zircon/system/dev/board/sherlock/sherlock-gpio.cc

// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include <ddk/debug.h>
#include <ddk/device.h>
#include <ddk/metadata.h>
#include <ddk/metadata/gpio.h>
#include <ddk/platform-defs.h>
#include <ddk/protocol/platform/bus.h>

#include <soc/aml-t931/t931-gpio.h>
#include <soc/aml-t931/t931-hw.h>

#include "sherlock-gpios.h"
#include "sherlock.h"

namespace sherlock {

static const pbus_mmio_t gpio_mmios[] = {
    {
        .base = T931_GPIO_BASE,
        .length = T931_GPIO_LENGTH,
    },
    {
        .base = T931_GPIO_A0_BASE,
        .length = T931_GPIO_AO_LENGTH,
    },
    {
        .base = T931_GPIO_INTERRUPT_BASE,
        .length = T931_GPIO_INTERRUPT_LENGTH,
    },
};

static const pbus_irq_t gpio_irqs[] = {
    {
        .irq = T931_GPIO_IRQ_0,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_1,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_2,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_3,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_4,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_5,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_6,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
    {
        .irq = T931_GPIO_IRQ_7,
        .mode = ZX_INTERRUPT_MODE_DEFAULT,
    },
};

// GPIOs to expose from generic GPIO driver.
static const gpio_pin_t gpio_pins[] = {
    // For wifi.
    {T931_WIFI_HOST_WAKE},
    // For display.
    {GPIO_PANEL_DETECT},
    {GPIO_LCD_RESET},
    // For touch screen.
    {GPIO_TOUCH_INTERRUPT},
    {GPIO_TOUCH_RESET},
    // For audio out.
    {GPIO_AUDIO_SOC_FAULT_L},
    {GPIO_SOC_AUDIO_EN},
    // For Camera.
    {GPIO_VANA_ENABLE},
    {GPIO_VDIG_ENABLE},
    {GPIO_CAM_RESET},
    {GPIO_LIGHT_INTERRUPT},
    // For SPI interface.
    {GPIO_SPICC0_SS0},
};

static const pbus_metadata_t gpio_metadata[] = {
    {
        .type = DEVICE_METADATA_GPIO_PINS,
        .data_buffer = &gpio_pins,
        .data_size = sizeof(gpio_pins),
    },
};

static pbus_dev_t gpio_dev = []() {
    pbus_dev_t dev;
    dev.name = "gpio";
    dev.vid = PDEV_VID_AMLOGIC;
    dev.pid = PDEV_PID_AMLOGIC_T931;
    dev.did = PDEV_DID_AMLOGIC_GPIO;
    dev.mmio_list = gpio_mmios;
    dev.mmio_count = countof(gpio_mmios);
    dev.irq_list = gpio_irqs;
    dev.irq_count = countof(gpio_irqs);
    dev.metadata_list = gpio_metadata;
    dev.metadata_count = countof(gpio_metadata);
    return dev;
}();

zx_status_t Sherlock::GpioInit() {
    zx_status_t status = pbus_.ProtocolDeviceAdd(ZX_PROTOCOL_GPIO_IMPL, &gpio_dev);
    if (status != ZX_OK) {
        zxlogf(ERROR, "%s: ProtocolDeviceAdd failed %d\n", __func__, status);
        return status;
    }
// This test binds to system/dev/gpio/gpio-test to check that GPIOs work at all.
// gpio-test enables interrupts and write/read on the test GPIOs configured below.
//#define GPIO_TEST
#ifdef GPIO_TEST
    const pbus_gpio_t gpio_test_gpios[] = {
        {
            .gpio = T931_GPIOZ(5), // Volume down, not used in this test.
        },
        {
            .gpio = T931_GPIOZ(4), // Volume up, to test gpio_get_interrupt().
        },
    };

    pbus_dev_t gpio_test_dev = {};
    gpio_test_dev.name = "sherlock-gpio-test";
    gpio_test_dev.vid = PDEV_VID_GENERIC;
    gpio_test_dev.pid = PDEV_PID_GENERIC;
    gpio_test_dev.did = PDEV_DID_GPIO_TEST;
    gpio_test_dev.gpio_list = gpio_test_gpios;
    gpio_test_dev.gpio_count = countof(gpio_test_gpios);
    if ((status = pbus_.DeviceAdd(&gpio_test_dev)) != ZX_OK) {
        zxlogf(ERROR, "%s: Could not add gpio_test_dev %d\n", __FUNCTION__, status);
        return status;
    }
#endif

    gpio_impl_ = ddk::GpioImplProtocolClient(parent());
    if (!gpio_impl_.is_valid()) {
        zxlogf(ERROR, "%s: device_get_protocol failed %d\n", __func__, status);
        return ZX_ERR_INTERNAL;
    }

    return ZX_OK;
}

} // namespace sherlock