blob: 7e2d9d63276ed4816289cefa7b1ed924a3d5a492 [file] [log] [blame]
/*
* Vectored Interrupt Controller for nios2 processor
*
* Copyright (c) 2022 Neuroblade
*
* Interface:
* QOM property "cpu": link to the Nios2 CPU (must be set)
* Unnamed GPIO inputs 0..NIOS2_VIC_MAX_IRQ-1: input IRQ lines
* IRQ should be connected to nios2 IRQ0.
*
* Reference: "Embedded Peripherals IP User Guide
* for Intel® Quartus® Prime Design Suite: 21.4"
* Chapter 38 "Vectored Interrupt Controller Core"
* See: https://www.intel.com/content/www/us/en/docs/programmable/683130/21-4/vectored-interrupt-controller-core.html
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "qemu/bitops.h"
#include "qemu/log.h"
#include "qom/object.h"
#include "hw/intc/nios2_vic.h"
#include "cpu.h"
enum {
INT_CONFIG0 = 0,
INT_CONFIG31 = 31,
INT_ENABLE = 32,
INT_ENABLE_SET = 33,
INT_ENABLE_CLR = 34,
INT_PENDING = 35,
INT_RAW_STATUS = 36,
SW_INTERRUPT = 37,
SW_INTERRUPT_SET = 38,
SW_INTERRUPT_CLR = 39,
VIC_CONFIG = 40,
VIC_STATUS = 41,
VEC_TBL_BASE = 42,
VEC_TBL_ADDR = 43,
CSR_COUNT /* Last! */
};
/* Requested interrupt level (INT_CONFIG[0:5]) */
static inline uint32_t vic_int_config_ril(const Nios2VIC *vic, int irq_num)
{
return extract32(vic->int_config[irq_num], 0, 6);
}
/* Requested NMI (INT_CONFIG[6]) */
static inline uint32_t vic_int_config_rnmi(const Nios2VIC *vic, int irq_num)
{
return extract32(vic->int_config[irq_num], 6, 1);
}
/* Requested register set (INT_CONFIG[7:12]) */
static inline uint32_t vic_int_config_rrs(const Nios2VIC *vic, int irq_num)
{
return extract32(vic->int_config[irq_num], 7, 6);
}
static inline uint32_t vic_config_vec_size(const Nios2VIC *vic)
{
return 1 << (2 + extract32(vic->vic_config, 0, 3));
}
static inline uint32_t vic_int_pending(const Nios2VIC *vic)
{
return (vic->int_raw_status | vic->sw_int) & vic->int_enable;
}
static void vic_update_irq(Nios2VIC *vic)
{
Nios2CPU *cpu = NIOS2_CPU(vic->cpu);
uint32_t pending = vic_int_pending(vic);
int irq = -1;
int max_ril = 0;
/* Note that if RIL is 0 for an interrupt it is effectively disabled */
vic->vec_tbl_addr = 0;
vic->vic_status = 0;
if (pending == 0) {
qemu_irq_lower(vic->output_int);
return;
}
for (int i = 0; i < NIOS2_VIC_MAX_IRQ; i++) {
if (pending & BIT(i)) {
int ril = vic_int_config_ril(vic, i);
if (ril > max_ril) {
irq = i;
max_ril = ril;
}
}
}
if (irq < 0) {
qemu_irq_lower(vic->output_int);
return;
}
vic->vec_tbl_addr = irq * vic_config_vec_size(vic) + vic->vec_tbl_base;
vic->vic_status = irq | BIT(31);
/*
* In hardware, the interface between the VIC and the CPU is via the
* External Interrupt Controller interface, where the interrupt controller
* presents the CPU with a packet of data containing:
* - Requested Handler Address (RHA): 32 bits
* - Requested Register Set (RRS) : 6 bits
* - Requested Interrupt Level (RIL) : 6 bits
* - Requested NMI flag (RNMI) : 1 bit
* In our emulation, we implement this by writing the data directly to
* fields in the CPU object and then raising the IRQ line to tell
* the CPU that we've done so.
*/
cpu->rha = vic->vec_tbl_addr;
cpu->ril = max_ril;
cpu->rrs = vic_int_config_rrs(vic, irq);
cpu->rnmi = vic_int_config_rnmi(vic, irq);
qemu_irq_raise(vic->output_int);
}
static void vic_set_irq(void *opaque, int irq_num, int level)
{
Nios2VIC *vic = opaque;
vic->int_raw_status = deposit32(vic->int_raw_status, irq_num, 1, !!level);
vic_update_irq(vic);
}
static void nios2_vic_reset(DeviceState *dev)
{
Nios2VIC *vic = NIOS2_VIC(dev);
memset(&vic->int_config, 0, sizeof(vic->int_config));
vic->vic_config = 0;
vic->int_raw_status = 0;
vic->int_enable = 0;
vic->sw_int = 0;
vic->vic_status = 0;
vic->vec_tbl_base = 0;
vic->vec_tbl_addr = 0;
}
static uint64_t nios2_vic_csr_read(void *opaque, hwaddr offset, unsigned size)
{
Nios2VIC *vic = opaque;
int index = offset / 4;
switch (index) {
case INT_CONFIG0 ... INT_CONFIG31:
return vic->int_config[index - INT_CONFIG0];
case INT_ENABLE:
return vic->int_enable;
case INT_PENDING:
return vic_int_pending(vic);
case INT_RAW_STATUS:
return vic->int_raw_status;
case SW_INTERRUPT:
return vic->sw_int;
case VIC_CONFIG:
return vic->vic_config;
case VIC_STATUS:
return vic->vic_status;
case VEC_TBL_BASE:
return vic->vec_tbl_base;
case VEC_TBL_ADDR:
return vic->vec_tbl_addr;
default:
return 0;
}
}
static void nios2_vic_csr_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
Nios2VIC *vic = opaque;
int index = offset / 4;
switch (index) {
case INT_CONFIG0 ... INT_CONFIG31:
vic->int_config[index - INT_CONFIG0] = value;
break;
case INT_ENABLE:
vic->int_enable = value;
break;
case INT_ENABLE_SET:
vic->int_enable |= value;
break;
case INT_ENABLE_CLR:
vic->int_enable &= ~value;
break;
case SW_INTERRUPT:
vic->sw_int = value;
break;
case SW_INTERRUPT_SET:
vic->sw_int |= value;
break;
case SW_INTERRUPT_CLR:
vic->sw_int &= ~value;
break;
case VIC_CONFIG:
vic->vic_config = value;
break;
case VEC_TBL_BASE:
vic->vec_tbl_base = value;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"nios2-vic: write to invalid CSR address %#"
HWADDR_PRIx "\n", offset);
}
vic_update_irq(vic);
}
static const MemoryRegionOps nios2_vic_csr_ops = {
.read = nios2_vic_csr_read,
.write = nios2_vic_csr_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = { .min_access_size = 4, .max_access_size = 4 }
};
static void nios2_vic_realize(DeviceState *dev, Error **errp)
{
Nios2VIC *vic = NIOS2_VIC(dev);
if (!vic->cpu) {
/* This is a programming error in the code using this device */
error_setg(errp, "nios2-vic 'cpu' link property was not set");
return;
}
sysbus_init_irq(SYS_BUS_DEVICE(dev), &vic->output_int);
qdev_init_gpio_in(dev, vic_set_irq, NIOS2_VIC_MAX_IRQ);
memory_region_init_io(&vic->csr, OBJECT(dev), &nios2_vic_csr_ops, vic,
"nios2.vic.csr", CSR_COUNT * sizeof(uint32_t));
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &vic->csr);
}
static Property nios2_vic_properties[] = {
DEFINE_PROP_LINK("cpu", Nios2VIC, cpu, TYPE_CPU, CPUState *),
DEFINE_PROP_END_OF_LIST()
};
static const VMStateDescription nios2_vic_vmstate = {
.name = "nios2-vic",
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]){
VMSTATE_UINT32_ARRAY(int_config, Nios2VIC, 32),
VMSTATE_UINT32(vic_config, Nios2VIC),
VMSTATE_UINT32(int_raw_status, Nios2VIC),
VMSTATE_UINT32(int_enable, Nios2VIC),
VMSTATE_UINT32(sw_int, Nios2VIC),
VMSTATE_UINT32(vic_status, Nios2VIC),
VMSTATE_UINT32(vec_tbl_base, Nios2VIC),
VMSTATE_UINT32(vec_tbl_addr, Nios2VIC),
VMSTATE_END_OF_LIST()
},
};
static void nios2_vic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = nios2_vic_reset;
dc->realize = nios2_vic_realize;
dc->vmsd = &nios2_vic_vmstate;
device_class_set_props(dc, nios2_vic_properties);
}
static const TypeInfo nios2_vic_info = {
.name = TYPE_NIOS2_VIC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(Nios2VIC),
.class_init = nios2_vic_class_init,
};
static void nios2_vic_register_types(void)
{
type_register_static(&nios2_vic_info);
}
type_init(nios2_vic_register_types);