__);
return ZX_ERR_INVALID_ARGS;
}
auto device = devices_[device_id];
if (device == nullptr) {
return ZX_ERR_BAD_STATE;
}
device->DdkAsyncRemove();
devices_[device_id].reset();
return ZX_OK;
}
zx_status_t UsbBus::UsbBusInterfaceResetPort(uint32_t hub_id, uint32_t port, bool enumerating) {
if (hub_id >= devices_.size()) {
zxlogf(ERROR, "%s: hub_id out of range", __func__);
return ZX_ERR_INVALID_ARGS;
}
auto device = devices_[hub_id];
if (device == nullptr) {
zxlogf(ERROR, "hub not found in %s", __func__);
return ZX_ERR_INVALID_ARGS;
}
auto status = device->HubResetPort(port);
// If we are calling reset in the middle of enumerating,
// the XHCI would already be trying to address the device next.
if (!enumerating) {
status = hci_.HubDeviceReset(hub_id, port);
}
return status;
}
zx_status_t UsbBus::UsbBusInterfaceReinitializeDevice(uint32_t device_id) {
if (device_id >= devices_.size()) {
zxlogf(ERROR, "%s: device_id out of range", __func__);
return ZX_ERR_INVALID_ARGS;
}
auto device = devices_[device_id];
if (device == nullptr) {
zxlogf(ERROR, "could not find device %u", device_id);
return ZX_ERR_INTERNAL;
}
// Check if the USB device descriptor changed, in which case we need to force the device to
// re-enumerate so we can load the uploaded device driver.
// This can happen during a Device Firmware Upgrade.
usb_device_descriptor_t old_desc;
usb_device_descriptor_t updated_desc;
size_t actual;
device->UsbGetDeviceDescriptor(&old_desc);
auto status =
device->GetDescriptor(USB_DT_DEVICE, 0, 0, &updated_desc, sizeof(updated_desc), &actual);
if (actual != sizeof(updated_desc)) {
status = ZX_ERR_IO;
}
if (status == ZX_OK) {
// TODO(jocelyndang): we may want to check other descriptors as well.
bool descriptors_changed =
memcmp(&old_desc, &updated_desc, sizeof(usb_device_descriptor_t)) != 0;
if (descriptors_changed) {
zxlogf(INFO, "device updated from VID 0x%x PID 0x%x to VID 0x%x PID 0x%x", old_desc.id_vendor,
old_desc.id_product, updated_desc.id_vendor, updated_desc.id_product);
status = UsbBusInterfaceRemoveDevice(device_id);
if (status != ZX_OK) {
zxlogf(ERROR, "could not remove device %u, got err %d", device_id, status);
return status;
}
status = UsbBusInterfaceAddDevice(device_id, device->GetHubId(), device->GetSpeed());
if (status != ZX_OK) {
zxlogf(ERROR, "could not add device %u, got err %d", device_id, status);
}
return status;
}
} else {
zxlogf(ERROR, "could not get updated descriptor: %d got len %lu", status, actual);
// We should try reinitializing the device anyway.
}
return device->Reinitialize();
}
zx_status_t UsbBus::GetDeviceId(/* zx_device_t* */ uint64_t device, uint32_t* out) {
usb_protocol_t usb;
if (device_get_protocol(reinterpret_cast<zx_device_t*>(device), ZX_PROTOCOL_USB, &usb) != ZX_OK) {
return ZX_ERR_INTERNAL;
}
auto id = usb_get_device_id(&usb);
if (id >= devices_.size()) {
return ZX_ERR_INTERNAL;
}
*out = id;
return ZX_OK;
}
zx_status_t UsbBus::UsbBusConfigureHub(/* zx_device_t* */ uint64_t hub_device, usb_speed_t speed,
const usb_hub_descriptor_t* desc, bool multi_tt) {
uint32_t hub_id;
if (GetDeviceId(hub_device, &hub_id) != ZX_OK) {
return ZX_ERR_INTERNAL;
}
return hci_.ConfigureHub(hub_id, speed, desc, multi_tt);
}
zx_status_t UsbBus::UsbBusDeviceAdded(/* zx_device_t* */ uint64_t hub_device, uint32_t port,
usb_speed_t speed) {
uint32_t hub_id;
if (GetDeviceId(hub_device, &hub_id) != ZX_OK) {
return ZX_ERR_INTERNAL;
}
return hci_.HubDeviceAdded(hub_id, port, speed);
}
zx_status_t UsbBus::UsbBusDeviceRemoved(/* zx_device_t* */ uint64_t hub_device, uint32_t port) {
uint32_t hub_id;
if (GetDeviceId(hub_device, &hub_id) != ZX_OK) {
return ZX_ERR_INTERNAL;
}
return hci_.HubDeviceRemoved(hub_id, port);
}
zx_status_t UsbBus::UsbBusSetHubInterface(/* zx_device_t* */ uint64_t usb_device,
const usb_hub_interface_protocol_t* hub) {
uint32_t usb_device_id;
auto status = GetDeviceId(usb_device, &usb_device_id);
if (status != ZX_OK) {
return status;
}
auto usb_dev = devices_[usb_device_id];
if (usb_dev == nullptr) {
zxlogf(ERROR, "%s: no device for usb_device_id %u", __func__, usb_device_id);
return ZX_ERR_INTERNAL;
}
usb_dev->SetHubInterface(hub);
return ZX_OK;
}
void UsbBus::DdkUnbind(ddk::UnbindTxn txn) {
hci_.SetBusInterface(nullptr, nullptr);
for (auto device : devices_) {
if (device != nullptr) {
device->DdkAsyncRemove();
}
}
devices_.reset();
txn.Reply();
}
void UsbBus::DdkRelease() { delete this; }
static constexpr zx_driver_ops_t driver_ops = []() {
zx_driver_ops_t ops = {};
ops.version = DRIVER_OPS_VERSION;
ops.bind = UsbBus::Create;
return ops;
}();
} // namespace usb_bus
ZIRCON_DRIVER(usb_bus, usb_bus::driver_ops, "zircon", "0.1");