blob: da5fb310890ec5c2751ec77e336a079811e23d18 [file] [log] [blame]
/*
* QEMU System Emulator block driver
*
* Copyright (c) 2003 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef BLOCK_INT_GLOBAL_STATE_H
#define BLOCK_INT_GLOBAL_STATE_H
#include "block/blockjob.h"
#include "block/block_int-common.h"
#include "qemu/hbitmap.h"
#include "qemu/main-loop.h"
/*
* Global state (GS) API. These functions run under the BQL.
*
* See include/block/block-global-state.h for more information about
* the GS API.
*/
/**
* stream_start:
* @job_id: The id of the newly-created job, or %NULL to use the
* device name of @bs.
* @bs: Block device to operate on.
* @base: Block device that will become the new base, or %NULL to
* flatten the whole backing file chain onto @bs.
* @backing_file_str: The file name that will be written to @bs as the
* the new backing file if the job completes. Ignored if @base is %NULL.
* @creation_flags: Flags that control the behavior of the Job lifetime.
* See @BlockJobCreateFlags
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @on_error: The action to take upon error.
* @filter_node_name: The node name that should be assigned to the filter
* driver that the stream job inserts into the graph above
* @bs. NULL means that a node name should be autogenerated.
* @errp: Error object.
*
* Start a streaming operation on @bs. Clusters that are unallocated
* in @bs, but allocated in any image between @base and @bs (both
* exclusive) will be written to @bs. At the end of a successful
* streaming job, the backing file of @bs will be changed to
* @backing_file_str in the written image and to @base in the live
* BlockDriverState.
*/
void stream_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *base, const char *backing_file_str,
BlockDriverState *bottom,
int creation_flags, int64_t speed,
BlockdevOnError on_error,
const char *filter_node_name,
Error **errp);
/**
* commit_start:
* @job_id: The id of the newly-created job, or %NULL to use the
* device name of @bs.
* @bs: Active block device.
* @top: Top block device to be committed.
* @base: Block device that will be written into, and become the new top.
* @creation_flags: Flags that control the behavior of the Job lifetime.
* See @BlockJobCreateFlags
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @on_error: The action to take upon error.
* @backing_file_str: String to use as the backing file in @top's overlay
* @filter_node_name: The node name that should be assigned to the filter
* driver that the commit job inserts into the graph above @top. NULL means
* that a node name should be autogenerated.
* @errp: Error object.
*
*/
void commit_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *base, BlockDriverState *top,
int creation_flags, int64_t speed,
BlockdevOnError on_error, const char *backing_file_str,
const char *filter_node_name, Error **errp);
/**
* commit_active_start:
* @job_id: The id of the newly-created job, or %NULL to use the
* device name of @bs.
* @bs: Active block device to be committed.
* @base: Block device that will be written into, and become the new top.
* @creation_flags: Flags that control the behavior of the Job lifetime.
* See @BlockJobCreateFlags
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @on_error: The action to take upon error.
* @filter_node_name: The node name that should be assigned to the filter
* driver that the commit job inserts into the graph above @bs. NULL means that
* a node name should be autogenerated.
* @cb: Completion function for the job.
* @opaque: Opaque pointer value passed to @cb.
* @auto_complete: Auto complete the job.
* @errp: Error object.
*
*/
BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *base, int creation_flags,
int64_t speed, BlockdevOnError on_error,
const char *filter_node_name,
BlockCompletionFunc *cb, void *opaque,
bool auto_complete, Error **errp);
/*
* mirror_start:
* @job_id: The id of the newly-created job, or %NULL to use the
* device name of @bs.
* @bs: Block device to operate on.
* @target: Block device to write to.
* @replaces: Block graph node name to replace once the mirror is done. Can
* only be used when full mirroring is selected.
* @creation_flags: Flags that control the behavior of the Job lifetime.
* See @BlockJobCreateFlags
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @granularity: The chosen granularity for the dirty bitmap.
* @buf_size: The amount of data that can be in flight at one time.
* @mode: Whether to collapse all images in the chain to the target.
* @backing_mode: How to establish the target's backing chain after completion.
* @zero_target: Whether the target should be explicitly zero-initialized
* @on_source_error: The action to take upon error reading from the source.
* @on_target_error: The action to take upon error writing to the target.
* @unmap: Whether to unmap target where source sectors only contain zeroes.
* @filter_node_name: The node name that should be assigned to the filter
* driver that the mirror job inserts into the graph above @bs. NULL means that
* a node name should be autogenerated.
* @copy_mode: When to trigger writes to the target.
* @errp: Error object.
*
* Start a mirroring operation on @bs. Clusters that are allocated
* in @bs will be written to @target until the job is cancelled or
* manually completed. At the end of a successful mirroring job,
* @bs will be switched to read from @target.
*/
void mirror_start(const char *job_id, BlockDriverState *bs,
BlockDriverState *target, const char *replaces,
int creation_flags, int64_t speed,
uint32_t granularity, int64_t buf_size,
MirrorSyncMode mode, BlockMirrorBackingMode backing_mode,
bool zero_target,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
bool unmap, const char *filter_node_name,
MirrorCopyMode copy_mode, Error **errp);
/*
* backup_job_create:
* @job_id: The id of the newly-created job, or %NULL to use the
* device name of @bs.
* @bs: Block device to operate on.
* @target: Block device to write to.
* @speed: The maximum speed, in bytes per second, or 0 for unlimited.
* @sync_mode: What parts of the disk image should be copied to the destination.
* @sync_bitmap: The dirty bitmap if sync_mode is 'bitmap' or 'incremental'
* @bitmap_mode: The bitmap synchronization policy to use.
* @perf: Performance options. All actual fields assumed to be present,
* all ".has_*" fields are ignored.
* @on_source_error: The action to take upon error reading from the source.
* @on_target_error: The action to take upon error writing to the target.
* @creation_flags: Flags that control the behavior of the Job lifetime.
* See @BlockJobCreateFlags
* @cb: Completion function for the job.
* @opaque: Opaque pointer value passed to @cb.
* @txn: Transaction that this job is part of (may be NULL).
*
* Create a backup operation on @bs. Clusters in @bs are written to @target
* until the job is cancelled or manually completed.
*/
BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
BlockDriverState *target, int64_t speed,
MirrorSyncMode sync_mode,
BdrvDirtyBitmap *sync_bitmap,
BitmapSyncMode bitmap_mode,
bool compress,
const char *filter_node_name,
BackupPerf *perf,
BlockdevOnError on_source_error,
BlockdevOnError on_target_error,
int creation_flags,
BlockCompletionFunc *cb, void *opaque,
JobTxn *txn, Error **errp);
BdrvChild *bdrv_root_attach_child(BlockDriverState *child_bs,
const char *child_name,
const BdrvChildClass *child_class,
BdrvChildRole child_role,
uint64_t perm, uint64_t shared_perm,
void *opaque, Error **errp);
void bdrv_root_unref_child(BdrvChild *child);
void bdrv_get_cumulative_perm(BlockDriverState *bs, uint64_t *perm,
uint64_t *shared_perm);
/**
* Sets a BdrvChild's permissions. Avoid if the parent is a BDS; use
* bdrv_child_refresh_perms() instead and make the parent's
* .bdrv_child_perm() implementation return the correct values.
*/
int bdrv_child_try_set_perm(BdrvChild *c, uint64_t perm, uint64_t shared,
Error **errp);
/**
* Calls bs->drv->bdrv_child_perm() and updates the child's permission
* masks with the result.
* Drivers should invoke this function whenever an event occurs that
* makes their .bdrv_child_perm() implementation return different
* values than before, but which will not result in the block layer
* automatically refreshing the permissions.
*/
int bdrv_child_refresh_perms(BlockDriverState *bs, BdrvChild *c, Error **errp);
bool GRAPH_RDLOCK bdrv_recurse_can_replace(BlockDriverState *bs,
BlockDriverState *to_replace);
/*
* Default implementation for BlockDriver.bdrv_child_perm() that can
* be used by block filters and image formats, as long as they use the
* child_of_bds child class and set an appropriate BdrvChildRole.
*/
void bdrv_default_perms(BlockDriverState *bs, BdrvChild *c,
BdrvChildRole role, BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared);
void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp);
bool blk_dev_has_removable_media(BlockBackend *blk);
void blk_dev_eject_request(BlockBackend *blk, bool force);
bool blk_dev_is_medium_locked(BlockBackend *blk);
void bdrv_restore_dirty_bitmap(BdrvDirtyBitmap *bitmap, HBitmap *backup);
void bdrv_set_monitor_owned(BlockDriverState *bs);
void blockdev_close_all_bdrv_states(void);
BlockDriverState *bds_tree_init(QDict *bs_opts, Error **errp);
/**
* Simple implementation of bdrv_co_create_opts for protocol drivers
* which only support creation via opening a file
* (usually existing raw storage device)
*/
int coroutine_fn bdrv_co_create_opts_simple(BlockDriver *drv,
const char *filename,
QemuOpts *opts,
Error **errp);
BdrvDirtyBitmap *block_dirty_bitmap_lookup(const char *node,
const char *name,
BlockDriverState **pbs,
Error **errp);
BdrvDirtyBitmap *block_dirty_bitmap_merge(const char *node, const char *target,
BlockDirtyBitmapOrStrList *bms,
HBitmap **backup, Error **errp);
BdrvDirtyBitmap *block_dirty_bitmap_remove(const char *node, const char *name,
bool release,
BlockDriverState **bitmap_bs,
Error **errp);
BlockDriverState *bdrv_skip_implicit_filters(BlockDriverState *bs);
/**
* bdrv_add_aio_context_notifier:
*
* If a long-running job intends to be always run in the same AioContext as a
* certain BDS, it may use this function to be notified of changes regarding the
* association of the BDS to an AioContext.
*
* attached_aio_context() is called after the target BDS has been attached to a
* new AioContext; detach_aio_context() is called before the target BDS is being
* detached from its old AioContext.
*/
void bdrv_add_aio_context_notifier(BlockDriverState *bs,
void (*attached_aio_context)(AioContext *new_context, void *opaque),
void (*detach_aio_context)(void *opaque), void *opaque);
/**
* bdrv_remove_aio_context_notifier:
*
* Unsubscribe of change notifications regarding the BDS's AioContext. The
* parameters given here have to be the same as those given to
* bdrv_add_aio_context_notifier().
*/
void bdrv_remove_aio_context_notifier(BlockDriverState *bs,
void (*aio_context_attached)(AioContext *,
void *),
void (*aio_context_detached)(void *),
void *opaque);
/**
* End all quiescent sections started by bdrv_drain_all_begin(). This is
* needed when deleting a BDS before bdrv_drain_all_end() is called.
*
* NOTE: this is an internal helper for bdrv_close() *only*. No one else
* should call it.
*/
void bdrv_drain_all_end_quiesce(BlockDriverState *bs);
#endif /* BLOCK_INT_GLOBAL_STATE_H */