| # ------------------------------------------------------------ |
| # SWIG Examples Makefile |
| # |
| # This file is used by the examples to build modules. Assuming |
| # you ran configure, this file will probably work. However, |
| # it's not perfect so you might need to do some hand tweaking. |
| # |
| # Other notes: |
| # |
| # 1. Take a look at the prefixes below. Since SWIG works with |
| # multiple target languages, you may need to find out where |
| # certain packages have been installed. Set the prefixes |
| # accordingly. |
| # |
| # 2. To use this makefile, set required variables, eg SRCS, INTERFACE, |
| # INTERFACEDIR, INCLUDES, LIBS, TARGET, and do a |
| # $(MAKE) -f Makefile.template.in SRCS='$(SRCS)' \ |
| # INCLUDES='$(INCLUDES) LIBS='$(LIBS)' INTERFACE='$(INTERFACE)' \ |
| # INTERFACEDIR='$(INTERFACEDIR)' TARGET='$(TARGET)' method |
| # |
| # 'method' describes what is being built. |
| #--------------------------------------------------------------- |
| |
| TARGET = |
| CC = @CC@ |
| CXX = @CXX@ |
| CFLAGS = @BOOST_CPPFLAGS@ @PLATFLAGS@ |
| prefix = @prefix@ |
| exec_prefix= @exec_prefix@ |
| SRCS = |
| INCLUDES = |
| LIBS = |
| INTERFACE = |
| INTERFACEDIR = |
| INTERFACEPATH = $(INTERFACEDIR)$(INTERFACE) |
| SWIGOPT = |
| SWIG = swig |
| |
| LIBM = @LIBM@ |
| LIBC = @LIBC@ |
| LIBCRYPT = @LIBCRYPT@ |
| SYSLIBS = $(LIBM) $(LIBC) $(LIBCRYPT) |
| LIBPREFIX = |
| |
| # RUNTOOL is for use with runtime tools, eg set it to valgrind |
| RUNTOOL = |
| # COMPILETOOL is a way to run the compiler under another tool, or more commonly just to stop the compiler executing |
| COMPILETOOL= |
| # RUNPIPE is for piping output of running interpreter/compiled code somewhere, eg RUNPIPE=\>/dev/null |
| RUNPIPE= |
| |
| RUNME = runme |
| |
| # X11 options |
| |
| XLIB = @XLIBSW@ |
| XINCLUDE = @XINCLUDES@ |
| |
| IWRAP = $(INTERFACE:.i=_wrap.i) |
| ISRCS = $(IWRAP:.i=.c) |
| ICXXSRCS = $(IWRAP:.i=.cxx) |
| IOBJS = $(IWRAP:.i=.@OBJEXT@) |
| |
| ################################################################## |
| # Some options for silent output |
| ################################################################## |
| |
| ifneq (,$(findstring s, $(filter-out --%, $(MAKEFLAGS)))) |
| # make -s detected |
| SILENT=1 |
| else |
| SILENT= |
| endif |
| |
| ifneq (,$(SILENT)) |
| SILENT_OPTION = -s |
| SILENT_PIPE = >/dev/null |
| ANT_QUIET = -q -logfile /dev/null |
| else |
| SILENT_OPTION = |
| SILENT_PIPE = |
| ANT_QUIET = |
| endif |
| |
| ################################################################## |
| # Dynamic loading for C++ |
| # If you are going to be building dynamic loadable modules in C++, |
| # you may need to edit this line appropriately. |
| # |
| # This line works for g++, but I'm not sure what it might be |
| # for other C++ compilers |
| ################################################################## |
| |
| CPP_DLLIBS = #-L/usr/local/lib/gcc-lib/sparc-sun-solaris2.5.1/2.7.2 \ |
| -L/usr/local/lib -lg++ -lstdc++ -lgcc |
| |
| # Solaris workshop 5.0 |
| # CPP_DLLIBS = -L/opt/SUNWspro/lib -lCrun |
| |
| # Symbols used for using shared libraries |
| SO= @SO@ |
| LDSHARED= @LDSHARED@ |
| CCSHARED= @CCSHARED@ |
| CXXSHARED= @CXXSHARED@ |
| |
| # This is used for building shared libraries with a number of C++ |
| # compilers. If it doesn't work, comment it out. |
| @TRYLINKINGWITHCXX@ |
| |
| OBJS = $(SRCS:.c=.@OBJEXT@) $(CXXSRCS:.cxx=.@OBJEXT@) |
| |
| distclean: |
| rm -f Makefile |
| rm -f xml/Makefile |
| |
| ################################################################## |
| ##### Tcl/Tk ###### |
| ################################################################## |
| |
| # Set these to your local copy of Tcl/Tk. |
| |
| TCLSH = tclsh |
| TCL_INCLUDE = @TCLINCLUDE@ |
| TCL_LIB = @TCLLIB@ |
| TCL_OPTS = @LIBS@ |
| TK_OPTS = -ltk -ltcl @LIBS@ |
| |
| # Extra Tcl specific dynamic linking options |
| TCL_DLNK = @TCLDYNAMICLINKING@ |
| TCL_SO = @TCL_SO@ |
| TCLLDSHARED = @TCLLDSHARED@ |
| TCLCXXSHARED = @TCLCXXSHARED@ |
| TCL_SCRIPT = $(RUNME).tcl |
| |
| # ----------------------------------------------------------- |
| # Build a new version of the tclsh shell |
| # ----------------------------------------------------------- |
| |
| |
| tclsh: $(SRCS) |
| $(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) $(TCL_INCLUDE) \ |
| $(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET) |
| |
| tclsh_cpp: $(SRCS) |
| $(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(TCL_INCLUDE) \ |
| $(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET) |
| |
| # ----------------------------------------------------------- |
| # Build a new copy of wish |
| # ----------------------------------------------------------- |
| |
| wish: $(SRCS) |
| $(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -lwish.i $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) $(TCL_INCLUDE) \ |
| $(XINCLUDE) $(TCL_LIB) $(TK_OPTS) $(XLIB) $(LIBS) $(SYSLIBS) -o $(TARGET) |
| |
| |
| wish_cpp: $(SRCS) |
| $(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -lwish.i $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(TCL_INCLUDE) \ |
| $(XINCLUDE) $(TCL_LIB) $(TK_OPTS) $(XLIB) $(LIBS) $(SYSLIBS) -o $(TARGET) |
| |
| # ----------------------------------------------------------- |
| # Build a Tcl dynamic loadable module (you might need to tweak this) |
| # ----------------------------------------------------------- |
| |
| tcl: $(SRCS) |
| $(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) $(TCL_INCLUDE) |
| $(TCLLDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(TCL_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(TCL_SO) |
| |
| # ----------------------------------------------------------- |
| # Build a Tcl7.5 dynamic loadable module for C++ |
| # ----------------------------------------------------------- |
| |
| tcl_cpp: $(SRCS) |
| $(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(TCL_INCLUDE) |
| $(TCLCXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(TCL_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(TCL_SO) |
| |
| # ----------------------------------------------------------------- |
| # Run Tcl example |
| # ----------------------------------------------------------------- |
| |
| tcl_run: |
| $(RUNTOOL) $(TCLSH) $(TCL_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| tcl_version: |
| echo 'puts $$tcl_version;exit 0' | $(TCLSH) |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Tcl examples |
| # ----------------------------------------------------------------- |
| |
| tcl_clean: |
| rm -f *_wrap* *~ .~* mytclsh@EXEEXT@ |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### PERL 5 ###### |
| ################################################################## |
| |
| # You need to set this variable to the Perl5 directory containing the |
| # files "perl.h", "EXTERN.h" and "XSUB.h". With Perl5.003, it's |
| # usually something like /usr/local/lib/perl5/arch-osname/5.003/CORE. |
| |
| PERL5_INCLUDE= @PERL5EXT@ |
| |
| # Extra Perl specific dynamic linking options |
| PERL5_DLNK = @PERL5DYNAMICLINKING@ |
| PERL5_CCFLAGS = @PERL5CCFLAGS@ |
| PERL5_CCDLFLAGS = @PERL5CCDLFLAGS@ |
| PERL5_CCCDLFLAGS = @PERL5CCCDLFLAGS@ |
| PERL5_LDFLAGS = @PERL5LDFLAGS@ |
| PERL = @PERL@ |
| PERL5_LIB = -L$(PERL5_INCLUDE) -l@PERL5LIB@ @LIBS@ $(SYSLIBS) |
| PERL5_SCRIPT = $(RUNME).pl |
| |
| # ---------------------------------------------------------------- |
| # Build a Perl5 dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| perl5: $(SRCS) |
| $(SWIG) -perl5 $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c -Dbool=char $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) $(PERL5_CCFLAGS) $(PERL5_CCCDLFLAGS) -I$(PERL5_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(PERL5_CCDLFLAGS) $(OBJS) $(IOBJS) $(PERL5_LDFLAGS) $(PERL5_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ---------------------------------------------------------------- |
| # Build a Perl5 dynamically loadable module (C++) |
| # ---------------------------------------------------------------- |
| |
| perl5_cpp: $(SRCS) |
| $(SWIG) -perl5 -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(PERL5_CCFLAGS) $(PERL5_CCCDLFLAGS) -I$(PERL5_INCLUDE) |
| $(CXXSHARED) $(CFLAGS) $(PERL5_CCDLFLAGS) $(OBJS) $(IOBJS) $(PERL5_LDFLAGS) $(PERL5_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ---------------------------------------------------------------- |
| # Build a module from existing XS C source code. (ie. from xsubpp). |
| # ---------------------------------------------------------------- |
| perl5_xs: $(SRCS) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(INCLUDES) -I$(PERL5_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(LIBS) -o $(TARGET)$(SO) |
| |
| # ---------------------------------------------------------------- |
| # Build a statically linked Perl5 executable |
| # ---------------------------------------------------------------- |
| |
| perl5_static: $(SRCS) |
| $(SWIG) -perl5 -static -lperlmain.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) -Dbool=char $(SRCS) $(ISRCS) $(INCLUDES) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET) |
| |
| perl5_static_cpp: $(SRCS) |
| $(SWIG) -perl5 -c++ -static -lperlmain.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Running a Perl5 example |
| # ----------------------------------------------------------------- |
| |
| perl5_run: |
| $(RUNTOOL) $(PERL) $(PERL5_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| perl5_version: |
| $(PERL) -v | grep "This is" |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Perl5 examples |
| # ----------------------------------------------------------------- |
| |
| perl5_clean: |
| rm -f *_wrap* *~ .~* myperl@EXEEXT@ *.pm |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### PYTHON ###### |
| ################################################################## |
| |
| # Make sure these locate your Python installation |
| ifeq (,$(PY3)) |
| PYTHON_INCLUDE= $(DEFS) @PYINCLUDE@ |
| PYTHON_LIB = @PYLIB@ |
| PYTHON = @PYTHON@ |
| else |
| PYTHON_INCLUDE= $(DEFS) @PY3INCLUDE@ |
| PYTHON_LIB = @PY3LIB@ |
| PYTHON = @PYTHON3@ |
| endif |
| |
| # Extra Python specific linking options |
| ifeq (,$(PY3)) |
| PYTHON_DLNK = @PYTHONDYNAMICLINKING@ |
| PYTHON_LINK = @PYLINK@ |
| else |
| PYTHON_DLNK = @PYTHON3DYNAMICLINKING@ |
| PYTHON_LINK = @PY3LINK@ |
| endif |
| PYTHON_SO = @PYTHON_SO@ |
| |
| # SWIG option for Python |
| ifeq (,$(PY3)) |
| SWIGPYTHON = $(SWIG) -python |
| else |
| SWIGPYTHON = $(SWIG) -python -py3 |
| endif |
| |
| # ---------------------------------------------------------------- |
| # Build a C dynamically loadable module |
| # ---------------------------------------------------------------- |
| |
| python: $(SRCS) |
| $(SWIGPYTHON) $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDES) $(PYTHON_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) -o $(LIBPREFIX)_$(TARGET)$(PYTHON_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build a C++ dynamically loadable module |
| # ----------------------------------------------------------------- |
| |
| python_cpp: $(SRCS) |
| $(SWIGPYTHON) -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) $(PYTHON_INCLUDE) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)_$(TARGET)$(PYTHON_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build statically linked Python interpreter |
| # |
| # These should only be used in conjunction with the %include embed.i |
| # library file |
| # ----------------------------------------------------------------- |
| |
| #TKINTER = -L/usr/X11R6.3/lib -L/usr/local/compat/lib -ltk4.0 -ltcl7.4 -lX11 |
| TKINTER = |
| PYTHON_LIBOPTS = $(PYTHON_LINK) @LIBS@ $(TKINTER) $(SYSLIBS) |
| |
| python_static: $(SRCS) |
| $(SWIGPYTHON) -lembed.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) @LINKFORSHARED@ $(ISRCS) $(SRCS) $(INCLUDES) \ |
| $(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET) |
| |
| python_static_cpp: $(SRCS) |
| $(SWIGPYTHON) -c++ -lembed.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) \ |
| $(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Running a Python example |
| # ----------------------------------------------------------------- |
| |
| ifeq (,$(PY3)) |
| PYSCRIPT = $(RUNME).py |
| else |
| PYSCRIPT = $(RUNME)3.py |
| endif |
| |
| PY2TO3 = 2to3 `2to3 -l | grep -v -E "Available|import$$" | awk '{print "-f "$$0}'` |
| |
| python_run: $(PYSCRIPT) |
| $(RUNTOOL) $(PYTHON) $(PYSCRIPT) $(RUNPIPE) |
| |
| $(RUNME)3.py: $(RUNME).py |
| cp $< $@ |
| $(PY2TO3) -w $@ >/dev/null 2>&1 |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| python_version: |
| $(PYTHON) -V |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the python examples |
| # ----------------------------------------------------------------- |
| |
| python_clean: |
| rm -rf __pycache__ |
| rm -f *_wrap* *~ .~* mypython@EXEEXT@ *.pyc |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ *@PYTHON_SO@ |
| rm -f $(TARGET).py |
| if [ -f $(RUNME).py ]; then rm -f $(RUNME)3.py $(RUNME)3.py.bak; fi |
| |
| |
| ################################################################## |
| ##### OCTAVE ###### |
| ################################################################## |
| |
| # Make sure these locate your Octave installation |
| OCTAVE = OCTAVE_HISTFILE=/dev/null @OCTAVE@ |
| OCTAVE_CXX = $(DEFS) @OCTAVE_CPPFLAGS@ @OCTAVE_CXXFLAGS@ |
| |
| # Extra Octave specific dynamic linking options |
| OCTAVE_DLNK = @OCTAVE_LDFLAGS@ |
| OCTAVE_SO = @OCTAVE_SO@ |
| |
| OCTAVE_SCRIPT = $(RUNME).m |
| |
| # ---------------------------------------------------------------- |
| # Build a C dynamically loadable module |
| # Note: Octave requires C++ compiler when compiling C wrappers |
| # ---------------------------------------------------------------- |
| |
| octave: $(SRCS) |
| $(SWIG) -octave $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -g -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(INCLUDES) $(OCTAVE_CXX) |
| $(CC) -g -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CSRCS) $(INCLUDES) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(OCTAVE_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(OCTAVE_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build a C++ dynamically loadable module |
| # ----------------------------------------------------------------- |
| |
| octave_cpp: $(SRCS) |
| $(SWIG) -c++ -octave $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -g -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) $(OCTAVE_CXX) |
| $(CXXSHARED) -g $(CFLAGS) $(OBJS) $(IOBJS) $(OCTAVE_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(OCTAVE_SO) |
| |
| # ----------------------------------------------------------------- |
| # Running an Octave example |
| # ----------------------------------------------------------------- |
| |
| octave_run: |
| $(RUNTOOL) $(OCTAVE) $(OCTAVE_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| octave_version: |
| $(OCTAVE) --version | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Octave examples |
| # ----------------------------------------------------------------- |
| |
| octave_clean: |
| rm -rf __pycache__ |
| rm -f *_wrap* *~ .~* myoctave@EXEEXT@ *.pyc |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ *@OCTAVE_SO@ |
| |
| ################################################################## |
| ##### GUILE ###### |
| ################################################################## |
| |
| # Make sure these locate your Guile installation |
| GUILE = @GUILE@ |
| GUILE_CFLAGS = @GUILE_CFLAGS@ |
| GUILE_SO = @GUILE_SO@ |
| GUILE_LIBS = @GUILE_LIBS@ |
| GUILE_LIBOPTS = @LIBS@ $(SYSLIBS) |
| GUILE_LIBPREFIX = lib |
| GUILE_SCRIPT = $(RUNME).scm |
| |
| #------------------------------------------------------------------ |
| # Build a dynamically loaded module with passive linkage |
| #------------------------------------------------------------------ |
| guile: $(SRCS) |
| $(SWIG) -guile -Linkage passive $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDES) $(GUILE_CFLAGS) $(ISRCS) $(SRCS) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(GUILE_LIBS) $(LIBS) -o $(GUILE_LIBPREFIX)$(TARGET)$(GUILE_SO) |
| |
| guile_cpp: $(GUILE_LIBPREFIX)$(TARGET)$(GUILE_SO) |
| $(GUILE_LIBPREFIX)$(TARGET)$(GUILE_SO): $(SRCS) |
| $(SWIG) -c++ -guile -Linkage passive $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDES) $(GUILE_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(GUILE_LIBS) $(LIBS) $(CPP_DLLIBS) -o $@ |
| |
| guile_externalhdr: |
| $(SWIG) -guile -external-runtime $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Build Guile interpreter augmented with extra functions |
| # ----------------------------------------------------------------- |
| |
| guile_augmented: |
| $(SWIG) -guile $(SWIGOPT) $(INTERFACE) |
| $(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) -o $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Build statically linked Guile interpreter |
| # ----------------------------------------------------------------- |
| |
| guile_static: $(SRCS) |
| $(SWIG) -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDES) \ |
| -DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \ |
| $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile |
| |
| guile_static_cpp: $(SRCS) |
| $(SWIG) -c++ -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) \ |
| -DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \ |
| $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile |
| |
| guile_simple: $(SRCS) |
| $(SWIG) -guile -lguilemain.i -Linkage simple $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDES) \ |
| $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile |
| |
| guile_simple_cpp: $(SRCS) |
| $(SWIG) -c++ -guile -lguilemain.i -Linkage simple $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) \ |
| $(GUILE_CFLAGS) $(GUILE_LIBS) $(LIBS) $(GUILE_LIBOPTS) -o $(TARGET)-guile |
| |
| # ----------------------------------------------------------------- |
| # Running a Guile example |
| # ----------------------------------------------------------------- |
| |
| guile_run: |
| env GUILE_AUTO_COMPILE=0 $(RUNTOOL) $(GUILE) -l $(GUILE_SCRIPT) $(RUNPIPE) |
| |
| guile_augmented_run: |
| env GUILE_AUTO_COMPILE=0 $(RUNTOOL) ./$(TARGET) $(GUILE_RUNOPTIONS) -s $(GUILE_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| guile_version: |
| $(GUILE) --version | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Guile examples |
| # ----------------------------------------------------------------- |
| |
| guile_clean: |
| rm -f *_wrap* *~ .~* my-guile@EXEEXT@ $(TARGET)@EXEEXT@ |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@GUILE_SO@ |
| |
| ################################################################## |
| ##### JAVA ###### |
| ################################################################## |
| |
| # You need to set this variable to the java directories containing the |
| # files "jni.h" and "md.h" |
| # usually something like /usr/java/include and /usr/java/include/<arch-osname>. |
| JAVA_INCLUDE= @JAVAINC@ |
| |
| # Extra Java specific dynamic linking options |
| JAVA_DLNK = @JAVADYNAMICLINKING@ |
| JAVA_LIBPREFIX = @JAVALIBRARYPREFIX@ |
| JAVASO =@JAVASO@ |
| JAVALDSHARED = @JAVALDSHARED@ |
| JAVACXXSHARED = @JAVACXXSHARED@ |
| JAVACFLAGS = @JAVACFLAGS@ |
| JAVA = @JAVA@ |
| JAVAC = @JAVAC@ |
| |
| # ---------------------------------------------------------------- |
| # Build a java dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| java: $(SRCS) |
| $(SWIG) -java $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(JAVACFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) $(JAVA_INCLUDE) |
| $(JAVALDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) -o $(JAVA_LIBPREFIX)$(TARGET)$(JAVASO) |
| |
| # ---------------------------------------------------------------- |
| # Build a java dynamically loadable module (C++) |
| # ---------------------------------------------------------------- |
| |
| java_cpp: $(SRCS) |
| $(SWIG) -java -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(JAVACFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(JAVA_INCLUDE) |
| $(JAVACXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(JAVA_LIBPREFIX)$(TARGET)$(JAVASO) |
| |
| # ---------------------------------------------------------------- |
| # Compile java files |
| # ---------------------------------------------------------------- |
| |
| java_compile: $(SRCS) |
| $(COMPILETOOL) $(JAVAC) $(JAVACFLAGS) $(JAVASRCS) |
| |
| # ----------------------------------------------------------------- |
| # Run java example |
| # ----------------------------------------------------------------- |
| |
| java_run: |
| env LD_LIBRARY_PATH=. $(RUNTOOL) $(JAVA) $(RUNME) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| java_version: |
| $(JAVA) -version |
| $(JAVAC) -version || echo "Unknown javac version" |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the java examples |
| # ----------------------------------------------------------------- |
| |
| java_clean: |
| rm -f *_wrap* *~ .~* *.class `find . -name \*.java | grep -v $(RUNME).java` |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@JAVASO@ |
| |
| ################################################################## |
| ##### ANDROID ###### |
| ################################################################## |
| |
| ANDROID = android |
| ANDROID_NDK_BUILD = ndk-build |
| ANDROID_ADB = adb |
| ANT = ant |
| TARGETID = 1 |
| |
| # ---------------------------------------------------------------- |
| # Build an Android dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| android: $(SRCS) |
| $(ANDROID) $(SILENT_OPTION) update project --target $(TARGETID) --name $(PROJECTNAME) --path . |
| $(SWIG) -java $(SWIGOPT) -o $(INTERFACEDIR)$(TARGET)_wrap.c $(INTERFACEPATH) |
| +$(ANDROID_NDK_BUILD) $(SILENT_PIPE) |
| $(ANT) $(ANT_QUIET) debug |
| |
| # ---------------------------------------------------------------- |
| # Build an Android dynamically loadable module (C++) |
| # ---------------------------------------------------------------- |
| |
| android_cpp: $(SRCS) |
| $(ANDROID) $(SILENT_OPTION) update project --target $(TARGETID) --name $(PROJECTNAME) --path . |
| $(SWIG) -java -c++ $(SWIGOPT) -o $(INTERFACEDIR)$(TARGET)_wrap.cpp $(INTERFACEPATH) |
| +$(ANDROID_NDK_BUILD) $(SILENT_PIPE) |
| $(ANT) $(ANT_QUIET) debug |
| |
| # ---------------------------------------------------------------- |
| # Android install |
| # ---------------------------------------------------------------- |
| |
| android_install: |
| -$(ANDROID_ADB) uninstall $(PACKAGENAME) |
| $(ANDROID_ADB) install $(INSTALLOPTIONS) bin/$(PROJECTNAME)-debug.apk |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| android_version: |
| $(ANDROID_ADB) version |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Android examples |
| # ----------------------------------------------------------------- |
| |
| android_clean: |
| ant -q -logfile /dev/null clean |
| rm -f $(INTERFACEDIR)$(TARGET)_wrap.* |
| rm -f `find $(PACKAGEDIR) -name \*.java | grep -v $(PROJECTNAME).java` |
| rm -rf obj |
| |
| ################################################################## |
| ##### MODULA3 ###### |
| ################################################################## |
| |
| MODULA3_INCLUDE= @MODULA3INC@ |
| |
| # ---------------------------------------------------------------- |
| # Build a modula3 dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| modula3: $(SRCS) |
| $(SWIG) -modula3 $(SWIGOPT) $(INTERFACEPATH) |
| # $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) \ |
| # $(OBJS) $(IOBJS) $(LIBS) |
| |
| modula3_cpp: $(SRCS) |
| $(SWIG) -modula3 -c++ $(SWIGOPT) $(INTERFACEPATH) |
| |
| # ----------------------------------------------------------------- |
| # Run modula3 example |
| # ----------------------------------------------------------------- |
| |
| modula3_run: |
| $(RUNTOOL) false $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| modula3_version: |
| echo "Unknown modula3 version" |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the modula3 examples |
| # ----------------------------------------------------------------- |
| |
| modula3_clean: |
| rm -f *_wrap* *.i3 *.m3 |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### MZSCHEME ###### |
| ################################################################## |
| |
| MZSCHEME = mzscheme |
| MZC = @MZC@ |
| MZDYNOBJ = @MZDYNOBJ@ |
| MZSCHEME_SO = @MZSCHEME_SO@ |
| MZSCHEME_SCRIPT = $(RUNME).scm |
| |
| # ---------------------------------------------------------------- |
| # Build a C/C++ dynamically loadable module |
| # ---------------------------------------------------------------- |
| |
| mzscheme: $(SRCS) |
| $(SWIG) -mzscheme $(SWIGOPT) $(INTERFACEPATH) |
| $(COMPILETOOL) $(MZC) `echo $(INCLUDES) | sed 's/-I/++ccf -I/g'` --cc $(ISRCS) $(SRCS) |
| $(COMPILETOOL) $(MZC) --ld $(TARGET)$(MZSCHEME_SO) $(OBJS) $(IOBJS) |
| |
| mzscheme_cpp: $(SRCS) |
| $(SWIG) -mzscheme -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(COMPILETOOL) $(MZC) `echo $(INCLUDES) | sed 's/-I/++ccf -I/g'` --cc $(ICXXSRCS) $(SRCS) $(CXXSRCS) |
| $(CXXSHARED) $(CFLAGS) -o $(LIBPREFIX)$(TARGET)$(MZSCHEME_SO) $(OBJS) $(IOBJS) $(MZDYNOBJ) $(CPP_DLLIBS) |
| |
| # ----------------------------------------------------------------- |
| # Run mzscheme example |
| # ----------------------------------------------------------------- |
| |
| mzscheme_run: |
| env LD_LIBRARY_PATH=. $(RUNTOOL) $(MZSCHEME) -r $(MZSCHEME_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| mzscheme_version: |
| $(MZSCHEME) -v |
| $(MZC) -v |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the mzscheme examples |
| # ----------------------------------------------------------------- |
| |
| mzscheme_clean: |
| rm -f *_wrap* *~ .~* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### Ocaml ##### |
| ################################################################## |
| |
| OCC=@OCAMLC@ |
| OCAMLDLGEN=@OCAMLDLGEN@ |
| OCAMLFIND=@OCAMLFIND@ |
| OCAMLMKTOP=@OCAMLMKTOP@ $(SWIGWHERE) |
| NOLINK ?= false |
| OCAMLPP= -pp "camlp4o ./swigp4.cmo" |
| OCAMLP4WHERE=`$(COMPILETOOL) camlp4 -where` |
| OCAMLCORE=\ |
| rm -rf swig.mli swig.ml swigp4.ml && \ |
| $(SWIG) -ocaml -co swig.mli 2>/dev/null && \ |
| $(SWIG) -ocaml -co swig.ml 2>/dev/null && \ |
| $(SWIG) -ocaml -co swigp4.ml 2>/dev/null && \ |
| $(OCC) -c swig.mli && \ |
| $(OCC) -c swig.ml && \ |
| $(OCC) -I $(OCAMLP4WHERE) -pp "camlp4o pa_extend.cmo q_MLast.cmo" \ |
| -c swigp4.ml |
| |
| ocaml_static: $(SRCS) |
| $(OCAMLCORE) |
| $(SWIG) -ocaml $(SWIGOPT) $(INTERFACEPATH) |
| $(OCC) -g -c -ccopt -g -ccopt "$(INCLUDES)" $(ISRCS) $(SRCS) |
| $(OCC) -g -c $(INTERFACE:%.i=%.mli) |
| $(OCC) -g -c $(INTERFACE:%.i=%.ml) |
| test -z "$(PROGFILE)" || test -f "$(PROGFILE)" && \ |
| $(OCC) $(OCAMLPP) -c $(PROGFILE) |
| $(NOLINK) || $(OCC) -g -ccopt -g -cclib -g -custom -o $(TARGET) \ |
| swig.cmo \ |
| $(INTERFACE:%.i=%.cmo) \ |
| $(PROGFILE:%.ml=%.cmo) \ |
| $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) -cclib "$(LIBS)" |
| |
| ocaml_dynamic: $(SRCS) |
| $(OCAMLCORE) |
| $(SWIG) -ocaml $(SWIGOPT) $(INTERFACEPATH) |
| $(OCC) -g -c -ccopt -g -ccopt "$(INCLUDES)" $(ISRCS) $(SRCS) |
| $(CXXSHARED) $(CFLAGS) $(CCSHARED) $(CFLAGS) -o $(INTERFACE:%.i=%@SO@) \ |
| $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) $(LIBS) |
| $(OCAMLDLGEN) $(INTERFACE:%.i=%.ml) $(INTERFACE:%.i=%@SO@) > \ |
| $(INTERFACE:%.i=%_dynamic.ml) |
| mv $(INTERFACE:%.i=%_dynamic.ml) $(INTERFACE:%.i=%.ml) |
| rm $(INTERFACE:%.i=%.mli) |
| $(OCAMLFIND) $(OCC) -g -c -package dl $(INTERFACE:%.i=%.ml) |
| test -z "$(PROGFILE)" || test -f "$(PROGFILE)" && \ |
| $(OCC) $(OCAMLPP) -c $(PROGFILE) |
| $(NOLINK) || $(OCAMLFIND) \ |
| $(OCC) -g -ccopt -g -cclib -g -custom -o $(TARGET) \ |
| swig.cmo \ |
| -package dl -linkpkg \ |
| $(INTERFACE:%.i=%.cmo) $(PROGFILE:%.ml=%.cmo) |
| |
| ocaml_static_toplevel: $(SRCS) |
| $(OCAMLCORE) |
| $(SWIG) -ocaml $(SWIGOPT) $(INTERFACEPATH) |
| $(OCC) -g -c -ccopt -g -ccopt "$(INCLUDES)" $(ISRCS) $(SRCS) |
| $(OCC) -g -c $(INTERFACE:%.i=%.mli) |
| $(OCC) -g -c $(INTERFACE:%.i=%.ml) |
| test -z "$(PROGFILE)" || test -f "$(PROGFILE)" && \ |
| $(OCC) $(OCAMLPP) -c $(PROGFILE) |
| $(NOLINK) || $(OCAMLMKTOP) \ |
| swig.cmo \ |
| -I $(OCAMLP4WHERE) camlp4o.cma swigp4.cmo \ |
| -g -ccopt -g -cclib -g -custom -o $(TARGET)_top \ |
| $(INTERFACE:%.i=%.cmo) \ |
| $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) -cclib "$(LIBS)" |
| |
| ocaml_static_cpp: $(SRCS) |
| $(OCAMLCORE) |
| $(SWIG) -ocaml -c++ $(SWIGOPT) $(INTERFACEPATH) |
| cp $(ICXXSRCS) $(ICXXSRCS:%.cxx=%.c) |
| $(OCC) -cc '$(CXX) -Wno-write-strings' -g -c -ccopt -g -ccopt "-xc++ $(INCLUDES)" \ |
| $(ICXXSRCS:%.cxx=%.c) $(SRCS) $(CXXSRCS) |
| $(OCC) -g -c $(INTERFACE:%.i=%.mli) |
| $(OCC) -g -c $(INTERFACE:%.i=%.ml) |
| test -z "$(PROGFILE)" || test -f "$(PROGFILE)" && \ |
| $(OCC) $(OCAMLPP) -c $(PROGFILE) |
| $(NOLINK) || $(OCC) -g -ccopt -g -cclib -g -custom -o $(TARGET) \ |
| swig.cmo \ |
| $(INTERFACE:%.i=%.cmo) \ |
| $(PROGFILE:%.ml=%.cmo) \ |
| $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) \ |
| -cclib "$(LIBS)" -cc '$(CXX) -Wno-write-strings' |
| |
| ocaml_static_cpp_toplevel: $(SRCS) |
| $(OCAMLCORE) |
| $(SWIG) -ocaml -c++ $(SWIGOPT) $(INTERFACEPATH) |
| cp $(ICXXSRCS) $(ICXXSRCS:%.cxx=%.c) |
| $(OCC) -cc '$(CXX) -Wno-write-strings' -g -c -ccopt -g -ccopt "-xc++ $(INCLUDES)" \ |
| $(ICXXSRCS:%.cxx=%.c) $(SRCS) $(CXXSRCS) |
| $(OCC) -g -c $(INTERFACE:%.i=%.mli) |
| $(OCC) -g -c $(INTERFACE:%.i=%.ml) |
| test -z "$(PROGFILE)" || test -f "$(PROGFILE)" && \ |
| $(OCC) $(OCAMLPP) -c $(PROGFILE) |
| $(NOLINK) || $(OCAMLMKTOP) \ |
| swig.cmo \ |
| -I $(OCAMLP4WHERE) dynlink.cma camlp4o.cma swigp4.cmo \ |
| -g -ccopt -g -cclib -g -custom -o $(TARGET)_top \ |
| $(INTERFACE:%.i=%.cmo) \ |
| $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) \ |
| -cclib "$(LIBS)" -cc '$(CXX) -Wno-write-strings' |
| |
| ocaml_dynamic_cpp: $(SRCS) |
| $(OCAMLCORE) |
| $(SWIG) -ocaml -c++ $(SWIGOPT) $(INTERFACEPATH) |
| cp $(ICXXSRCS) $(ICXXSRCS:%.cxx=%.c) |
| $(OCC) -cc '$(CXX) -Wno-write-strings' -g -c -ccopt -g -ccopt "-xc++ $(INCLUDES)" \ |
| $(ICXXSRCS:%.cxx=%.c) $(SRCS) $(CXXSRCS) -ccopt -fPIC |
| $(CXXSHARED) $(CFLAGS) -o $(INTERFACE:%.i=%@SO@) \ |
| $(INTERFACE:%.i=%_wrap.@OBJEXT@) $(OBJS) \ |
| $(CPP_DLLIBS) $(LIBS) |
| $(OCAMLDLGEN) $(INTERFACE:%.i=%.ml) $(INTERFACE:%.i=%@SO@) > \ |
| $(INTERFACE:%.i=%_dynamic.ml) |
| mv $(INTERFACE:%.i=%_dynamic.ml) $(INTERFACE:%.i=%.ml) |
| rm $(INTERFACE:%.i=%.mli) |
| $(OCAMLFIND) $(OCC) -g -c -package dl $(INTERFACE:%.i=%.ml) |
| test -z "$(PROGFILE)" || test -f "$(PROGFILE)" && \ |
| $(OCC) $(OCAMLPP) -c $(PROGFILE) |
| $(NOLINK) || $(OCAMLFIND) \ |
| swig.cmo \ |
| $(OCC) -cclib -export-dynamic -g -ccopt -g -cclib -g -custom \ |
| -o $(TARGET) \ |
| -package dl -linkpkg \ |
| $(INTERFACE:%.i=%.cmo) $(PROGFILE:%.ml=%.cmo) -cc '$(CXX) -Wno-write-strings' |
| |
| # ----------------------------------------------------------------- |
| # Run ocaml example |
| # ----------------------------------------------------------------- |
| |
| ocaml_run: |
| $(RUNTOOL) ./$(TARGET) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| ocaml_version: |
| $(OCC) -version |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Ocaml examples |
| # ----------------------------------------------------------------- |
| |
| ocaml_clean: |
| rm -f *_wrap* *~ .~* *.cmo *.cmi $(MLFILE) $(MLFILE)i swig.mli swig.cmi swig.ml swig.cmo swigp4.ml swigp4.cmo |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### RUBY ###### |
| ################################################################## |
| |
| # Make sure these locate your Ruby installation |
| RUBY_CFLAGS= @RUBYCCDLFLAGS@ $(DEFS) |
| RUBY_INCLUDE= @RUBYINCLUDE@ |
| RUBY_LIB = @RUBYLIB@ |
| RUBY_DLNK = @RUBYDYNAMICLINKING@ |
| RUBY_LIBOPTS = @RUBYLINK@ @LIBS@ $(SYSLIBS) |
| RUBY_SO = @RUBYSO@ |
| RUBY = @RUBY@ |
| RUBY_SCRIPT = $(RUNME).rb |
| |
| |
| # ---------------------------------------------------------------- |
| # Build a C dynamically loadable module |
| # ---------------------------------------------------------------- |
| |
| ruby: $(SRCS) |
| $(SWIG) -ruby $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ISRCS) $(SRCS) $(INCLUDES) $(RUBY_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(RUBY_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(RUBY_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build a C++ dynamically loadable module |
| # ----------------------------------------------------------------- |
| |
| ruby_cpp: $(SRCS) |
| $(SWIG) -c++ -ruby $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) $(RUBY_INCLUDE) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(RUBY_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(RUBY_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build statically linked Ruby interpreter |
| # |
| # These should only be used in conjunction with the %include embed.i |
| # library file |
| # ----------------------------------------------------------------- |
| |
| ruby_static: $(SRCS) |
| $(SWIG) -ruby -lembed.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(RUBY_CFLAGS) @LINKFORSHARED@ $(ISRCS) $(SRCS) $(INCLUDES) \ |
| $(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET) |
| |
| ruby_cpp_static: $(SRCS) |
| $(SWIG) -c++ -ruby -lembed.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) \ |
| $(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Run Ruby example |
| # ----------------------------------------------------------------- |
| |
| ruby_run: |
| $(RUNTOOL) $(RUBY) -I. $(RUBY_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| ruby_version: |
| $(RUBY) -v |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Ruby examples |
| # ----------------------------------------------------------------- |
| |
| ruby_clean: |
| rm -f *_wrap* *~ .~* myruby@EXEEXT@ *.pm |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### PHP ###### |
| ################################################################## |
| |
| PHP = @PHP@ |
| PHP_INCLUDE = @PHPINC@ |
| PHP_SO = @PHP_SO@ |
| PHP_SCRIPT = $(RUNME).php |
| |
| # ------------------------------------------------------------------- |
| # Build a PHP dynamically loadable module (C) |
| # ------------------------------------------------------------------- |
| |
| php: $(SRCS) |
| $(SWIG) -php $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) $(PHP_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(PHP_SO) |
| |
| # -------------------------------------------------------------------- |
| # Build a PHP dynamically loadable module (C++) |
| # -------------------------------------------------------------------- |
| |
| php_cpp: $(SRCS) |
| $(SWIG) -php -cppext cxx -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) $(PHP_INCLUDE) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(PHP_SO) |
| |
| # ----------------------------------------------------------------- |
| # Running a PHP example |
| # ----------------------------------------------------------------- |
| |
| php_run: |
| $(RUNTOOL) $(PHP) -n -q -d extension_dir=. -d safe_mode=Off $(PHP_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| php_version: |
| $(PHP) -v | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the PHP examples |
| # ----------------------------------------------------------------- |
| |
| php_clean: |
| rm -f *_wrap* *~ .~* example.php php_example.h |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### Pike ###### |
| ################################################################## |
| |
| # Make sure these locate your Pike installation |
| PIKE = pike |
| PIKE_CFLAGS = @PIKECCDLFLAGS@ -DHAVE_CONFIG_H |
| PIKE_INCLUDE = @PIKEINCLUDE@ |
| PIKE_LIB = @PIKELIB@ |
| PIKE_DLNK = @PIKEDYNAMICLINKING@ |
| PIKE_LIBOPTS = @PIKELINK@ @LIBS@ $(SYSLIBS) |
| PIKE_SCRIPT = $(RUNME).pike |
| |
| # ---------------------------------------------------------------- |
| # Build a C dynamically loadable module |
| # ---------------------------------------------------------------- |
| |
| pike: $(SRCS) |
| $(SWIG) -pike $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(PIKE_CFLAGS) $(ISRCS) $(SRCS) $(INCLUDES) $(PIKE_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(PIKE_DLNK) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ----------------------------------------------------------------- |
| # Build a C++ dynamically loadable module |
| # ----------------------------------------------------------------- |
| |
| pike_cpp: $(SRCS) |
| $(SWIG) -c++ -pike $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(PIKE_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) $(PIKE_INCLUDE) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(PIKE_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ----------------------------------------------------------------- |
| # Build statically linked Pike interpreter |
| # |
| # These should only be used in conjunction with the %include embed.i |
| # library file |
| # ----------------------------------------------------------------- |
| |
| pike_static: $(SRCS) |
| $(SWIG) -pike -lembed.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(PIKE_CFLAGS) @LINKFORSHARED@ $(ISRCS) $(SRCS) $(INCLUDES) \ |
| $(PIKE_INCLUDE) $(LIBS) -L$(PIKE_LIB) $(PIKE_LIBOPTS) -o $(TARGET) |
| |
| pike_cpp_static: $(SRCS) |
| $(SWIG) -c++ -pike -lembed.i $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(PIKE_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) \ |
| $(PIKE_INCLUDE) $(LIBS) -L$(PIKE_LIB) $(PIKE_LIBOPTS) -o $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Run pike example |
| # ----------------------------------------------------------------- |
| |
| pike_run: |
| $(RUNTOOL) $(PIKE) $(PIKE_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| pike_version: |
| $(PIKE) -v 2>&1 | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Pike examples |
| # ----------------------------------------------------------------- |
| |
| pike_clean: |
| rm -f *_wrap* *~ .~* mypike@EXEEXT@ |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| |
| ################################################################## |
| ##### Chicken ###### |
| ################################################################## |
| |
| CHICKEN = @CHICKEN@ |
| CHICKEN_CSC = @CHICKEN_CSC@ |
| CHICKEN_CSI = @CHICKEN_CSI@ |
| CHICKEN_LIBOPTS = @CHICKENLIB@ $(SYSLIBS) |
| CHICKEN_SHAREDLIBOPTS = @CHICKENSHAREDLIB@ $(SYSLIBS) |
| CHICKEN_CFLAGS = @CHICKENOPTS@ |
| CHICKENOPTS = -quiet |
| CHICKEN_MAIN = |
| CHICKEN_SCRIPT = $(RUNME).scm |
| |
| # SWIG produces $(ISRCS) (the C wrapper file) |
| # and $(CHICKEN_GENERATED_SCHEME) (the Scheme wrapper file): |
| CHICKEN_GENERATED_SCHEME = $(INTERFACE:.i=.scm) |
| CHICKEN_COMPILED_SCHEME = $(INTERFACE:.i=_chicken.c) |
| CHICKEN_COMPILED_OBJECT = $(CHICKEN_COMPILED_SCHEME:.c=.@OBJEXT@) |
| |
| # flags for the main chicken sources (only used when compiling staticly) |
| CHICKEN_COMPILED_MAIN = $(CHICKEN_MAIN:.scm=_chicken.c) |
| CHICKEN_COMPILED_MAIN_OBJECT = $(CHICKEN_COMPILED_MAIN:.c=.@OBJEXT@) |
| |
| # ----------------------------------------------------------------- |
| # Build a CHICKEN dynamically loadable module |
| # ----------------------------------------------------------------- |
| |
| # This is the old way to build chicken, but it does not work correctly with exceptions |
| chicken_direct: $(SRCS) |
| $(SWIG) -chicken $(SWIGOPT) $(INCLUDE) $(INTERFACEPATH) |
| $(CHICKEN) $(CHICKEN_GENERATED_SCHEME) $(CHICKENOPTS) \ |
| -dynamic -feature chicken-compile-shared \ |
| -output-file $(CHICKEN_COMPILED_SCHEME) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(CHICKEN_CFLAGS) \ |
| $(INCLUDES) $(CHICKEN_INCLUDE) $(ISRCS) $(SRCS) $(CHICKEN_COMPILED_SCHEME) |
| $(LDSHARED) $(CFLAGS) $(CHICKEN_COMPILED_OBJECT) $(OBJS) $(IOBJS) \ |
| $(LIBS) $(CHICKEN_SHAREDLIBOPTS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| chicken_direct_cpp: $(CXXSRCS) $(CHICKSRCS) |
| $(SWIG) -c++ -chicken $(SWIGOPT) $(INCLUDE) $(INTERFACEPATH) |
| $(CHICKEN) $(CHICKEN_GENERATED_SCHEME) $(CHICKENOPTS) \ |
| -dynamic -feature chicken-compile-shared \ |
| -output-file $(CHICKEN_COMPILED_SCHEME) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(CHICKEN_CFLAGS) \ |
| $(INCLUDES) $(CHICKEN_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(CHICKEN_COMPILED_SCHEME) |
| $(CXXSHARED) $(CFLAGS) $(CHICKEN_COMPILED_OBJECT) $(OBJS) $(IOBJS) \ |
| $(LIBS) $(CPP_DLLIBS) $(CHICKEN_SHAREDLIBOPTS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ----------------------------------------------------------------- |
| # Build statically linked CHICKEN interpreter |
| # ----------------------------------------------------------------- |
| |
| # The following two targets are also used by the test suite |
| chicken_static: $(SRCS) $(CHICKSRCS) |
| $(SWIG) -chicken $(SWIGOPT) $(INCLUDE) $(INTERFACEPATH) |
| $(CHICKEN) $(CHICKEN_GENERATED_SCHEME) $(CHICKENOPTS) \ |
| -output-file $(CHICKEN_COMPILED_SCHEME) |
| $(CHICKEN) $(CHICKEN_MAIN) $(CHICKENOPTS) \ |
| -output-file $(CHICKEN_MAIN:.scm=_chicken.c) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(CHICKEN_CFLAGS) \ |
| $(INCLUDES) $(CHICKEN_INCLUDE) $(ISRCS) $(SRCS) \ |
| $(CHICKEN_COMPILED_SCHEME) $(CHICKEN_COMPILED_MAIN) |
| $(CC) $(CHICKEN_COMPILED_OBJECT) $(CHICKEN_COMPILED_MAIN_OBJECT) \ |
| $(OBJS) $(IOBJS) $(LIBS) $(CHICKEN_SHAREDLIBOPTS) -o $(TARGET) |
| |
| chicken_static_cpp: $(CXXSRCS) $(CHICKSRCS) |
| $(SWIG) -c++ -chicken $(SWIGOPT) $(INCLUDE) $(INTERFACEPATH) |
| $(CHICKEN) $(CHICKEN_GENERATED_SCHEME) $(CHICKENOPTS) \ |
| -output-file $(CHICKEN_COMPILED_SCHEME) |
| $(CHICKEN) $(CHICKEN_MAIN) $(CHICKENOPTS) \ |
| -output-file $(CHICKEN_MAIN:.scm=_chicken.c) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(CHICKEN_CFLAGS) \ |
| $(INCLUDES) $(CHICKEN_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS) \ |
| $(CHICKEN_COMPILED_SCHEME) $(CHICKEN_COMPILED_MAIN) |
| $(CXX) $(CHICKEN_COMPILED_OBJECT) $(CHICKEN_COMPILED_MAIN_OBJECT) \ |
| $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) $(CHICKEN_SHAREDLIBOPTS) -o $(TARGET) |
| |
| # ---------------------------------------------------------------- |
| # Build a shared library using csc |
| # ---------------------------------------------------------------- |
| |
| chicken: |
| $(SWIG) -chicken $(SWIGOPT) $(INCLUDE) $(INTERFACEPATH) |
| $(COMPILETOOL) $(CHICKEN_CSC) -s `echo $(INCLUDES) | sed 's/-I/-C -I/g'` $(CHICKEN_GENERATED_SCHEME) $(SRCS) $(ISRCS) -o $(TARGET)$(SO) |
| |
| chicken_cpp: |
| $(SWIG) -c++ -chicken $(SWIGOPT) $(INCLUDE) $(INTERFACEPATH) |
| $(COMPILETOOL) $(CHICKEN_CSC) -s `echo $(INCLUDES) | sed 's/-I/-C -I/g'` $(CHICKEN_GENERATED_SCHEME) $(SRCS) $(ICXXSRCS) $(CXXSRCS) -o $(TARGET)$(SO) |
| |
| chicken_externalhdr: |
| $(SWIG) -chicken -external-runtime $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Run CHICKEN example |
| # ----------------------------------------------------------------- |
| |
| chicken_run: |
| env LD_LIBRARY_PATH=. $(RUNTOOL) $(CHICKEN_CSI) $(CHICKEN_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| chicken_version: |
| $(CHICKEN) -version | grep -i version |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the CHICKEN examples |
| # ----------------------------------------------------------------- |
| |
| chicken_clean: |
| rm -f *_wrap* *~ .~* *_chicken* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### CSHARP ###### |
| ################################################################## |
| |
| # Extra CSharp specific dynamic linking options |
| CSHARP_DLNK = @CSHARPDYNAMICLINKING@ |
| CSHARP_LIBPREFIX = @CSHARPLIBRARYPREFIX@ |
| CSHARPCOMPILER = @CSHARPCOMPILER@ |
| CSHARPCILINTERPRETER = @CSHARPCILINTERPRETER@ |
| CSHARPCFLAGS = @CSHARPCFLAGS@ |
| CSHARPSO = @CSHARPSO@ |
| CSHARP_RUNME = ./$(RUNME).exe |
| |
| # ---------------------------------------------------------------- |
| # Build a CSharp dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| csharp: $(SRCS) |
| $(SWIG) -csharp $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(CSHARPCFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(CSHARP_DLNK) $(LIBS) -o $(CSHARP_LIBPREFIX)$(TARGET)$(CSHARPSO) |
| |
| # ---------------------------------------------------------------- |
| # Build a CSharp dynamically loadable module (C++) |
| # ---------------------------------------------------------------- |
| |
| csharp_cpp: $(SRCS) |
| $(SWIG) -csharp -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(CSHARPCFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(CSHARP_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(CSHARP_LIBPREFIX)$(TARGET)$(CSHARPSO) |
| |
| # ---------------------------------------------------------------- |
| # Compile CSharp files |
| # ---------------------------------------------------------------- |
| |
| csharp_compile: $(SRCS) |
| $(COMPILETOOL) $(CSHARPCOMPILER) $(CSHARPFLAGS) $(CSHARPSRCS) |
| |
| # ----------------------------------------------------------------- |
| # Run CSharp example |
| # ----------------------------------------------------------------- |
| |
| csharp_run: |
| env LD_LIBRARY_PATH=. $(RUNTOOL) $(CSHARP_RUNME) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| # Version check below also works with MS csc.exe which does not understand --version |
| csharp_version: |
| $(CSHARPCOMPILER) --version | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the CSharp examples |
| # ----------------------------------------------------------------- |
| |
| csharp_clean: |
| rm -f *_wrap* *~ .~* runme runme.exe *.exe.mdb gc.log `find . -name \*.cs | grep -v runme.cs` |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@CSHARPSO@ |
| |
| ################################################################## |
| ##### LUA ###### |
| ################################################################## |
| |
| # lua flags |
| LUA_INCLUDE= @LUAFLAGS@ |
| LUA_LIB = @LUALINK@ |
| |
| # Extra specific dynamic linking options |
| LUA_DLNK = @LUADYNAMICLINKING@ |
| LUA_SO = @LUA_SO@ |
| |
| LUA = @LUABIN@ |
| LUA_SCRIPT = $(RUNME).lua |
| |
| # Extra code for lua static link |
| LUA_INTERP = ../lua.c |
| |
| # ---------------------------------------------------------------- |
| # Build a C dynamically loadable module |
| # ---------------------------------------------------------------- |
| |
| lua: $(SRCS) |
| $(SWIG) -lua $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDES) $(LUA_INCLUDE) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(LUA_LIB) -o $(LIBPREFIX)$(TARGET)$(LUA_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build a C++ dynamically loadable module |
| # ----------------------------------------------------------------- |
| |
| lua_cpp: $(SRCS) |
| $(SWIG) -c++ -lua $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) $(LUA_INCLUDE) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(LUA_LIB) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(LUA_SO) |
| |
| # ----------------------------------------------------------------- |
| # Build statically linked Lua interpreter |
| # ----------------------------------------------------------------- |
| |
| lua_static: $(SRCS) |
| $(SWIG) -lua -module example $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(LUA_INTERP) $(INCLUDES) \ |
| $(LUA_INCLUDE) $(LIBS) $(LUA_LIB) -o $(TARGET) |
| |
| lua_static_cpp: $(SRCS) |
| $(SWIG) -c++ -lua -module example $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(LUA_INTERP) $(INCLUDES) \ |
| $(LUA_INCLUDE) $(LIBS) $(LUA_LIB) -o $(TARGET) |
| |
| # ----------------------------------------------------------------- |
| # Run Lua example |
| # ----------------------------------------------------------------- |
| |
| lua_run: |
| $(RUNTOOL) $(LUA) $(LUA_SCRIPT) $(RUNPIPE) |
| |
| lua_embed_run: |
| $(RUNTOOL) ./$(TARGET) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| lua_version: |
| $(LUA) -v | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the lua examples |
| # ----------------------------------------------------------------- |
| |
| lua_clean: |
| rm -f *_wrap* *~ .~* mylua@EXEEXT@ |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### ALLEGRO CL ###### |
| ################################################################## |
| |
| ALLEGROCL = @ALLEGROCLBIN@ |
| ALLEGROCL_SCRIPT=$(RUNME).lisp |
| |
| allegrocl: $(SRCS) |
| $(SWIG) -allegrocl -cwrap $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(INCLUDES) $(SRCS) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| allegrocl_cpp: $(SRCS) |
| $(SWIG) -c++ -allegrocl $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ----------------------------------------------------------------- |
| # Run ALLEGRO CL example |
| # ----------------------------------------------------------------- |
| |
| allegrocl_run: |
| $(RUNTOOL) $(ALLEGROCL) -batch -s $(ALLEGROCL_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| allegrocl_version: |
| $(ALLEGROCL) --version |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the ALLEGRO CL examples |
| # ----------------------------------------------------------------- |
| |
| allegrocl_clean: |
| rm -f *_wrap* *~ .~* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### CLISP ###### |
| ################################################################## |
| |
| CLISP = @CLISPBIN@ |
| CLISP_SCRIPT=$(RUNME).lisp |
| |
| clisp: $(SRCS) |
| $(SWIG) -clisp $(SWIGOPT) $(INTERFACEPATH) |
| |
| clisp_cpp: $(SRCS) |
| $(SWIG) -c++ -clisp $(SWIGOPT) $(INTERFACEPATH) |
| |
| # ----------------------------------------------------------------- |
| # Run CLISP example |
| # ----------------------------------------------------------------- |
| |
| clisp_run: |
| $(RUNTOOL) $(CLISP) -batch -s $(CLISP_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| clisp_version: |
| $(CLISP) --version | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the CLISP examples |
| # ----------------------------------------------------------------- |
| |
| clisp_clean: |
| rm -f *_wrap* *~ .~* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### CFFI ###### |
| ################################################################## |
| |
| CFFI = @CFFIBIN@ |
| CFFI_SCRIPT=$(RUNME).lisp |
| |
| cffi: $(SRCS) |
| $(SWIG) -cffi $(SWIGOPT) $(INTERFACEPATH) |
| # $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(INCLUDES) $(SRCS) |
| # $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| cffi_cpp: $(SRCS) |
| $(SWIG) -c++ -cffi $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ----------------------------------------------------------------- |
| # Run CFFI example |
| # ----------------------------------------------------------------- |
| |
| cffi_run: |
| $(RUNTOOL) $(CFFI) -batch -s $(CFFI_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| cffi_version: |
| $(CFFI) --version |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the CFFI examples |
| # ----------------------------------------------------------------- |
| |
| cffi_clean: |
| rm -f *_wrap* *~ .~* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### UFFI ###### |
| ################################################################## |
| |
| UFFI = @UFFIBIN@ |
| UFFI_SCRIPT=$(RUNME).lisp |
| |
| uffi: $(SRCS) |
| $(SWIG) -uffi $(SWIGOPT) $(INTERFACEPATH) |
| # $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(INCLUDES) $(SRCS) |
| # $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| uffi_cpp: $(SRCS) |
| $(SWIG) -c++ -uffi $(SWIGOPT) $(INTERFACEPATH) |
| # $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDES) |
| # $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| |
| # ----------------------------------------------------------------- |
| # Run UFFI example |
| # ----------------------------------------------------------------- |
| |
| uffi_run: |
| $(RUNTOOL) $(UFFI) -batch -s $(UFFI_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| uffi_version: |
| $(UFFI) --version |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the UFFI examples |
| # ----------------------------------------------------------------- |
| |
| uffi_clean: |
| rm -f *_wrap* *~ .~* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
| |
| ################################################################## |
| ##### R ###### |
| ################################################################## |
| |
| R = R |
| RCXXSRCS = $(INTERFACE:.i=_wrap.cpp) #Need to use _wrap.cpp for R build system as it does not understand _wrap.cxx |
| RRSRC = $(INTERFACE:.i=.R) |
| R_CFLAGS=-fPIC |
| R_SCRIPT=$(RUNME).R |
| |
| # need to compile .cxx files outside of R build system to make sure that |
| # we get -fPIC |
| # CMD SHLIB stdout is piped to /dev/null to prevent echo of compiler command |
| |
| # ---------------------------------------------------------------- |
| # Build a R dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| r: $(SRCS) |
| $(SWIG) -r $(SWIGOPT) $(INTERFACEPATH) |
| ifneq ($(SRCS),) |
| $(CC) -g -c $(CFLAGS) $(R_CFLAGS) $(SRCS) $(INCLUDES) |
| endif |
| +( PKG_CPPFLAGS="$(INCLUDES)" $(COMPILETOOL) $(R) CMD SHLIB -o $(LIBPREFIX)$(TARGET)$(SO) $(ISRCS) $(OBJS) > /dev/null ) |
| |
| # ---------------------------------------------------------------- |
| # Build a R dynamically loadable module (C++) |
| # ---------------------------------------------------------------- |
| |
| r_cpp: $(CXXSRCS) |
| $(SWIG) -c++ -r $(SWIGOPT) -o $(RCXXSRCS) $(INTERFACEPATH) |
| ifneq ($(CXXSRCS),) |
| $(CXX) -g -c $(CFLAGS) $(R_CFLAGS) $(CXXSRCS) $(INCLUDES) |
| endif |
| +( PKG_CPPFLAGS="$(INCLUDES)" $(COMPILETOOL) $(R) CMD SHLIB -o $(LIBPREFIX)$(TARGET)$(SO) $(RCXXSRCS) $(OBJS) > /dev/null ) |
| |
| # ----------------------------------------------------------------- |
| # Run R example |
| # ----------------------------------------------------------------- |
| |
| r_run: |
| $(RUNTOOL) $(R) CMD BATCH $(R_SCRIPT) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| r_version: |
| $(R) --version | head -n 1 |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the R examples |
| # ----------------------------------------------------------------- |
| |
| r_clean: |
| rm -f *_wrap* *~ .~* |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ NAMESPACE |
| rm -f $(RRSRC) $(RUNME).Rout .RData |
| |
| ################################################################## |
| ##### Go ###### |
| ################################################################## |
| |
| GO = @GO@ |
| GOGCC = @GOGCC@ |
| GO1 = @GO1@ |
| GOC = @GOC@ |
| GOOPT = @GOOPT@ |
| GOVERSIONOPTION = @GOVERSIONOPTION@ |
| |
| GOSWIGARG = `if $(GOGCC) ; then echo -gccgo; fi` |
| GOCOMPILEARG = `if $(GOGCC) ; then echo -c -g; elif $(GO1) ; then echo tool $(GOC:c=g) ; fi` |
| |
| GOSRCS = $(INTERFACE:.i=.go) |
| GOCSRCS = $(INTERFACE:.i=_gc.c) |
| |
| GOLD = $(GOC:c=l) |
| GOTOOL = `if $(GO1) ; then echo go tool; fi` |
| GOPACK = `if $(GO1) ; then echo go tool pack; else echo gopack; fi` |
| |
| GOPACKAGE = $(INTERFACE:.i=.a) |
| |
| GOOBJEXT = $(GOC:c=) |
| GOGCOBJS = $(GOSRCS:.go=.$(GOOBJEXT)) |
| GOGCCOBJS = $(GOSRCS:.go=.@OBJEXT@) |
| |
| # ---------------------------------------------------------------- |
| # Build a Go dynamically loadable module (C) |
| # ---------------------------------------------------------------- |
| |
| go: $(SRCS) |
| $(SWIG) -go $(GOOPT) $(GOSWIGARG) $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -g -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) |
| $(LDSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| $(COMPILETOOL) $(GO) $(GOCOMPILEARG) -I . $(GOSRCS) |
| if ! $(GOGCC) ; then \ |
| $(COMPILETOOL) $(GOTOOL) $(GOC) -I $${GOROOT}/pkg/$${GOOS}_$${GOARCH} $(GOCSRCS) && \ |
| $(COMPILETOOL) $(GOPACK) grc $(GOPACKAGE) $(GOGCOBJS) $(GOCSRCS:.c=.$(GOOBJEXT)); \ |
| fi |
| |
| # ---------------------------------------------------------------- |
| # Build a Go dynamically loadable module (C++) |
| # ---------------------------------------------------------------- |
| |
| go_cpp: $(SRCS) |
| $(SWIG) -go -c++ $(GOOPT) $(GOSWIGARG) $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -g -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) |
| $(CXXSHARED) $(CFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(LIBPREFIX)$(TARGET)$(SO) |
| $(COMPILETOOL) $(GO) $(GOCOMPILEARG) -I . $(GOSRCS) |
| if ! $(GOGCC) ; then \ |
| $(COMPILETOOL) $(GOTOOL) $(GOC) -I $${GOROOT}/pkg/$${GOOS}_$${GOARCH} $(GOCSRCS) && \ |
| $(COMPILETOOL) $(GOPACK) grc $(GOPACKAGE) $(GOGCOBJS) $(GOCSRCS:.c=.$(GOOBJEXT)); \ |
| fi |
| |
| # ----------------------------------------------------------------- |
| # Running a Go example |
| # ----------------------------------------------------------------- |
| |
| go_run: runme.go |
| $(GO) $(GOCOMPILEARG) runme.go |
| if $(GOGCC) ; then \ |
| $(COMPILETOOL) $(GO) -o runme runme.@OBJEXT@ $(GOGCCOBJS) $(LIBPREFIX)$(TARGET)$(SO); \ |
| else \ |
| $(COMPILETOOL) $(GOTOOL) $(GOLD) -r $${GOROOT}/pkg/$${GOOS}_$${GOARCH}:. -o runme runme.$(GOOBJEXT); \ |
| fi |
| env LD_LIBRARY_PATH=.:$$LD_LIBRARY_PATH $(RUNTOOL) ./runme $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| go_version: |
| $(GO) $(GOVERSIONOPTION) |
| |
| # ----------------------------------------------------------------- |
| # Cleaning the Go examples |
| # ----------------------------------------------------------------- |
| |
| go_clean: |
| rm -f *_wrap* *_gc* .~* runme $(GOSRCS) |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *.[568] *.a *@SO@ |
| |
| ################################################################## |
| ##### D ###### |
| ################################################################## |
| |
| DLIBPREFIX = @DLIBPREFIX@ |
| |
| ifeq (,$(D_VERSION)) |
| D_VERSION = @DDEFAULTVERSION@ |
| endif |
| |
| ifeq (2,$(D_VERSION)) |
| SWIGD = $(SWIG) -d -d2 |
| DCOMPILER = @D2COMPILER@ |
| else |
| SWIGD = $(SWIG) -d |
| DCOMPILER = @D1COMPILER@ |
| endif |
| |
| D_RUNME = ./$(RUNME) |
| |
| # ---------------------------------------------------------------- |
| # Build a dynamically loadable D wrapper for a C module |
| # ---------------------------------------------------------------- |
| |
| d: $(SRCS) |
| $(SWIGD) $(SWIGOPT) $(INTERFACEPATH) |
| $(CC) -c $(CCSHARED) $(CFLAGS) $(DCFLAGS) $(EXTRA_CFLAGS) $(SRCS) $(ISRCS) $(INCLUDES) |
| $(LDSHARED) $(CFLAGS) $(DCFLAGS) $(EXTRA_LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) -o $(DLIBPREFIX)$(TARGET)$(SO) |
| |
| # ---------------------------------------------------------------- |
| # Build a dynamically loadable D wrapper for a C++ module |
| # ---------------------------------------------------------------- |
| |
| d_cpp: $(SRCS) |
| $(SWIGD) -c++ $(SWIGOPT) $(INTERFACEPATH) |
| $(CXX) -c $(CCSHARED) $(CFLAGS) $(DCFLAGS) $(EXTRA_CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDES) |
| $(CXXSHARED) $(CFLAGS) $(DCFLAGS) $(EXTRA_LDFLAGS) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(DLIBPREFIX)$(TARGET)$(SO) |
| |
| # ---------------------------------------------------------------- |
| # Compile D files |
| # ---------------------------------------------------------------- |
| |
| # Clear the DFLAGS environment variable for the compiler call itself |
| # to work around a discrepancy in argument handling between DMD and LDC. |
| d_compile: $(SRCS) |
| DFLAGS="" $(COMPILETOOL) $(DCOMPILER) $(DFLAGS) $(DSRCS) |
| |
| # ----------------------------------------------------------------- |
| # Run D example |
| # ----------------------------------------------------------------- |
| |
| d_run: |
| $(RUNTOOL) $(D_RUNME) $(RUNPIPE) |
| |
| # ----------------------------------------------------------------- |
| # Version display |
| # ----------------------------------------------------------------- |
| |
| d_version: |
| # Needs improvement! |
| echo D version guess - $(D_VERSION) |
| |
| # ----------------------------------------------------------------- |
| # Clean the D examples |
| # ----------------------------------------------------------------- |
| |
| d_clean: |
| rm -f *_wrap* *~ .~* runme runme.exe `find . -name \*.d | grep -v runme.d` |
| rm -f core @EXTRA_CLEAN@ |
| rm -f *.@OBJEXT@ *@SO@ |
