zircon/system/dev/board/mt8167s_ref/mt8167-i2c.cc

// Copyright 2018 The Fuchsia Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include <ddk/debug.h>
#include <ddk/device.h>
#include <ddk/metadata.h>
#include <ddk/metadata/i2c.h>
#include <ddk/platform-defs.h>
#include <ddk/protocol/platform/bus.h>
#include <ddk/protocol/platform/device.h>

#include <soc/mt8167/mt8167-hw.h>

#include "mt8167.h"

namespace board_mt8167 {

zx_status_t Mt8167::I2cInit() {
    constexpr pbus_gpio_t i2c_gpios[] = {
        { 58 }, // SDA0_0
        { 59 }, // SCL0_0
        { 52 }, // SDA1_0
        { 53 }, // SCL1_0
        { 60 }, // SDA2_0
        { 61 }, // SCL2_0
    };

    constexpr pbus_mmio_t i2c_mmios[] = {
        {
            .base = MT8167_I2C0_BASE,
            .length = MT8167_I2C0_SIZE,
        },
        {
            .base = MT8167_I2C1_BASE,
            .length = MT8167_I2C1_SIZE,
        },
        {
            .base = MT8167_I2C2_BASE,
            .length = MT8167_I2C2_SIZE,
        },
        // MMIO for clocks.
        // TODO(andresoportus): Move this to a clock driver.
        {
            .base = MT8167_XO_BASE,
            .length = MT8167_XO_SIZE,
        },
    };

    constexpr pbus_irq_t i2c_irqs[] = {
        {
            .irq = MT8167_IRQ_I2C0,
            .mode = ZX_INTERRUPT_MODE_EDGE_HIGH,
        },
        {
            .irq = MT8167_IRQ_I2C1,
            .mode = ZX_INTERRUPT_MODE_EDGE_HIGH,
        },
        {
            .irq = MT8167_IRQ_I2C2,
            .mode = ZX_INTERRUPT_MODE_EDGE_HIGH,
        },
    };

    constexpr i2c_channel_t mt8167s_i2c_channels[] = {
        // For mt8167s_ref audio out
        {
            .bus_id = 2,
            .address = 0x48,
            .vid = 0,
            .pid = 0,
            .did = 0,
        },
        // For audio in
        {
            .bus_id = 1,
            .address = 0x1B,
            .vid = 0,
            .pid = 0,
            .did = 0,
        },
    };

    constexpr i2c_channel_t cleo_i2c_channels[] = {
        {
            .bus_id = 0,
            .address = 0x53,
            .vid = PDEV_VID_GENERIC,
            .pid = PDEV_PID_GENERIC,
            .did = PDEV_DID_LITE_ON_ALS,
        },
        {
            .bus_id = 0,
            .address = 0x18,
            .vid = PDEV_VID_GENERIC,
            .pid = PDEV_PID_GENERIC,
            .did = PDEV_DID_BOSCH_BMA253,
        },
        // For backlight driver
        {
            .bus_id = 2,
            .address = 0x36,
            .vid = 0,
            .pid = 0,
            .did = 0,
        },
        // For touch screen driver
        {
            .bus_id = 0,
            .address = 0x38,
            .vid = 0,
            .pid = 0,
            .did = 0,
        },
        // For cleo audio out
        {
            .bus_id = 2,
            .address = 0x2C,
            .vid = 0,
            .pid = 0,
            .did = 0,
        },
        // For audio in
        {
            .bus_id = 1,
            .address = 0x1B,
            .vid = 0,
            .pid = 0,
            .did = 0,
        },
    };

    const pbus_metadata_t mt8167s_i2c_metadata[] = {
        {
            .type = DEVICE_METADATA_I2C_CHANNELS,
            .data_buffer = &mt8167s_i2c_channels,
            .data_size = sizeof(mt8167s_i2c_channels),
        },
    };
    const pbus_metadata_t cleo_i2c_metadata[] = {
        {
            .type = DEVICE_METADATA_I2C_CHANNELS,
            .data_buffer = &cleo_i2c_channels,
            .data_size = sizeof(cleo_i2c_channels),
        },
    };

    pbus_dev_t i2c_dev = {};
    i2c_dev.name = "i2c0";
    i2c_dev.vid = PDEV_VID_MEDIATEK;
    i2c_dev.did = PDEV_DID_MEDIATEK_I2C;
    i2c_dev.mmio_list = i2c_mmios;
    i2c_dev.mmio_count = countof(i2c_mmios);
    i2c_dev.irq_list = i2c_irqs;
    i2c_dev.irq_count = countof(i2c_irqs);
    i2c_dev.gpio_list = i2c_gpios;
    i2c_dev.gpio_count = countof(i2c_gpios);


    if (board_info_.vid == PDEV_VID_GOOGLE && board_info_.pid == PDEV_PID_CLEO) {
        i2c_dev.metadata_list = cleo_i2c_metadata;
        i2c_dev.metadata_count = countof(cleo_i2c_metadata);
    } else if (board_info_.vid == PDEV_VID_MEDIATEK &&
               board_info_.pid == PDEV_PID_MEDIATEK_8167S_REF) {
        i2c_dev.metadata_list = mt8167s_i2c_metadata;
        i2c_dev.metadata_count = countof(mt8167s_i2c_metadata);
    } else {
        return ZX_ERR_NOT_SUPPORTED;
    }

    zx_status_t status = pbus_.DeviceAdd(&i2c_dev);
    if (status != ZX_OK) {
        zxlogf(ERROR, "%s: DeviceAdd failed %d\n", __FUNCTION__, status);
        return status;
    }

    return ZX_OK;
}

} // namespace board_mt8167