blob: ecb5d0075e7756220cd33c7e903f75345167b388 [file] [log] [blame] [edit]
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* Non-volatile storage routines for verified boot. */
#ifndef VBOOT_REFERENCE_NVSTORAGE_H_
#define VBOOT_REFERENCE_NVSTORAGE_H_
#include <stdint.h>
#define VBNV_BLOCK_SIZE 16 /* Size of NV storage block in bytes */
typedef struct VbNvContext {
/* Raw NV data. Caller must fill this before calling VbNvSetup(). */
uint8_t raw[VBNV_BLOCK_SIZE];
/*
* Flag indicating whether raw data has changed. Set by VbNvTeardown()
* if the raw data has changed and needs to be stored to the underlying
* non-volatile data store.
*/
int raw_changed;
/*
* Internal data for NV storage routines. Caller should not touch
* these fields.
*/
int regenerate_crc;
} VbNvContext;
/* Parameter type for VbNvGet(), VbNvSet(). */
typedef enum VbNvParam {
/*
* Parameter values have been reset to defaults (flag for firmware).
* 0=clear; 1=set.
*/
VBNV_FIRMWARE_SETTINGS_RESET = 0,
/*
* Parameter values have been reset to defaults (flag for kernel).
* 0=clear; 1=set.
*/
VBNV_KERNEL_SETTINGS_RESET,
/* Request debug reset on next S3->S0 transition. 0=clear; 1=set. */
VBNV_DEBUG_RESET_MODE,
/*
* Number of times to try booting RW firmware slot B before slot A.
* Valid range: 0-15.
*
* Vboot2: Number of times to try the firmware in VBNV_FW_TRY_NEXT.
*
* These refer to the same field, but have different enum values so
* case statement don't complain about duplicates.
*/
VBNV_TRY_B_COUNT,
VBNV_FW_TRY_COUNT,
/*
* Request recovery mode on next boot; see VBNB_RECOVERY_* below for
* currently defined reason codes. 8-bit value.
*/
VBNV_RECOVERY_REQUEST,
/*
* Localization index for screen bitmaps displayed by firmware.
* 8-bit value.
*/
VBNV_LOCALIZATION_INDEX,
/* Field reserved for kernel/user-mode use; 32-bit value. */
VBNV_KERNEL_FIELD,
/* Allow booting from USB in developer mode. 0=no, 1=yes. */
VBNV_DEV_BOOT_USB,
/* Allow booting of legacy OSes in developer mode. 0=no, 1=yes. */
VBNV_DEV_BOOT_LEGACY,
/* Only boot Google-signed images in developer mode. 0=no, 1=yes. */
VBNV_DEV_BOOT_SIGNED_ONLY,
/*
* Allow full fastboot capability in firmware in developer mode.
* 0=no, 1=yes.
*/
VBNV_DEV_BOOT_FASTBOOT_FULL_CAP,
/* Set default boot mode (see VbDevDefaultBoot) */
VBNV_DEV_DEFAULT_BOOT,
/*
* Set by userspace to request that RO firmware disable dev-mode on the
* next boot. This is likely only possible if the dev-switch is
* virtual.
*/
VBNV_DISABLE_DEV_REQUEST,
/*
* Set and cleared by vboot to request that the video Option ROM be
* loaded at boot time, so that BIOS screens can be displayed. 0=no,
* 1=yes.
*/
VBNV_OPROM_NEEDED,
/* Request that the firmware clear the TPM owner on the next boot. */
VBNV_CLEAR_TPM_OWNER_REQUEST,
/* Flag that TPM owner was cleared on request. */
VBNV_CLEAR_TPM_OWNER_DONE,
/* TPM requested a reboot */
VBNV_TPM_REQUESTED_REBOOT,
/* More details on recovery reason */
VBNV_RECOVERY_SUBCODE,
/* Request that NVRAM be backed up at next boot if possible. */
VBNV_BACKUP_NVRAM_REQUEST,
/* Vboot2: Firmware slot to try next. 0=A, 1=B */
VBNV_FW_TRY_NEXT,
/* Vboot2: Firmware slot tried this boot (0=A, 1=B) */
VBNV_FW_TRIED,
/* Vboot2: Result of trying that firmware (see vb2_fw_result) */
VBNV_FW_RESULT,
/* Firmware slot tried previous boot (0=A, 1=B) */
VBNV_FW_PREV_TRIED,
/* Result of trying that firmware (see vb2_fw_result) */
VBNV_FW_PREV_RESULT,
/* Wipeout request from firmware present. */
VBNV_FW_REQ_WIPEOUT,
/* Fastboot: Unlock in firmware, 0=disabled, 1=enabled. */
VBNV_FASTBOOT_UNLOCK_IN_FW,
/* Boot system when AC detected (0=no, 1=yes). */
VBNV_BOOT_ON_AC_DETECT,
/* Try to update the EC-RO image (0=no, 1=yes). */
VBNV_TRY_RO_SYNC,
/*
* Finish mode transition (if requested), perform battery cut-off and
* shutdown in next boot.
*/
VBNV_BATTERY_CUTOFF_REQUEST,
/* Maximum kernel version to roll forward to */
VBNV_KERNEL_MAX_ROLLFORWARD,
} VbNvParam;
/* Set default boot in developer mode */
typedef enum VbDevDefaultBoot {
/* Default to boot from disk*/
VBNV_DEV_DEFAULT_BOOT_DISK = 0,
/* Default to boot from USB */
VBNV_DEV_DEFAULT_BOOT_USB = 1,
/* Default to boot legacy OS */
VBNV_DEV_DEFAULT_BOOT_LEGACY = 2,
} VbDevDefaultBoot;
/* Result of trying the firmware in VBNV_FW_TRIED */
typedef enum VbFwResult {
/* Unknown */
VBNV_FW_RESULT_UNKNOWN = 0,
/* Trying a new slot, but haven't reached success/failure */
VBNV_FW_RESULT_TRYING = 1,
/* Successfully booted to the OS */
VBNV_FW_RESULT_SUCCESS = 2,
/* Known failure */
VBNV_FW_RESULT_FAILURE = 3,
} VbFwResult;
/* Recovery reason codes for VBNV_RECOVERY_REQUEST */
/* Recovery not requested. */
#define VBNV_RECOVERY_NOT_REQUESTED 0x00
/*
* Recovery requested from legacy utility. (Prior to the NV storage spec,
* recovery mode was a single bitfield; this value is reserved so that scripts
* which wrote 1 to the recovery field are distinguishable from scripts whch
* use the recovery reasons listed here.
*/
#define VBNV_RECOVERY_LEGACY 0x01
/* User manually requested recovery via recovery button */
#define VBNV_RECOVERY_RO_MANUAL 0x02
/* RW firmware failed signature check (neither RW firmware slot was valid) */
#define VBNV_RECOVERY_RO_INVALID_RW 0x03
/* S3 resume failed */
#define VBNV_RECOVERY_RO_S3_RESUME 0x04
/* TPM error in read-only firmware (deprecated) */
#define VBNV_RECOVERY_DEP_RO_TPM_ERROR 0x05
/* Shared data error in read-only firmware */
#define VBNV_RECOVERY_RO_SHARED_DATA 0x06
/* Test error from S3Resume() */
#define VBNV_RECOVERY_RO_TEST_S3 0x07
/* Test error from LoadFirmwareSetup() */
#define VBNV_RECOVERY_RO_TEST_LFS 0x08
/* Test error from LoadFirmware() */
#define VBNV_RECOVERY_RO_TEST_LF 0x09
/*
* RW firmware failed signature check (neither RW firmware slot was valid).
* Recovery reason is VBNV_RECOVERY_RO_INVALID_RW_CHECK_MIN + the check value
* for the slot which came closest to validating; see VBSD_LF_CHECK_* in
* vboot_struct.h.
*/
#define VBNV_RECOVERY_RO_INVALID_RW_CHECK_MIN 0x10
#define VBNV_RECOVERY_RO_INVALID_RW_CHECK_MAX 0x1F
/*
* Firmware boot failure outside of verified boot (RAM init, missing SSD,
* etc.).
*/
#define VBNV_RECOVERY_RO_FIRMWARE 0x20
/*
* Recovery mode TPM initialization requires a system reboot. The system was
* already in recovery mode for some other reason when this happened.
*/
#define VBNV_RECOVERY_RO_TPM_REBOOT 0x21
/* EC software sync - other error */
#define VBNV_RECOVERY_EC_SOFTWARE_SYNC 0x22
/* EC software sync - unable to determine active EC image */
#define VBNV_RECOVERY_EC_UNKNOWN_IMAGE 0x23
/* EC software sync - error obtaining EC image hash (deprecated) */
#define VBNV_RECOVERY_DEP_EC_HASH 0x24
/* EC software sync - error obtaining expected EC image */
#define VBNV_RECOVERY_EC_EXPECTED_IMAGE 0x25
/* EC software sync - error updating EC */
#define VBNV_RECOVERY_EC_UPDATE 0x26
/* EC software sync - unable to jump to EC-RW */
#define VBNV_RECOVERY_EC_JUMP_RW 0x27
/* EC software sync - unable to protect / unprotect EC-RW */
#define VBNV_RECOVERY_EC_PROTECT 0x28
/* EC software sync - error obtaining expected EC hash */
#define VBNV_RECOVERY_EC_EXPECTED_HASH 0x29
/* EC software sync - expected EC image doesn't match hash */
#define VBNV_RECOVERY_EC_HASH_MISMATCH 0x2A
/* VB2: Secure data inititalization error */
#define VBNV_RECOVERY_VB2_SECDATA_INIT 0x2B
/* VB2: GBB header is bad */
#define VBNV_RECOVERY_VB2_GBB_HEADER 0x2C
/* VB2: Unable to clear TPM owner */
#define VBNV_RECOVERY_VB2_TPM_CLEAR_OWNER 0x2D
/* VB2: Error determining/updating virtual dev switch */
#define VBNV_RECOVERY_VB2_DEV_SWITCH 0x2E
/* VB2: Error determining firmware slot */
#define VBNV_RECOVERY_VB2_FW_SLOT 0x2F
/* Unspecified/unknown error in read-only firmware */
#define VBNV_RECOVERY_RO_UNSPECIFIED 0x3F
/*
* User manually requested recovery by pressing a key at developer
* warning screen
*/
#define VBNV_RECOVERY_RW_DEV_SCREEN 0x41
/* No OS kernel detected */
#define VBNV_RECOVERY_RW_NO_OS 0x42
/* OS kernel failed signature check */
#define VBNV_RECOVERY_RW_INVALID_OS 0x43
/* TPM error in rewritable firmware (deprecated) */
#define VBNV_RECOVERY_DEP_RW_TPM_ERROR 0x44
/* RW firmware in dev mode, but dev switch is off */
#define VBNV_RECOVERY_RW_DEV_MISMATCH 0x45
/* Shared data error in rewritable firmware */
#define VBNV_RECOVERY_RW_SHARED_DATA 0x46
/* Test error from LoadKernel() */
#define VBNV_RECOVERY_RW_TEST_LK 0x47
/* No bootable disk found (deprecated)*/
#define VBNV_RECOVERY_DEP_RW_NO_DISK 0x48
/* Rebooting did not correct TPM_E_FAIL or TPM_E_FAILEDSELFTEST */
#define VBNV_RECOVERY_TPM_E_FAIL 0x49
/* TPM setup error in read-only firmware */
#define VBNV_RECOVERY_RO_TPM_S_ERROR 0x50
/* TPM write error in read-only firmware */
#define VBNV_RECOVERY_RO_TPM_W_ERROR 0x51
/* TPM lock error in read-only firmware */
#define VBNV_RECOVERY_RO_TPM_L_ERROR 0x52
/* TPM update error in read-only firmware */
#define VBNV_RECOVERY_RO_TPM_U_ERROR 0x53
/* TPM read error in rewritable firmware */
#define VBNV_RECOVERY_RW_TPM_R_ERROR 0x54
/* TPM write error in rewritable firmware */
#define VBNV_RECOVERY_RW_TPM_W_ERROR 0x55
/* TPM lock error in rewritable firmware */
#define VBNV_RECOVERY_RW_TPM_L_ERROR 0x56
/* EC software sync unable to get EC image hash */
#define VBNV_RECOVERY_EC_HASH_FAILED 0x57
/* EC software sync invalid image hash size */
#define VBNV_RECOVERY_EC_HASH_SIZE 0x58
/* Unspecified error while trying to load kernel */
#define VBNV_RECOVERY_LK_UNSPECIFIED 0x59
/* No bootable storage device in system */
#define VBNV_RECOVERY_RW_NO_DISK 0x5A
/* No bootable kernel found on disk */
#define VBNV_RECOVERY_RW_NO_KERNEL 0x5B
/* BCB-related error in RW firmware */
#define VBNV_RECOVERY_RW_BCB_ERROR 0x5C
/* Fastboot mode requested in firmware */
#define VBNV_RECOVERY_FW_FASTBOOT 0x5E
/* Recovery hash space lock error in RO firmware */
#define VBNV_RECOVERY_RO_TPM_REC_HASH_L_ERROR 0x5F
/* Unspecified/unknown error in rewritable firmware */
#define VBNV_RECOVERY_RW_UNSPECIFIED 0x7F
/* DM-verity error */
#define VBNV_RECOVERY_KE_DM_VERITY 0x81
/* Unspecified/unknown error in kernel */
#define VBNV_RECOVERY_KE_UNSPECIFIED 0xBF
/* Recovery mode test from user-mode */
#define VBNV_RECOVERY_US_TEST 0xC1
/* Recovery requested by user-mode via BCB */
#define VBNV_RECOVERY_BCB_USER_MODE 0xC2
/* Fastboot mode requested by user-mode */
#define VBNV_RECOVERY_US_FASTBOOT 0xC3
/* User requested recovery for training memory and rebooting. */
#define VBNV_RECOVERY_TRAIN_AND_REBOOT 0xC4
/* Unspecified/unknown error in user-mode */
#define VBNV_RECOVERY_US_UNSPECIFIED 0xFF
/**
* Initialize the NV storage library.
*
* This must be called before any other functions in this library. Returns 0
* if success, non-zero if error.
*
* Proper calling procedure:
* 1) Allocate a context struct.
* 2) If multi-threaded/multi-process, acquire a lock to prevent
* other processes from modifying the underlying storage.
* 3) Read underlying storage and fill in context->raw.
* 4) Call VbNvSetup().
*
* If you have access to global variables, you may want to wrap all that in
* your own VbNvOpen() function. We don't do that in here because there are no
* global variables in UEFI BIOS during the PEI phase (that's also why we have
* to pass around a context pointer).
*/
int VbNvSetup(VbNvContext *context);
/**
* Clean up and flush changes back to the raw data.
*
* This must be called after other functions in this library. Returns 0 if
* success, non-zero if error.
*
* Proper calling procedure:
* 1) Call VbNvExit().
* 2) If context.raw_changed, write data back to underlying storage.
* 3) Release any lock you acquired before calling VbNvSetup().
* 4) Free the context struct.
*
* If you have access to global variables, you may want to wrap this
* in your own VbNvClose() function.
*/
int VbNvTeardown(VbNvContext *context);
/**
* Read a NV storage parameter into *dest.
*
* Returns 0 if success, non-zero if error.
*
* This may only be called between VbNvSetup() and VbNvTeardown().
*/
int VbNvGet(VbNvContext *context, VbNvParam param, uint32_t *dest);
/**
* Set a NV storage param to a new value.
*
* Returns 0 if success, non-zero if error.
*
* This may only be called between VbNvSetup() and VbNvTeardown().
*/
int VbNvSet(VbNvContext *context, VbNvParam param, uint32_t value);
#endif /* VBOOT_REFERENCE_NVSTORAGE_H_ */