blob: 25cea7aa674b6205b28c387bdeb5408737e73dde [file] [log] [blame]
/*
* QEMU RISC-V VirtIO Board
*
* Copyright (c) 2017 SiFive, Inc.
*
* RISC-V machine with 16550a UART and VirtIO MMIO
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "hw/boards.h"
#include "hw/loader.h"
#include "hw/sysbus.h"
#include "hw/qdev-properties.h"
#include "hw/char/serial.h"
#include "target/riscv/cpu.h"
#include "hw/riscv/riscv_hart.h"
#include "hw/riscv/virt.h"
#include "hw/riscv/boot.h"
#include "hw/riscv/numa.h"
#include "hw/intc/sifive_clint.h"
#include "hw/intc/sifive_plic.h"
#include "hw/misc/sifive_test.h"
#include "chardev/char.h"
#include "sysemu/arch_init.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
#include "hw/pci/pci.h"
#include "hw/pci-host/gpex.h"
#if defined(TARGET_RISCV32)
# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
#else
# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin"
#endif
static const struct MemmapEntry {
hwaddr base;
hwaddr size;
} virt_memmap[] = {
[VIRT_DEBUG] = { 0x0, 0x100 },
[VIRT_MROM] = { 0x1000, 0xf000 },
[VIRT_TEST] = { 0x100000, 0x1000 },
[VIRT_RTC] = { 0x101000, 0x1000 },
[VIRT_CLINT] = { 0x2000000, 0x10000 },
[VIRT_PCIE_PIO] = { 0x3000000, 0x10000 },
[VIRT_PLIC] = { 0xc000000, VIRT_PLIC_SIZE(VIRT_CPUS_MAX * 2) },
[VIRT_UART0] = { 0x10000000, 0x100 },
[VIRT_VIRTIO] = { 0x10001000, 0x1000 },
[VIRT_FLASH] = { 0x20000000, 0x4000000 },
[VIRT_PCIE_ECAM] = { 0x30000000, 0x10000000 },
[VIRT_PCIE_MMIO] = { 0x40000000, 0x40000000 },
[VIRT_DRAM] = { 0x80000000, 0x0 },
};
#define VIRT_FLASH_SECTOR_SIZE (256 * KiB)
static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s,
const char *name,
const char *alias_prop_name)
{
/*
* Create a single flash device. We use the same parameters as
* the flash devices on the ARM virt board.
*/
DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01);
qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE);
qdev_prop_set_uint8(dev, "width", 4);
qdev_prop_set_uint8(dev, "device-width", 2);
qdev_prop_set_bit(dev, "big-endian", false);
qdev_prop_set_uint16(dev, "id0", 0x89);
qdev_prop_set_uint16(dev, "id1", 0x18);
qdev_prop_set_uint16(dev, "id2", 0x00);
qdev_prop_set_uint16(dev, "id3", 0x00);
qdev_prop_set_string(dev, "name", name);
object_property_add_child(OBJECT(s), name, OBJECT(dev));
object_property_add_alias(OBJECT(s), alias_prop_name,
OBJECT(dev), "drive");
return PFLASH_CFI01(dev);
}
static void virt_flash_create(RISCVVirtState *s)
{
s->flash[0] = virt_flash_create1(s, "virt.flash0", "pflash0");
s->flash[1] = virt_flash_create1(s, "virt.flash1", "pflash1");
}
static void virt_flash_map1(PFlashCFI01 *flash,
hwaddr base, hwaddr size,
MemoryRegion *sysmem)
{
DeviceState *dev = DEVICE(flash);
assert(QEMU_IS_ALIGNED(size, VIRT_FLASH_SECTOR_SIZE));
assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX);
qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
memory_region_add_subregion(sysmem, base,
sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
0));
}
static void virt_flash_map(RISCVVirtState *s,
MemoryRegion *sysmem)
{
hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
virt_flash_map1(s->flash[0], flashbase, flashsize,
sysmem);
virt_flash_map1(s->flash[1], flashbase + flashsize, flashsize,
sysmem);
}
static void create_pcie_irq_map(void *fdt, char *nodename,
uint32_t plic_phandle)
{
int pin, dev;
uint32_t
full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS * FDT_INT_MAP_WIDTH] = {};
uint32_t *irq_map = full_irq_map;
/* This code creates a standard swizzle of interrupts such that
* each device's first interrupt is based on it's PCI_SLOT number.
* (See pci_swizzle_map_irq_fn())
*
* We only need one entry per interrupt in the table (not one per
* possible slot) seeing the interrupt-map-mask will allow the table
* to wrap to any number of devices.
*/
for (dev = 0; dev < GPEX_NUM_IRQS; dev++) {
int devfn = dev * 0x8;
for (pin = 0; pin < GPEX_NUM_IRQS; pin++) {
int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS);
int i = 0;
irq_map[i] = cpu_to_be32(devfn << 8);
i += FDT_PCI_ADDR_CELLS;
irq_map[i] = cpu_to_be32(pin + 1);
i += FDT_PCI_INT_CELLS;
irq_map[i++] = cpu_to_be32(plic_phandle);
i += FDT_PLIC_ADDR_CELLS;
irq_map[i] = cpu_to_be32(irq_nr);
irq_map += FDT_INT_MAP_WIDTH;
}
}
qemu_fdt_setprop(fdt, nodename, "interrupt-map",
full_irq_map, sizeof(full_irq_map));
qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask",
0x1800, 0, 0, 0x7);
}
static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
uint64_t mem_size, const char *cmdline)
{
void *fdt;
int i, cpu, socket;
const char *dtb_filename;
MachineState *mc = MACHINE(s);
uint64_t addr, size;
uint32_t *clint_cells, *plic_cells;
unsigned long clint_addr, plic_addr;
uint32_t plic_phandle[MAX_NODES];
uint32_t cpu_phandle, intc_phandle, test_phandle;
uint32_t phandle = 1, plic_mmio_phandle = 1;
uint32_t plic_pcie_phandle = 1, plic_virtio_phandle = 1;
char *mem_name, *cpu_name, *core_name, *intc_name;
char *name, *clint_name, *plic_name, *clust_name;
hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb");
if (dtb_filename) {
fdt = s->fdt = load_device_tree(dtb_filename, &s->fdt_size);
if (!fdt) {
error_report("load_device_tree() failed");
exit(1);
}
goto update_bootargs;
} else {
fdt = s->fdt = create_device_tree(&s->fdt_size);
if (!fdt) {
error_report("create_device_tree() failed");
exit(1);
}
}
qemu_fdt_setprop_string(fdt, "/", "model", "riscv-virtio,qemu");
qemu_fdt_setprop_string(fdt, "/", "compatible", "riscv-virtio");
qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
qemu_fdt_add_subnode(fdt, "/soc");
qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
qemu_fdt_add_subnode(fdt, "/cpus");
qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
SIFIVE_CLINT_TIMEBASE_FREQ);
qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
qemu_fdt_add_subnode(fdt, "/cpus/cpu-map");
for (socket = (riscv_socket_count(mc) - 1); socket >= 0; socket--) {
clust_name = g_strdup_printf("/cpus/cpu-map/cluster%d", socket);
qemu_fdt_add_subnode(fdt, clust_name);
plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
clint_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4);
for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) {
cpu_phandle = phandle++;
cpu_name = g_strdup_printf("/cpus/cpu@%d",
s->soc[socket].hartid_base + cpu);
qemu_fdt_add_subnode(fdt, cpu_name);
#if defined(TARGET_RISCV32)
qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
#else
qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
#endif
name = riscv_isa_string(&s->soc[socket].harts[cpu]);
qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
g_free(name);
qemu_fdt_setprop_string(fdt, cpu_name, "compatible", "riscv");
qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay");
qemu_fdt_setprop_cell(fdt, cpu_name, "reg",
s->soc[socket].hartid_base + cpu);
qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu");
riscv_socket_fdt_write_id(mc, fdt, cpu_name, socket);
qemu_fdt_setprop_cell(fdt, cpu_name, "phandle", cpu_phandle);
intc_name = g_strdup_printf("%s/interrupt-controller", cpu_name);
qemu_fdt_add_subnode(fdt, intc_name);
intc_phandle = phandle++;
qemu_fdt_setprop_cell(fdt, intc_name, "phandle", intc_phandle);
qemu_fdt_setprop_string(fdt, intc_name, "compatible",
"riscv,cpu-intc");
qemu_fdt_setprop(fdt, intc_name, "interrupt-controller", NULL, 0);
qemu_fdt_setprop_cell(fdt, intc_name, "#interrupt-cells", 1);
clint_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
clint_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
clint_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
clint_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
plic_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
plic_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT);
plic_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
plic_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT);
core_name = g_strdup_printf("%s/core%d", clust_name, cpu);
qemu_fdt_add_subnode(fdt, core_name);
qemu_fdt_setprop_cell(fdt, core_name, "cpu", cpu_phandle);
g_free(core_name);
g_free(intc_name);
g_free(cpu_name);
}
addr = memmap[VIRT_DRAM].base + riscv_socket_mem_offset(mc, socket);
size = riscv_socket_mem_size(mc, socket);
mem_name = g_strdup_printf("/memory@%lx", (long)addr);
qemu_fdt_add_subnode(fdt, mem_name);
qemu_fdt_setprop_cells(fdt, mem_name, "reg",
addr >> 32, addr, size >> 32, size);
qemu_fdt_setprop_string(fdt, mem_name, "device_type", "memory");
riscv_socket_fdt_write_id(mc, fdt, mem_name, socket);
g_free(mem_name);
clint_addr = memmap[VIRT_CLINT].base +
(memmap[VIRT_CLINT].size * socket);
clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr);
qemu_fdt_add_subnode(fdt, clint_name);
qemu_fdt_setprop_string(fdt, clint_name, "compatible", "riscv,clint0");
qemu_fdt_setprop_cells(fdt, clint_name, "reg",
0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size);
qemu_fdt_setprop(fdt, clint_name, "interrupts-extended",
clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
riscv_socket_fdt_write_id(mc, fdt, clint_name, socket);
g_free(clint_name);
plic_phandle[socket] = phandle++;
plic_addr = memmap[VIRT_PLIC].base + (memmap[VIRT_PLIC].size * socket);
plic_name = g_strdup_printf("/soc/plic@%lx", plic_addr);
qemu_fdt_add_subnode(fdt, plic_name);
qemu_fdt_setprop_cell(fdt, plic_name,
"#address-cells", FDT_PLIC_ADDR_CELLS);
qemu_fdt_setprop_cell(fdt, plic_name,
"#interrupt-cells", FDT_PLIC_INT_CELLS);
qemu_fdt_setprop_string(fdt, plic_name, "compatible", "riscv,plic0");
qemu_fdt_setprop(fdt, plic_name, "interrupt-controller", NULL, 0);
qemu_fdt_setprop(fdt, plic_name, "interrupts-extended",
plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4);
qemu_fdt_setprop_cells(fdt, plic_name, "reg",
0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size);
qemu_fdt_setprop_cell(fdt, plic_name, "riscv,ndev", VIRTIO_NDEV);
riscv_socket_fdt_write_id(mc, fdt, plic_name, socket);
qemu_fdt_setprop_cell(fdt, plic_name, "phandle", plic_phandle[socket]);
g_free(plic_name);
g_free(clint_cells);
g_free(plic_cells);
g_free(clust_name);
}
for (socket = 0; socket < riscv_socket_count(mc); socket++) {
if (socket == 0) {
plic_mmio_phandle = plic_phandle[socket];
plic_virtio_phandle = plic_phandle[socket];
plic_pcie_phandle = plic_phandle[socket];
}
if (socket == 1) {
plic_virtio_phandle = plic_phandle[socket];
plic_pcie_phandle = plic_phandle[socket];
}
if (socket == 2) {
plic_pcie_phandle = plic_phandle[socket];
}
}
riscv_socket_fdt_write_distance_matrix(mc, fdt);
for (i = 0; i < VIRTIO_COUNT; i++) {
name = g_strdup_printf("/soc/virtio_mmio@%lx",
(long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size));
qemu_fdt_add_subnode(fdt, name);
qemu_fdt_setprop_string(fdt, name, "compatible", "virtio,mmio");
qemu_fdt_setprop_cells(fdt, name, "reg",
0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size,
0x0, memmap[VIRT_VIRTIO].size);
qemu_fdt_setprop_cell(fdt, name, "interrupt-parent",
plic_virtio_phandle);
qemu_fdt_setprop_cell(fdt, name, "interrupts", VIRTIO_IRQ + i);
g_free(name);
}
name = g_strdup_printf("/soc/pci@%lx",
(long) memmap[VIRT_PCIE_ECAM].base);
qemu_fdt_add_subnode(fdt, name);
qemu_fdt_setprop_cell(fdt, name, "#address-cells", FDT_PCI_ADDR_CELLS);
qemu_fdt_setprop_cell(fdt, name, "#interrupt-cells", FDT_PCI_INT_CELLS);
qemu_fdt_setprop_cell(fdt, name, "#size-cells", 0x2);
qemu_fdt_setprop_string(fdt, name, "compatible", "pci-host-ecam-generic");
qemu_fdt_setprop_string(fdt, name, "device_type", "pci");
qemu_fdt_setprop_cell(fdt, name, "linux,pci-domain", 0);
qemu_fdt_setprop_cells(fdt, name, "bus-range", 0,
memmap[VIRT_PCIE_ECAM].size / PCIE_MMCFG_SIZE_MIN - 1);
qemu_fdt_setprop(fdt, name, "dma-coherent", NULL, 0);
qemu_fdt_setprop_cells(fdt, name, "reg", 0,
memmap[VIRT_PCIE_ECAM].base, 0, memmap[VIRT_PCIE_ECAM].size);
qemu_fdt_setprop_sized_cells(fdt, name, "ranges",
1, FDT_PCI_RANGE_IOPORT, 2, 0,
2, memmap[VIRT_PCIE_PIO].base, 2, memmap[VIRT_PCIE_PIO].size,
1, FDT_PCI_RANGE_MMIO,
2, memmap[VIRT_PCIE_MMIO].base,
2, memmap[VIRT_PCIE_MMIO].base, 2, memmap[VIRT_PCIE_MMIO].size);
create_pcie_irq_map(fdt, name, plic_pcie_phandle);
g_free(name);
test_phandle = phandle++;
name = g_strdup_printf("/soc/test@%lx",
(long)memmap[VIRT_TEST].base);
qemu_fdt_add_subnode(fdt, name);
{
const char compat[] = "sifive,test1\0sifive,test0\0syscon";
qemu_fdt_setprop(fdt, name, "compatible", compat, sizeof(compat));
}
qemu_fdt_setprop_cells(fdt, name, "reg",
0x0, memmap[VIRT_TEST].base,
0x0, memmap[VIRT_TEST].size);
qemu_fdt_setprop_cell(fdt, name, "phandle", test_phandle);
test_phandle = qemu_fdt_get_phandle(fdt, name);
g_free(name);
name = g_strdup_printf("/soc/reboot");
qemu_fdt_add_subnode(fdt, name);
qemu_fdt_setprop_string(fdt, name, "compatible", "syscon-reboot");
qemu_fdt_setprop_cell(fdt, name, "regmap", test_phandle);
qemu_fdt_setprop_cell(fdt, name, "offset", 0x0);
qemu_fdt_setprop_cell(fdt, name, "value", FINISHER_RESET);
g_free(name);
name = g_strdup_printf("/soc/poweroff");
qemu_fdt_add_subnode(fdt, name);
qemu_fdt_setprop_string(fdt, name, "compatible", "syscon-poweroff");
qemu_fdt_setprop_cell(fdt, name, "regmap", test_phandle);
qemu_fdt_setprop_cell(fdt, name, "offset", 0x0);
qemu_fdt_setprop_cell(fdt, name, "value", FINISHER_PASS);
g_free(name);
name = g_strdup_printf("/soc/uart@%lx", (long)memmap[VIRT_UART0].base);
qemu_fdt_add_subnode(fdt, name);
qemu_fdt_setprop_string(fdt, name, "compatible", "ns16550a");
qemu_fdt_setprop_cells(fdt, name, "reg",
0x0, memmap[VIRT_UART0].base,
0x0, memmap[VIRT_UART0].size);
qemu_fdt_setprop_cell(fdt, name, "clock-frequency", 3686400);
qemu_fdt_setprop_cell(fdt, name, "interrupt-parent", plic_mmio_phandle);
qemu_fdt_setprop_cell(fdt, name, "interrupts", UART0_IRQ);
qemu_fdt_add_subnode(fdt, "/chosen");
qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", name);
g_free(name);
name = g_strdup_printf("/soc/rtc@%lx", (long)memmap[VIRT_RTC].base);
qemu_fdt_add_subnode(fdt, name);
qemu_fdt_setprop_string(fdt, name, "compatible", "google,goldfish-rtc");
qemu_fdt_setprop_cells(fdt, name, "reg",
0x0, memmap[VIRT_RTC].base,
0x0, memmap[VIRT_RTC].size);
qemu_fdt_setprop_cell(fdt, name, "interrupt-parent", plic_mmio_phandle);
qemu_fdt_setprop_cell(fdt, name, "interrupts", RTC_IRQ);
g_free(name);
name = g_strdup_printf("/soc/flash@%" PRIx64, flashbase);
qemu_fdt_add_subnode(s->fdt, name);
qemu_fdt_setprop_string(s->fdt, name, "compatible", "cfi-flash");
qemu_fdt_setprop_sized_cells(s->fdt, name, "reg",
2, flashbase, 2, flashsize,
2, flashbase + flashsize, 2, flashsize);
qemu_fdt_setprop_cell(s->fdt, name, "bank-width", 4);
g_free(name);
update_bootargs:
if (cmdline) {
qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline);
}
}
static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem,
hwaddr ecam_base, hwaddr ecam_size,
hwaddr mmio_base, hwaddr mmio_size,
hwaddr pio_base,
DeviceState *plic, bool link_up)
{
DeviceState *dev;
MemoryRegion *ecam_alias, *ecam_reg;
MemoryRegion *mmio_alias, *mmio_reg;
qemu_irq irq;
int i;
dev = qdev_new(TYPE_GPEX_HOST);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
ecam_alias = g_new0(MemoryRegion, 1);
ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam",
ecam_reg, 0, ecam_size);
memory_region_add_subregion(get_system_memory(), ecam_base, ecam_alias);
mmio_alias = g_new0(MemoryRegion, 1);
mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
mmio_reg, mmio_base, mmio_size);
memory_region_add_subregion(get_system_memory(), mmio_base, mmio_alias);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, pio_base);
for (i = 0; i < GPEX_NUM_IRQS; i++) {
irq = qdev_get_gpio_in(plic, PCIE_IRQ + i);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ + i);
}
return dev;
}
static void virt_machine_init(MachineState *machine)
{
const struct MemmapEntry *memmap = virt_memmap;
RISCVVirtState *s = RISCV_VIRT_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *main_mem = g_new(MemoryRegion, 1);
MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
char *plic_hart_config, *soc_name;
size_t plic_hart_config_len;
target_ulong start_addr = memmap[VIRT_DRAM].base;
target_ulong firmware_end_addr, kernel_start_addr;
uint32_t fdt_load_addr;
uint64_t kernel_entry;
DeviceState *mmio_plic, *virtio_plic, *pcie_plic;
int i, j, base_hartid, hart_count;
/* Check socket count limit */
if (VIRT_SOCKETS_MAX < riscv_socket_count(machine)) {
error_report("number of sockets/nodes should be less than %d",
VIRT_SOCKETS_MAX);
exit(1);
}
/* Initialize sockets */
mmio_plic = virtio_plic = pcie_plic = NULL;
for (i = 0; i < riscv_socket_count(machine); i++) {
if (!riscv_socket_check_hartids(machine, i)) {
error_report("discontinuous hartids in socket%d", i);
exit(1);
}
base_hartid = riscv_socket_first_hartid(machine, i);
if (base_hartid < 0) {
error_report("can't find hartid base for socket%d", i);
exit(1);
}
hart_count = riscv_socket_hart_count(machine, i);
if (hart_count < 0) {
error_report("can't find hart count for socket%d", i);
exit(1);
}
soc_name = g_strdup_printf("soc%d", i);
object_initialize_child(OBJECT(machine), soc_name, &s->soc[i],
TYPE_RISCV_HART_ARRAY);
g_free(soc_name);
object_property_set_str(OBJECT(&s->soc[i]), "cpu-type",
machine->cpu_type, &error_abort);
object_property_set_int(OBJECT(&s->soc[i]), "hartid-base",
base_hartid, &error_abort);
object_property_set_int(OBJECT(&s->soc[i]), "num-harts",
hart_count, &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort);
/* Per-socket CLINT */
sifive_clint_create(
memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size,
memmap[VIRT_CLINT].size, base_hartid, hart_count,
SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
SIFIVE_CLINT_TIMEBASE_FREQ, true);
/* Per-socket PLIC hart topology configuration string */
plic_hart_config_len =
(strlen(VIRT_PLIC_HART_CONFIG) + 1) * hart_count;
plic_hart_config = g_malloc0(plic_hart_config_len);
for (j = 0; j < hart_count; j++) {
if (j != 0) {
strncat(plic_hart_config, ",", plic_hart_config_len);
}
strncat(plic_hart_config, VIRT_PLIC_HART_CONFIG,
plic_hart_config_len);
plic_hart_config_len -= (strlen(VIRT_PLIC_HART_CONFIG) + 1);
}
/* Per-socket PLIC */
s->plic[i] = sifive_plic_create(
memmap[VIRT_PLIC].base + i * memmap[VIRT_PLIC].size,
plic_hart_config, base_hartid,
VIRT_PLIC_NUM_SOURCES,
VIRT_PLIC_NUM_PRIORITIES,
VIRT_PLIC_PRIORITY_BASE,
VIRT_PLIC_PENDING_BASE,
VIRT_PLIC_ENABLE_BASE,
VIRT_PLIC_ENABLE_STRIDE,
VIRT_PLIC_CONTEXT_BASE,
VIRT_PLIC_CONTEXT_STRIDE,
memmap[VIRT_PLIC].size);
g_free(plic_hart_config);
/* Try to use different PLIC instance based device type */
if (i == 0) {
mmio_plic = s->plic[i];
virtio_plic = s->plic[i];
pcie_plic = s->plic[i];
}
if (i == 1) {
virtio_plic = s->plic[i];
pcie_plic = s->plic[i];
}
if (i == 2) {
pcie_plic = s->plic[i];
}
}
/* register system main memory (actual RAM) */
memory_region_init_ram(main_mem, NULL, "riscv_virt_board.ram",
machine->ram_size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base,
main_mem);
/* create device tree */
create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
/* boot rom */
memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
memmap[VIRT_MROM].size, &error_fatal);
memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
mask_rom);
firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
start_addr, NULL);
if (machine->kernel_filename) {
kernel_start_addr = riscv_calc_kernel_start_addr(machine,
firmware_end_addr);
kernel_entry = riscv_load_kernel(machine->kernel_filename,
kernel_start_addr, NULL);
if (machine->initrd_filename) {
hwaddr start;
hwaddr end = riscv_load_initrd(machine->initrd_filename,
machine->ram_size, kernel_entry,
&start);
qemu_fdt_setprop_cell(s->fdt, "/chosen",
"linux,initrd-start", start);
qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end",
end);
}
} else {
/*
* If dynamic firmware is used, it doesn't know where is the next mode
* if kernel argument is not set.
*/
kernel_entry = 0;
}
if (drive_get(IF_PFLASH, 0, 0)) {
/*
* Pflash was supplied, let's overwrite the address we jump to after
* reset to the base of the flash.
*/
start_addr = virt_memmap[VIRT_FLASH].base;
}
/* Compute the fdt load address in dram */
fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
machine->ram_size, s->fdt);
/* load the reset vector */
riscv_setup_rom_reset_vec(start_addr, virt_memmap[VIRT_MROM].base,
virt_memmap[VIRT_MROM].size, kernel_entry,
fdt_load_addr, s->fdt);
/* SiFive Test MMIO device */
sifive_test_create(memmap[VIRT_TEST].base);
/* VirtIO MMIO devices */
for (i = 0; i < VIRTIO_COUNT; i++) {
sysbus_create_simple("virtio-mmio",
memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size,
qdev_get_gpio_in(DEVICE(virtio_plic), VIRTIO_IRQ + i));
}
gpex_pcie_init(system_memory,
memmap[VIRT_PCIE_ECAM].base,
memmap[VIRT_PCIE_ECAM].size,
memmap[VIRT_PCIE_MMIO].base,
memmap[VIRT_PCIE_MMIO].size,
memmap[VIRT_PCIE_PIO].base,
DEVICE(pcie_plic), true);
serial_mm_init(system_memory, memmap[VIRT_UART0].base,
0, qdev_get_gpio_in(DEVICE(mmio_plic), UART0_IRQ), 399193,
serial_hd(0), DEVICE_LITTLE_ENDIAN);
sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base,
qdev_get_gpio_in(DEVICE(mmio_plic), RTC_IRQ));
virt_flash_create(s);
for (i = 0; i < ARRAY_SIZE(s->flash); i++) {
/* Map legacy -drive if=pflash to machine properties */
pflash_cfi01_legacy_drive(s->flash[i],
drive_get(IF_PFLASH, 0, i));
}
virt_flash_map(s, system_memory);
}
static void virt_machine_instance_init(Object *obj)
{
}
static void virt_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "RISC-V VirtIO board";
mc->init = virt_machine_init;
mc->max_cpus = VIRT_CPUS_MAX;
mc->default_cpu_type = VIRT_CPU;
mc->pci_allow_0_address = true;
mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids;
mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id;
mc->numa_mem_supported = true;
}
static const TypeInfo virt_machine_typeinfo = {
.name = MACHINE_TYPE_NAME("virt"),
.parent = TYPE_MACHINE,
.class_init = virt_machine_class_init,
.instance_init = virt_machine_instance_init,
.instance_size = sizeof(RISCVVirtState),
};
static void virt_machine_init_register_types(void)
{
type_register_static(&virt_machine_typeinfo);
}
type_init(virt_machine_init_register_types)