| ------------------------------------------------------------------------ |
| r39 | snappy.mirrorbot@gmail.com | 2011-06-02 20:06:54 +0200 (Thu, 02 Jun 2011) | 11 lines |
| |
| Remove an unneeded goto in the decompressor; it turns out that the |
| state of ip_ after decompression (or attempted decompresion) is |
| completely irrelevant, so we don't need the trailer. |
| |
| Performance is, as expected, mostly flat -- there's a curious ~3–5% |
| loss in the “lsp” test, but that test case is so short it is hard to say |
| anything definitive about why (most likely, it's some sort of |
| unrelated effect). |
| |
| R=jeff |
| |
| ------------------------------------------------------------------------ |
| r38 | snappy.mirrorbot@gmail.com | 2011-06-02 19:59:40 +0200 (Thu, 02 Jun 2011) | 52 lines |
| |
| Speed up decompression by caching ip_. |
| |
| It is seemingly hard for the compiler to understand that ip_, the current input |
| pointer into the compressed data stream, can not alias on anything else, and |
| thus using it directly will incur memory traffic as it cannot be kept in a |
| register. The code already knew about this and cached it into a local |
| variable, but since Step() only decoded one tag, it had to move ip_ back into |
| place between every tag. This seems to have cost us a significant amount of |
| performance, so changing Step() into a function that decodes as much as it can |
| before it saves ip_ back and returns. (Note that Step() was already inlined, |
| so it is not the manual inlining that buys the performance here.) |
| |
| The wins are about 3–6% for Core 2, 6–13% on Core i7 and 5–12% on Opteron |
| (for plain array-to-array decompression, in 64-bit opt mode). |
| |
| There is a tiny difference in the behavior here; if an invalid literal is |
| encountered (ie., the writer refuses the Append() operation), ip_ will now |
| point to the byte past the tag byte, instead of where the literal was |
| originally thought to end. However, we don't use ip_ for anything after |
| DecompressAllTags() has returned, so this should not change external behavior |
| in any way. |
| |
| Microbenchmark results for Core i7, 64-bit (Opteron results are similar): |
| |
| Benchmark Time(ns) CPU(ns) Iterations |
| --------------------------------------------------- |
| BM_UFlat/0 79134 79110 8835 1.2GB/s html [ +6.2%] |
| BM_UFlat/1 786126 786096 891 851.8MB/s urls [+10.0%] |
| BM_UFlat/2 9948 9948 69125 11.9GB/s jpg [ -1.3%] |
| BM_UFlat/3 31999 31998 21898 2.7GB/s pdf [ +6.5%] |
| BM_UFlat/4 318909 318829 2204 1.2GB/s html4 [ +6.5%] |
| BM_UFlat/5 31384 31390 22363 747.5MB/s cp [ +9.2%] |
| BM_UFlat/6 14037 14034 49858 757.7MB/s c [+10.6%] |
| BM_UFlat/7 4612 4612 151395 769.5MB/s lsp [ +9.5%] |
| BM_UFlat/8 1203174 1203007 582 816.3MB/s xls [+19.3%] |
| BM_UFlat/9 253869 253955 2757 571.1MB/s txt1 [+11.4%] |
| BM_UFlat/10 219292 219290 3194 544.4MB/s txt2 [+12.1%] |
| BM_UFlat/11 672135 672131 1000 605.5MB/s txt3 [+11.2%] |
| BM_UFlat/12 902512 902492 776 509.2MB/s txt4 [+12.5%] |
| BM_UFlat/13 372110 371998 1881 1.3GB/s bin [ +5.8%] |
| BM_UFlat/14 50407 50407 10000 723.5MB/s sum [+13.5%] |
| BM_UFlat/15 5699 5701 100000 707.2MB/s man [+12.4%] |
| BM_UFlat/16 83448 83424 8383 1.3GB/s pb [ +5.7%] |
| BM_UFlat/17 256958 256963 2723 684.1MB/s gaviota [ +7.9%] |
| BM_UValidate/0 42795 42796 16351 2.2GB/s html [+25.8%] |
| BM_UValidate/1 490672 490622 1427 1.3GB/s urls [+22.7%] |
| BM_UValidate/2 237 237 2950297 499.0GB/s jpg [+24.9%] |
| BM_UValidate/3 14610 14611 47901 6.0GB/s pdf [+26.8%] |
| BM_UValidate/4 171973 171990 4071 2.2GB/s html4 [+25.7%] |
| |
| |
| |
| ------------------------------------------------------------------------ |
| r37 | snappy.mirrorbot@gmail.com | 2011-05-17 10:48:25 +0200 (Tue, 17 May 2011) | 10 lines |
| |
| |
| Fix the numbering of the headlines in the Snappy format description. |
| |
| R=csilvers |
| DELTA=4 (0 added, 0 deleted, 4 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1906 |
| |
| ------------------------------------------------------------------------ |
| r36 | snappy.mirrorbot@gmail.com | 2011-05-16 10:59:18 +0200 (Mon, 16 May 2011) | 12 lines |
| |
| |
| Fix public issue #32: Add compressed format documentation for Snappy. |
| This text is new, but an earlier version from Zeev Tarantov was used |
| as reference. |
| |
| R=csilvers |
| DELTA=112 (111 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1867 |
| |
| ------------------------------------------------------------------------ |
| r35 | snappy.mirrorbot@gmail.com | 2011-05-09 23:29:02 +0200 (Mon, 09 May 2011) | 12 lines |
| |
| |
| Fix public issue #39: Pick out the median runs based on CPU time, |
| not real time. Also, use nth_element instead of sort, since we |
| only need one element. |
| |
| R=csilvers |
| DELTA=5 (3 added, 0 deleted, 2 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1799 |
| |
| ------------------------------------------------------------------------ |
| r34 | snappy.mirrorbot@gmail.com | 2011-05-09 23:28:45 +0200 (Mon, 09 May 2011) | 19 lines |
| |
| |
| Fix public issue #38: Make the microbenchmark framework handle |
| properly cases where gettimeofday() can stand return the same |
| result twice (as sometimes on GNU/Hurd) or go backwards |
| (as when the user adjusts the clock). We avoid a division-by-zero, |
| and put a lower bound on the number of iterations -- the same |
| amount as we use to calibrate. |
| |
| We should probably use CLOCK_MONOTONIC for platforms that support |
| it, to be robust against clock adjustments; we already use Windows' |
| monotonic timers. However, that's for a later changelist. |
| |
| R=csilvers |
| DELTA=7 (5 added, 0 deleted, 2 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1798 |
| |
| ------------------------------------------------------------------------ |
| r33 | snappy.mirrorbot@gmail.com | 2011-05-04 01:22:52 +0200 (Wed, 04 May 2011) | 11 lines |
| |
| |
| Fix public issue #37: Only link snappy_unittest against -lz and other autodetected |
| libraries, not libsnappy.so (which doesn't need any such dependency). |
| |
| R=csilvers |
| DELTA=20 (14 added, 0 deleted, 6 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1710 |
| |
| ------------------------------------------------------------------------ |
| r32 | snappy.mirrorbot@gmail.com | 2011-05-04 01:22:33 +0200 (Wed, 04 May 2011) | 11 lines |
| |
| |
| Release Snappy 1.0.2, to get the license change and various other fixes into |
| a release. |
| |
| R=csilvers |
| DELTA=239 (236 added, 0 deleted, 3 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1709 |
| |
| ------------------------------------------------------------------------ |
| r31 | snappy.mirrorbot@gmail.com | 2011-04-26 14:34:55 +0200 (Tue, 26 Apr 2011) | 15 lines |
| |
| |
| Fix public issue #30: Stop using gettimeofday() altogether on Win32, |
| as MSVC doesn't include it. Replace with QueryPerformanceCounter(), |
| which is monotonic and probably reasonably high-resolution. |
| (Some machines have traditionally had bugs in QPC, but they should |
| be relatively rare these days, and there's really no much better |
| alternative that I know of.) |
| |
| R=csilvers |
| DELTA=74 (55 added, 19 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1556 |
| |
| ------------------------------------------------------------------------ |
| r30 | snappy.mirrorbot@gmail.com | 2011-04-26 14:34:37 +0200 (Tue, 26 Apr 2011) | 11 lines |
| |
| |
| Fix public issue #31: Don't reset PATH in autogen.sh; instead, do the trickery |
| we need for our own build system internally. |
| |
| R=csilvers |
| DELTA=16 (13 added, 1 deleted, 2 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1555 |
| |
| ------------------------------------------------------------------------ |
| r29 | snappy.mirrorbot@gmail.com | 2011-04-16 00:55:56 +0200 (Sat, 16 Apr 2011) | 12 lines |
| |
| |
| When including <windows.h>, define WIN32_LEAN_AND_MEAN first, |
| so we won't pull in macro definitions of things like min() and max(), |
| which can conflict with <algorithm>. |
| |
| R=csilvers |
| DELTA=1 (1 added, 0 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1485 |
| |
| ------------------------------------------------------------------------ |
| r28 | snappy.mirrorbot@gmail.com | 2011-04-11 11:07:01 +0200 (Mon, 11 Apr 2011) | 15 lines |
| |
| |
| Fix public issue #29: Write CPU timing code for Windows, based on GetProcessTimes() |
| instead of getursage(). |
| |
| I thought I'd already committed this patch, so that the 1.0.1 release already |
| would have a Windows-compatible snappy_unittest, but I'd seemingly deleted it |
| instead, so this is a reconstruction. |
| |
| R=csilvers |
| DELTA=43 (39 added, 3 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1295 |
| |
| ------------------------------------------------------------------------ |
| r27 | snappy.mirrorbot@gmail.com | 2011-04-08 11:51:53 +0200 (Fri, 08 Apr 2011) | 22 lines |
| |
| |
| Include C bindings of Snappy, contributed by Martin Gieseking. |
| |
| I've made a few changes since Martin's version; mostly style nits, but also |
| a semantic change -- most functions that return bool in the C++ version now |
| return an enum, to better match typical C (and zlib) semantics. |
| |
| I've kept the copyright notice, since Martin is obviously the author here; |
| he has signed the contributor license agreement, though, so this should not |
| hinder Google's use in the future. |
| |
| We'll need to update the libtool version number to match the added interface, |
| but as of http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html |
| I'm going to wait until public release. |
| |
| R=csilvers |
| DELTA=238 (233 added, 0 deleted, 5 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1294 |
| |
| ------------------------------------------------------------------------ |
| r26 | snappy.mirrorbot@gmail.com | 2011-04-07 18:36:43 +0200 (Thu, 07 Apr 2011) | 13 lines |
| |
| |
| Replace geo.protodata with a newer version. |
| |
| The data compresses/decompresses slightly faster than the old data, and has |
| similar density. |
| |
| R=lookingbill |
| DELTA=1 (0 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1288 |
| |
| ------------------------------------------------------------------------ |
| r25 | snappy.mirrorbot@gmail.com | 2011-03-30 22:27:53 +0200 (Wed, 30 Mar 2011) | 12 lines |
| |
| |
| Fix public issue #27: Add HAVE_CONFIG_H tests around the config.h |
| inclusion in snappy-stubs-internal.h, which eases compiling outside the |
| automake/autoconf framework. |
| |
| R=csilvers |
| DELTA=5 (4 added, 1 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1152 |
| |
| ------------------------------------------------------------------------ |
| r24 | snappy.mirrorbot@gmail.com | 2011-03-30 22:27:39 +0200 (Wed, 30 Mar 2011) | 13 lines |
| |
| |
| Fix public issue #26: Take memory allocation and reallocation entirely out of the |
| Measure() loop. This gives all algorithms a small speed boost, except Snappy which |
| already didn't do reallocation (so the measurements were slightly biased in its |
| favor). |
| |
| R=csilvers |
| DELTA=92 (69 added, 9 deleted, 14 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1151 |
| |
| ------------------------------------------------------------------------ |
| r23 | snappy.mirrorbot@gmail.com | 2011-03-30 22:25:09 +0200 (Wed, 30 Mar 2011) | 18 lines |
| |
| |
| Renamed "namespace zippy" to "namespace snappy" to reduce |
| the differences from the opensource code. Will make it easier |
| in the future to mix-and-match third-party code that uses |
| snappy with google code. |
| |
| Currently, csearch shows that the only external user of |
| "namespace zippy" is some bigtable code that accesses |
| a TEST variable, which is temporarily kept in the zippy |
| namespace. |
| |
| R=sesse |
| DELTA=123 (18 added, 3 deleted, 102 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1150 |
| |
| ------------------------------------------------------------------------ |
| r22 | snappy.mirrorbot@gmail.com | 2011-03-29 00:17:04 +0200 (Tue, 29 Mar 2011) | 11 lines |
| |
| |
| Put back the final few lines of what was truncated during the |
| license header change. |
| |
| R=csilvers |
| DELTA=5 (4 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1094 |
| |
| ------------------------------------------------------------------------ |
| r21 | snappy.mirrorbot@gmail.com | 2011-03-26 03:34:34 +0100 (Sat, 26 Mar 2011) | 20 lines |
| |
| |
| Change on 2011-03-25 19:18:00-07:00 by sesse |
| |
| Replace the Apache 2.0 license header by the BSD-type license header; |
| somehow a lot of the files were missed in the last round. |
| |
| R=dannyb,csilvers |
| DELTA=147 (74 added, 2 deleted, 71 changed) |
| |
| Change on 2011-03-25 19:25:07-07:00 by sesse |
| |
| Unbreak the build; the relicensing removed a bit too much (only comments |
| were intended, but I also accidentially removed some of the top lines of |
| the actual source). |
| |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1072 |
| |
| ------------------------------------------------------------------------ |
| r20 | snappy.mirrorbot@gmail.com | 2011-03-25 17:14:41 +0100 (Fri, 25 Mar 2011) | 10 lines |
| |
| |
| Change Snappy from the Apache 2.0 to a BSD-type license. |
| |
| R=dannyb |
| DELTA=328 (80 added, 184 deleted, 64 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1061 |
| |
| ------------------------------------------------------------------------ |
| r19 | snappy.mirrorbot@gmail.com | 2011-03-25 01:39:01 +0100 (Fri, 25 Mar 2011) | 11 lines |
| |
| |
| Release Snappy 1.0.1, to soup up all the various small changes |
| that have been made since release. |
| |
| R=csilvers |
| DELTA=266 (260 added, 0 deleted, 6 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1057 |
| |
| ------------------------------------------------------------------------ |
| r18 | snappy.mirrorbot@gmail.com | 2011-03-24 20:15:54 +0100 (Thu, 24 Mar 2011) | 11 lines |
| |
| |
| Fix a microbenchmark crash on mingw32; seemingly %lld is not universally |
| supported on Windows, and %I64d is recommended instead. |
| |
| R=csilvers |
| DELTA=6 (5 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1034 |
| |
| ------------------------------------------------------------------------ |
| r17 | snappy.mirrorbot@gmail.com | 2011-03-24 20:15:27 +0100 (Thu, 24 Mar 2011) | 13 lines |
| |
| |
| Fix public issue #19: Fix unit test when Google Test is installed but the |
| gflags package isn't (Google Test is not properly initialized). |
| |
| Patch by Martin Gieseking. |
| |
| R=csilvers |
| DELTA=2 (1 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1033 |
| |
| ------------------------------------------------------------------------ |
| r16 | snappy.mirrorbot@gmail.com | 2011-03-24 20:13:57 +0100 (Thu, 24 Mar 2011) | 15 lines |
| |
| |
| Make the unit test work on systems without mmap(). This is required for, |
| among others, Windows support. For Windows in specific, we could have used |
| CreateFileMapping/MapViewOfFile, but this should at least get us a bit closer |
| to compiling, and is of course also relevant for embedded systems with no MMU. |
| |
| (Part 2/2) |
| |
| R=csilvers |
| DELTA=15 (12 added, 3 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1032 |
| |
| ------------------------------------------------------------------------ |
| r15 | snappy.mirrorbot@gmail.com | 2011-03-24 20:12:27 +0100 (Thu, 24 Mar 2011) | 15 lines |
| |
| |
| Make the unit test work on systems without mmap(). This is required for, |
| among others, Windows support. For Windows in specific, we could have used |
| CreateFileMapping/MapViewOfFile, but this should at least get us a bit closer |
| to compiling, and is of course also relevant for embedded systems with no MMU. |
| |
| (Part 1/2) |
| |
| R=csilvers |
| DELTA=9 (8 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1031 |
| |
| ------------------------------------------------------------------------ |
| r14 | snappy.mirrorbot@gmail.com | 2011-03-24 00:17:36 +0100 (Thu, 24 Mar 2011) | 14 lines |
| |
| |
| Fix public issue #12: Don't keep autogenerated auto* files in Subversion; |
| it causes problems with others sending patches etc.. |
| |
| We can't get this 100% hermetic anyhow, due to files like lt~obsolete.m4, |
| so we can just as well go cleanly in the other direction. |
| |
| R=csilvers |
| DELTA=21038 (0 added, 21036 deleted, 2 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=1012 |
| |
| ------------------------------------------------------------------------ |
| r13 | snappy.mirrorbot@gmail.com | 2011-03-23 18:50:49 +0100 (Wed, 23 Mar 2011) | 11 lines |
| |
| |
| Fix public issue tracker bug #3: Call AC_SUBST([LIBTOOL_DEPS]), or the rule |
| to rebuild libtool in Makefile.am won't work. |
| |
| R=csilvers |
| DELTA=1 (1 added, 0 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=997 |
| |
| ------------------------------------------------------------------------ |
| r12 | snappy.mirrorbot@gmail.com | 2011-03-23 12:16:39 +0100 (Wed, 23 Mar 2011) | 11 lines |
| |
| |
| Fix public issue #10: Don't add GTEST_CPPFLAGS to snappy_unittest_CXXFLAGS; |
| it's not needed (CPPFLAGS are always included when compiling). |
| |
| R=csilvers |
| DELTA=1 (0 added, 1 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=994 |
| |
| ------------------------------------------------------------------------ |
| r11 | snappy.mirrorbot@gmail.com | 2011-03-23 12:16:18 +0100 (Wed, 23 Mar 2011) | 11 lines |
| |
| |
| Fix public issue #9: Add -Wall -Werror to automake flags. |
| (This concerns automake itself, not the C++ compiler.) |
| |
| R=csilvers |
| DELTA=4 (3 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=993 |
| |
| ------------------------------------------------------------------------ |
| r10 | snappy.mirrorbot@gmail.com | 2011-03-23 12:13:37 +0100 (Wed, 23 Mar 2011) | 10 lines |
| |
| |
| Fix a typo in the Snappy README file. |
| |
| R=csilvers |
| DELTA=1 (0 added, 0 deleted, 1 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=992 |
| |
| ------------------------------------------------------------------------ |
| r9 | snappy.mirrorbot@gmail.com | 2011-03-23 12:13:13 +0100 (Wed, 23 Mar 2011) | 11 lines |
| |
| |
| Fix public issue #6: Add a --with-gflags for disabling gflags autodetection |
| and using a manually given setting (use/don't use) instead. |
| |
| R=csilvers |
| DELTA=16 (13 added, 0 deleted, 3 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=991 |
| |
| ------------------------------------------------------------------------ |
| r8 | snappy.mirrorbot@gmail.com | 2011-03-23 12:12:44 +0100 (Wed, 23 Mar 2011) | 12 lines |
| |
| |
| Fix public issue #5: Replace the EXTRA_LIBSNAPPY_LDFLAGS setup with something |
| slightly more standard, that also doesn't leak libtool command-line into |
| configure.ac. |
| |
| R=csilvers |
| DELTA=7 (0 added, 4 deleted, 3 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=990 |
| |
| ------------------------------------------------------------------------ |
| r7 | snappy.mirrorbot@gmail.com | 2011-03-23 12:12:22 +0100 (Wed, 23 Mar 2011) | 10 lines |
| |
| |
| Fix public issue #4: Properly quote all macro arguments in configure.ac. |
| |
| R=csilvers |
| DELTA=16 (0 added, 0 deleted, 16 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=989 |
| |
| ------------------------------------------------------------------------ |
| r6 | snappy.mirrorbot@gmail.com | 2011-03-23 12:11:54 +0100 (Wed, 23 Mar 2011) | 11 lines |
| |
| |
| Fix public issue #7: Don't use internal variables named ac_*, as those belong |
| to autoconf's namespace. |
| |
| R=csilvers |
| DELTA=6 (0 added, 0 deleted, 6 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=988 |
| |
| ------------------------------------------------------------------------ |
| r5 | snappy.mirrorbot@gmail.com | 2011-03-23 12:11:09 +0100 (Wed, 23 Mar 2011) | 10 lines |
| |
| |
| Add missing licensing headers to a few files. (Part 2/2.) |
| |
| R=csilvers |
| DELTA=12 (12 added, 0 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=987 |
| |
| ------------------------------------------------------------------------ |
| r4 | snappy.mirrorbot@gmail.com | 2011-03-23 12:10:39 +0100 (Wed, 23 Mar 2011) | 10 lines |
| |
| |
| Add mising licensing headers to a few files. (Part 1/2.) |
| |
| R=csilvers |
| DELTA=24 (24 added, 0 deleted, 0 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=986 |
| |
| ------------------------------------------------------------------------ |
| r3 | snappy.mirrorbot@gmail.com | 2011-03-23 12:10:04 +0100 (Wed, 23 Mar 2011) | 11 lines |
| |
| |
| Use the correct license file for the Apache 2.0 license; |
| spotted by Florian Weimer. |
| |
| R=csilvers |
| DELTA=202 (174 added, 0 deleted, 28 changed) |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION=985 |
| |
| ------------------------------------------------------------------------ |
| r2 | snappy.mirrorbot@gmail.com | 2011-03-18 18:14:15 +0100 (Fri, 18 Mar 2011) | 6 lines |
| |
| |
| |
| |
| Revision created by MOE tool push_codebase. |
| MOE_MIGRATION= |
| |
| ------------------------------------------------------------------------ |
| r1 | sesse@google.com | 2011-03-18 18:13:52 +0100 (Fri, 18 Mar 2011) | 2 lines |
| |
| Create trunk directory. |
| |
| ------------------------------------------------------------------------ |
