blob: 925654c7fd423d482f51d48a0c305435d51a6e63 [file] [log] [blame]
/*
* libqos driver framework
*
* Copyright (c) 2018 Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1 as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>
*/
#include "qemu/osdep.h"
#include "hw/net/e1000_regs.h"
#include "hw/pci/pci_ids.h"
#include "../libqtest.h"
#include "pci-pc.h"
#include "qemu/sockets.h"
#include "qemu/iov.h"
#include "qemu/module.h"
#include "qemu/bitops.h"
#include "libqos-malloc.h"
#include "qgraph.h"
#include "e1000e.h"
#define E1000E_IVAR_TEST_CFG \
(((E1000E_RX0_MSG_ID | E1000_IVAR_INT_ALLOC_VALID) << E1000_IVAR_RXQ0_SHIFT) | \
((E1000E_TX0_MSG_ID | E1000_IVAR_INT_ALLOC_VALID) << E1000_IVAR_TXQ0_SHIFT) | \
E1000_IVAR_TX_INT_EVERY_WB)
#define E1000E_RING_LEN (0x1000)
void e1000e_tx_ring_push(QE1000E *d, void *descr)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
uint32_t tail = e1000e_macreg_read(d, E1000_TDT);
uint32_t len = e1000e_macreg_read(d, E1000_TDLEN) / E1000_RING_DESC_LEN;
qtest_memwrite(d_pci->pci_dev.bus->qts,
d->tx_ring + tail * E1000_RING_DESC_LEN,
descr, E1000_RING_DESC_LEN);
e1000e_macreg_write(d, E1000_TDT, (tail + 1) % len);
/* Read WB data for the packet transmitted */
qtest_memread(d_pci->pci_dev.bus->qts,
d->tx_ring + tail * E1000_RING_DESC_LEN,
descr, E1000_RING_DESC_LEN);
}
void e1000e_rx_ring_push(QE1000E *d, void *descr)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
uint32_t tail = e1000e_macreg_read(d, E1000_RDT);
uint32_t len = e1000e_macreg_read(d, E1000_RDLEN) / E1000_RING_DESC_LEN;
qtest_memwrite(d_pci->pci_dev.bus->qts,
d->rx_ring + tail * E1000_RING_DESC_LEN,
descr, E1000_RING_DESC_LEN);
e1000e_macreg_write(d, E1000_RDT, (tail + 1) % len);
/* Read WB data for the packet received */
qtest_memread(d_pci->pci_dev.bus->qts,
d->rx_ring + tail * E1000_RING_DESC_LEN,
descr, E1000_RING_DESC_LEN);
}
static void e1000e_foreach_callback(QPCIDevice *dev, int devfn, void *data)
{
QPCIDevice *res = data;
memcpy(res, dev, sizeof(QPCIDevice));
g_free(dev);
}
void e1000e_wait_isr(QE1000E *d, uint16_t msg_id)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
guint64 end_time = g_get_monotonic_time() + 5 * G_TIME_SPAN_SECOND;
do {
if (qpci_msix_pending(&d_pci->pci_dev, msg_id)) {
return;
}
qtest_clock_step(d_pci->pci_dev.bus->qts, 10000);
} while (g_get_monotonic_time() < end_time);
g_error("Timeout expired");
}
static void e1000e_pci_destructor(QOSGraphObject *obj)
{
QE1000E_PCI *epci = (QE1000E_PCI *) obj;
qpci_iounmap(&epci->pci_dev, epci->mac_regs);
qpci_msix_disable(&epci->pci_dev);
}
static void e1000e_pci_start_hw(QOSGraphObject *obj)
{
QE1000E_PCI *d = (QE1000E_PCI *) obj;
uint32_t val;
/* Enable the device */
qpci_device_enable(&d->pci_dev);
/* Reset the device */
val = e1000e_macreg_read(&d->e1000e, E1000_CTRL);
e1000e_macreg_write(&d->e1000e, E1000_CTRL, val | E1000_CTRL_RST | E1000_CTRL_SLU);
/* Enable and configure MSI-X */
qpci_msix_enable(&d->pci_dev);
e1000e_macreg_write(&d->e1000e, E1000_IVAR, E1000E_IVAR_TEST_CFG);
/* Check the device status - link and speed */
val = e1000e_macreg_read(&d->e1000e, E1000_STATUS);
g_assert_cmphex(val & (E1000_STATUS_LU | E1000_STATUS_ASDV_1000),
==, E1000_STATUS_LU | E1000_STATUS_ASDV_1000);
/* Initialize TX/RX logic */
e1000e_macreg_write(&d->e1000e, E1000_RCTL, 0);
e1000e_macreg_write(&d->e1000e, E1000_TCTL, 0);
/* Notify the device that the driver is ready */
val = e1000e_macreg_read(&d->e1000e, E1000_CTRL_EXT);
e1000e_macreg_write(&d->e1000e, E1000_CTRL_EXT,
val | E1000_CTRL_EXT_DRV_LOAD);
e1000e_macreg_write(&d->e1000e, E1000_TDBAL,
(uint32_t) d->e1000e.tx_ring);
e1000e_macreg_write(&d->e1000e, E1000_TDBAH,
(uint32_t) (d->e1000e.tx_ring >> 32));
e1000e_macreg_write(&d->e1000e, E1000_TDLEN, E1000E_RING_LEN);
e1000e_macreg_write(&d->e1000e, E1000_TDT, 0);
e1000e_macreg_write(&d->e1000e, E1000_TDH, 0);
/* Enable transmit */
e1000e_macreg_write(&d->e1000e, E1000_TCTL, E1000_TCTL_EN);
e1000e_macreg_write(&d->e1000e, E1000_RDBAL,
(uint32_t)d->e1000e.rx_ring);
e1000e_macreg_write(&d->e1000e, E1000_RDBAH,
(uint32_t)(d->e1000e.rx_ring >> 32));
e1000e_macreg_write(&d->e1000e, E1000_RDLEN, E1000E_RING_LEN);
e1000e_macreg_write(&d->e1000e, E1000_RDT, 0);
e1000e_macreg_write(&d->e1000e, E1000_RDH, 0);
/* Enable receive */
e1000e_macreg_write(&d->e1000e, E1000_RFCTL, E1000_RFCTL_EXTEN);
e1000e_macreg_write(&d->e1000e, E1000_RCTL, E1000_RCTL_EN |
E1000_RCTL_UPE |
E1000_RCTL_MPE);
/* Enable all interrupts */
e1000e_macreg_write(&d->e1000e, E1000_IMS, 0xFFFFFFFF);
}
static void *e1000e_pci_get_driver(void *obj, const char *interface)
{
QE1000E_PCI *epci = obj;
if (!g_strcmp0(interface, "e1000e-if")) {
return &epci->e1000e;
}
/* implicit contains */
if (!g_strcmp0(interface, "pci-device")) {
return &epci->pci_dev;
}
fprintf(stderr, "%s not present in e1000e\n", interface);
g_assert_not_reached();
}
static void *e1000e_pci_create(void *pci_bus, QGuestAllocator *alloc,
void *addr)
{
QE1000E_PCI *d = g_new0(QE1000E_PCI, 1);
QPCIBus *bus = pci_bus;
QPCIAddress *address = addr;
qpci_device_foreach(bus, address->vendor_id, address->device_id,
e1000e_foreach_callback, &d->pci_dev);
/* Map BAR0 (mac registers) */
d->mac_regs = qpci_iomap(&d->pci_dev, 0, NULL);
/* Allocate and setup TX ring */
d->e1000e.tx_ring = guest_alloc(alloc, E1000E_RING_LEN);
g_assert(d->e1000e.tx_ring != 0);
/* Allocate and setup RX ring */
d->e1000e.rx_ring = guest_alloc(alloc, E1000E_RING_LEN);
g_assert(d->e1000e.rx_ring != 0);
d->obj.get_driver = e1000e_pci_get_driver;
d->obj.start_hw = e1000e_pci_start_hw;
d->obj.destructor = e1000e_pci_destructor;
return &d->obj;
}
static void e1000e_register_nodes(void)
{
QPCIAddress addr = {
.vendor_id = PCI_VENDOR_ID_INTEL,
.device_id = E1000_DEV_ID_82574L,
};
/*
* FIXME: every test using this node needs to setup a -netdev socket,id=hs0
* otherwise QEMU is not going to start
*/
QOSGraphEdgeOptions opts = {
.extra_device_opts = "netdev=hs0",
};
add_qpci_address(&opts, &addr);
qos_node_create_driver("e1000e", e1000e_pci_create);
qos_node_consumes("e1000e", "pci-bus", &opts);
}
libqos_init(e1000e_register_nodes);