| // Copyright 2019 The Fuchsia Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include <inttypes.h> |
| #include <limits.h> |
| #include <sys/types.h> |
| #include <zircon/assert.h> |
| #include <zircon/compiler.h> |
| #include <zircon/process.h> |
| #include <zircon/syscalls.h> |
| #include <zircon/syscalls/iommu.h> |
| #include <zircon/syscalls/resource.h> |
| #include <zircon/threads.h> |
| |
| #include <acpica/acpi.h> |
| #include <ddk/debug.h> |
| #include <ddk/protocol/acpi.h> |
| #include <ddk/protocol/pciroot.h> |
| #include <ddk/protocol/sysmem.h> |
| |
| #include "acpi-private.h" |
| #include "dev.h" |
| #include "errors.h" |
| #include "init.h" |
| #include "iommu.h" |
| #include "methods.h" |
| #include "nhlt.h" |
| #include "pci.h" |
| #include "pciroot.h" |
| #include "power.h" |
| #include "resources.h" |
| #include "sysmem.h" |
| |
| static void acpi_device_release(void* ctx) { |
| acpi_device_t* dev = (acpi_device_t*)ctx; |
| free(dev); |
| } |
| |
| static zx_protocol_device_t acpi_device_proto = { |
| .version = DEVICE_OPS_VERSION, |
| .release = acpi_device_release, |
| }; |
| |
| typedef struct { |
| acpi_device_pio_resource_t* pio_resources; |
| size_t pio_resource_count; |
| size_t pio_resource_i; |
| |
| acpi_device_mmio_resource_t* mmio_resources; |
| size_t mmio_resource_count; |
| size_t mmio_resource_i; |
| |
| acpi_device_irq_t* irqs; |
| size_t irq_count; |
| size_t irq_i; |
| } acpi_crs_ctx_t; |
| |
| static ACPI_STATUS report_current_resources_resource_cb(ACPI_RESOURCE* res, void* _ctx) { |
| acpi_crs_ctx_t* ctx = (acpi_crs_ctx_t*)_ctx; |
| |
| if (resource_is_memory(res)) { |
| resource_memory_t mem; |
| zx_status_t st = resource_parse_memory(res, &mem); |
| // only expect fixed memory resource. resource_parse_memory sets minimum == maximum |
| // for this memory resource type. |
| if ((st != ZX_OK) || (mem.minimum != mem.maximum)) { |
| return AE_ERROR; |
| } |
| |
| ctx->mmio_resources[ctx->mmio_resource_i].writeable = mem.writeable; |
| ctx->mmio_resources[ctx->mmio_resource_i].base_address = mem.minimum; |
| ctx->mmio_resources[ctx->mmio_resource_i].alignment = mem.alignment; |
| ctx->mmio_resources[ctx->mmio_resource_i].address_length = mem.address_length; |
| |
| ctx->mmio_resource_i += 1; |
| |
| } else if (resource_is_address(res)) { |
| resource_address_t addr; |
| zx_status_t st = resource_parse_address(res, &addr); |
| if (st != ZX_OK) { |
| return AE_ERROR; |
| } |
| if ((addr.resource_type == RESOURCE_ADDRESS_MEMORY) && addr.min_address_fixed && |
| addr.max_address_fixed && (addr.maximum < addr.minimum)) { |
| ctx->mmio_resources[ctx->mmio_resource_i].writeable = true; |
| ctx->mmio_resources[ctx->mmio_resource_i].base_address = addr.min_address_fixed; |
| ctx->mmio_resources[ctx->mmio_resource_i].alignment = 0; |
| ctx->mmio_resources[ctx->mmio_resource_i].address_length = addr.address_length; |
| |
| ctx->mmio_resource_i += 1; |
| } |
| |
| } else if (resource_is_io(res)) { |
| resource_io_t io; |
| zx_status_t st = resource_parse_io(res, &io); |
| if (st != ZX_OK) { |
| return AE_ERROR; |
| } |
| |
| ctx->pio_resources[ctx->pio_resource_i].base_address = io.minimum; |
| ctx->pio_resources[ctx->pio_resource_i].alignment = io.alignment; |
| ctx->pio_resources[ctx->pio_resource_i].address_length = io.address_length; |
| |
| ctx->pio_resource_i += 1; |
| |
| } else if (resource_is_irq(res)) { |
| resource_irq_t irq; |
| zx_status_t st = resource_parse_irq(res, &irq); |
| if (st != ZX_OK) { |
| return AE_ERROR; |
| } |
| for (size_t i = 0; i < irq.pin_count; i++) { |
| ctx->irqs[ctx->irq_i].trigger = irq.trigger; |
| ctx->irqs[ctx->irq_i].polarity = irq.polarity; |
| ctx->irqs[ctx->irq_i].sharable = irq.sharable; |
| ctx->irqs[ctx->irq_i].wake_capable = irq.wake_capable; |
| ctx->irqs[ctx->irq_i].pin = irq.pins[i]; |
| |
| ctx->irq_i += 1; |
| } |
| } |
| |
| return AE_OK; |
| } |
| |
| static ACPI_STATUS report_current_resources_count_cb(ACPI_RESOURCE* res, void* _ctx) { |
| acpi_crs_ctx_t* ctx = (acpi_crs_ctx_t*)_ctx; |
| |
| if (resource_is_memory(res)) { |
| resource_memory_t mem; |
| zx_status_t st = resource_parse_memory(res, &mem); |
| if ((st != ZX_OK) || (mem.minimum != mem.maximum)) { |
| return AE_ERROR; |
| } |
| ctx->mmio_resource_count += 1; |
| |
| } else if (resource_is_address(res)) { |
| resource_address_t addr; |
| zx_status_t st = resource_parse_address(res, &addr); |
| if (st != ZX_OK) { |
| return AE_ERROR; |
| } |
| if ((addr.resource_type == RESOURCE_ADDRESS_MEMORY) && addr.min_address_fixed && |
| addr.max_address_fixed && (addr.maximum < addr.minimum)) { |
| ctx->mmio_resource_count += 1; |
| } |
| |
| } else if (resource_is_io(res)) { |
| resource_io_t io; |
| zx_status_t st = resource_parse_io(res, &io); |
| if (st != ZX_OK) { |
| return AE_ERROR; |
| } |
| ctx->pio_resource_count += 1; |
| |
| } else if (resource_is_irq(res)) { |
| ctx->irq_count += res->Data.Irq.InterruptCount; |
| } |
| |
| return AE_OK; |
| } |
| |
| static zx_status_t report_current_resources(acpi_device_t* dev) { |
| acpi_crs_ctx_t ctx; |
| memset(&ctx, 0, sizeof(ctx)); |
| |
| if (dev->got_resources) { |
| return ZX_OK; |
| } |
| |
| // call _CRS to count number of resources |
| ACPI_STATUS acpi_status = |
| AcpiWalkResources(dev->ns_node, (char*)"_CRS", report_current_resources_count_cb, &ctx); |
| if ((acpi_status != AE_NOT_FOUND) && (acpi_status != AE_OK)) { |
| return acpi_to_zx_status(acpi_status); |
| } |
| |
| if (ctx.pio_resource_count == 0 && ctx.mmio_resource_count == 0 && ctx.irq_count == 0) { |
| return ZX_OK; |
| } |
| |
| // allocate resources |
| ctx.pio_resources = calloc(ctx.pio_resource_count, sizeof(acpi_device_pio_resource_t)); |
| if (!ctx.pio_resources) { |
| return ZX_ERR_NO_MEMORY; |
| } |
| ctx.mmio_resources = calloc(ctx.mmio_resource_count, sizeof(acpi_device_mmio_resource_t)); |
| if (!ctx.mmio_resources) { |
| free(ctx.pio_resources); |
| return ZX_ERR_NO_MEMORY; |
| } |
| ctx.irqs = calloc(ctx.irq_count, sizeof(acpi_device_irq_t)); |
| if (!ctx.irqs) { |
| free(ctx.pio_resources); |
| free(ctx.mmio_resources); |
| return ZX_ERR_NO_MEMORY; |
| } |
| |
| // call _CRS again and fill in resources |
| acpi_status = |
| AcpiWalkResources(dev->ns_node, (char*)"_CRS", report_current_resources_resource_cb, &ctx); |
| if ((acpi_status != AE_NOT_FOUND) && (acpi_status != AE_OK)) { |
| free(ctx.pio_resources); |
| free(ctx.mmio_resources); |
| free(ctx.irqs); |
| return acpi_to_zx_status(acpi_status); |
| } |
| |
| dev->pio_resources = ctx.pio_resources; |
| dev->pio_resource_count = ctx.pio_resource_count; |
| dev->mmio_resources = ctx.mmio_resources; |
| dev->mmio_resource_count = ctx.mmio_resource_count; |
| dev->irqs = ctx.irqs; |
| dev->irq_count = ctx.irq_count; |
| |
| zxlogf(TRACE, "acpi-bus[%s]: found %zd port resources %zd memory resources %zx irqs\n", |
| device_get_name(dev->zxdev), dev->pio_resource_count, dev->mmio_resource_count, |
| dev->irq_count); |
| if (driver_get_log_flags() & DDK_LOG_SPEW) { |
| zxlogf(SPEW, "port resources:\n"); |
| for (size_t i = 0; i < dev->pio_resource_count; i++) { |
| zxlogf(SPEW, " %02zd: addr=0x%x length=0x%x align=0x%x\n", i, |
| dev->pio_resources[i].base_address, dev->pio_resources[i].address_length, |
| dev->pio_resources[i].alignment); |
| } |
| zxlogf(SPEW, "memory resources:\n"); |
| for (size_t i = 0; i < dev->mmio_resource_count; i++) { |
| zxlogf(SPEW, " %02zd: addr=0x%x length=0x%x align=0x%x writeable=%d\n", i, |
| dev->mmio_resources[i].base_address, dev->mmio_resources[i].address_length, |
| dev->mmio_resources[i].alignment, dev->mmio_resources[i].writeable); |
| } |
| zxlogf(SPEW, "irqs:\n"); |
| for (size_t i = 0; i < dev->irq_count; i++) { |
| const char* trigger; |
| switch (dev->irqs[i].trigger) { |
| case ACPI_IRQ_TRIGGER_EDGE: |
| trigger = "edge"; |
| break; |
| case ACPI_IRQ_TRIGGER_LEVEL: |
| trigger = "level"; |
| break; |
| default: |
| trigger = "bad_trigger"; |
| break; |
| } |
| const char* polarity; |
| switch (dev->irqs[i].polarity) { |
| case ACPI_IRQ_ACTIVE_BOTH: |
| polarity = "both"; |
| break; |
| case ACPI_IRQ_ACTIVE_LOW: |
| polarity = "low"; |
| break; |
| case ACPI_IRQ_ACTIVE_HIGH: |
| polarity = "high"; |
| break; |
| default: |
| polarity = "bad_polarity"; |
| break; |
| } |
| zxlogf(SPEW, " %02zd: pin=%u %s %s %s %s\n", i, dev->irqs[i].pin, trigger, polarity, |
| (dev->irqs[i].sharable == ACPI_IRQ_SHARED) ? "shared" : "exclusive", |
| dev->irqs[i].wake_capable ? "wake" : "nowake"); |
| } |
| } |
| |
| dev->got_resources = true; |
| |
| return ZX_OK; |
| } |
| |
| static zx_status_t acpi_op_get_pio(void* ctx, uint32_t index, zx_handle_t* out_pio) { |
| acpi_device_t* dev = (acpi_device_t*)ctx; |
| mtx_lock(&dev->lock); |
| |
| zx_status_t st = report_current_resources(dev); |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| |
| if (index >= dev->pio_resource_count) { |
| st = ZX_ERR_NOT_FOUND; |
| goto unlock; |
| } |
| |
| acpi_device_pio_resource_t* res = dev->pio_resources + index; |
| |
| zx_handle_t resource; |
| // Please do not use get_root_resource() in new code. See ZX-1467. |
| // TODO: figure out what to pass to name here |
| st = zx_resource_create(get_root_resource(), ZX_RSRC_KIND_IOPORT, res->base_address, |
| res->address_length, device_get_name(dev->zxdev), 0, &resource); |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| |
| *out_pio = resource; |
| |
| unlock: |
| mtx_unlock(&dev->lock); |
| return st; |
| } |
| |
| static zx_status_t acpi_op_get_mmio(void* ctx, uint32_t index, acpi_mmio_t* out_mmio) { |
| acpi_device_t* dev = (acpi_device_t*)ctx; |
| mtx_lock(&dev->lock); |
| |
| zx_status_t st = report_current_resources(dev); |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| |
| if (index >= dev->mmio_resource_count) { |
| st = ZX_ERR_NOT_FOUND; |
| goto unlock; |
| } |
| |
| acpi_device_mmio_resource_t* res = dev->mmio_resources + index; |
| if (((res->base_address & (PAGE_SIZE - 1)) != 0) || |
| ((res->address_length & (PAGE_SIZE - 1)) != 0)) { |
| zxlogf(ERROR, "acpi-bus[%s]: memory id=%d addr=0x%08x len=0x%x is not page aligned\n", |
| device_get_name(dev->zxdev), index, res->base_address, res->address_length); |
| st = ZX_ERR_NOT_FOUND; |
| goto unlock; |
| } |
| |
| zx_handle_t vmo; |
| size_t size = res->address_length; |
| // Please do not use get_root_resource() in new code. See ZX-1467. |
| st = zx_vmo_create_physical(get_root_resource(), res->base_address, size, &vmo); |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| |
| out_mmio->offset = 0; |
| out_mmio->size = size; |
| out_mmio->vmo = vmo; |
| |
| unlock: |
| mtx_unlock(&dev->lock); |
| return st; |
| } |
| |
| static zx_status_t acpi_op_map_interrupt(void* ctx, int64_t which_irq, zx_handle_t* out_handle) { |
| acpi_device_t* dev = (acpi_device_t*)ctx; |
| mtx_lock(&dev->lock); |
| |
| zx_status_t st = report_current_resources(dev); |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| |
| if ((uint)which_irq >= dev->irq_count) { |
| st = ZX_ERR_NOT_FOUND; |
| goto unlock; |
| } |
| |
| acpi_device_irq_t* irq = dev->irqs + which_irq; |
| uint32_t mode = ZX_INTERRUPT_MODE_DEFAULT; |
| st = ZX_OK; |
| switch (irq->trigger) { |
| case ACPI_IRQ_TRIGGER_EDGE: |
| switch (irq->polarity) { |
| case ACPI_IRQ_ACTIVE_BOTH: |
| mode = ZX_INTERRUPT_MODE_EDGE_BOTH; |
| break; |
| case ACPI_IRQ_ACTIVE_LOW: |
| mode = ZX_INTERRUPT_MODE_EDGE_LOW; |
| break; |
| case ACPI_IRQ_ACTIVE_HIGH: |
| mode = ZX_INTERRUPT_MODE_EDGE_HIGH; |
| break; |
| default: |
| st = ZX_ERR_INVALID_ARGS; |
| break; |
| } |
| break; |
| case ACPI_IRQ_TRIGGER_LEVEL: |
| switch (irq->polarity) { |
| case ACPI_IRQ_ACTIVE_LOW: |
| mode = ZX_INTERRUPT_MODE_LEVEL_LOW; |
| break; |
| case ACPI_IRQ_ACTIVE_HIGH: |
| mode = ZX_INTERRUPT_MODE_LEVEL_HIGH; |
| break; |
| default: |
| st = ZX_ERR_INVALID_ARGS; |
| break; |
| } |
| break; |
| default: |
| st = ZX_ERR_INVALID_ARGS; |
| break; |
| } |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| zx_handle_t handle; |
| // Please do not use get_root_resource() in new code. See ZX-1467. |
| st = zx_interrupt_create(get_root_resource(), irq->pin, ZX_INTERRUPT_REMAP_IRQ | mode, &handle); |
| if (st != ZX_OK) { |
| goto unlock; |
| } |
| *out_handle = handle; |
| |
| unlock: |
| mtx_unlock(&dev->lock); |
| return st; |
| } |
| |
| static zx_status_t acpi_op_get_bti(void* ctx, uint32_t bdf, uint32_t index, zx_handle_t* bti) { |
| // The x86 IOMMU world uses PCI BDFs as the hardware identifiers, so there |
| // will only be one BTI per device. |
| ZX_ASSERT(index == 0); |
| // For dummy IOMMUs, the bti_id just needs to be unique. For Intel IOMMUs, |
| // the bti_ids correspond to PCI BDFs. |
| zx_handle_t iommu_handle; |
| zx_status_t status = iommu_manager_iommu_for_bdf(bdf, &iommu_handle); |
| if (status != ZX_OK) { |
| return status; |
| } |
| return zx_bti_create(iommu_handle, 0, bdf, bti); |
| } |
| |
| static zx_status_t acpi_op_connect_sysmem(void* ctx, zx_handle_t handle) { |
| acpi_device_t* dev = (acpi_device_t*)ctx; |
| mtx_lock(&dev->lock); |
| |
| sysmem_protocol_t sysmem; |
| zx_status_t st = device_get_protocol(dev->platform_bus, ZX_PROTOCOL_SYSMEM, &sysmem); |
| if (st != ZX_OK) { |
| zx_handle_close(handle); |
| goto unlock; |
| } |
| st = sysmem_connect(&sysmem, handle); |
| unlock: |
| mtx_unlock(&dev->lock); |
| return st; |
| } |
| |
| static zx_status_t acpi_op_register_sysmem_heap(void* ctx, uint64_t heap, zx_handle_t handle) { |
| acpi_device_t* dev = (acpi_device_t*)ctx; |
| mtx_lock(&dev->lock); |
| |
| sysmem_protocol_t sysmem; |
| zx_status_t st = device_get_protocol(dev->platform_bus, ZX_PROTOCOL_SYSMEM, &sysmem); |
| if (st != ZX_OK) { |
| zx_handle_close(handle); |
| goto unlock; |
| } |
| |
| st = sysmem_register_heap(&sysmem, heap, handle); |
| unlock: |
| mtx_unlock(&dev->lock); |
| return st; |
| } |
| |
| // TODO marking unused until we publish some devices |
| static __attribute__((unused)) acpi_protocol_ops_t acpi_proto = { |
| .get_pio = acpi_op_get_pio, |
| .get_mmio = acpi_op_get_mmio, |
| .map_interrupt = acpi_op_map_interrupt, |
| .get_bti = acpi_op_get_bti, |
| .connect_sysmem = acpi_op_connect_sysmem, |
| .register_sysmem_heap = acpi_op_register_sysmem_heap, |
| }; |
| |
| static const char* hid_from_acpi_devinfo(ACPI_DEVICE_INFO* info) { |
| const char* hid = NULL; |
| if ((info->Valid & ACPI_VALID_HID) && (info->HardwareId.Length > 0) && |
| ((info->HardwareId.Length - 1) <= sizeof(uint64_t))) { |
| hid = (const char*)info->HardwareId.String; |
| } |
| return hid; |
| } |
| |
| zx_device_t* publish_device(zx_device_t* parent, zx_device_t* platform_bus, ACPI_HANDLE handle, |
| ACPI_DEVICE_INFO* info, const char* name, uint32_t protocol_id, |
| void* protocol_ops) { |
| zx_device_prop_t props[4]; |
| int propcount = 0; |
| |
| char acpi_name[5] = {0}; |
| if (!name) { |
| memcpy(acpi_name, &info->Name, sizeof(acpi_name) - 1); |
| name = (const char*)acpi_name; |
| } |
| |
| // Publish HID in device props |
| const char* hid = hid_from_acpi_devinfo(info); |
| if (hid) { |
| props[propcount].id = BIND_ACPI_HID_0_3; |
| props[propcount++].value = htobe32(*((uint32_t*)(hid))); |
| props[propcount].id = BIND_ACPI_HID_4_7; |
| props[propcount++].value = htobe32(*((uint32_t*)(hid + 4))); |
| } |
| |
| // Publish the first CID in device props |
| const char* cid = (const char*)info->CompatibleIdList.Ids[0].String; |
| if ((info->Valid & ACPI_VALID_CID) && (info->CompatibleIdList.Count > 0) && |
| ((info->CompatibleIdList.Ids[0].Length - 1) <= sizeof(uint64_t))) { |
| props[propcount].id = BIND_ACPI_CID_0_3; |
| props[propcount++].value = htobe32(*((uint32_t*)(cid))); |
| props[propcount].id = BIND_ACPI_CID_4_7; |
| props[propcount++].value = htobe32(*((uint32_t*)(cid + 4))); |
| } |
| |
| if (driver_get_log_flags() & DDK_LOG_SPEW) { |
| // ACPI names are always 4 characters in a uint32 |
| zxlogf(SPEW, "acpi: got device %s\n", acpi_name); |
| if (info->Valid & ACPI_VALID_HID) { |
| zxlogf(SPEW, " HID=%s\n", info->HardwareId.String); |
| } else { |
| zxlogf(SPEW, " HID=invalid\n"); |
| } |
| if (info->Valid & ACPI_VALID_ADR) { |
| zxlogf(SPEW, " ADR=0x%" PRIx64 "\n", (uint64_t)info->Address); |
| } else { |
| zxlogf(SPEW, " ADR=invalid\n"); |
| } |
| if (info->Valid & ACPI_VALID_CID) { |
| zxlogf(SPEW, " CIDS=%d\n", info->CompatibleIdList.Count); |
| for (uint i = 0; i < info->CompatibleIdList.Count; i++) { |
| zxlogf(SPEW, " [%u] %s\n", i, info->CompatibleIdList.Ids[i].String); |
| } |
| } else { |
| zxlogf(SPEW, " CID=invalid\n"); |
| } |
| zxlogf(SPEW, " devprops:\n"); |
| for (int i = 0; i < propcount; i++) { |
| zxlogf(SPEW, " [%d] id=0x%08x value=0x%08x\n", i, props[i].id, props[i].value); |
| } |
| } |
| |
| acpi_device_t* dev = calloc(1, sizeof(acpi_device_t)); |
| if (!dev) { |
| return NULL; |
| } |
| dev->platform_bus = platform_bus; |
| |
| dev->ns_node = handle; |
| |
| device_add_args_t args = { |
| .version = DEVICE_ADD_ARGS_VERSION, |
| .name = name, |
| .ctx = dev, |
| .ops = &acpi_device_proto, |
| .proto_id = protocol_id, |
| .proto_ops = protocol_ops, |
| .props = (propcount > 0) ? props : NULL, |
| .prop_count = propcount, |
| }; |
| |
| zx_status_t status; |
| if ((status = device_add(parent, &args, &dev->zxdev)) != ZX_OK) { |
| zxlogf(ERROR, "acpi: error %d in device_add, parent=%s(%p)\n", status, device_get_name(parent), |
| parent); |
| free(dev); |
| return NULL; |
| } else { |
| zxlogf(ERROR, "acpi: published device %s(%p), parent=%s(%p), handle=%p\n", name, dev, |
| device_get_name(parent), parent, (void*)dev->ns_node); |
| return dev->zxdev; |
| } |
| } |
| |
| static void acpi_apply_workarounds(ACPI_HANDLE object, ACPI_DEVICE_INFO* info) { |
| ACPI_STATUS acpi_status; |
| // Slate workaround: Turn on the HID controller. |
| if (!memcmp(&info->Name, "I2C0", 4)) { |
| ACPI_BUFFER buffer = { |
| .Length = ACPI_ALLOCATE_BUFFER, |
| .Pointer = NULL, |
| }; |
| acpi_status = AcpiEvaluateObject(object, (char*)"H00A._PR0", NULL, &buffer); |
| if (acpi_status == AE_OK) { |
| ACPI_OBJECT* pkg = buffer.Pointer; |
| for (unsigned i = 0; i < pkg->Package.Count; i++) { |
| ACPI_OBJECT* ref = &pkg->Package.Elements[i]; |
| if (ref->Type != ACPI_TYPE_LOCAL_REFERENCE) { |
| zxlogf(TRACE, "acpi: Ignoring wrong type 0x%x\n", ref->Type); |
| } else { |
| zxlogf(TRACE, "acpi: Enabling HID controller at I2C0.H00A._PR0[%u]\n", i); |
| acpi_status = AcpiEvaluateObject(ref->Reference.Handle, (char*)"_ON", NULL, NULL); |
| if (acpi_status != AE_OK) { |
| zxlogf(ERROR, "acpi: acpi error 0x%x in I2C0._PR0._ON\n", acpi_status); |
| } |
| } |
| } |
| AcpiOsFree(buffer.Pointer); |
| } |
| } |
| // Acer workaround: Turn on the HID controller. |
| else if (!memcmp(&info->Name, "I2C1", 4)) { |
| zxlogf(TRACE, "acpi: Enabling HID controller at I2C1\n"); |
| acpi_status = AcpiEvaluateObject(object, (char*)"_PS0", NULL, NULL); |
| if (acpi_status != AE_OK) { |
| zxlogf(ERROR, "acpi: acpi error in I2C1._PS0: 0x%x\n", acpi_status); |
| } |
| } |
| } |
| |
| static ACPI_STATUS acpi_ns_walk_callback(ACPI_HANDLE object, uint32_t nesting_level, void* context, |
| void** status) { |
| ACPI_DEVICE_INFO* info = NULL; |
| ACPI_STATUS acpi_status = AcpiGetObjectInfo(object, &info); |
| if (acpi_status != AE_OK) { |
| return acpi_status; |
| } |
| |
| publish_acpi_device_ctx_t* ctx = (publish_acpi_device_ctx_t*)context; |
| zx_device_t* acpi_root = ctx->acpi_root; |
| zx_device_t* sys_root = ctx->sys_root; |
| zx_device_t* platform_bus = ctx->platform_bus; |
| |
| acpi_apply_workarounds(object, info); |
| if (!memcmp(&info->Name, "HDAS", 4)) { |
| // We must have already seen at least one PCI root due to traversal order. |
| if (ctx->last_pci == 0xFF) { |
| zxlogf(ERROR, "acpi: Found HDAS node, but no prior PCI root was discovered!\n"); |
| } else if (!(info->Valid & ACPI_VALID_ADR)) { |
| zxlogf(ERROR, "acpi: no valid ADR found for HDA device\n"); |
| } else { |
| // Attaching metadata to the HDAS device /dev/sys/pci/... |
| zx_status_t status = |
| nhlt_publish_metadata(sys_root, ctx->last_pci, (uint64_t)info->Address, object); |
| if ((status != ZX_OK) && (status != ZX_ERR_NOT_FOUND)) { |
| zxlogf(ERROR, "acpi: failed to publish NHLT metadata\n"); |
| } |
| } |
| } |
| |
| const char* hid = hid_from_acpi_devinfo(info); |
| if (hid == 0) { |
| goto out; |
| } |
| const char* cid = NULL; |
| if ((info->Valid & ACPI_VALID_CID) && (info->CompatibleIdList.Count > 0) && |
| // IDs may be 7 or 8 bytes, and Length includes the null byte |
| (info->CompatibleIdList.Ids[0].Length == HID_LENGTH || |
| info->CompatibleIdList.Ids[0].Length == HID_LENGTH + 1)) { |
| cid = (const char*)info->CompatibleIdList.Ids[0].String; |
| } |
| |
| if ((!memcmp(hid, PCI_EXPRESS_ROOT_HID_STRING, HID_LENGTH) || |
| !memcmp(hid, PCI_ROOT_HID_STRING, HID_LENGTH))) { |
| pci_init(sys_root, object, info, ctx); |
| } else if (!memcmp(hid, BATTERY_HID_STRING, HID_LENGTH)) { |
| battery_init(acpi_root, object); |
| } else if (!memcmp(hid, LID_HID_STRING, HID_LENGTH)) { |
| lid_init(acpi_root, object); |
| } else if (!memcmp(hid, PWRSRC_HID_STRING, HID_LENGTH)) { |
| pwrsrc_init(acpi_root, object); |
| } else if (!memcmp(hid, EC_HID_STRING, HID_LENGTH)) { |
| ec_init(acpi_root, object); |
| } else if (!memcmp(hid, GOOGLE_TBMC_HID_STRING, HID_LENGTH)) { |
| tbmc_init(acpi_root, object); |
| } else if (!memcmp(hid, GOOGLE_CROS_EC_HID_STRING, HID_LENGTH)) { |
| cros_ec_lpc_init(acpi_root, object); |
| } else if (!memcmp(hid, DPTF_THERMAL_HID_STRING, HID_LENGTH)) { |
| thermal_init(acpi_root, info, object); |
| } else if (!memcmp(hid, I8042_HID_STRING, HID_LENGTH) || |
| (cid && !memcmp(cid, I8042_HID_STRING, HID_LENGTH))) { |
| publish_device(acpi_root, platform_bus, object, info, "i8042", ZX_PROTOCOL_ACPI, &acpi_proto); |
| } else if (!memcmp(hid, RTC_HID_STRING, HID_LENGTH) || |
| (cid && !memcmp(cid, RTC_HID_STRING, HID_LENGTH))) { |
| publish_device(acpi_root, platform_bus, object, info, "rtc", ZX_PROTOCOL_ACPI, &acpi_proto); |
| } else if (!memcmp(hid, GOLDFISH_PIPE_HID_STRING, HID_LENGTH)) { |
| publish_device(acpi_root, platform_bus, object, info, "goldfish", ZX_PROTOCOL_ACPI, |
| &acpi_proto); |
| } else if (!memcmp(hid, SERIAL_HID_STRING, HID_LENGTH)) { |
| publish_device(acpi_root, platform_bus, object, info, "serial", ZX_PROTOCOL_ACPI, &acpi_proto); |
| } |
| |
| out: |
| ACPI_FREE(info); |
| |
| return AE_OK; |
| } |
| |
| zx_status_t acpi_suspend(uint32_t flags) { |
| switch (flags & DEVICE_SUSPEND_REASON_MASK) { |
| case DEVICE_SUSPEND_FLAG_MEXEC: { |
| AcpiTerminate(); |
| return ZX_OK; |
| } |
| case DEVICE_SUSPEND_FLAG_REBOOT: |
| if (flags == DEVICE_SUSPEND_FLAG_REBOOT_BOOTLOADER) { |
| reboot_bootloader(); |
| } else if (flags == DEVICE_SUSPEND_FLAG_REBOOT_RECOVERY) { |
| reboot_recovery(); |
| } else { |
| reboot(); |
| } |
| // Kill this driver so that the IPC channel gets closed; devmgr will |
| // perform a fallback that should shutdown or reboot the machine. |
| exit(0); |
| case DEVICE_SUSPEND_FLAG_POWEROFF: |
| poweroff(); |
| exit(0); |
| case DEVICE_SUSPEND_FLAG_SUSPEND_RAM: |
| return suspend_to_ram(); |
| default: |
| return ZX_ERR_NOT_SUPPORTED; |
| }; |
| } |
| |
| zx_status_t acpi_init(void) { return init(); } |
| |
| zx_status_t publish_acpi_devices(zx_device_t* parent, zx_device_t* sys_root, |
| zx_device_t* acpi_root) { |
| zx_status_t status = pwrbtn_init(acpi_root); |
| if (status != ZX_OK) { |
| zxlogf(ERROR, "acpi: failed to initialize pwrbtn device: %d\n", status); |
| } |
| |
| // Walk the ACPI namespace for devices and publish them |
| // Only publish a single PCI device |
| publish_acpi_device_ctx_t ctx = { |
| .acpi_root = acpi_root, |
| .sys_root = sys_root, |
| .platform_bus = parent, |
| .found_pci = false, |
| .last_pci = 0xFF, |
| }; |
| ACPI_STATUS acpi_status = |
| AcpiWalkNamespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, MAX_NAMESPACE_DEPTH, |
| acpi_ns_walk_callback, NULL, &ctx, NULL); |
| if (acpi_status != AE_OK) { |
| return ZX_ERR_BAD_STATE; |
| } else { |
| return ZX_OK; |
| } |
| } |