| # Copyright (c) 2015-2016 The Khronos Group Inc. | |
| # Copyright (c) 2015-2016 Valve Corporation | |
| # Copyright (c) 2015-2016 LunarG, Inc. | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| # Author: David Pinedo <david@LunarG.com> | |
| # Author: Mark Young <mark@LunarG.com> | |
| # | |
| # This Powershell script is used by the Vulkan Run Time Installer/Uninstaller to: | |
| # - Copy the most recent vulkan-<majorabi>-*.dll in C:\Windows\System32 | |
| # to vulkan-<majorabi>.dll | |
| # - Copy the most recent version of vulkaninfo-<abimajor>-*.exe in | |
| # C:\Windows\System32 to vulkaninfo.exe | |
| # - The same thing is done for those files in C:\Windows\SysWOW64 on a 64-bit | |
| # target. | |
| # - Set the layer registry entries to point to the layer json files | |
| # in the Vulkan SDK associated with the most recent vulkan*dll. | |
| # | |
| # This script can be called with the following two parameters: | |
| # $majorabi : a single string number specifying the major abi version. | |
| # $ossize : an integer indicating if the target is a 64 (64) or 32 (32) bit OS. | |
| # | |
| # majorabi and ossize are either prepended to this script or specificied as args | |
| Param( | |
| [string]$majorabiarg, | |
| [int]$ossizearg | |
| ) | |
| if ($majorabi -eq $null) { | |
| $majorabi=$majorabiarg | |
| } | |
| if ($ossize -eq $null) { | |
| $ossize=$ossizearg | |
| } | |
| function WriteToLog ($x) { | |
| echo $x | Out-File -encoding ascii -append -filepath $script:log | |
| } | |
| function notNumeric ($x) { | |
| try { | |
| 0 + $x | Out-Null | |
| return $false | |
| } catch { | |
| return $true | |
| } | |
| } | |
| function setScriptReturnValue($rvalue) { | |
| if ($script:scriptReturnValue -eq 0) { | |
| $script:scriptReturnValue = $rvalue | |
| } | |
| } | |
| # Clear any pre-existing errors and set default return value | |
| $Error.Clear(); | |
| $script:scriptReturnValue=0 | |
| # Start logging | |
| $script:log=$Env:Temp+"\ConfigLayersAndVulkanDLL.log" | |
| Remove-Item $script:log | |
| # Ignore errors related to log file | |
| $Error.Clear(); | |
| WriteToLog "ConfigLayersAndVulkanDLL.ps1 called with inputs of : $majorabi $ossize" | |
| $startTime=Get-Date | |
| WriteToLog "Start time : $startTime" | |
| WriteToLog "Poweshell Version information:" | |
| WriteToLog $PsVersionTable | |
| $vulkandll = "vulkan-"+$majorabi+".dll" | |
| $windrive = $env:SYSTEMDRIVE | |
| $winfolder = $env:SYSTEMROOT | |
| $script:VulkanDllList=@() | |
| # The name of the versioned vulkan dll file is one of the following: | |
| # | |
| # vulkan-<majorabi>-<major>-<minor>-<patch>-<buildno>-<prerelease>-<prebuildno> | |
| # vulkan-<majorabi>-<major>-<minor>-<patch>-<buildno>-<prerelease> | |
| # vulkan-<majorabi>-<major>-<minor>-<patch>-<buildno>-<prebuildno> | |
| # vulkan-<majorabi>-<major>-<minor>-<patch>-<buildno>.dll | |
| # | |
| # <major>, <minor>, <patch>, <buildno> and <prebuildno> are 1 to 10 numeric digits. | |
| # <prerelease> is any combination of alpha and numeric characters. | |
| # If <prerelease> and/or <prebuildno> are present, this identifies a prerelease, | |
| # and the vulkan dll file will be considered less recent than one with the same | |
| # <major>, <minor>, <patch>, <buildno> numbers without the <prerelease> and/or | |
| # <prebuildno>. | |
| # We first create an array, with one array element for each vulkan-*dll in | |
| # C:\Windows\System32 (and C:\Windows\SysWOW64 on 64-bit systems), with each element | |
| # containing: | |
| # <major>=<minor>=<patch>=<buildno>=<prebuildno>=<prerelease>= | |
| # filename | |
| # @<major>@<minor>@<patch>@<buildno>@<prerelease>@<prebuildno>@ | |
| # [Note that the above three lines are one element in the array.] | |
| # The build identifiers separated by "=" are suitable for sorting, i.e. | |
| # expanded to 10 digits with leading 0s. If <prerelease> or <prebuildno> are | |
| # not specified, "zzzzzzzzzz" is substituted for them, so that they sort | |
| # to a position after those that do specify them. Note that <prerelease> | |
| # is "less significant" in the sort than <prebuildno>, and that <prerelease> is | |
| # always treated as an alpha string, even though it may contain numeric characters. | |
| # The build identifiers separated by "@" are the original values extracted | |
| # from the file name. They are used later to find the path to the SDK | |
| # install directory for the given filename. | |
| function UpdateVulkanSysFolder([string]$dir, [int]$writeSdkName) | |
| { | |
| WriteToLog "UpdateVulkanSysFolder $dir $writeSdkName" | |
| # Push the current path on the stack and go to $dir | |
| Push-Location -Path $dir | |
| # Create a list for all the DLLs in the folder. | |
| # First Initialize the list to empty | |
| $script:VulkanDllList = @() | |
| # Find all vulkan dll files in this directory | |
| dir -name vulkan-$majorabi-*.dll | | |
| ForEach-Object { | |
| WriteToLog "File $_" | |
| if ($_ -match "=" -or | |
| $_ -match "@" -or | |
| $_ -match " " -or | |
| ($_.Split('-').count -lt 6) -or | |
| ($_.Split('-').count -gt 8) -or | |
| !$?) | |
| { | |
| # If a file name contains "=", "@", or " ", or it contains less then 5 dashes or more than | |
| # 7 dashes, it wasn't installed by the Vulkan Run Time. | |
| # Note that we need to use return inside of ForEach-Object is to continue with iteration. | |
| WriteToLog "Ignoring $_ - bad format" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| # If the corresponding vulkaninfo is not present, it wasn't installed by the Vulkan Run Time | |
| $vulkaninfo=$_ -replace ".dll",".exe" | |
| $vulkaninfo=$vulkaninfo -replace "vulkan","vulkaninfo" | |
| if (-not (Test-Path $vulkaninfo) -or | |
| !$?) { | |
| WriteToLog "Rejected $_ - $vulkaninfo not present" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| $major=$_.Split('-')[2] | |
| $majorOrig=$major | |
| $minor=$_.Split('-')[3] | |
| $minorOrig=$minor | |
| $patch=$_.Split('-')[4] | |
| $patchOrig=$patch | |
| $buildno=$_.Split('-')[5] | |
| if ($buildno -match ".dll") { | |
| # prerelease and prebuildno are not in the name | |
| # Extract buildno, and set prerelease and prebuildno to "z"s | |
| $buildno=$buildno -replace ".dll","" | |
| $buildnoOrig=$buildno | |
| $prerelease="z"*10 | |
| $prereleaseOrig="" | |
| $prebuildno="z"*10 | |
| $prebuildnoOrig="" | |
| } else { | |
| # Extract buildno, prerelease, and prebuildno | |
| $f=$_ -replace ".dll","" | |
| $buildno=$f.Split('-')[5] | |
| $buildnoOrig=$buildno | |
| $prerelease=$f.Split('-')[6] | |
| $prebuildno=$f.Split('-')[7] | |
| if ($prebuildno.Length -eq 0) { | |
| if ($prerelease -match "^[0-9]") { | |
| # prerelease starts with a digit, it must be the prebuildno | |
| $prebuildno=$prerelease | |
| $prerelease="" | |
| } | |
| } | |
| $prereleaseOrig=$prerelease | |
| $prebuildnoOrig=$prebuildno | |
| if ($prerelease.Length -eq 0) { | |
| $prerelease="z"*10 | |
| } | |
| if ($prebuildno.Length -eq 0) { | |
| $prebuildno="z"*10 | |
| } | |
| } | |
| WriteToLog "Version $majorOrig $minorOrig $patchOrig $buildnoOrig $prereleaseOrig $prebuildnoOrig" | |
| if (!$?) { | |
| WriteToLog "Ignoring version $majorOrig $minorOrig $patchOrig $buildnoOrig $prereleaseOrig $prebuildnoOrig" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| # Make sure fields that are supposed to be numbers are numbers | |
| if (notNumeric($major)) { | |
| WriteToLog "Ignoring $_ - bad major" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| if (notNumeric($minor)) { | |
| WriteToLog "Ignoring $_ - bad minor" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| if (notNumeric($patch)) { | |
| WriteToLog "Ignoring $_ - bad patch" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| if (notNumeric($buildno)) { | |
| WriteToLog "Ignoring $_ - bad buildno" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| if (notNumeric($prebuildno)) { | |
| if ($prebuildno -ne "z"*10) { | |
| WriteToLog "Ignoring $_ - bad prebuildno" | |
| # Not a real error, so just clear it for now. | |
| $Error.Clear(); | |
| # NOTE: Inside a ForEach-Object block, the 'return' call behaves like a 'continue' for a For loop | |
| return | |
| } | |
| } | |
| $major = $major.padleft(10,'0') | |
| $minor = $minor.padleft(10,'0') | |
| $patch = $patch.padleft(10,'0') | |
| $buildno = $buildno.padleft(10,'0') | |
| $prerelease = $prerelease.padright(10,'z') | |
| $prebuildno = $prebuildno.padleft(10,'0') | |
| # Add a new element to the $VulkanDllList array | |
| WriteToLog "Adding $_ to Vulkan dll list " | |
| $script:VulkanDllList+="$major=$minor=$patch=$buildno=$prebuildno=$prerelease= $_ @$majorOrig@$minorOrig@$patchOrig@$buildnoOrig@$prereleaseOrig@$prebuildnoOrig@" | |
| if (!$?) { | |
| WriteToLog "Error: UpdateVulkanSysFolder adding DLL $_ to list" | |
| setScriptReturnValue(10) | |
| } | |
| } | |
| # If $VulkanDllList contains at least one element, there's at least one vulkan*.dll file. | |
| # Copy the most recent vulkan*.dll (named in the last element of $VulkanDllList) to vulkan-$majorabi.dll. | |
| if ($script:VulkanDllList.Length -gt 0) { | |
| # Sort the list. The most recent vulkan-*.dll will be in the last element of the list. | |
| [array]::sort($script:VulkanDllList) | |
| if (!$?) { | |
| WriteToLog "Error: UpdateVulkanSysFolder sorting DLL list" | |
| setScriptReturnValue(20) | |
| } | |
| # Put the name of the most recent vulkan-*.dll in $mrVulkanDLL. | |
| # The most recent vulkanDLL is the second word in the last element of the | |
| # sorted $VulkanDllList. Copy it to $vulkandll. | |
| $mrVulkanDll=$script:VulkanDllList[-1].Split(' ')[1] | |
| WriteToLog "Copying $mrVulkanDll $vulkandll" | |
| Copy-Item $mrVulkanDll $vulkandll -force | |
| if (!$?) { | |
| WriteToLog "Error: UpdateVulkanSysFolder encountered error during copy $mrVulkanDll $vulkandll" | |
| setScriptReturnValue(30) | |
| } | |
| # Copy the most recent version of vulkaninfo-<abimajor>-*.exe to vulkaninfo.exe. | |
| # We create the source file name for the copy from $mrVulkanDll. | |
| $mrVulkaninfo=$mrVulkanDll -replace ".dll",".exe" | |
| $mrVulkaninfo=$mrVulkaninfo -replace "vulkan","vulkaninfo" | |
| WriteToLog "Copying $mrVulkaninfo vulkaninfo.exe" | |
| Copy-Item $mrVulkaninfo vulkaninfo.exe -force | |
| if (!$?) { | |
| WriteToLog "Error: UpdateVulkanSysFolder encountered error during copy $mrVulkaninfo vulkaninfo.exe" | |
| setScriptReturnValue(40) | |
| } | |
| # Create the name used in the registry for the SDK associated with $mrVulkanDll. | |
| $major=$script:VulkanDllList[-1].Split('@')[1] | |
| $minor=$script:VulkanDllList[-1].Split('@')[2] | |
| $patch=$script:VulkanDllList[-1].Split('@')[3] | |
| $buildno=$script:VulkanDllList[-1].Split('@')[4] | |
| $prerelease=$script:VulkanDllList[-1].Split('@')[5] | |
| $prebuildno=$script:VulkanDllList[-1].Split('@')[6] | |
| $sdktempname="VulkanSDK"+$major + "." + $minor + "." + $patch + "." + $buildno | |
| if ($prerelease -ne "") { | |
| $sdktempname=$sdktempname + "." + $prerelease | |
| } | |
| if ($prebuildno -ne "") { | |
| $sdktempname=$sdktempname + "." + $prebuildno | |
| } | |
| WriteToLog "sdkname = $sdktempname" | |
| if (!$?) { | |
| WriteToLog "Error: UpdateVulkanSysFolder encountered error generating SDK name" | |
| setScriptReturnValue(50) | |
| } | |
| } | |
| # Return to our previous folder | |
| Pop-Location | |
| if (!$?) { | |
| WriteToLog "Error: UpdateVulkanSysFolder popping location" | |
| setScriptReturnValue(60) | |
| } | |
| # Only update the overall script-scope SDK name if we're told to | |
| if ($writeSdkName -ne 0) { | |
| $script:sdkname = $sdktempname | |
| } | |
| return | |
| } | |
| # We only care about SYSWOW64 if we're targeting a 64-bit OS | |
| if ($ossize -eq 64) { | |
| # Update the SYSWOW64 Vulkan DLLS/EXEs | |
| WriteToLog "Calling UpdateVulkanSysFolder $winfolder\SYSWOW64 0" | |
| UpdateVulkanSysFolder $winfolder\SYSWOW64 0 | |
| if (!$?) { | |
| WriteToLog "Error: Calling UpdateVulkanSysFolder for 64-bit OS" | |
| setScriptReturnValue(70) | |
| } | |
| } | |
| # If this is a 64 bit OS and a 32 bit powershell | |
| if (($ossize -eq 64 ) -and ([IntPtr]::size -eq 4)) { | |
| # Update the SYSTEM32 Vulkan DLLS/EXEs | |
| WriteToLog "Calling UpdateVulkanSysFolder $winfolder\SYSTEM32 1" | |
| UpdateVulkanSysFolder $winfolder\SYSNATIVE 1 | |
| if (!$?) { | |
| WriteToLog "Error: Calling UpdateVulkanSysFolder for all OS" | |
| setScriptReturnValue(80) | |
| } | |
| } else { | |
| # Update the SYSTEM32 Vulkan DLLS/EXEs | |
| WriteToLog "Calling UpdateVulkanSysFolder $winfolder\SYSTEM32 1" | |
| UpdateVulkanSysFolder $winfolder\SYSTEM32 1 | |
| if (!$?) { | |
| WriteToLog "Error: Calling UpdateVulkanSysFolder for all OS" | |
| setScriptReturnValue(81) | |
| } | |
| } | |
| # Create an array of vulkan sdk install dirs | |
| WriteToLog "Creating array of of Vulkan SDK Install dirs" | |
| $mrVulkanDllInstallDir="" | |
| $VulkanSdkDirs=@() | |
| $installSDKRegs = @(Get-ChildItem -Path Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall) | |
| if ($installSDKRegs -ne $null) { | |
| ForEach ($curSDKReg in $installSDKRegs) { | |
| if ($curSDKReg -ne $null) { | |
| $regkey=$curSDKReg -replace ".*\\","" | |
| if ($regkey -match "VulkanSDK") { | |
| # Get the install path from UninstallString | |
| $tmp=Get-ItemProperty -Path Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\$regkey -Name UninstallString | |
| if (!$? -or $tmp -eq $null) { | |
| WriteToLog "Error: Get-ItemProperty failed for Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\$regkey" | |
| $Error.Clear(); | |
| continue; | |
| } | |
| $tmp=$tmp -replace "\\Uninstall.exe.*","" | |
| $tmp=$tmp -replace ".*=.","" | |
| WriteToLog "Adding $tmp to VulkanSDKDirs" | |
| $VulkanSdkDirs+=$tmp | |
| if ($regkey -eq $script:sdkname) { | |
| # Save away the sdk install dir for the the most recent vulkandll | |
| WriteToLog "Setting mrVulkanDllInstallDir to $tmp" | |
| $mrVulkanDllInstallDir=$tmp | |
| } | |
| } | |
| } | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Error: Failed creating array of of Vulkan SDK Install dirs" | |
| setScriptReturnValue(90) | |
| } | |
| # Search list of sdk install dirs for an sdk compatible with $script:sdkname. | |
| # We go backwards through VulkanDllList to generate SDK names, because we want the most recent SDK. | |
| if ($mrVulkanDllInstallDir -eq "" -and $script:VulkanDllList.Length -gt 0) { | |
| WriteToLog "Searching VulkanDllList" | |
| ForEach ($idx in ($script:VulkanDllList.Length-1)..0) { | |
| $tmp=$script:VulkanDllList[$idx] | |
| $vulkanDllMajor=$script:VulkanDllList[$idx].Split('@')[1] | |
| $vulkanDllMinor=$script:VulkanDllList[$idx].Split('@')[2] | |
| $vulkanDllPatch=$script:VulkanDllList[$idx].Split('@')[3] | |
| $vulkanDllBuildno=$script:VulkanDllList[$idx].Split('@')[4] | |
| $vulkanDllPrerelease=$script:VulkanDllList[$idx].Split('@')[5] | |
| $vulkanDllPrebuildno=$script:VulkanDllList[$idx].Split('@')[6] | |
| $regEntry="VulkanSDK"+$vulkanDllMajor+"."+$vulkanDllMinor+"."+$vulkanDllPatch+"."+$vulkanDllBuildno | |
| if ($vulkanDllPrerelease) { | |
| $regEntry=$regEntry+"."+$vulkanDllPrerelease | |
| } | |
| if ($vulkanDllPrebuildno) { | |
| $regEntry=$regEntry+"."+$vulkanDllPrebuildno | |
| } | |
| WriteToLog "Comparing $regEntry" | |
| $rval=Get-ItemProperty -Path HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\$regEntry -ErrorAction SilentlyContinue | |
| if (!$? -or $rval -eq $null) { | |
| WriteToLog "Ignoring $regEntry - corresponding SDK registry entry does not exist" | |
| $Error.Clear(); | |
| continue | |
| } | |
| $instDir=$rval | |
| $instDir=$instDir -replace "\\Uninstall.exe.*","" | |
| $instDir=$instDir -replace ".*=.","" | |
| if ($rval) { | |
| $rval=$rval -replace ".* DisplayVersion=","" | |
| $rval=$rval -replace ";.*","" | |
| $reMajor=$rval.Split('.')[0] | |
| $reMinor=$rval.Split('.')[1] | |
| $rePatch=$rval.Split('.')[2] | |
| if ($reMajor+$reMinor+$rePatch -eq $vulkanDllMajor+$vulkanDllMinor+$vulkanDllPatch) { | |
| WriteToLog "Setting mrVulkanDllInstallDir to $instDir" | |
| $mrVulkanDllInstallDir=$instDir | |
| break | |
| } | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Failed searching VulkanDLLList" | |
| $Error.Clear(); | |
| } | |
| } | |
| # Add C:\Vulkan\SDK\0.9.3 to list of SDK install dirs. | |
| # We do this because there is in a bug in SDK 0.9.3 in which layer | |
| # reg entries were not removed on uninstall. So we'll try to clean up | |
| # and remove them now. | |
| # This works only if 0.9.3 was installed to the default location. | |
| # If it was not installed to the default location, those entries will | |
| # need to be cleaned up manually. | |
| $VulkanSdkDirs+="C:\VulkanSDK\0.9.3" | |
| $VulkanSdkDirs+="$windrive\VulkanSDK\0.9.3" | |
| # Remove layer registry values associated with all installed Vulkan SDKs. | |
| # Note that we remove only those entries created by Vulkan SDKs. If other | |
| # layers were installed that are not from an SDK, we don't mess with them. | |
| WriteToLog "Removing old layer registry values from HKLM\SOFTWARE\Khronos\Vulkan\ExplicitLayers" | |
| $regkeys = @(Get-Item -Path Registry::HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\ExplicitLayers | Select-Object -ExpandProperty Property) | |
| if ($regkeys -ne $null) { | |
| ForEach ($regval in $regkeys) { | |
| if ($regval -ne $null) { | |
| ForEach ($sdkdir in $VulkanSdkDirs) { | |
| if ($regval -like "$sdkdir\*.json") { | |
| Remove-ItemProperty -ErrorAction SilentlyContinue -Path HKLM:\SOFTWARE\Khronos\Vulkan\ExplicitLayers -name $regval | |
| if (!$?) { | |
| WriteToLog "Error: Remove-ItemProperty failed for -Path HKLM:\SOFTWARE\Khronos\Vulkan\ExplicitLayers -name $regval" | |
| } else { | |
| WriteToLog "Removed registry value $regval" | |
| } | |
| } | |
| } | |
| } | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Error: Failed Removing old layer registry values from HKLM\SOFTWARE\Khronos\Vulkan\ExplicitLayers" | |
| setScriptReturnValue(100) | |
| } | |
| # Remove 32-bit layer registry value if we're targeting a 64-bit OS | |
| if ($ossize -eq 64) { | |
| $regkeys = @(Get-Item -Path Registry::HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers | Select-Object -ExpandProperty Property) | |
| if ($regkeys -ne $null) { | |
| ForEach ($regval in $regkeys) { | |
| if ($regval -ne $null) { | |
| ForEach ($sdkdir in $VulkanSdkDirs) { | |
| if ($regval -like "$sdkdir\*.json") { | |
| Remove-ItemProperty -ErrorAction SilentlyContinue -Path HKLM:\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers -name $regval | |
| if (!$?) { | |
| WriteToLog "Error: Remove-ItemProperty failed for -Path HKLM:\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers -name $regval" | |
| } else { | |
| WriteToLog "Removed WOW6432Node registry value $regval" | |
| } | |
| } | |
| } | |
| } | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Error: Failed Removing old layer registry values from HKLM\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers" | |
| setScriptReturnValue(110) | |
| } | |
| } | |
| # Create layer registry values associated with Vulkan SDK from which $mrVulkanDll is from | |
| WriteToLog "Creating new layer registry values" | |
| if ($mrVulkanDllInstallDir -ne "") { | |
| # Create registry keys if they don't exist | |
| if (-not (Test-Path -Path HKLM:\SOFTWARE\Khronos\Vulkan\ExplicitLayers)) { | |
| WriteToLog "Creating new registry key HKLM\SOFTWARE\Khronos\Vulkan\ExplicitLayers" | |
| New-Item -Force -ErrorAction SilentlyContinue -Path HKLM:\SOFTWARE\Khronos\Vulkan\ExplicitLayers | out-null | |
| if (!$?) { | |
| WriteToLog "Error: Failed creating HKLM\SOFTWARE\Khronos\Vulkan\ExplicitLayers" | |
| setScriptReturnValue(120) | |
| } | |
| } | |
| if ($ossize -eq 64) { | |
| if (-not (Test-Path -Path HKLM:\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers)) { | |
| WriteToLog "Creating new registry key HKLM\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers" | |
| New-Item -Force -ErrorAction SilentlyContinue -Path HKLM:\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers | out-null | |
| if (!$?) { | |
| WriteToLog "Error: Failed creating HKLM\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers" | |
| setScriptReturnValue(130) | |
| } | |
| } | |
| } | |
| if ($ossize -eq 64) { | |
| # Create registry values in normal registry location for 64-bit items on a 64-bit OS | |
| Get-ChildItem $mrVulkanDllInstallDir\Bin -Filter VkLayer*json | | |
| ForEach-Object { | |
| WriteToLog "Creating registry value $mrVulkanDllInstallDir\Bin\$_" | |
| New-ItemProperty -Path HKLM:\SOFTWARE\Khronos\Vulkan\ExplicitLayers -Name $mrVulkanDllInstallDir\Bin\$_ -PropertyType DWord -Value 0 | out-null | |
| if (!$?) { | |
| WriteToLog "Error: Failed creating $mrVulkanDllInstallDir\Bin\$_" | |
| setScriptReturnValue(140) | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Error: Failed Get-ChildItem $mrVulkanDllInstallDir\Bin | ForEach-Object " | |
| setScriptReturnValue(150) | |
| } | |
| # Create registry values for the WOW6432Node registry location for 32-bit items on a 64-bit OS | |
| Get-ChildItem $mrVulkanDllInstallDir\Bin32 -Filter VkLayer*json | | |
| ForEach-Object { | |
| WriteToLog "Creating WOW6432Node registry value $mrVulkanDllInstallDir\Bin32\$_" | |
| New-ItemProperty -Path HKLM:\SOFTWARE\WOW6432Node\Khronos\Vulkan\ExplicitLayers -Name $mrVulkanDllInstallDir\Bin32\$_ -PropertyType DWord -Value 0 | out-null | |
| if (!$?) { | |
| WriteToLog "Error: Failed creating $mrVulkanDllInstallDir\Bin32\$_" | |
| setScriptReturnValue(160) | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Error: Failed Get-ChildItem $mrVulkanDllInstallDir\Bin32 | ForEach-Object " | |
| setScriptReturnValue(170) | |
| } | |
| } else { | |
| # Create registry values in normal registry location for 32-bit items on a 32-bit OS | |
| Get-ChildItem $mrVulkanDllInstallDir\Bin32 -Filter VkLayer*json | | |
| ForEach-Object { | |
| WriteToLog "Creating registry value $mrVulkanDllInstallDir\Bin\$_" | |
| New-ItemProperty -Path HKLM:\SOFTWARE\Khronos\Vulkan\ExplicitLayers -Name $mrVulkanDllInstallDir\Bin32\$_ -PropertyType DWord -Value 0 | out-null | |
| if (!$?) { | |
| WriteToLog "Error: Failed creating $mrVulkanDllInstallDir\Bin\$_" | |
| setScriptReturnValue(180) | |
| } | |
| } | |
| if (!$?) { | |
| WriteToLog "Error: Failed Get-ChildItem $mrVulkanDllInstallDir\Bin32 | ForEach-Object " | |
| setScriptReturnValue(190) | |
| } | |
| } | |
| } | |
| # Debug - for testing handling of script failure in installer | |
| #setScriptReturnValue(200) | |
| # Final log output | |
| WriteToLog "ConfigLayersAndVulkanDLL.ps1 completed, return status is $script:scriptReturnValue" | |
| $endTime=Get-Date | |
| WriteToLog "End time: $endTime" | |
| # Since InstallerRT.nsi runs this script by piping it to powershell.exe, the exit status | |
| # doesn't seem to be available. So we put in it a file where InstallRT.nsi can retrieve it. | |
| $statusfile=$Env:Temp+"\ConfigLayersAndVulkanDLL.stat" | |
| echo $script:scriptReturnValue | Out-File -encoding ascii -filepath $statusfile | |
| exit $script:scriptReturnValue |