| #!/bin/sh |
| # |
| # Build a fat binary on Mac OS X, thanks Ryan! |
| |
| # Number of CPUs (for make -j) |
| NCPU=`sysctl -n hw.ncpu` |
| NJOB=$NCPU |
| #NJOB=`expr $NCPU + 1` |
| |
| # Generic, cross-platform CFLAGS you always want go here. |
| CFLAGS="-O3 -g -pipe" |
| |
| # Locate Xcode SDK path |
| SDK_PATH=/Developer/SDKs |
| if [ ! -d $SDK_PATH ]; then |
| echo "Couldn't find SDK path" |
| exit 1 |
| fi |
| |
| # See if we can use 10.2 or 10.3 runtime compatibility |
| if [ -d "$SDK_PATH/MacOSX10.2.8.sdk" ]; then |
| # PowerPC configure flags (10.2 runtime compatibility) |
| # We dynamically load X11, so using the system X11 headers is fine. |
| CONFIG_PPC="--build=`uname -p`-apple-darwin --host=powerpc-apple-darwin \ |
| --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib" |
| |
| # PowerPC compiler flags |
| CC_PPC="gcc-3.3 -arch ppc" |
| CXX_PPC="g++-3.3 -arch ppc" |
| CFLAGS_PPC="" |
| CPPFLAGS_PPC="-DMAC_OS_X_VERSION_MIN_REQUIRED=1020 \ |
| -nostdinc \ |
| -F$SDK_PATH/MacOSX10.2.8.sdk/System/Library/Frameworks \ |
| -I$SDK_PATH/MacOSX10.2.8.sdk/usr/include/gcc/darwin/3.3 \ |
| -isystem $SDK_PATH/MacOSX10.2.8.sdk/usr/include" |
| |
| # PowerPC linker flags |
| LFLAGS_PPC="-Wl,-headerpad_max_install_names -arch ppc \ |
| -L$SDK_PATH/MacOSX10.2.8.sdk/usr/lib/gcc/darwin/3.3 \ |
| -F$SDK_PATH/MacOSX10.2.8.sdk/System/Library/Frameworks \ |
| -Wl,-syslibroot,$SDK_PATH/MacOSX10.2.8.sdk" |
| |
| else # 10.2 or 10.3 SDK |
| |
| # PowerPC configure flags (10.3 runtime compatibility) |
| # We dynamically load X11, so using the system X11 headers is fine. |
| CONFIG_PPC="--build=`uname -p`-apple-darwin --host=powerpc-apple-darwin \ |
| --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib" |
| |
| # PowerPC compiler flags |
| CC_PPC="gcc-4.0 -arch ppc" |
| CXX_PPC="g++-4.0 -arch ppc" |
| CFLAGS_PPC="" |
| CPPFLAGS_PPC="-DMAC_OS_X_VERSION_MIN_REQUIRED=1030 \ |
| -nostdinc \ |
| -F$SDK_PATH/MacOSX10.3.9.sdk/System/Library/Frameworks \ |
| -I$SDK_PATH/MacOSX10.3.9.sdk/usr/lib/gcc/powerpc-apple-darwin9/4.0.1/include \ |
| -isystem $SDK_PATH/MacOSX10.3.9.sdk/usr/include" |
| |
| # PowerPC linker flags |
| LFLAGS_PPC="-Wl,-headerpad_max_install_names -arch ppc -mmacosx-version-min=10.3 \ |
| -L$SDK_PATH/MacOSX10.3.9.sdk/usr/lib/gcc/powerpc-apple-darwin9/4.0.1 \ |
| -F$SDK_PATH/MacOSX10.3.9.sdk/System/Library/Frameworks \ |
| -Wl,-syslibroot,$SDK_PATH/MacOSX10.3.9.sdk" |
| |
| fi # 10.2 or 10.3 SDK |
| |
| # Intel configure flags (10.4 runtime compatibility) |
| # We dynamically load X11, so using the system X11 headers is fine. |
| CONFIG_X86="--build=`uname -p`-apple-darwin --host=i386-apple-darwin \ |
| --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib" |
| |
| # Intel compiler flags |
| CC_X86="gcc-4.0 -arch i386" |
| CXX_X86="g++-4.0 -arch i386" |
| CFLAGS_X86="-mmacosx-version-min=10.4" |
| CPPFLAGS_X86="-DMAC_OS_X_VERSION_MIN_REQUIRED=1040 \ |
| -nostdinc \ |
| -F$SDK_PATH/MacOSX10.4u.sdk/System/Library/Frameworks \ |
| -I$SDK_PATH/MacOSX10.4u.sdk/usr/lib/gcc/i686-apple-darwin9/4.0.1/include \ |
| -isystem $SDK_PATH/MacOSX10.4u.sdk/usr/include" |
| |
| # Intel linker flags |
| LFLAGS_X86="-Wl,-headerpad_max_install_names -arch i386 -mmacosx-version-min=10.4 \ |
| -L$SDK_PATH/MacOSX10.4u.sdk/usr/lib/gcc/i686-apple-darwin9/4.0.1 \ |
| -Wl,-syslibroot,$SDK_PATH/MacOSX10.4u.sdk" |
| |
| # |
| # Find the configure script |
| # |
| srcdir=`dirname $0`/.. |
| auxdir=$srcdir/build-scripts |
| cd $srcdir |
| |
| # |
| # Figure out which phase to build: |
| # all, |
| # configure, configure-ppc, configure-x86, |
| # make, make-ppc, make-x86, merge |
| # install |
| # clean |
| if test x"$1" = x; then |
| phase=all |
| else |
| phase="$1" |
| fi |
| case $phase in |
| all) |
| configure_ppc="yes" |
| configure_x86="yes" |
| make_ppc="yes" |
| make_x86="yes" |
| merge="yes" |
| ;; |
| configure) |
| configure_ppc="yes" |
| configure_x86="yes" |
| ;; |
| configure-ppc) |
| configure_ppc="yes" |
| ;; |
| configure-x86) |
| configure_x86="yes" |
| ;; |
| make) |
| make_ppc="yes" |
| make_x86="yes" |
| merge="yes" |
| ;; |
| make-ppc) |
| make_ppc="yes" |
| ;; |
| make-x86) |
| make_x86="yes" |
| ;; |
| merge) |
| merge="yes" |
| ;; |
| install) |
| install_bin="yes" |
| install_hdrs="yes" |
| install_lib="yes" |
| install_data="yes" |
| install_man="yes" |
| ;; |
| install-bin) |
| install_bin="yes" |
| ;; |
| install-hdrs) |
| install_hdrs="yes" |
| ;; |
| install-lib) |
| install_lib="yes" |
| ;; |
| install-data) |
| install_data="yes" |
| ;; |
| install-man) |
| install_man="yes" |
| ;; |
| clean) |
| clean_ppc="yes" |
| clean_x86="yes" |
| ;; |
| clean-ppc) |
| clean_ppc="yes" |
| ;; |
| clean-x86) |
| clean_x86="yes" |
| ;; |
| *) |
| echo "Usage: $0 [all|configure[-ppc|-x86]|make[-ppc|-x86]|merge|install|clean]" |
| exit 1 |
| ;; |
| esac |
| case `uname -p` in |
| powerpc) |
| native_path=ppc |
| ;; |
| *86) |
| native_path=x86 |
| ;; |
| *) |
| echo "Couldn't figure out native architecture path" |
| exit 1 |
| ;; |
| esac |
| |
| # |
| # Create the build directories |
| # |
| for dir in build build/ppc build/x86; do |
| if test -d $dir; then |
| : |
| else |
| mkdir $dir || exit 1 |
| fi |
| done |
| |
| # |
| # Build the PowerPC binary |
| # |
| if test x$configure_ppc = xyes; then |
| (cd build/ppc && \ |
| sh ../../configure $CONFIG_PPC CC="$CC_PPC" CXX="$CXX_PPC" CFLAGS="$CFLAGS $CFLAGS_PPC" CPPFLAGS="$CPPFLAGS_PPC" LDFLAGS="$LFLAGS_PPC") || exit 2 |
| fi |
| if test x$make_ppc = xyes; then |
| (cd build/ppc && ls include && make -j$NJOB) || exit 3 |
| fi |
| |
| # |
| # Build the Intel binary |
| # |
| if test x$configure_x86 = xyes; then |
| (cd build/x86 && \ |
| sh ../../configure $CONFIG_X86 CC="$CC_X86" CXX="$CXX_X86" CFLAGS="$CFLAGS $CFLAGS_X86" CPPFLAGS="$CPPFLAGS_X86" LDFLAGS="$LFLAGS_X86") || exit 2 |
| fi |
| if test x$make_x86 = xyes; then |
| (cd build/x86 && make -j$NJOB) || exit 3 |
| fi |
| |
| # |
| # Combine into fat binary |
| # |
| if test x$merge = xyes; then |
| output=.libs |
| sh $auxdir/mkinstalldirs build/$output |
| cd build |
| target=`find . -mindepth 3 -type f -name '*.dylib' | head -1 | sed 's|.*/||'` |
| (lipo -create -o $output/$target `find . -mindepth 3 -type f -name "*.dylib"` && |
| ln -sf $target $output/libSDL-1.2.0.dylib && |
| ln -sf $target $output/libSDL.dylib && |
| lipo -create -o $output/libSDL.a */build/.libs/libSDL.a && |
| cp $native_path/build/.libs/libSDL.la $output && |
| cp $native_path/build/.libs/libSDL.lai $output && |
| cp $native_path/build/libSDL.la . && |
| lipo -create -o libSDLmain.a */build/libSDLmain.a && |
| echo "Build complete!" && |
| echo "Files can be found in the build directory.") || exit 4 |
| cd .. |
| fi |
| |
| # |
| # Install |
| # |
| do_install() |
| { |
| echo $* |
| $* || exit 5 |
| } |
| if test x$prefix = x; then |
| prefix=/usr/local |
| fi |
| if test x$exec_prefix = x; then |
| exec_prefix=$prefix |
| fi |
| if test x$bindir = x; then |
| bindir=$exec_prefix/bin |
| fi |
| if test x$libdir = x; then |
| libdir=$exec_prefix/lib |
| fi |
| if test x$includedir = x; then |
| includedir=$prefix/include |
| fi |
| if test x$datadir = x; then |
| datadir=$prefix/share |
| fi |
| if test x$mandir = x; then |
| mandir=$prefix/man |
| fi |
| if test x$install_bin = xyes; then |
| do_install sh $auxdir/mkinstalldirs $bindir |
| do_install /usr/bin/install -c -m 755 build/$native_path/sdl-config $bindir/sdl-config |
| fi |
| if test x$install_hdrs = xyes; then |
| do_install sh $auxdir/mkinstalldirs $includedir/SDL |
| for src in $srcdir/include/*.h; do \ |
| file=`echo $src | sed -e 's|^.*/||'`; \ |
| do_install /usr/bin/install -c -m 644 $src $includedir/SDL/$file; \ |
| done |
| do_install /usr/bin/install -c -m 644 $srcdir/include/SDL_config_macosx.h $includedir/SDL/SDL_config.h |
| fi |
| if test x$install_lib = xyes; then |
| do_install sh $auxdir/mkinstalldirs $libdir |
| do_install sh build/$native_path/libtool --mode=install /usr/bin/install -c build/libSDL.la $libdir/libSDL.la |
| do_install /usr/bin/install -c -m 644 build/libSDLmain.a $libdir/libSDLmain.a |
| do_install ranlib $libdir/libSDLmain.a |
| fi |
| if test x$install_data = xyes; then |
| do_install sh $auxdir/mkinstalldirs $datadir/aclocal |
| do_install /usr/bin/install -c -m 644 $srcdir/sdl.m4 $datadir/aclocal/sdl.m4 |
| fi |
| if test x$install_man = xyes; then |
| do_install sh $auxdir/mkinstalldirs $mandir/man3 |
| for src in $srcdir/docs/man3/*.3; do \ |
| file=`echo $src | sed -e 's|^.*/||'`; \ |
| do_install /usr/bin/install -c -m 644 $src $mandir/man3/$file; \ |
| done |
| fi |
| |
| # |
| # Clean up |
| # |
| do_clean() |
| { |
| echo $* |
| $* || exit 6 |
| } |
| if test x$clean_x86 = xyes; then |
| do_clean rm -r build/x86 |
| fi |
| if test x$clean_ppc = xyes; then |
| do_clean rm -r build/ppc |
| fi |
| |