sdk/fidl/fuchsia.hardware.sdio/sdio.fidl

// Copyright 2020 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

library fuchsia.hardware.sdio;

using zx;

/// SDIO max block size is 2048, so this is an arbitrary limit of 1024 blocks.
const uint32 MAX_TRANSFER_SIZE = 0x200000;

struct SdioFuncHwInfo {
    uint32 manufacturer_id;
    uint32 product_id;
    uint32 max_blk_size;
    uint32 max_tran_speed;
    uint8 fn_intf_code;
};

enum SdioDeviceCapabilities : uint32 {
    MULTI_BLOCK = 0x1;
    SRW = 0x2;
    DIRECT_COMMAND = 0x4;
    SUSPEND_RESUME = 0x8;
    LOW_SPEED = 0x10;
    HIGH_SPEED = 0x20;
    HIGH_POWER = 0x40;
    FOUR_BIT_BUS = 0x80;
    HS_SDR12 = 0x100;
    HS_SDR25 = 0x200;
    UHS_SDR50 = 0x400;
    UHS_SDR104 = 0x800;
    UHS_DDR50 = 0x1000;
    TYPE_A = 0x2000;
    TYPE_B = 0x4000;
    TYPE_C = 0x8000;
    TYPE_D = 0x10000;
};

struct SdioDeviceHwInfo {
    /// number of sdio funcs including func 0
    uint32 num_funcs;
    uint32 sdio_vsn;
    uint32 cccr_vsn;
    uint32 caps;
};

struct SdioHwInfo {
    SdioDeviceHwInfo dev_hw_info;
    array<SdioFuncHwInfo>:8 funcs_hw_info;
    uint32 host_max_transfer_size;
};

resource struct SdioRwTxn {
    uint32 addr;
    uint32 data_size;
    bool incr;
    bool write;
    bool use_dma;
    /// Used if use_dma is true
    zx.handle:VMO? dma_vmo;
    /// Used if use_dma is false
    vector<uint8>:MAX_TRANSFER_SIZE? virt;
    /// offset into dma_vmo or virt
    uint64 buf_offset;
};

protocol Device {
    GetDevHwInfo() -> (SdioHwInfo hw_info) error zx.status;
    EnableFn() -> () error zx.status;
    DisableFn() -> () error zx.status;
    EnableFnIntr() -> () error zx.status;
    DisableFnIntr() -> () error zx.status;
    UpdateBlockSize(uint16 blk_sz, bool deflt) -> () error zx.status;
    GetBlockSize() -> (uint16 cur_blk_size) error zx.status;
    DoRwTxn(SdioRwTxn txn) -> (SdioRwTxn txn) error zx.status;
    DoRwByte(bool write, uint32 addr, uint8 write_byte) -> (uint8 read_byte) error zx.status;
    GetInBandIntr() -> (zx.handle:INTERRUPT irq) error zx.status;
    /// The following functions access the card common control registers (CCCR) on function 0.
    /// Aborts an I/O operation occurring on the specified function.
    IoAbort() -> () error zx.status;
    /// Returns true if an interrupt is pending for function fn_idx, false otherwise.
    IntrPending() -> (bool pending) error zx.status;
    /// Reads or writes to a vendor CCCR register. addr must be in [0xF0, 0xFF].
    DoVendorControlRwByte(bool write, uint8 addr, uint8 write_byte)
        -> (uint8 read_byte) error zx.status;
};