| *pi_netrw.txt* For Vim version 7.1. Last change: 2007 May 08 |
| |
| ----------------------------------------------------- |
| NETRW REFERENCE MANUAL by Charles E. Campbell, Jr. |
| ----------------------------------------------------- |
| |
| |
| *dav* *http* *network* *Nwrite* *netrw-file* |
| *fetch* *netrw* *Nread* *rcp* *scp* |
| *ftp* *netrw.vim* *Nsource* *rsync* *sftp* |
| |
| ============================================================================== |
| 1. Contents *netrw-contents* |
| |
| 1. Contents.............................................|netrw-contents| |
| 2. Starting With Netrw..................................|netrw-start| |
| 3. Netrw Reference......................................|netrw-ref| |
| CONTROLLING EXTERNAL APPLICATIONS..................|netrw-externapp| |
| READING............................................|netrw-read| |
| WRITING............................................|netrw-write| |
| DIRECTORY LISTING..................................|netrw-dirlist| |
| CHANGING THE USERID AND PASSWORD...................|netrw-chgup| |
| VARIABLES..........................................|netrw-variables| |
| PATHS..............................................|netrw-path| |
| 4. Network-Oriented File Transfer.......................|netrw-xfer| |
| NETRC..............................................|netrw-netrc| |
| PASSWORD...........................................|netrw-passwd| |
| 5. Activation...........................................|netrw-activate| |
| 6. Transparent File Transfer............................|netrw-transparent| |
| 7. Ex Commands..........................................|netrw-ex| |
| 8. Variables and Options................................|netrw-var| |
| 9. Directory Browsing...................................|netrw-browse| {{{1 |
| Maps...............................................|netrw-maps| |
| Exploring..........................................|netrw-explore-cmds| |
| Quick Reference Commands Table.....................|netrw-browse-cmds| |
| Netrw Browser Variables............................|netrw-browse-var| |
| Introduction To Directory Browsing.................|netrw-browse-intro| |
| Netrw Browsing And Option Incompatibilities........|netrw-incompatible| |
| Directory Exploring Commands.......................|netrw-explore| |
| Refreshing The Listing.............................|netrw-ctrl-l| |
| Going Up...........................................|netrw--| |
| Browsing...........................................|netrw-cr| |
| Obtaining A File...................................|netrw-O| |
| Change Listing Style...............................|netrw-i| |
| Making A New Directory.............................|netrw-d| |
| Deleting Files Or Directories......................|netrw-D| |
| Renaming Files Or Directories......................|netrw-move| |
| Hiding Files Or Directories........................|netrw-a| |
| Edit File Or Directory Hiding List.................|netrw-ctrl-h| |
| Browsing With A Horizontally Split Window..........|netrw-o| |
| Browsing With A Vertically Split Window............|netrw-v| |
| Browsing With A New Tab............................|netrw-t| |
| Preview Window.....................................|netrw-p| |
| Selecting Sorting Style............................|netrw-s| |
| Editing The Sorting Sequence.......................|netrw-S| |
| Reversing Sorting Order............................|netrw-r| |
| Changing To A Predecessor Directory................|netrw-u| |
| Changing To A Successor Directory..................|netrw-U| |
| Customizing Browsing With A User Function..........|netrw-x| |
| Making The Browsing Directory The Current Directory|netrw-c| |
| Bookmarking A Directory............................|netrw-mb| |
| Changing To A Bookmarked Directory.................|netrw-gb| |
| Listing Bookmarks And History......................|netrw-q| |
| Improving Directory Browsing.......................|netrw-listhack| }}}1 |
| 10. Problems and Fixes...................................|netrw-problems| |
| 11. Debugging............................................|netrw-debug| |
| 12. History..............................................|netrw-history| |
| 13. Credits..............................................|netrw-credits| |
| |
| The Netrw plugin is generally sourced automatically as it is a |
| |standard-plugin|. That said, to make use of netrw, one must |
| have plugins available which can be done with the following |
| two lines in your <.vimrc>: > |
| |
| set nocp " 'compatible' is not set |
| filetype plugin on " plugins are enabled |
| < |
| You can avoid loading this plugin by setting the "loaded_netrw" variable |
| in your <.vimrc> file: > |
| |
| :let loaded_netrw = 1 |
| |
| {Vi does not have any of this} |
| |
| ============================================================================== |
| 2. Starting With Netrw *netrw-start* |
| |
| Netrw makes reading, writing, and browsing over a network connection easy! |
| First, make sure that you have plugins enabled, so you'll need to have at |
| least the following in your <.vimrc>: (or see |netrw-activate|) > |
| |
| set nocp " 'compatible' is not set |
| filetype plugin on " plugins are enabled |
| < |
| (see |'cp'| and |:filetype-plugin-on|) |
| |
| Netrw supports "transparent" editing of files on other machines using urls |
| (see |netrw-transparent|). As an example of this, let's assume you have an |
| account on some other machine; try > |
| |
| vim scp://hostname/path/to/file |
| < |
| if you have an ssh connection. Want to make ssh/scp easier to use? Check |
| out |netrw-listhack|! |
| |
| What if you have ftp, not ssh/scp? That's easy, too; try > |
| |
| vim ftp://hostname/path/to/file |
| < |
| Want to make ftp simpler to use? See if your ftp supports a file called |
| <.netrc> -- typically it goes in your home directory, has read/write |
| permissions for only the user to read (ie. not group, world, other, etc), |
| and has lines resembling > |
| |
| machine HOSTNAME login USERID password "PASSWORD" |
| machine HOSTNAME login USERID password "PASSWORD" |
| ... |
| default login USERID password "PASSWORD" |
| < |
| Now about browsing -- ie. when you just want to look around before editing a |
| file. For browsing on your current host, just "edit" a directory: > |
| |
| vim . |
| vim /home/userid/path |
| < |
| For browsing on a remote host, "edit" a directory (but make sure that |
| the directory name is followed by a "/"): > |
| |
| vim scp://hostname/ |
| vim ftp://hostname/path/to/dir/ |
| < |
| See |netrw-browse| for more! |
| |
| There's more protocols supported than scp and ftp, too: see the next |
| section, |netrw-externapp|. |
| |
| ============================================================================== |
| 3. Netrw Reference *netrw-ref* |
| |
| CONTROLLING EXTERNAL APPLICATIONS *netrw-externapp* |
| |
| Protocol Variable Default Value |
| -------- ---------------- ------------- |
| dav: *g:netrw_dav_cmd* = "cadaver" |
| fetch: *g:netrw_fetch_cmd* = "fetch -o" if fetch is available |
| ftp: *g:netrw_ftp_cmd* = "ftp" |
| http: *g:netrw_http_cmd* = "curl -o" if curl is available |
| http: g:netrw_http_cmd = "wget -q -O" else if wget is available |
| http: g:netrw_http_cmd = "fetch -o" else if fetch is available |
| rcp: *g:netrw_rcp_cmd* = "rcp" |
| rsync: *g:netrw_rsync_cmd* = "rsync -a" |
| scp: *g:netrw_scp_cmd* = "scp -q" |
| sftp: *g:netrw_sftp_cmd* = "sftp" |
| |
| READING *netrw-read* *netrw-nread* |
| :Nread ? give help |
| :Nread "machine:path" uses rcp |
| :Nread "machine path" uses ftp w/ <.netrc> |
| :Nread "machine id password path" uses ftp |
| :Nread "dav://machine[:port]/path" uses cadaver |
| :Nread "fetch://[user@]machine/path" uses fetch |
| :Nread "ftp://[user@]machine[[:#]port]/path" uses ftp w/ <.netrc> |
| :Nread "http://[user@]machine/path" uses http uses wget |
| :Nread "rcp://[user@]machine/path" uses rcp |
| :Nread "rsync://[user@]machine[:port]/path" uses rsync |
| :Nread "scp://[user@]machine[[:#]port]/path" uses scp |
| :Nread "sftp://[user@]machine/path" uses sftp |
| |
| WRITING *netrw-write* *netrw-nwrite* |
| :Nwrite ? give help |
| :Nwrite "machine:path" uses rcp |
| :Nwrite "machine path" uses ftp w/ <.netrc> |
| :Nwrite "machine id password path" uses ftp |
| :Nwrite "dav://machine[:port]/path" uses cadaver |
| :Nwrite "ftp://[user@]machine[[:#]port]/path" uses ftp w/ <.netrc> |
| :Nwrite "rcp://[user@]machine/path" uses rcp |
| :Nwrite "rsync://[user@]machine[:port]/path" uses rsync |
| :Nwrite "scp://[user@]machine[[:#]port]/path" uses scp |
| :Nwrite "sftp://[user@]machine/path" uses sftp |
| http: not supported! |
| |
| SOURCING *netrw-source* |
| :Nsource ? give help |
| :Nsource "dav://machine[:port]/path" uses cadaver |
| :Nsource "fetch://[user@]machine/path" uses fetch |
| :Nsource "ftp://[user@]machine[[:#]port]/path" uses ftp w/ <.netrc> |
| :Nsource "http://[user@]machine/path" uses http uses wget |
| :Nsource "rcp://[user@]machine/path" uses rcp |
| :Nsource "rsync://[user@]machine[:port]/path" uses rsync |
| :Nsource "scp://[user@]machine[[:#]port]/path" uses scp |
| :Nsource "sftp://[user@]machine/path" uses sftp |
| |
| DIRECTORY LISTING *netrw-dirlist* |
| :Nread [protocol]://[user]@hostname/path/ |
| |
| *netrw-login* *netrw-password* |
| CHANGING USERID AND PASSWORD *netrw-chgup* *netrw-userpass* |
| |
| Attempts to use ftp will prompt you for a user-id and a password. |
| These will be saved in global variables g:netrw_uid and |
| g:netrw_passwd; subsequent uses of ftp will re-use those two items to |
| simplify the further use of ftp. However, if you need to use a |
| different user id and/or password, you'll want to call NetUserPass() |
| first. To work around the need to enter passwords, check if your ftp |
| supports a <.netrc> file in your home directory. Also see |
| |netrw-passwd| (and if you're using ssh/scp hoping to figure out how |
| to not need to use passwords, look at |netrw-listhack|). |
| |
| :NetUserPass [uid [password]] -- prompts as needed |
| :call NetUserPass() -- prompts for uid and password |
| :call NetUserPass("uid") -- prompts for password |
| :call NetUserPass("uid","password") -- sets global uid and password |
| |
| VARIABLES *netrw-variables* |
| |
| (also see: |netrw-browse-var| |netrw-protocol| |netrw-settings| |netrw-var|) |
| |
| *b:netrw_lastfile* last file Network-read/written retained on a per-buffer |
| basis (supports plain :Nw ) |
| |
| *g:netrw_ftp* if it doesn't exist, use default ftp |
| =0 use default ftp (uid password) |
| =1 use alternate ftp method (user uid password) |
| If you're having trouble with ftp, try changing the |
| value of this variable to see if the alternate ftp |
| method works for your setup. |
| |
| *g:netrw_extracmd* default: doesn't exist |
| If this variable exists, then any string it contains |
| will be placed into the commands set to your ftp |
| client. As an example: |
| ="passive" |
| |
| *g:netrw_ftpmode* ="binary" (default) |
| ="ascii" |
| |
| *g:netrw_ignorenetrc* =0 (default for linux, cygwin) |
| =1 If you have a <.netrc> file but it doesn't work and |
| you want it ignored, then set this variable as shown. |
| (default for Windows + cmd.exe) |
| |
| *g:netrw_menu* =0 disable netrw's menu |
| =1 (default) netrw's menu enabled |
| |
| *g:netrw_nogx* if this variable exists, then the "gx" map will not |
| be available (see |netrw-gx|) |
| |
| *g:netrw_uid* (ftp) user-id, retained on a per-session basis |
| *g:netrw_passwd* (ftp) password, retained on a per-session basis |
| |
| *g:netrw_shq* = "'" for Unix/Linux systems (ie. a single quote) |
| = "'" for Windows + cygwin systems (ie. a single quote) |
| = '"' for Windows systems, not using cygwin |
| (ie. a double quote) |
| Controls the quoting character used during scp and ftp |
| commands. |
| |
| *g:netrw_scpport* = "-P" : option to use to set port for scp |
| *g:netrw_sshport* = "-p" : option to use to set port for ssh |
| |
| *g:netrw_use_errorwindow* =1 : messages from netrw will use a separate one |
| line window. This window provides reliable |
| delivery of messages. (default) |
| =0 : messages from netrw will use echoerr ; |
| messages don't always seem to show up this |
| way, but one doesn't have to quit the window. |
| |
| *g:netrw_win95ftp* =1 if using Win95, will remove four trailing blank |
| lines that o/s's ftp "provides" on transfers |
| =0 force normal ftp behavior (no trailing line removal) |
| |
| *g:netrw_cygwin* =1 assume scp under windows is from cygwin. Also |
| permits network browsing to use ls with time and |
| size sorting (default if windows) |
| =0 assume Windows' scp accepts windows-style paths |
| Network browsing uses dir instead of ls |
| This option is ignored if you're using unix |
| |
| *g:netrw_use_nt_rcp* =0 don't use the rcp of WinNT, Win2000 and WinXP |
| =1 use WinNT's rcp in binary mode (default) |
| |
| PATHS *netrw-path* |
| |
| Paths to files are generally user-directory relative for most protocols. |
| It is possible that some protocol will make paths relative to some |
| associated directory, however. |
| > |
| example: vim scp://user@host/somefile |
| example: vim scp://user@host/subdir1/subdir2/somefile |
| < |
| where "somefile" is the "user"'s home directory. If you wish to get a |
| file using root-relative paths, use the full path: |
| > |
| example: vim scp://user@host//somefile |
| example: vim scp://user@host//subdir1/subdir2/somefile |
| < |
| |
| ============================================================================== |
| 4. Network-Oriented File Transfer *netrw-xfer* |
| |
| Network-oriented file transfer under Vim is implemented by a VimL-based script |
| (<netrw.vim>) using plugin techniques. It currently supports both reading and |
| writing across networks using rcp, scp, ftp or ftp+<.netrc>, scp, fetch, |
| dav/cadaver, rsync, or sftp. |
| |
| http is currently supported read-only via use of wget or fetch. |
| |
| <netrw.vim> is a standard plugin which acts as glue between Vim and the |
| various file transfer programs. It uses autocommand events (BufReadCmd, |
| FileReadCmd, BufWriteCmd) to intercept reads/writes with url-like filenames. > |
| |
| ex. vim ftp://hostname/path/to/file |
| < |
| The characters preceding the colon specify the protocol to use; in the |
| example, its ftp. The <netrw.vim> script then formulates a command or a |
| series of commands (typically ftp) which it issues to an external program |
| (ftp, scp, etc) which does the actual file transfer/protocol. Files are read |
| from/written to a temporary file (under Unix/Linux, /tmp/...) which the |
| <netrw.vim> script will clean up. |
| |
| *netrw-putty* *netrw-pscp* *netrw-psftp* |
| One may modify any protocol's implementing external application by setting a |
| variable (ex. scp uses the variable g:netrw_scp_cmd, which is defaulted to |
| "scp -q"). As an example, consider using PuTTY: > |
| |
| let g:netrw_scp_cmd = '"c:\Program Files\PuTTY\pscp.exe" -q -batch' |
| let g:netrw_sftp_cmd= '"c:\Program Files\PuTTY\psftp.exe"' |
| < |
| See |netrw-p8| for more about putty, pscp, psftp, etc. |
| |
| Ftp, an old protocol, seems to be blessed by numerous implementations. |
| Unfortunately, some implementations are noisy (ie., add junk to the end of the |
| file). Thus, concerned users may decide to write a NetReadFixup() function |
| that will clean up after reading with their ftp. Some Unix systems (ie., |
| FreeBSD) provide a utility called "fetch" which uses the ftp protocol but is |
| not noisy and more convenient, actually, for <netrw.vim> to use. |
| Consequently, if "fetch" is executable, it will be used to do reads for |
| ftp://... (and http://...) . See |netrw-var| for more about this. |
| |
| For rcp, scp, sftp, and http, one may use network-oriented file transfers |
| transparently; ie. |
| > |
| vim rcp://[user@]machine/path |
| vim scp://[user@]machine/path |
| < |
| If your ftp supports <.netrc>, then it too can be just as transparently used |
| if the needed triad of machine name, user id, and password are present in |
| that file. Your ftp must be able to use the <.netrc> file on its own, however. |
| > |
| vim ftp://[user@]machine[[:#]portnumber]/path |
| < |
| However, ftp will often need to query the user for the userid and password. |
| The latter will be done "silently"; ie. asterisks will show up instead of |
| the actually-typed-in password. Netrw will retain the userid and password |
| for subsequent read/writes from the most recent transfer so subsequent |
| transfers (read/write) to or from that machine will take place without |
| additional prompting. |
| |
| *netrw-urls* |
| +=================================+============================+============+ |
| | Reading | Writing | Uses | |
| +=================================+============================+============+ |
| | DAV: | | | |
| | dav://host/path | | cadaver | |
| | :Nread dav://host/path | :Nwrite dav://host/path | cadaver | |
| +---------------------------------+----------------------------+------------+ |
| | FETCH: | | | |
| | fetch://[user@]host/path | | | |
| | fetch://[user@]host:http/path | Not Available | fetch | |
| | :Nread fetch://[user@]host/path| | | |
| +---------------------------------+----------------------------+------------+ |
| | FILE: | | | |
| | file:///* | file:///* | | |
| | file://localhost/* | file://localhost/* | | |
| +---------------------------------+----------------------------+------------+ |
| | FTP: (*3) | (*3) | | |
| | ftp://[user@]host/path | ftp://[user@]host/path | ftp (*2) | |
| | :Nread ftp://host/path | :Nwrite ftp://host/path | ftp+.netrc | |
| | :Nread host path | :Nwrite host path | ftp+.netrc | |
| | :Nread host uid pass path | :Nwrite host uid pass path | ftp | |
| +---------------------------------+----------------------------+------------+ |
| | HTTP: wget is executable: (*4) | | | |
| | http://[user@]host/path | Not Available | wget | |
| +---------------------------------+----------------------------+------------+ |
| | HTTP: fetch is executable (*4) | | | |
| | http://[user@]host/path | Not Available | fetch | |
| +---------------------------------+----------------------------+------------+ |
| | RCP: | | | |
| | rcp://[user@]host/path | rcp://[user@]host/path | rcp | |
| +---------------------------------+----------------------------+------------+ |
| | RSYNC: | | | |
| | rsync://[user@]host/path | rsync://[user@]host/path | rsync | |
| | :Nread rsync://host/path | :Nwrite rsync://host/path | rsync | |
| | :Nread rcp://host/path | :Nwrite rcp://host/path | rcp | |
| +---------------------------------+----------------------------+------------+ |
| | SCP: | | | |
| | scp://[user@]host/path | scp://[user@]host/path | scp | |
| | :Nread scp://host/path | :Nwrite scp://host/path | scp (*1) | |
| +---------------------------------+----------------------------+------------+ |
| | SFTP: | | | |
| | sftp://[user@]host/path | sftp://[user@]host/path | sftp | |
| | :Nread sftp://host/path | :Nwrite sftp://host/path | sftp (*1) | |
| +=================================+============================+============+ |
| |
| (*1) For an absolute path use scp://machine//path. |
| |
| (*2) if <.netrc> is present, it is assumed that it will |
| work with your ftp client. Otherwise the script will |
| prompt for user-id and password. |
| |
| (*3) for ftp, "machine" may be machine#port or machine:port |
| if a different port is needed than the standard ftp port |
| |
| (*4) for http:..., if wget is available it will be used. Otherwise, |
| if fetch is available it will be used. |
| |
| Both the :Nread and the :Nwrite ex-commands can accept multiple filenames. |
| |
| |
| NETRC *netrw-netrc* |
| |
| The typical syntax for lines in a <.netrc> file is given as shown below. |
| Ftp under Unix usually supports <.netrc>; ftp under Windows usually doesn't. |
| > |
| machine {full machine name} login {user-id} password "{password}" |
| default login {user-id} password "{password}" |
| |
| Your ftp client must handle the use of <.netrc> on its own, but if the |
| <.netrc> file exists, an ftp transfer will not ask for the user-id or |
| password. |
| |
| Note: |
| Since this file contains passwords, make very sure nobody else can |
| read this file! Most programs will refuse to use a .netrc that is |
| readable for others. Don't forget that the system administrator can |
| still read the file! |
| |
| |
| PASSWORD *netrw-passwd* |
| |
| The script attempts to get passwords for ftp invisibly using |inputsecret()|, |
| a built-in Vim function. See |netrw-uidpass| for how to change the password |
| after one has set it. |
| |
| Unfortunately there doesn't appear to be a way for netrw to feed a password to |
| scp. Thus every transfer via scp will require re-entry of the password. |
| However, |netrw-listhack| can help with this problem. |
| |
| |
| ============================================================================== |
| 5. Activation *netrw-activate* |
| |
| Network-oriented file transfers are available by default whenever Vim's |
| |'nocompatible'| mode is enabled. The <netrw.vim> file resides in your |
| system's vim-plugin directory and is sourced automatically whenever you bring |
| up vim. I suggest that, at a minimum, you have at least the following in your |
| <.vimrc> customization file: > |
| |
| set nocp |
| if version >= 600 |
| filetype plugin indent on |
| endif |
| < |
| |
| ============================================================================== |
| 6. Transparent File Transfer *netrw-transparent* |
| |
| Transparent file transfers occur whenever a regular file read or write |
| (invoked via an |:autocmd| for |BufReadCmd| or |BufWriteCmd| events) is made. |
| Thus one may use files across networks just as simply as if they were local. > |
| |
| vim ftp://[user@]machine/path |
| ... |
| :wq |
| |
| See |netrw-activate| for more on how to encourage your vim to use plugins |
| such as netrw. |
| |
| |
| ============================================================================== |
| 7. Ex Commands *netrw-ex* |
| |
| The usual read/write commands are supported. There are also a few |
| additional commands available. Often you won't need to use Nw or |
| Nread as shown in |netrw-transparent| (ie. simply use > |
| :e url |
| :r url |
| :w url |
| instead, as appropriate) -- see |netrw-urls|. In the explanations |
| below, a {netfile} is an url to a remote file. |
| |
| :[range]Nw Write the specified lines to the current |
| file as specified in b:netrw_lastfile. |
| |
| :[range]Nw {netfile} [{netfile}]... |
| Write the specified lines to the {netfile}. |
| |
| :Nread Read the specified lines into the current |
| buffer from the file specified in |
| b:netrw_lastfile. |
| |
| :Nread {netfile} {netfile}... |
| Read the {netfile} after the current line. |
| |
| :Nsource {netfile} |
| Source the {netfile}. |
| To start up vim using a remote .vimrc, one may use |
| the following (all on one line) (tnx to Antoine Mechelynck) > |
| vim -u NORC -N |
| --cmd "runtime plugin/netrwPlugin.vim" |
| --cmd "source scp://HOSTNAME/.vimrc" |
| < *netrw-uidpass* |
| :call NetUserPass() |
| If b:netrw_uid and b:netrw_passwd don't exist, |
| this function query the user for them. |
| |
| :call NetUserPass("userid") |
| This call will set the b:netrw_uid and, if |
| the password doesn't exist, will query the user for it. |
| |
| :call NetUserPass("userid","passwd") |
| This call will set both the b:netrw_uid and b:netrw_passwd. |
| The user-id and password are used by ftp transfers. One may |
| effectively remove the user-id and password by using "" |
| strings. |
| |
| :NetrwSettings This command is described in |netrw-settings| -- used to |
| display netrw settings and change netrw behavior. |
| |
| |
| ============================================================================== |
| 8. Variables and Options *netrw-options* *netrw-var* |
| |
| The <netrw.vim> script provides several variables which act as options to |
| ffect <netrw.vim>'s behavior. These variables typically may be set in the |
| user's <.vimrc> file: |
| (also see: |
| |netrw-settings| |netrw-browse-var| |netrw-protocol| |netrw-settings|) > |
| |
| ------------- |
| Netrw Options |
| ------------- |
| Option Meaning |
| -------------- ----------------------------------------------- |
| < |
| b:netrw_col Holds current cursor position (during NetWrite) |
| g:netrw_cygwin =1 assume scp under windows is from cygwin |
| (default/windows) |
| =0 assume scp under windows accepts windows |
| style paths (default/else) |
| g:netrw_ftp =0 use default ftp (uid password) |
| g:netrw_ftpmode ="binary" (default) |
| ="ascii" (your choice) |
| g:netrw_ignorenetrc =1 (default) |
| if you have a <.netrc> file but you don't |
| want it used, then set this variable. Its |
| mere existence is enough to cause <.netrc> |
| to be ignored. |
| b:netrw_lastfile Holds latest method/machine/path. |
| b:netrw_line Holds current line number (during NetWrite) |
| g:netrw_passwd Holds current password for ftp. |
| g:netrw_silent =0 transfers done normally |
| =1 transfers done silently |
| g:netrw_uid Holds current user-id for ftp. |
| =1 use alternate ftp (user uid password) |
| (see |netrw-options|) |
| g:netrw_use_nt_rcp =0 don't use WinNT/2K/XP's rcp (default) |
| =1 use WinNT/2K/XP's rcp, binary mode |
| g:netrw_win95ftp =0 use unix-style ftp even if win95/98/ME/etc |
| =1 use default method to do ftp > |
| ----------------------------------------------------------------------- |
| < |
| The script will also make use of the following variables internally, albeit |
| temporarily. |
| > |
| ------------------- |
| Temporary Variables |
| ------------------- |
| Variable Meaning |
| -------- ------------------------------------ |
| < |
| g:netrw_method Index indicating rcp/ftp+.netrc/ftp |
| g:netrw_machine Holds machine name parsed from input |
| g:netrw_fname Holds filename being accessed > |
| ------------------------------------------------------------ |
| < |
| *netrw-protocol* |
| |
| Netrw supports a number of protocols. These protocols are invoked using the |
| variables listed below, and may be modified by the user. |
| > |
| ------------------------ |
| Protocol Control Options |
| ------------------------ |
| Option Type Setting Meaning |
| --------- -------- -------------- --------------------------- |
| < |
| netrw_ftp variable =doesn't exist userid set by "user userid" |
| =0 userid set by "user userid" |
| =1 userid set by "userid" |
| NetReadFixup function =doesn't exist no change |
| =exists Allows user to have files |
| read via ftp automatically |
| transformed however they wish |
| by NetReadFixup() |
| g:netrw_dav_cmd variable ="cadaver" |
| g:netrw_fetch_cmd variable ="fetch -o" if fetch is available |
| g:netrw_ftp_cmd variable ="ftp" |
| g:netrw_http_cmd variable ="fetch -o" if fetch is available |
| g:netrw_http_cmd variable ="wget -O" else if wget is available |
| g:netrw_list_cmd variable ="ssh USEPORT HOSTNAME ls -Fa" |
| g:netrw_rcp_cmd variable ="rcp" |
| g:netrw_rsync_cmd variable ="rsync -a" |
| g:netrw_scp_cmd variable ="scp -q" |
| g:netrw_sftp_cmd variable ="sftp" > |
| ------------------------------------------------------------------------- |
| < |
| *netrw-ftp* |
| |
| The g:netrw_..._cmd options (|g:netrw_ftp_cmd| and |g:netrw_sftp_cmd|) |
| specify the external program to use handle the ftp protocol. They may |
| include command line options (such as -p for passive mode). |
| |
| Browsing is supported by using the |g:netrw_list_cmd|; the substring |
| "HOSTNAME" will be changed via substitution with whatever the current request |
| is for a hostname. |
| |
| Two options (|g:netrw_ftp| and |netrw-fixup|) both help with certain ftp's |
| that give trouble . In order to best understand how to use these options if |
| ftp is giving you troubles, a bit of discussion is provided on how netrw does |
| ftp reads. |
| |
| For ftp, netrw typically builds up lines of one of the following formats in a |
| temporary file: |
| > |
| IF g:netrw_ftp !exists or is not 1 IF g:netrw_ftp exists and is 1 |
| ---------------------------------- ------------------------------ |
| < |
| open machine [port] open machine [port] |
| user userid password userid password |
| [g:netrw_ftpmode] password |
| [g:netrw_extracmd] [g:netrw_ftpmode] |
| get filename tempfile [g:netrw_extracmd] |
| get filename tempfile > |
| --------------------------------------------------------------------- |
| < |
| The |g:netrw_ftpmode| and |g:netrw_extracmd| are optional. |
| |
| Netrw then executes the lines above by use of a filter: |
| > |
| :%! {g:netrw_ftp_cmd} -i [-n] |
| < |
| where |
| g:netrw_ftp_cmd is usually "ftp", |
| -i tells ftp not to be interactive |
| -n means don't use netrc and is used for Method #3 (ftp w/o <.netrc>) |
| |
| If <.netrc> exists it will be used to avoid having to query the user for |
| userid and password. The transferred file is put into a temporary file. |
| The temporary file is then read into the main editing session window that |
| requested it and the temporary file deleted. |
| |
| If your ftp doesn't accept the "user" command and immediately just demands a |
| userid, then try putting "let netrw_ftp=1" in your <.vimrc>. |
| |
| *netrw-cadaver* |
| To handle the SSL certificate dialog for untrusted servers, one may pull |
| down the certificate and place it into /usr/ssl/cert.pem. This operation |
| renders the server treatment as "trusted". |
| |
| *netrw-fixup* *netreadfixup* |
| If your ftp for whatever reason generates unwanted lines (such as AUTH |
| messages) you may write a NetReadFixup(tmpfile) function: |
| > |
| function! NetReadFixup(method,line1,line2) |
| " a:line1: first new line in current file |
| " a:line2: last new line in current file |
| if a:method == 1 "rcp |
| elseif a:method == 2 "ftp + <.netrc> |
| elseif a:method == 3 "ftp + machine,uid,password,filename |
| elseif a:method == 4 "scp |
| elseif a:method == 5 "http/wget |
| elseif a:method == 6 "dav/cadaver |
| elseif a:method == 7 "rsync |
| elseif a:method == 8 "fetch |
| elseif a:method == 9 "sftp |
| else " complain |
| endif |
| endfunction |
| > |
| The NetReadFixup() function will be called if it exists and thus allows you to |
| customize your reading process. As a further example, <netrw.vim> contains |
| just such a function to handle Windows 95 ftp. For whatever reason, Windows |
| 95's ftp dumps four blank lines at the end of a transfer, and so it is |
| desirable to automate their removal. Here's some code taken from <netrw.vim> |
| itself: |
| > |
| if has("win95") && g:netrw_win95ftp |
| fun! NetReadFixup(method, line1, line2) |
| if method == 3 " ftp (no <.netrc>) |
| let fourblanklines= line2 - 3 |
| silent fourblanklines.",".line2."g/^\s*/d" |
| endif |
| endfunction |
| endif |
| > |
| |
| ============================================================================== |
| 9. Directory Browsing *netrw-browse* *netrw-dir* *netrw-list* *netrw-help* |
| |
| MAPS *netrw-maps* |
| <F1>.............Help.......................................|netrw-help| |
| <cr>.............Browsing...................................|netrw-cr| |
| <del>............Deleting Files or Directories..............|netrw-delete| |
| -................Going Up...................................|netrw--| |
| a................Hiding Files or Directories................|netrw-a| |
| mb...............Bookmarking a Directory....................|netrw-mb| |
| gb...............Changing to a Bookmarked Directory.........|netrw-gb| |
| c................Make Browsing Directory The Current Dir....|netrw-c| |
| d................Make A New Directory.......................|netrw-d| |
| D................Deleting Files or Directories..............|netrw-D| |
| <c-h>............Edit File/Directory Hiding List............|netrw-ctrl-h| |
| i................Change Listing Style.......................|netrw-i| |
| <c-l>............Refreshing the Listing.....................|netrw-ctrl-l| |
| o................Browsing with a Horizontal Split...........|netrw-o| |
| p................Preview Window.............................|netrw-p| |
| q................Listing Bookmarks and History..............|netrw-q| |
| r................Reversing Sorting Order....................|netrw-r| |
| R................Renaming Files or Directories..............|netrw-R| |
| s................Selecting Sorting Style....................|netrw-s| |
| S................Editing the Sorting Sequence...............|netrw-S| |
| t................Browsing with a new tab....................|netrw-t| |
| u................Changing to a Predecessor Directory........|netrw-u| |
| U................Changing to a Successor Directory..........|netrw-U| |
| v................Browsing with a Vertical Split.............|netrw-v| |
| x................Customizing Browsing.......................|netrw-x| |
| |
| COMMANDS *netrw-explore-cmds* |
| :Explore[!] [dir] Explore directory of current file........|netrw-explore| |
| :Sexplore[!] [dir] Split & Explore directory ...............|netrw-explore| |
| :Hexplore[!] [dir] Horizontal Split & Explore...............|netrw-explore| |
| :Vexplore[!] [dir] Vertical Split & Explore.................|netrw-explore| |
| :Texplore[!] [dir] Tab & Explore............................|netrw-explore| |
| :Pexplore[!] [dir] Vertical Split & Explore.................|netrw-explore| |
| :Nexplore[!] [dir] Vertical Split & Explore.................|netrw-explore| |
| :NetrwSettings.............................................|netrw-settings| |
| |
| QUICK REFERENCE COMMANDS TABLE *netrw-browse-cmds* |
| > |
| ------- ----------- |
| Command Explanation |
| ------- ----------- |
| < <F1> Causes Netrw to issue help |
| <cr> Netrw will enter the directory or read the file |netrw-cr| |
| <del> Netrw will attempt to remove the file/directory |netrw-del| |
| - Makes Netrw go up one directory |netrw--| |
| a Toggles between normal display, |netrw-a| |
| hiding (suppress display of files matching g:netrw_list_hide) |
| showing (display only files which match g:netrw_list_hide) |
| mb bookmark current directory |
| gb go to previous bookmarked directory |
| c Make current browsing directory the current directory |netrw-c| |
| d Make a directory |netrw-d| |
| D Netrw will attempt to remove the file(s)/directory(ies) |netrw-D| |
| <c-h> Edit file hiding list |netrw-ctrl-h| |
| i Cycle between thin, long, wide, and tree listings|netrw-i| |
| <c-l> Causes Netrw to refresh the directory listing |netrw-ctrl-l| |
| o Enter the file/directory under the cursor in a new browser |
| window. A horizontal split is used. |netrw-o| |
| O Obtain a file specified by cursor |netrw-O| |
| p Preview the file |netrw-p| |
| P Browse in the previously used window |netrw-P| |
| q List bookmarked directories and history |netrw-q| |
| r Reverse sorting order |netrw-r| |
| R Rename the designed file(s)/directory(ies) |netrw-R| |
| s Select sorting style: by name, time, or file size |netrw-s| |
| S Specify suffix priority for name-sorting |netrw-S| |
| t Enter the file/directory under the cursor in a new tab|netrw-t| |
| u Change to recently-visited directory |netrw-u| |
| U Change to subsequently-visited directory |netrw-U| |
| v Enter the file/directory under the cursor in a new browser |
| window. A vertical split is used. |netrw-v| |
| x Apply a function to a file. (special browsers) |netrw-x| |
| |
| NETRW BROWSER VARIABLES *netrw-browse-var* |
| > |
| --- ----------- |
| Var Explanation |
| --- ----------- |
| < *g:netrw_alto* change from above splitting to below splitting |
| by setting this variable (see |netrw-o|) |
| default: =&sb (see |'sb'|) |
| |
| *g:netrw_altv* change from left splitting to right splitting |
| by setting this variable (see |netrw-v|) |
| default: =&spr (see |'spr'|) |
| |
| *g:netrw_browse_split* when browsing, <cr> will open the file by: |
| =0: re-using the same window |
| =1: horizontally splitting the window first |
| =2: vertically splitting the window first |
| =3: open file in new tab |
| |
| *g:netrw_browsex_viewer* specify user's preference for a viewer: > |
| "kfmclient exec" |
| "gnome-open" |
| < If > |
| "-" |
| < is used, then netrwFileHandler() will look for |
| a script/function to handle the given |
| extension. (see |netrw_filehandler|). |
| |
| *g:netrw_fastbrowse* =0: slow speed browsing, never re-use |
| directory listings; always obtain |
| directory listings. |
| =1: medium speed browsing, re-use directory |
| listings only when remote browsing. |
| (default value) |
| =2: fast browsing, only obtains directory |
| listings when the directory hasn't been |
| seen before (or |netrw-ctrl-l| is used). |
| Fast browsing retains old directory listing |
| buffers so that they don't need to be |
| re-acquired. This feature is especially |
| important for remote browsing. However, if |
| a file is introduced or deleted into or from |
| such directories, the old directory buffer |
| becomes out-of-date. One may always refresh |
| such a directory listing with |netrw-ctrl-l|. |
| This option gives the choice of the trade-off |
| between accuracy and speed to the user. |
| |
| *g:netrw_ftp_browse_reject* ftp can produce a number of errors and warnings |
| that can show up as "directories" and "files" |
| in the listing. This pattern is used to |
| remove such embedded messages. By default its |
| value is: |
| '^total\s\+\d\+$\| |
| ^Trying\s\+\d\+.*$\| |
| ^KERBEROS_V\d rejected\| |
| ^Security extensions not\| |
| No such file\| |
| : connect to address [0-9a-fA-F:]* |
| : No route to host$' |
| |
| *g:netrw_ftp_list_cmd* options for passing along to ftp for directory |
| listing. Defaults: |
| unix or g:netrw_cygwin set: : "ls -lF" |
| otherwise "dir" |
| |
| |
| *g:netrw_ftp_sizelist_cmd* options for passing along to ftp for directory |
| listing, sorted by size of file. |
| Defaults: |
| unix or g:netrw_cygwin set: : "ls -slF" |
| otherwise "dir" |
| |
| *g:netrw_ftp_timelist_cmd* options for passing along to ftp for directory |
| listing, sorted by time of last modification. |
| Defaults: |
| unix or g:netrw_cygwin set: : "ls -tlF" |
| otherwise "dir" |
| |
| *g:netrw_hide* if true, the hiding list is used |
| default: =0 |
| |
| *g:netrw_keepdir* =1 (default) keep current directory immune from |
| the browsing directory. |
| =0 keep the current directory the same as the |
| browsing directory. |
| The current browsing directory is contained in |
| b:netrw_curdir (also see |netrw-c|) |
| |
| *g:netrw_list_cmd* command for listing remote directories |
| default: (if ssh is executable) |
| "ssh HOSTNAME ls -FLa" |
| |
| *g:netrw_liststyle* Set the default listing style: |
| = 0: thin listing (one file per line) |
| = 1: long listing (one file per line with time |
| stamp information and file size) |
| = 2: wide listing (multiple files in columns) |
| = 3: tree style listing |
| *g:netrw_list_hide* comma separated pattern list for hiding files |
| default: "" |
| |
| *g:netrw_local_mkdir* command for making a local directory |
| default: "mkdir" |
| |
| *g:netrw_local_rmdir* remove directory command (rmdir) |
| default: "rmdir" |
| |
| *g:netrw_maxfilenamelen* =32 by default, selected so as to make long |
| listings fit on 80 column displays. |
| If your screen is wider, and you have file |
| or directory names longer than 32 bytes, |
| you may set this option to keep listings |
| columnar. |
| |
| *g:netrw_mkdir_cmd* command for making a remote directory |
| default: "ssh USEPORT HOSTNAME mkdir" |
| |
| *g:netrw_rm_cmd* command for removing files |
| default: "ssh USEPORT HOSTNAME rm" |
| |
| *g:netrw_rmdir_cmd* command for removing directories |
| default: "ssh USEPORT HOSTNAME rmdir" |
| |
| *g:netrw_rmf_cmd* command for removing softlinks |
| default: "ssh USEPORT HOSTNAME rm -f" |
| |
| *g:netrw_sort_by* sort by "name", "time", or "size" |
| default: "name" |
| |
| *g:netrw_sort_direction* sorting direction: "normal" or "reverse" |
| default: "normal" |
| |
| *g:netrw_sort_sequence* when sorting by name, first sort by the |
| comma-separated pattern sequence |
| default: '[\/]$,*,\.bak$,\.o$,\.h$, |
| \.info$,\.swp$,\.obj$' |
| |
| *g:netrw_ssh_cmd* One may specify an executable command |
| to use instead of ssh for remote actions |
| such as listing, file removal, etc. |
| default: ssh |
| |
| *g:netrw_ssh_browse_reject* ssh can sometimes produce unwanted lines, |
| messages, banners, and whatnot that one doesn't |
| want masquerading as "directories" and "files". |
| Use this pattern to remove such embedded |
| messages. By default its value is: |
| '^total\s\+\d\+$' |
| |
| *g:netrw_use_noswf* netrw normally avoids writing swapfiles |
| for browser buffers. However, under some |
| systems this apparently is causing nasty |
| ml_get errors to appear; if you're getting |
| ml_get errors, try putting |
| let g:netrw_use_noswf= 0 |
| in your .vimrc. |
| |
| *g:netrw_timefmt* specify format string to strftime() (%c) |
| default: "%c" |
| |
| *g:netrw_winsize* specify initial size of new o/v windows |
| default: "" |
| |
| *g:NetrwTopLvlMenu* This variable specifies the top level |
| menu name; by default, its "Netrw.". If |
| you wish to change this, do so in your |
| .vimrc. |
| |
| INTRODUCTION TO DIRECTORY BROWSING *netrw-browse-intro* |
| |
| Netrw supports the browsing of directories on the local system and on remote |
| hosts, including listing files and directories, entering directories, editing |
| files therein, deleting files/directories, making new directories, and moving |
| (renaming) files and directories. The Netrw browser generally implements the |
| previous explorer maps and commands for remote directories, although details |
| (such as pertinent global variable names) necessarily differ. |
| |
| The Netrw remote file and directory browser handles two protocols: ssh and |
| ftp. The protocol in the url, if it is ftp, will cause netrw to use ftp |
| in its remote browsing. Any other protocol will be used for file transfers, |
| but otherwise the ssh protocol will be used to do remote directory browsing. |
| |
| To use Netrw's remote directory browser, simply attempt to read a "file" with a |
| trailing slash and it will be interpreted as a request to list a directory: |
| |
| vim [protocol]://[user@]hostname/path/ |
| |
| For local directories, the trailing slash is not required. |
| |
| If you'd like to avoid entering the password in for remote directory listings |
| with ssh or scp, see |netrw-listhack|. |
| |
| |
| NETRW BROWSING AND OPTION INCOMPATIBILITIES *netrw-incompatible* |
| |
| Netrw will not work properly with > |
| |
| :set acd |
| :set fo=...ta... |
| < |
| If either of these options are present when browsing is attempted, netrw |
| will change them by using noacd and removing the ta suboptions from the |
| |'formatoptions'|. |
| |
| *netrw-explore* *netrw-pexplore* *netrw-texplore* |
| *netrw-hexplore* *netrw-sexplore* *netrw-nexplore* |
| *netrw-vexplore* |
| DIRECTORY EXPLORING COMMANDS |
| |
| :Explore[!] [dir]... Explore directory of current file *:Explore* |
| :Sexplore[!] [dir]... Split&Explore directory of current file *:Sexplore* |
| :Hexplore[!] [dir]... Horizontal Split & Explore *:Hexplore* |
| :Vexplore[!] [dir]... Vertical Split & Explore *:Vexplore* |
| :Texplore [dir]... Tab & Explore *:Texplore* |
| |
| Used with :Explore **/pattern : (also see |netrw-starstar|) |
| :Nexplore............. go to next matching file *:Nexplore* |
| :Pexplore............. go to previous matching file *:Pexplore* |
| |
| :Explore will open the local-directory browser on the current file's |
| directory (or on directory [dir] if specified). The window will be |
| split only if the file has been modified, otherwise the browsing |
| window will take over that window. Normally the splitting is taken |
| horizontally. |
| :Explore! is like :Explore, but will use vertical splitting. |
| :Sexplore will always split the window before invoking the local-directory |
| browser. As with Explore, the splitting is normally done |
| horizontally. |
| :Sexplore! [dir] is like :Sexplore, but the splitting will be done vertically. |
| :Hexplore [dir] does an :Explore with |:belowright| horizontal splitting. |
| :Hexplore! [dir] does an :Explore with |:aboveleft| horizontal splitting. |
| :Vexplore [dir] does an :Explore with |:leftabove| vertical splitting. |
| :Vexplore! [dir] does an :Explore with |:rightbelow| vertical splitting. |
| :Texplore [dir] does a tabnew before generating the browser window |
| |
| By default, these commands use the current file's directory. However, one |
| may explicitly provide a directory (path) to use. |
| |
| *netrw-starstar* |
| When Explore, Sexplore, Hexplore, or Vexplore are used with a **/filepat, |
| such as: |
| > |
| :Explore **/filename_pattern |
| < |
| netrw will attempt to find a file in the current directory or any subdirectory |
| which matches the filename pattern. Internally, it produces a list of files |
| which match the pattern and their paths; to that extent it resembles the Unix |
| operation: |
| > |
| find $(pwd) -name "$1" -exec "echo" "{}" ";" 2> /dev/null |
| < |
| The directory display is updated to show the subdirectory containing a |
| matching file. One may then proceed to the next (or previous) matching files' |
| directories by using Nexplore or Pexplore, respectively. If your console or |
| gui produces recognizable shift-up or shift-down sequences, then you'll likely |
| find using shift-downarrow and shift-uparrow convenient. They're mapped by |
| netrw: |
| |
| <s-down> == Nexplore, and |
| <s-up> == Pexplore. |
| |
| As an example, consider |
| > |
| :Explore **/*.c |
| :Nexplore |
| :Nexplore |
| :Pexplore |
| < |
| The status line will show, on the right hand side of the status line, a |
| message like "Match 3 of 20". |
| |
| *netrw-starpat* |
| When Explore, Sexplore, Hexplore, or Vexplore are used with a */pattern, |
| such as: |
| > |
| :Explore */pattern |
| < |
| netrw will use |:vimgrep| to find files which contain the given pattern. |
| Like what happens with |netrw-starstar|, a list of files which contain |
| matches to the given pattern is generated. The cursor will then jump |
| to the first file with the given pattern; |:Nexplore|, |:Pexplore|, and |
| the shifted-down and -up arrows work with the list to move to the next |
| or previous files in that list. |
| |
| *netrw-starstarpat* |
| When Explore, Sexplore, Hexplore, or Vexplore are used with a **//pattern, |
| such as: |
| > |
| :Explore **//pattern |
| < |
| then Explore will use |:vimgrep| to find files like |netrw-starpat|; |
| however, Explore will also search subdirectories as well as the current |
| directory. |
| |
| |
| REFRESHING THE LISTING *netrw-ctrl-l* *netrw-ctrl_l* |
| |
| To refresh either a local or remote directory listing, press ctrl-l (<c-l>) or |
| hit the <cr> when atop the ./ directory entry in the listing. One may also |
| refresh a local directory by using ":e .". |
| |
| |
| GOING UP *netrw--* |
| |
| To go up a directory, press "-" or press the <cr> when atop the ../ directory |
| entry in the listing. |
| |
| Netrw will use the command in |g:netrw_list_cmd| to perform the directory |
| listing operation after changing HOSTNAME to the host specified by the |
| user-provided url. By default netrw provides the command as: |
| |
| ssh HOSTNAME ls -FLa |
| |
| where the HOSTNAME becomes the [user@]hostname as requested by the attempt to |
| read. Naturally, the user may override this command with whatever is |
| preferred. The NetList function which implements remote directory browsing |
| expects that directories will be flagged by a trailing slash. |
| |
| |
| BROWSING *netrw-cr* |
| |
| Browsing is simple: move the cursor onto a file or directory of interest. |
| Hitting the <cr> (the return key) will select the file or directory. |
| Directories will themselves be listed, and files will be opened using the |
| protocol given in the original read request. |
| |
| CAVEAT: There are four forms of listing (see |netrw-i|). Netrw assumes |
| that two or more spaces delimit filenames and directory names for the long |
| and wide listing formats. Thus, if your filename or directory name has two |
| or more spaces embedded in it, or any trailing spaces, then you'll need to |
| use the "thin" format to select it. |
| |
| The |g:netrw_browse_split| option, which is zero by default, may be used to |
| cause the opening of files to be done in a new window or tab. When the option |
| is one or two, the splitting will be taken horizontally or vertically, |
| respectively. When the option is set to three, a <cr> will cause the file |
| to appear in a new tab. |
| |
| |
| OBTAINING A FILE *netrw-O* |
| |
| When browsing a remote directory, one may obtain a file under the cursor (ie. |
| get a copy on your local machine, but not edit it) by pressing the O key. |
| Only ftp and scp are supported for this operation (but since these two are |
| available for browsing, that shouldn't be a problem). The status bar |
| will then show, on its right hand side, a message like "Obtaining filename". |
| The statusline will be restored after the transfer is complete. |
| |
| Netrw can also "obtain" a file using the local browser. Netrw's display |
| of a directory is not necessarily the same as Vim's "current directory", |
| unless |g:netrw_keepdir| is set to 0 in the user's <.vimrc>. One may select |
| a file using the local browser (by putting the cursor on it) and pressing |
| "O" will then "obtain" the file; ie. copy it to Vim's current directory. |
| |
| Related topics: |
| * To see what the current directory is, use |:pwd| |
| * To make the currently browsed directory the current directory, see |netrw-c| |
| * To automatically make the currently browsed directory the current |
| directory, see |g:netrw_keepdir|. |
| |
| |
| CHANGE LISTING STYLE *netrw-i* |
| |
| The "i" map cycles between the thin, long, wide, and tree listing formats. |
| |
| The short listing format gives just the files' and directories' names. |
| |
| The long listing is either based on the "ls" command via ssh for remote |
| directories or displays the filename, file size (in bytes), and the time and |
| date of last modification for local directories. With the long listing |
| format, netrw is not able to recognize filenames which have trailing spaces. |
| Use the thin listing format for such files. |
| |
| The wide listing format uses two or more contiguous spaces to delineate |
| filenames; when using that format, netrw won't be able to recognize or use |
| filenames which have two or more contiguous spaces embedded in the name or any |
| trailing spaces. The thin listing format will, however, work with such files. |
| This listing format is the most compact. |
| |
| The tree listing format has a top directory followed by files and directories |
| preceded by a "|". One may open and close directories by pressing the <cr> |
| key while atop the directory name. There is only one tree listing buffer; |
| hence, using "v" or "o" on a subdirectory will only show the same buffer, |
| twice. |
| |
| |
| MAKING A NEW DIRECTORY *netrw-d* |
| |
| With the "d" map one may make a new directory either remotely (which depends |
| on the global variable g:netrw_mkdir_cmd) or locally (which depends on the |
| global variable g:netrw_local_mkdir). Netrw will issue a request for the new |
| directory's name. A bare <CR> at that point will abort the making of the |
| directory. Attempts to make a local directory that already exists (as either |
| a file or a directory) will be detected, reported on, and ignored. |
| |
| |
| DELETING FILES OR DIRECTORIES *netrw-delete* *netrw-D* *netrw-del* |
| |
| Deleting/removing files and directories involves moving the cursor to the |
| file/directory to be deleted and pressing "D". Directories must be empty |
| first before they can be successfully removed. If the directory is a softlink |
| to a directory, then netrw will make two requests to remove the directory |
| before succeeding. Netrw will ask for confirmation before doing the |
| removal(s). You may select a range of lines with the "V" command (visual |
| selection), and then pressing "D". |
| |
| The g:netrw_rm_cmd, g:netrw_rmf_cmd, and g:netrw_rmdir_cmd variables are used |
| to control the attempts to remove files and directories. The g:netrw_rm_cmd |
| is used with files, and its default value is: |
| |
| g:netrw_rm_cmd: ssh HOSTNAME rm |
| |
| The g:netrw_rmdir_cmd variable is used to support the removal of directories. |
| Its default value is: |
| |
| g:netrw_rmdir_cmd: ssh HOSTNAME rmdir |
| |
| If removing a directory fails with g:netrw_rmdir_cmd, netrw then will attempt |
| to remove it again using the g:netrw_rmf_cmd variable. Its default value is: |
| |
| g:netrw_rmf_cmd: ssh HOSTNAME rm -f |
| |
| |
| RENAMING FILES OR DIRECTORIES *netrw-move* *netrw-rename* *netrw-R* |
| |
| Renaming/moving files and directories involves moving the cursor to the |
| file/directory to be moved (renamed) and pressing "R". You will then be |
| queried for where you want the file/directory to be moved. You may select a |
| range of lines with the "V" command (visual selection), and then pressing "R". |
| |
| The g:netrw_rename_cmd variable is used to implement renaming. By default its |
| value is: |
| |
| ssh HOSTNAME mv |
| |
| One may rename a block of files and directories by selecting them with |
| the V (|linewise-visual|). |
| |
| |
| HIDING FILES OR DIRECTORIES *netrw-a* *netrw-hiding* |
| |
| Netrw's browsing facility allows one to use the hiding list in one of three |
| ways: ignore it, hide files which match, and show only those files which |
| match. The "a" map allows the user to cycle about these three ways. |
| |
| The g:netrw_list_hide variable holds a comma delimited list of patterns (ex. |
| \.obj) which specify the hiding list. (also see |netrw-ctrl-h|) To set the |
| hiding list, use the <c-h> map. As an example, to hide files which begin with |
| a ".", one may use the <c-h> map to set the hiding list to '^\..*' (or one may |
| put let g:netrw_list_hide= '^\..*' in one's <.vimrc>). One may then use the |
| "a" key to show all files, hide matching files, or to show only the matching |
| files. |
| |
| Example: ^.*\.[ch] |
| This hiding list command will hide/show all *.c and *.h files. |
| |
| Example: ^.*\.c,^.*\.h |
| This hiding list command will also hide/show all *.c and *.h |
| files. |
| |
| Don't forget to use the "a" map to select the normal/hiding/show mode you want! |
| |
| *netrw-ctrl_h* |
| EDIT FILE OR DIRECTORY HIDING LIST *netrw-ctrl-h* *netrw-edithide* |
| |
| The "<ctrl-h>" map brings up a requestor allowing the user to change the |
| file/directory hiding list. The hiding list consists of one or more patterns |
| delimited by commas. Files and/or directories satisfying these patterns will |
| either be hidden (ie. not shown) or be the only ones displayed (see |
| |netrw-a|). |
| |
| |
| BROWSING WITH A HORIZONTALLY SPLIT WINDOW *netrw-o* *netrw-horiz* |
| |
| Normally one enters a file or directory using the <cr>. However, the "o" map |
| allows one to open a new window to hold the new directory listing or file. A |
| horizontal split is used. (for vertical splitting, see |netrw-v|) |
| |
| Normally, the o key splits the window horizontally with the new window and |
| cursor at the top. To change to splitting the window horizontally with the |
| new window and cursor at the bottom, have |
| |
| let g:netrw_alto = 1 |
| |
| in your <.vimrc>. (also see |netrw-t| |netrw-v| |g:netrw_alto|) |
| |
| There is only one tree listing buffer; using "o" on a displayed subdirectory |
| will split the screen, but the same buffer will be shown twice. |
| |
| |
| BROWSING WITH A VERTICALLY SPLIT WINDOW *netrw-v* |
| |
| Normally one enters a file or directory using the <cr>. However, the "v" map |
| allows one to open a new window to hold the new directory listing or file. A |
| vertical split is used. (for horizontal splitting, see |netrw-o|) |
| |
| Normally, the v key splits the window vertically with the new window and |
| cursor at the left. To change to splitting the window vertically with the new |
| window and cursor at the right, have |
| |
| let g:netrw_altv = 1 |
| |
| in your <.vimrc>. (also see: |netrw-o| |netrw-t| |g:netrw_altv|) |
| |
| There is only one tree listing buffer; using "v" on a displayed subdirectory |
| will split the screen, but the same buffer will be shown twice. |
| |
| |
| BROWSING WITH A NEW TAB *netrw-t* |
| |
| Normally one enters a file or directory using the <cr>. The "t" map |
| allows one to open a new window hold the new directory listing or file in a |
| new tab. (also see: |netrw-o| |netrw-v|) |
| |
| |
| PREVIEW WINDOW *netrw-p* *netrw-preview* |
| |
| One may use a preview window by using the "p" key when the cursor is atop the |
| desired filename to be previewed. |
| |
| |
| PREVIOUS WINDOW *netrw-P* *netrw-prvwin* |
| |
| To edit a file or directory in the previously used window (see :he |CTRL-W_P|), |
| press a "P". If there's only one window, then the one window will be |
| horizontally split (above/below splitting is controlled by |g:netrw_alto|, |
| and its initial size is controlled by |g:netrw_winsize|). |
| |
| If there's more than one window, the previous window will be re-used on |
| the selected file/directory. If the previous window's associated buffer |
| has been modified, and there's only one window with that buffer, then |
| the user will be asked if s/he wishes to save the buffer first (yes, |
| no, or cancel). |
| |
| |
| SELECTING SORTING STYLE *netrw-s* *netrw-sort* |
| |
| One may select the sorting style by name, time, or (file) size. The "s" map |
| allows one to circulate amongst the three choices; the directory listing will |
| automatically be refreshed to reflect the selected style. |
| |
| |
| EDITING THE SORTING SEQUENCE *netrw-S* *netrw-sortsequence* |
| |
| When "Sorted by" is name, one may specify priority via the sorting sequence |
| (g:netrw_sort_sequence). The sorting sequence typically prioritizes the |
| name-listing by suffix, although any pattern will do. Patterns are delimited |
| by commas. The default sorting sequence is: |
| > |
| [\/]$,*,\.bak$,\.o$,\.h$,\.info$,\.swp$,\.obj$ |
| < |
| The lone * is where all filenames not covered by one of the other patterns |
| will end up. One may change the sorting sequence by modifying the |
| g:netrw_sort_sequence variable (either manually or in your <.vimrc>) or by |
| using the "S" map. |
| |
| |
| REVERSING SORTING ORDER *netrw-r* *netrw-reverse* |
| |
| One may toggle between normal and reverse sorting order by pressing the |
| "r" key. |
| |
| |
| CHANGING TO A PREDECESSOR DIRECTORY *netrw-u* *netrw-updir* |
| |
| Every time you change to a new directory (new for the current session), |
| netrw will save the directory in a recently-visited directory history |
| list (unless g:netrw_dirhistmax is zero; by default, its ten). With the |
| "u" map, one can change to an earlier directory (predecessor). To do |
| the opposite, see |netrw-U|. |
| |
| |
| CHANGING TO A SUCCESSOR DIRECTORY *netrw-U* *netrw-downdir* |
| |
| With the "U" map, one can change to a later directory (successor). |
| This map is the opposite of the "u" map. (see |netrw-u|) Use the |
| q map to list both the bookmarks and history. (see |netrw-q|) |
| |
| *netrw-gx* |
| CUSTOMIZING BROWSING WITH A USER FUNCTION *netrw-x* *netrw-handler* |
| (also see |netrw_filehandler|) |
| |
| Certain files, such as html, gif, jpeg, (word/office) doc, etc, files, are |
| best seen with a special handler (ie. a tool provided with your computer). |
| Netrw allows one to invoke such special handlers by: > |
| |
| * when Exploring, hit the "x" key |
| * when editing, hit gx with the cursor atop the special filename |
| < (not available if the |g:netrw_nogx| variable exists) |
| |
| Netrw determines which special handler by the following method: |
| |
| * if |g:netrw_browsex_viewer| exists, then it will be used to attempt to |
| view files. Examples of useful settings (place into your <.vimrc>): > |
| |
| :let g:netrw_browsex_viewer= "kfmclient exec" |
| < or > |
| :let g:netrw_browsex_viewer= "gnome-open" |
| < |
| If g:netrw_browsex_viewer == '-', then netrwFileHandler() will be |
| invoked first (see |netrw_filehandler|). |
| |
| * for Windows 32 or 64, the url and FileProtocolHandler dlls are used. |
| * for Gnome (with gnome-open): gnome-open is used. |
| * for KDE (with kfmclient): kfmclient is used. |
| * otherwise the netrwFileHandler plugin is used. |
| |
| The file's suffix is used by these various approaches to determine an |
| appropriate application to use to "handle" these files. Such things as |
| OpenOffice (*.sfx), visualization (*.jpg, *.gif, etc), and PostScript (*.ps, |
| *.eps) can be handled. |
| |
| *netrw_filehandler* |
| |
| The "x" map applies a function to a file, based on its extension. Of course, |
| the handler function must exist for it to be called! |
| > |
| Ex. mypgm.html x -> |
| NFH_html("scp://user@host/some/path/mypgm.html") |
| < |
| Users may write their own netrw File Handler functions to support more |
| suffixes with special handling. See <plugin/netrwFileHandlers.vim> for |
| examples on how to make file handler functions. As an example: > |
| |
| " NFH_suffix(filename) |
| fun! NFH_suffix(filename) |
| ..do something special with filename.. |
| endfun |
| < |
| These functions need to be defined in some file in your .vim/plugin |
| (vimfiles\plugin) directory. Vim's function names may not have punctuation |
| characters (except for the underscore) in them. To support suffices that |
| contain such characters, netrw will first convert the suffix using the |
| following table: > |
| |
| @ -> AT ! -> EXCLAMATION % -> PERCENT |
| : -> COLON = -> EQUAL ? -> QUESTION |
| , -> COMMA - -> MINUS ; -> SEMICOLON |
| $ -> DOLLAR + -> PLUS ~ -> TILDE |
| < |
| So, for example: > |
| |
| file.rcs,v -> NFH_rcsCOMMAv() |
| < |
| If more such translations are necessary, please send me email: > |
| NdrOchip at ScampbellPfamily.AbizM - NOSPAM |
| with a request. |
| |
| |
| MAKING THE BROWSING DIRECTORY THE CURRENT DIRECTORY *netrw-c* *netrw-curdir* |
| |
| By default, |g:netrw_keepdir| is 1. This setting means that the current |
| directory will not track the browsing directory. |
| |
| Setting g:netrw_keepdir to 0 tells netrw to make vim's current directory to |
| track netrw's browsing directory. |
| |
| However, given the default setting for g:netrw_keepdir of 1 where netrw |
| maintains its own separate notion of the current directory, in order to make |
| the two directories the same, use the "c" map (just type c). That map will |
| set Vim's notion of the current directory to netrw's current browsing |
| directory. |
| |
| |
| BOOKMARKING A DIRECTORY *netrw-mb* *netrw-bookmark* *netrw-bookmarks* |
| One may easily "bookmark" a directory by using > |
| |
| {cnt}mb |
| < |
| Any count may be used. One may use viminfo's "!" option to retain bookmarks |
| between vim sessions. See |netrw-gb| for how to return to a bookmark and |
| |netrw-q| for how to list them. |
| |
| |
| CHANGING TO A BOOKMARKED DIRECTORY *netrw-gb* |
| |
| To change directory back to a bookmarked directory, use |
| |
| {cnt}gb |
| |
| Any count may be used to reference any of the bookmarks. See |netrw-mb| on |
| how to bookmark a directory and |netrw-q| on how to list bookmarks. |
| |
| |
| LISTING BOOKMARKS AND HISTORY *netrw-q* *netrw-listbookmark* |
| |
| Pressing "q" will list the bookmarked directories and directory traversal |
| history (query). (see |netrw-mb|, |netrw-gb|, |netrw-u|, and |netrw-U|) |
| |
| |
| IMPROVING DIRECTORY BROWSING *netrw-listhack* |
| |
| Especially with the remote directory browser, constantly entering the password |
| is tedious. |
| |
| For Linux/Unix systems, the book "Linux Server Hacks - 100 industrial strength |
| tips & tools" by Rob Flickenger (O'Reilly, ISBN 0-596-00461-3) gives a tip |
| for setting up no-password ssh and scp and discusses associated security |
| issues. It used to be available at http://hacks.oreilly.com/pub/h/66 , |
| but apparently that address is now being redirected to some "hackzine". |
| I'll attempt a summary: |
| |
| 1. Generate a public/private key pair on the ssh server: |
| ssh-keygen -t rsa |
| (saving the file in ~/.ssh/id_rsa is ok) |
| 2. Just hit the <CR> when asked for passphrase (twice). |
| 3. This creates two files: |
| ~/.ssh/id_rsa |
| ~/.ssh/id_rsa.pub |
| 4. On the client: |
| cd |
| mkdir .ssh |
| chmod 0700 .ssh |
| scp {serverhostname}:.ssh/id_rsa.pub . |
| cat id_rsa.pub >> .ssh/authorized_keys2 |
| |
| For Windows, folks on the vim mailing list have mentioned that Pageant helps |
| with avoiding the constant need to enter the password. |
| |
| |
| NETRW SETTINGS *netrw-settings* |
| |
| With the NetrwSettings.vim plugin, > |
| :NetrwSettings |
| will bring up a window with the many variables that netrw uses for its |
| settings. You may change any of their values; when you save the file, the |
| settings therein will be used. One may also press "?" on any of the lines for |
| help on what each of the variables do. |
| |
| (also see: |netrw-browse-var| |netrw-protocol| |netrw-var| |netrw-variables|) |
| |
| |
| ============================================================================== |
| 10. Problems and Fixes *netrw-problems* |
| |
| (This section is likely to grow as I get feedback) |
| (also see |netrw-debug|) |
| *netrw-p1* |
| P1. I use windows 95, and my ftp dumps four blank lines at the |
| end of every read. |
| |
| See |netrw-fixup|, and put the following into your |
| <.vimrc> file: |
| |
| let g:netrw_win95ftp= 1 |
| |
| *netrw-p2* |
| P2. I use Windows, and my network browsing with ftp doesn't sort by |
| time or size! -or- The remote system is a Windows server; why |
| don't I get sorts by time or size? |
| |
| Windows' ftp has a minimal support for ls (ie. it doesn't |
| accept sorting options). It doesn't support the -F which |
| gives an explanatory character (ABC/ for "ABC is a directory"). |
| Netrw then uses "dir" to get both its short and long listings. |
| If you think your ftp does support a full-up ls, put the |
| following into your <.vimrc>: > |
| |
| let g:netrw_ftp_list_cmd = "ls -lF" |
| let g:netrw_ftp_timelist_cmd= "ls -tlF" |
| let g:netrw_ftp_sizelist_cmd= "ls -slF" |
| < |
| Alternatively, if you have cygwin on your Windows box, put |
| into your <.vimrc>: > |
| |
| let g:netrw_cygwin= 1 |
| < |
| This problem also occurs when the remote system is Windows. |
| In this situation, the various g:netrw_ftp_[time|size]list_cmds |
| are as shown above, but the remote system will not correctly |
| modify its listing behavior. |
| |
| |
| *netrw-p3* |
| P3. I tried rcp://user@host/ (or protocol other than ftp) and netrw |
| used ssh! That wasn't what I asked for... |
| |
| Netrw has two methods for browsing remote directories: ssh |
| and ftp. Unless you specify ftp specifically, ssh is used. |
| When it comes time to do download a file (not just a directory |
| listing), netrw will use the given protocol to do so. |
| |
| *netrw-p4* |
| P4. I would like long listings to be the default. |
| |
| let g:netrw_liststyle= 1 |
| |
| Check out |netrw-browse-var| for more customizations that |
| you can set. |
| |
| *netrw-p5* |
| P5. My times come up oddly in local browsing |
| |
| Does your system's strftime() accept the "%c" to yield dates |
| such as "Sun Apr 27 11:49:23 1997"? If not, do a "man strftime" |
| and find out what option should be used. Then put it into |
| your <.vimrc>: |
| let g:netrw_timefmt= "%X" (where X is the option) |
| |
| *netrw-p6* |
| P6. I want my current directory to track my browsing. |
| How do I do that? |
| |
| let g:netrw_keepdir= 0 |
| |
| *netrw-p7* |
| P7. I use Chinese (or other non-ascii) characters in my filenames, and |
| netrw (Explore, Sexplore, Hexplore, etc) doesn't display them! |
| |
| (taken from an answer provided by Wu Yongwei on the vim |
| mailing list) |
| I now see the problem. You code page is not 936, right? Vim |
| seems only able to open files with names that are valid in the |
| current code page, as are many other applications that do not |
| use the Unicode version of Windows APIs. This is an OS-related |
| issue. You should not have such problems when the system |
| locale uses UTF-8, such as modern Linux distros. |
| |
| (...it is one more reason to recommend that people use utf-8!) |
| |
| *netrw-p8* |
| P8. I'm getting "ssh is not executable on your system" -- what do I |
| do? |
| |
| (Dudley Fox) Most people I know use putty for windows ssh. It |
| is a free ssh/telnet application. You can read more about it |
| here: |
| |
| http://www.chiark.greenend.org.uk/~sgtatham/putty/ Also: |
| |
| (Marlin Unruh) This program also works for me. It's a single |
| executable, so he/she can copy it into the Windows\System32 |
| folder and create a shortcut to it. |
| |
| (Dudley Fox) You might also wish to consider plink, as it |
| sounds most similar to what you are looking for. plink is an |
| application in the putty suite. |
| |
| http://the.earth.li/~sgtatham/putty/0.58/htmldoc/Chapter7.html#plink |
| |
| (Vissale Neang) Maybe you can try OpenSSH for windows, which |
| can be obtained from: |
| |
| http://sshwindows.sourceforge.net/ |
| |
| It doesn't need the full Cygwin package. |
| |
| (Antoine Mechelynck) For individual Unix-like programs needed |
| for work in a native-Windows environment, I recommend getting |
| them from the GnuWin32 project on sourceforge if it has them: |
| |
| http://gnuwin32.sourceforge.net/ |
| |
| Unlike Cygwin, which sets up a Unix-like virtual machine on |
| top of Windows, GnuWin32 is a rewrite of Unix utilities with |
| Windows system calls, and its programs works quite well in the |
| cmd.exe "Dos box". |
| |
| (dave) Download WinSCP and use that to connect to the server. |
| In Preferences > Editors, set gvim as your editor: |
| |
| - Click "Add..." |
| - Set External Editor (adjust path as needed, include |
| the quotes and !.! at the end): |
| "c:\Program Files\Vim\vim70\gvim.exe" !.! |
| - Check that the filetype in the box below is |
| {asterisk}.{asterisk} (all files), or whatever types |
| you want (cec: change {asterisk} to * ; I had to |
| write it that way because otherwise the helptags |
| system thinks its a tag) |
| - Make sure its at the top of the listbox (click it, |
| then click "Up" if its not) |
| If using the Norton Commander style, you just have to hit <F4> |
| to edit a file in a local copy of gvim. |
| |
| (Vit Gottwald) How to generate public/private key and save |
| public key it on server: > |
| http://www.tartarus.org/~simon/puttydoc/Chapter8.html#pubkey-gettingready |
| 8.3 Getting ready for public key authentication |
| < |
| How to use private key with 'pscp': > |
| http://www.tartarus.org/~simon/puttydoc/Chapter5.html |
| 5.2.4 Using public key authentication with PSCP |
| < |
| (cec) To make proper use of these suggestions above, you will |
| need to modify the following user-settable variables in your |
| .vimrc: |
| |
| |g:netrw_ssh_cmd| |g:netrw_list_cmd| |g:netrw_mkdir_cmd| |
| |g:netrw_rm_cmd| |g:netrw_rmdir_cmd| |g:netrw_rmf_cmd| |
| |
| The first one (|g:netrw_ssh_cmd|) is the most important; most |
| of the others will use the string in g:netrw_ssh_cmd by |
| default. |
| *netrw-p9* *netrw-ml_get* |
| P9. I'm browsing, changing directory, and bang! ml_get errors |
| appear and I have to kill vim. Any way around this? |
| |
| Normally netrw attempts to avoid writing swapfiles for |
| its temporary directory buffers. However, on some systems |
| this attempt appears to be causing ml_get errors to |
| appear. Please try setting |g:netrw_use_noswf| to 0 |
| in your <.vimrc>: > |
| let g:netrw_use_noswf= 0 |
| < |
| |
| ============================================================================== |
| 11. Debugging *netrw-debug* |
| |
| The <netrw.vim> script is typically available as: |
| > |
| /usr/local/share/vim/vim6x/plugin/netrw.vim |
| < -or- > |
| /usr/local/share/vim/vim7x/plugin/netrw.vim |
| < |
| which is loaded automatically at startup (assuming :set nocp). |
| |
| 1. Get the <Decho.vim> script, available as: |
| |
| http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_scripts |
| as "Decho, a vimL debugging aid" |
| or |
| http://vim.sourceforge.net/scripts/script.php?script_id=120 |
| |
| and put it into your local plugin directory. |
| |
| 2. <Decho.vim> itself needs the <cecutil.vim> script, so you'll need |
| to put it into your .vim/plugin, too. You may obtain it from: |
| |
| http://mysite.verizon.net/astronaut/vim/index.html#VimFuncs |
| as "DrC's Utilities" |
| |
| 3. Edit the <netrw.vim> file by typing: |
| |
| vim netrw.vim |
| :DechoOn |
| :wq |
| |
| To restore to normal non-debugging behavior, edit <netrw.vim> |
| by typing |
| |
| vim netrw.vim |
| :DechoOff |
| :wq |
| |
| This command, provided by <Decho.vim>, will comment out all |
| Decho-debugging statements (Dfunc(), Dret(), Decho(), Dredir()). |
| |
| 4. Then bring up vim and attempt a transfer or do browsing. A set of |
| messages should appear concerning the steps that <netrw.vim> took |
| in attempting to read/write your file over the network. |
| |
| To save the file, use > |
| :wincmd j |
| :set bt= |
| :w! DBG |
| < Please send that information to <netrw.vim>'s maintainer, > |
| NdrOchip at ScampbellPfamily.AbizM - NOSPAM |
| < |
| ============================================================================== |
| 12. History *netrw-history* {{{1 |
| |
| v109: Mar 26, 2007 * if a directory name includes a "$" character, |
| Explore() will use expand() in an attempt to |
| decipher the name. |
| May 07, 2007 * g:netrw_use_errorwindow now allows one to |
| have error messages go to a reliable window |
| or to use a less reliable but recallable |
| echoerr method |
| May 07, 2007 * g:netrw_scpport and g:netrw_sshport support |
| use of -P and -p, respectively, to set port |
| for scp/ssh. |
| v108: Jan 03, 2007 * included preview map (|netrw-p|), supporting |
| remote browsing |
| * netrw can now source remote files |
| Jan 26, 2007 * Colton Jamieson noted that remote directory |
| browsing did not support alternate port |
| selection. This feature has now been extended |
| to apply to all remote browsing commands via ssh. |
| (list, remove/delete, rename) |
| Jan 31, 2007 * Luis Florit reported that @* was an invalid |
| register. The @* register is now only saved and |
| restored if |'guioptions'| contains "a". |
| Feb 02, 2007 * Fixed a bug that cropped up when writing files |
| via scp using cygwin |
| Feb 08, 2007 * tree listing mode managed to stop working again; |
| fixed again! |
| Feb 15, 2007 * Guido Van Hoecke reported that netrw didn't |
| handle browsing well with M$ ftp servers. He even |
| set up a temporary account for me to test with |
| (thanks!). Netrw now can browse M$ ftp servers. |
| v107: Oct 12, 2006 * bypassed the autowrite option |
| Oct 24, 2006 * handles automatic decompression of *.gz and *.bz2 |
| files |
| Nov 03, 2006 * Explore will highlight matching files when |
| **/pattern is used (and if the |'hls'| option |
| is set) |
| Nov 09, 2006 * a debugging line, when enabled, was inadvertently |
| bringing up help instead of simply reporting on |
| list contents |
| Nov 21, 2006 * tree listing improved (cursor remains put) |
| Nov 27, 2006 * fixed b:netrw_curdir bug when repeated "i"s were |
| pressed. |
| Dec 15, 2006 * considerable qty of changes, mostly to share more |
| code between local and remote browsing. Includes |
| support for tree-style listing for both remote |
| and local browsing. |
| Dec 15, 2006 * Included Peter Bengtsson's modifications to |
| support the Amiga. |
| v106: Sep 21, 2006 * removed old v:version<700 code as netrw now |
| requires vim 7.0 |
| * worked around a bug where register * was |
| overwritten during local browsing |
| v104: Sep 05, 2006 * as suggested by Rodolfo Borges, :Explore and |
| variants will position the cursor on the file |
| just having been edited |
| * changed default |g:netrw_sort_sequence| order |
| * changed b, Nb to simply mb (see |netrw-mb|) |
| * changed B, NB to simply gb (see |netrw-gb|) |
| * tree listing style (see |g:netrw_liststyle|) |
| * attempts to retain the alternate file |
| v103: Jul 26, 2006 * used Yakov Lerner's tip#1289 to improve netrw |
| error message display |
| * wide listings didn't handle files with backslashes |
| in their names properly. A symptom was an |
| inability to open files. |
| Aug 09, 2006 * included "t" mapping for opening tabbed windows, |
| both for remote and local browsing |
| * changed netrw_longlist to netrw_liststyle |
| Aug 15, 2006 * fixed one of the NB maps |
| Aug 22, 2006 * changed *Explore commands to use -nargs=* instead |
| of -nargs=?. Allows both -complete=dir _and_ the |
| starstar arguments to work (-nargs=? seems to |
| require one or the other). |
| Aug 23, 2006 * copied all w:.. variables across splits to |
| new windows |
| Aug 25, 2006 * when g:netrw_browsex_viewer was '-' |
| (see |g:netrw_browsex_viewer|) it wasn't causing |
| netrwFileHandlers#Invoke() to be called as it |
| was expected to. (tnx Steve Dugaro) |
| Aug 29, 2006 * changed NetBrowseX() to use "setlocal ... noswf" |
| instead of "set ... noswf" (tnx Benji Fisher) |
| Aug 31, 2006 * tabs and fastbrowse<=1 didn't work together. |
| v102: Jun 15, 2006 * chgd netrwPlugin to call netrw#LocalBrowseCheck() |
| * bugfix: g:netrw_keepdir==0 had stopped working |
| Jul 06, 2006 * bugfix: NetOptionSave/Restore now saves/restores |
| the unnamed register (|registers|) |
| Jul 07, 2006 * |g:netrw_menu| support included |
| Jul 13, 2006 * :Texplore command implemented |
| Jul 17, 2006 * NetSplit and (Local|Net)BrowseChgDir() were both |
| splitting windows. This affected o, v, and |
| g:netrw_browse_split. |
| Jul 20, 2006 * works around wildignore setting (was causing |
| netrw's local browser not to list wildignore'd |
| files) |
| Jul 24, 2006 * <leftmouse> acts as a <cr> for selecting a file |
| <rightmouse> acts as a <del> for deleting a file |
| v100: May 14, 2006 * when using Windows and shell==cmd.exe, the |
| default for g:netrw_ignorenetrc is now 1 |
| * bugfix: unwanted ^Ms now removed |
| (affected shell==cmd.exe - Windows) |
| * added Bookmarks and History to the menu |
| * an error message about non-existing |
| w:netrw_longlist was appearing during attempts to |
| Explore (fixed) |
| * g:netrw_shq now available to make netrw use |
| specified style of quotes for commands |
| May 29, 2006 * user NFH_*() functions were inadvertently being |
| ignored |
| * fixed a Windows non-cygwin ftp handling problem. |
| * hiding pattern candidate separators included some |
| characters it shouldn't have (tnx to Osei Poku) |
| Jun 01, 2006 * for browsing, netrw was supposed to use "dir" |
| instead of "ls -lF" when using |
| ftp+non-cygwin+windows. Fixed. |
| * an inadvertently left-in-place debugging statement |
| was preventing use of the "x" key with browsing. |
| Jun 05, 2006 * g:netrw_nogx available to prevent making the gx |
| map (see |g:netrw_nogx|) |
| * bugfix, Explore wouldn't change directory |
| properly (vim ., :Explore subdirname) |
| Jun 06, 2006 * moved history to 2nd line in Netrw menu |
| * fixed delete for unix-based systems |
| Jun 07, 2006 * x key now works for windows-noncygwin-ftp |
| Jun 08, 2006 * Explore */pat and **//pat now wraps |
| v99: May 09, 2006 * g:netrw_browse_split=3 for opening files in new |
| tabs implemented. |
| May 12, 2006 * deletes temporary file at end of NetRead() |
| * visual mode based Obtain implemented |
| * added -complete=dir to the various Explore |
| commands |
| v98: May 02, 2006 * the "p" key didn't work properly when the browsing |
| directory name had spaces in it. |
| v97: May 01, 2006 * exists("&acd") now used to determine if |
| the 'acd' option exists |
| * "obtain" now works again under Windows |
| v96: * bugfix - the |'acd'| option is not always defined but is |
| now bypassed only when it is |
| v95: * bugfix - Hiding mode worked correctly (don't show any file |
| matching any of the g:netrw_hide patterns), but |
| showing mode was showing only those files that didn't |
| match any of the g:netrw_hide patterns. Instead, it now |
| shows all files that match any of the g:netrw_hide patterns |
| (the difference between a logical and and logical or). |
| v94: * bugfix - a Decho() had a missing quote; only affects things |
| when debugging was enabled. |
| v93: * bugfix - removed FocusGained event from causing a slow-browser |
| refresh for Windows |
| v92: * :Explore **//pattern implemented (**/filepattern already taken) |
| v91: * :Explore */pattern implemented |
| * |'acd'| option bypassed |
| v90: * mark ', as suggested by Yegappan Lakshmanan, used to help |
| guarantee entry into the jump list when appropriate. |
| * <s-down> and <s-up> are no longer defined until a |
| :Explore **/pattern is used (if the user already has a map |
| for them). They will be defined for new browser windows |
| from that point forward. |
| v89: * A <s-down>, <s-up>, :Nexplore, or a :Pexplore without having |
| first done an :Explore **/pattern (see |netrw-starstar|) caused |
| a lot of unhelpful error messages to appear |
| v88: * moved DrChip.Netrw menu to Netrw. Now has priority 80 by |
| default. g:NetrwTopLvlMenu == "Netrw" and can be changed |
| by the user to suit. The priority is g:NetrwMenuPriority. |
| * Changed filetype for browser displays from netrwlist to netrw. |
| v87: * bug fix -- menus were partially disappearing |
| v85: * bug fix -- missing an endif |
| * bug fix -- handles spaces in names and directories when using |
| ftp-based browsing |
| v83: * disabled stop-acd handling; the change in directory handling |
| may allow acd to be used again. Awaiting feedback. |
| * D was refusing to delete remote files/directories in wide |
| listing mode. |
| v81: * FocusGained also used to refresh/wipe local browser directory |
| buffers |
| * (bugfix) netrw was leaving [Scratch] buffers behind when the |
| user had the "hidden" option set. The 'hidden' option is |
| now bypassed. |
| v80: * ShellCmdPost event used in conjunction with g:netrw_fastbrowse |
| to refresh/wipe local browser directory buffers. |
| v79: * directories are now displayed with nowrap |
| * (bugfix) if the column width was smaller than the largest |
| file's name, then netrw would hang when using wide-listing |
| mode - fixed |
| * g:netrw_fastbrowse introduced |
| v78: * progress has been made on allowing spaces inside directory |
| names for remote work (reading, writing, browsing). (scp) |
| v77: * Mikolaj Machowski fixed a bug in a substitute command |
| * g:netrw_browsex_viewer implemented |
| * Mikolaj Machowski pointed out that gnome-open is often |
| executable under KDE systems, although it is effectively |
| not functional. NetBrowseX now looks for "kicker" as |
| a running process to determine if KDE is actually the |
| really running. |
| * Explorer's O functionality was inadvertently left out. |
| Netrw now does the same thing, but with the "P" key. |
| * added g:netrw_browse_split option |
| * fixed a bug where the directory contained a "." but |
| the file didn't (was treating the dirname from "." |
| onwards as a suffix) |
| v76: * "directory is missing" error message now restores echo |
| highlighting |
| v75: * file://... now conforms to RFC2396 (thanks to S. Zacchiroli) |
| * if the binary option is set, then NetWrite() will only write |
| the whole file (line numbers don't make sense with this). |
| Supports writing of tar and zip files. |
| v74: * bugfix (vim, then :Explore) now works |
| * ctrl-L keeps cursor at same screen location (both local and |
| remote browsing) |
| * netrw now can read remote zip and tar files |
| * Obtain now uses WinXP ftp+.netrc successfully |
| v73: * bugfix -- scp://host/path/file was getting named incorrectly |
| * netrw detects use of earlier-than-7.0 version of vim and issues |
| a pertinent error message. |
| * netrwSettings.vim is now uses autoloading. Only |
| <netrwPlugin.vim> is needed as a pure plugin |
| (ie. always loaded). |
| v72: * bugfix -- formerly, one could prevent the loading of netrw |
| by "let g:loaded_netrw=1"; when autoloading became supported, |
| this feature was lost. It is now restored. |
| v71: * bugfix -- made some "set nomodifiable"s into setlocal variants |
| (allows :e somenewfile to be modifiable as usual) |
| * NetrwSettings calls a netrw function, thereby assuring that |
| netrw has loaded. However, if netrw does not load for whatever |
| reason, then NetrwSettings will now issue a warning message. |
| * For what reason I don't recall, when wget and fetch are both |
| not present, and an attempt to read a http://... url is made, |
| netrw exited. It now only returns. |
| * When ch=1, on the second and subsequent uses of browsing Netrw |
| would issue a blank line to clear the echo'd messages. This |
| caused an annoying "Hit-Enter" prompt; now a blank line message |
| is echo'd only if &ch>1. |
| v70: * when using |netrw-O|, the "Obtaining filename" message is now |
| shown using |hl-User9|. If User9 has not been defined, netrw |
| will define it. |
| v69: * Bugfix: win95/98 machines were experiencing a |
| "E121: Undefined variable: g:netrw_win95ftp" message |
| v68: * double-click-leftmouse selects word under mouse |
| v67: * Passwords which contain blanks will now be surrounded by |
| double-quotes automatically (Yongwei) |
| v66: * Netrw now seems to work with a few more Windows situations |
| * O now obtains a file: remote browsing file -> local copy, |
| locally browsing file -> current directory (see :pwd) |
| * i now cycles between thin, long, and wide listing styles |
| * NB and Nb are maps that are always available; corresponding |
| B and b maps are only available when not using wide listing |
| in order to allow them to be used for motions |
| v65: * Browser functions now use NetOptionSave/Restore; in particular, |
| netrw now works around the report setting |
| v64: * Bugfix - browsing a "/" directory (Unix) yielded buffers |
| named "[Scratch]" instead of "/" |
| * Bugfix - remote browsing with ftp was omitting the ./ and ../ |
| v63: * netrw now takes advantage of autoload (and requires 7.0) |
| * Bugfix - using r (to reverse sort) working again |
| v62: * Bugfix - spaces allowed again in directory names with |
| g:netrw_keepdir=0. In fact, I've tested netrw (again) |
| with most ANSI punctuation marks for directory names. |
| * Bugfix - NetrwSettings gave errors when g:netrw_silent |
| had not be set. |
| v61: * document upgrade -- netrw variable-based settings all should |
| have tags. Supports NetrwSettings command. |
| * several important variables are window-oriented. Netrw has |
| to transfer these across a window split. See s:BufWinVars() |
| and s:UseBufWinVars(). |
| v60: * when using the i map to switch between long and short listings, |
| netrw will now keep cursor on same line |
| * "Match # of #" now uses status line |
| * :Explore **/*.c will now work from a non-netrw-browser window |
| * :Explore **/patterns can now be run in separate browser windows |
| * active banner (hit <cr> will cause various things to happen) |
| v59: * bugfix -- another keepalt work-around installed (for vim6.3) |
| * "Match # of #" for Explore **/pattern matches |
| v58: * Explore and relatives can now handle **/somefilepattern (v7) |
| * Nexplore and Pexplore introduced (v7). shift-down and shift-up |
| cursor keys will invoke Nexplore and Pexplore, respectively. |
| * bug fixed with o and v |
| * autochdir only worked around for vim when it has been |
| compiled with either |+netbeans_intg| or |+sun_workshop| |
| * Under Windows, all directories and files were being preceded |
| with a "/" when local browsing. Fixed. |
| * When: syntax highlighting is off, laststatus=2, and remote |
| browsing is used, sometimes the laststatus highlighting |
| bleeds into the entire display. Work around - do an extra |
| redraw in that case. |
| * Bugfix: when g:netrw_keepdir=0, due to re-use of buffers, |
| netrw didn't change the directory when it should've |
| * Bugfix: D and R commands work again |
| v57: * Explore and relatives can now handle RO files |
| * reverse sort restored with vim7's sort command |
| * g:netrw_keepdir now being used to keep the current directory |
| unchanged as intended (sense change) |
| * vim 6.3 still supported |
| v56: * LocalBrowse now saves autochdir setting, unsets it, and |
| restores it before returning. |
| * using vim's rename() instead of system + local_rename variable |
| * avoids changing directory when g:netrw_keepdir is false |
| v55: * -bar used with :Explore :Sexplore etc to allow multiple |
| commands to be separated by |s |
| * browser listings now use the "nowrap" option |
| * browser: some unuseful error messages now suppressed |
| v54: * For backwards compatibility, Explore and Sexplore have been |
| implemented. In addition, Hexplore and Vexplore commands |
| are available, too. |
| * <amatch> used instead of <afile> in the transparency |
| support (BufReadCmd, FileReadCmd, FileWriteCmd) |
| * ***netrw*** prepended to various error messages netrw may emit |
| * g:netrw_port used instead of b:netrw_port for scp |
| * any leading [:#] is removed from port numbers |
| v53: * backslashes as well as slashes placed in various patterns |
| (ex. g:netrw_sort_sequence) to better support Windows |
| v52: * nonumber'ing now set for browsing buffers |
| * when the hiding list hid all files, error messages ensued. Fixed |
| * when browsing, swf is set, but directory is not set, when netrw |
| was attempting to restore options, vim wanted to save a swapfile |
| to a local directory using an url-style path. Fixed |
| v51: * cygwin detection now automated (using windows and &shell is bash) |
| * customizable browser "file" rejection patterns |
| * directory history |
| * :[range]w url now supported (ie. netrw has a FileWriteCmd event) |
| * error messages have a "Press <cr> to continue" to allow them |
| to be seen |
| * directory browser displays no longer bother the swapfile |
| * u/U commands to go up and down the history stack |
| * history stack may be saved with viminfo with its "!" option |
| * bugfixes associated with unwanted [No Files] entries |
| v50: * directories now displayed using buftype=nofile; should keep the |
| directory names as-is |
| * attempts to remove empty "[No File]" buffers leftover |
| from :file ..name.. commands |
| * bugfix: a "caps-lock" editing difficulty left in v49 was fixed |
| * syntax highlighting for "Showing:" the hiding list included |
| * bookmarks can now be retained if "!" is in the viminfo option |
| v49: * will use ftp for http://.../ browsing v48: |
| * One may use ftp to do remote host file browsing |
| * (windows and !cygwin) remote browsing with ftp can now use |
| the "dir" command internally to provide listings |
| * g:netrw_keepdir now allows one to keep the initial current |
| directory as the current directory (normally the local file |
| browser makes the currently viewed directory the current |
| directory) |
| * g:netrw_alto and g:netrw_altv now support alternate placement |
| of windows started with o or v |
| * Nread ? and Nwrite ? now uses echomsg (instead of echo) so |
| :messages can repeat showing the help |
| * bugfix: avoids problems with partial matches of directory names |
| to prior buffers with longer names |
| * one can suppress error messages with g:netrw_quiet ctrl-h used |
| * instead of <Leader>h for editing hiding list one may edit the |
| * sorting sequence with the S map now allows confirmation of |
| * deletion with [y(es) n(o) a(ll) q(uit)] the "x" map now handles |
| * special file viewing with: |
| (windows) rundll32 url.dll (gnome) gnome-open (kde) |
| kfmclient If none of these are on the executable path, then |
| netrwFileHandlers.vim is used. |
| * directory bookmarking during both local and remote browsing |
| implemented |
| * one may view all, use the hiding list to suppress, or use the |
| hiding list to show-only remote and local file/directory |
| listings |
| * improved unusual file and directory name handling preview |
| * window support |
| v47: * now handles local directory browsing. |
| v46: * now handles remote directory browsing |
| * g:netrw_silent (if 1) will cause all transfers to be silent |
| v45: * made the [user@]hostname:path form a bit more restrictive to |
| better handle errors in using protocols (e.g. scp:usr@host:file |
| was being recognized as an rcp request) v44: * changed from |
| "rsync -a" to just "rsync" |
| * somehow an editing error messed up the test to recognize |
| use of the fetch method for NetRead. |
| * more debugging statements included |
| v43: * moved "Explanation" comments to <pi_netrw.txt> help file as |
| "Network Reference" (|netrw-ref|) |
| * <netrw.vim> now uses Dfunc() Decho() and Dret() for debugging |
| * removed superfluous NetRestorePosn() calls |
| v42: * now does BufReadPre and BufReadPost events on file:///* and |
| file://localhost/* v41: * installed file:///* and |
| file://localhost/* handling v40: * prevents redraw when a |
| protocol error occurs so that the user may see it v39: * sftp |
| support v38: * Now uses NetRestorePosn() calls with |
| Nread/Nwrite commands |
| * Temporary files now removed via bwipe! instead of bwipe |
| (thanks to Dave Roberts) v37: * Claar's modifications which |
| test if ftp is successful, otherwise give an error message |
| * After a read, the alternate file was pointing to the temp file. |
| The temp file buffer is now wiped out. |
| * removed silent from transfer methods so user can see what's |
| happening |
| |
| |
| ============================================================================== |
| 12. Credits *netrw-credits* {{{1 |
| |
| Vim editor by Bram Moolenaar (Thanks, Bram!) |
| dav support by C Campbell |
| fetch support by Bram Moolenaar and C Campbell |
| ftp support by C Campbell <NdrOchip@ScampbellPfamily.AbizM> |
| http support by Bram Moolenaar <bram@moolenaar.net> |
| rcp |
| rsync support by C Campbell (suggested by Erik Warendorph) |
| scp support by raf <raf@comdyn.com.au> |
| sftp support by C Campbell |
| |
| inputsecret(), BufReadCmd, BufWriteCmd contributed by C Campbell |
| |
| Jérôme Augé -- also using new buffer method with ftp+.netrc |
| Bram Moolenaar -- obviously vim itself, :e and v:cmdarg use, |
| fetch,... |
| Yasuhiro Matsumoto -- pointing out undo+0r problem and a solution |
| Erik Warendorph -- for several suggestions (g:netrw_..._cmd |
| variables, rsync etc) |
| Doug Claar -- modifications to test for success with ftp |
| operation |
| |
| ============================================================================== |
| vim:tw=78:ts=8:ft=help:norl:fdm=marker |