| HXCOMM Use DEFHEADING() to define headings in both help text and texi |
| HXCOMM Text between STEXI and ETEXI are copied to texi version and |
| HXCOMM discarded from C version |
| HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and |
| HXCOMM does not show up in the other formats. |
| HXCOMM DEF(command, args, callback, arg_string, help) is used to construct |
| HXCOMM monitor commands |
| HXCOMM HXCOMM can be used for comments, discarded from both texi and C |
| |
| SQMP |
| QMP Supported Commands |
| ---------------------- |
| |
| This document describes all commands currently supported by QMP. |
| |
| Most of the time their usage is exactly the same as in the user Monitor, this |
| means that any other document which also describe commands (the manpage, |
| QEMU's manual, etc) can and should be consulted. |
| |
| QMP has two types of commands: regular and query commands. Regular commands |
| usually change the Virtual Machine's state someway, while query commands just |
| return information. The sections below are divided accordingly. |
| |
| It's important to observe that all communication examples are formatted in |
| a reader-friendly way, so that they're easier to understand. However, in real |
| protocol usage, they're emitted as a single line. |
| |
| Also, the following notation is used to denote data flow: |
| |
| -> data issued by the Client |
| <- Server data response |
| |
| Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed |
| information on the Server command and response formats. |
| |
| NOTE: This document is temporary and will be replaced soon. |
| |
| 1. Regular Commands |
| =================== |
| |
| Server's responses in the examples below are always a success response, please |
| refer to the QMP specification for more details on error responses. |
| |
| EQMP |
| |
| STEXI |
| @table @option |
| ETEXI |
| |
| { |
| .name = "help|?", |
| .args_type = "name:s?", |
| .params = "[cmd]", |
| .help = "show the help", |
| .mhandler.cmd = do_help_cmd, |
| }, |
| |
| STEXI |
| @item help or ? [@var{cmd}] |
| @findex help |
| Show the help for all commands or just for command @var{cmd}. |
| ETEXI |
| |
| { |
| .name = "commit", |
| .args_type = "device:B", |
| .params = "device|all", |
| .help = "commit changes to the disk images (if -snapshot is used) or backing files", |
| .mhandler.cmd = do_commit, |
| }, |
| |
| STEXI |
| @item commit |
| @findex commit |
| Commit changes to the disk images (if -snapshot is used) or backing files. |
| ETEXI |
| |
| { |
| .name = "q|quit", |
| .args_type = "", |
| .params = "", |
| .help = "quit the emulator", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_quit, |
| }, |
| |
| STEXI |
| @item q or quit |
| @findex quit |
| Quit the emulator. |
| ETEXI |
| SQMP |
| quit |
| ---- |
| |
| Quit the emulator. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "quit" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "eject", |
| .args_type = "force:-f,device:B", |
| .params = "[-f] device", |
| .help = "eject a removable medium (use -f to force it)", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_eject, |
| }, |
| |
| STEXI |
| @item eject [-f] @var{device} |
| @findex eject |
| Eject a removable medium (use -f to force it). |
| ETEXI |
| SQMP |
| eject |
| ----- |
| |
| Eject a removable medium. |
| |
| Arguments: |
| |
| - force: force ejection (json-bool, optional) |
| - device: device name (json-string) |
| |
| Example: |
| |
| -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } } |
| <- { "return": {} } |
| |
| Note: The "force" argument defaults to false. |
| |
| EQMP |
| |
| { |
| .name = "change", |
| .args_type = "device:B,target:F,arg:s?", |
| .params = "device filename [format]", |
| .help = "change a removable medium, optional format", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_change, |
| }, |
| |
| STEXI |
| @item change @var{device} @var{setting} |
| @findex change |
| |
| Change the configuration of a device. |
| |
| @table @option |
| @item change @var{diskdevice} @var{filename} [@var{format}] |
| Change the medium for a removable disk device to point to @var{filename}. eg |
| |
| @example |
| (qemu) change ide1-cd0 /path/to/some.iso |
| @end example |
| |
| @var{format} is optional. |
| |
| @item change vnc @var{display},@var{options} |
| Change the configuration of the VNC server. The valid syntax for @var{display} |
| and @var{options} are described at @ref{sec_invocation}. eg |
| |
| @example |
| (qemu) change vnc localhost:1 |
| @end example |
| |
| @item change vnc password [@var{password}] |
| |
| Change the password associated with the VNC server. If the new password is not |
| supplied, the monitor will prompt for it to be entered. VNC passwords are only |
| significant up to 8 letters. eg |
| |
| @example |
| (qemu) change vnc password |
| Password: ******** |
| @end example |
| |
| @end table |
| ETEXI |
| SQMP |
| change |
| ------ |
| |
| Change a removable medium or VNC configuration. |
| |
| Arguments: |
| |
| - "device": device name (json-string) |
| - "target": filename or item (json-string) |
| - "arg": additional argument (json-string, optional) |
| |
| Examples: |
| |
| 1. Change a removable medium |
| |
| -> { "execute": "change", |
| "arguments": { "device": "ide1-cd0", |
| "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } } |
| <- { "return": {} } |
| |
| 2. Change VNC password |
| |
| -> { "execute": "change", |
| "arguments": { "device": "vnc", "target": "password", |
| "arg": "foobar1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "screendump", |
| .args_type = "filename:F", |
| .params = "filename", |
| .help = "save screen into PPM image 'filename'", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_screen_dump, |
| }, |
| |
| STEXI |
| @item screendump @var{filename} |
| @findex screendump |
| Save screen into PPM image @var{filename}. |
| ETEXI |
| SQMP |
| screendump |
| ---------- |
| |
| Save screen into PPM image. |
| |
| Arguments: |
| |
| - "filename": file path (json-string) |
| |
| Example: |
| |
| -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "logfile", |
| .args_type = "filename:F", |
| .params = "filename", |
| .help = "output logs to 'filename'", |
| .mhandler.cmd = do_logfile, |
| }, |
| |
| STEXI |
| @item logfile @var{filename} |
| @findex logfile |
| Output logs to @var{filename}. |
| ETEXI |
| |
| { |
| .name = "log", |
| .args_type = "items:s", |
| .params = "item1[,...]", |
| .help = "activate logging of the specified items to '/tmp/qemu.log'", |
| .mhandler.cmd = do_log, |
| }, |
| |
| STEXI |
| @item log @var{item1}[,...] |
| @findex log |
| Activate logging of the specified items to @file{/tmp/qemu.log}. |
| ETEXI |
| |
| { |
| .name = "savevm", |
| .args_type = "name:s?", |
| .params = "[tag|id]", |
| .help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created", |
| .mhandler.cmd = do_savevm, |
| }, |
| |
| STEXI |
| @item savevm [@var{tag}|@var{id}] |
| @findex savevm |
| Create a snapshot of the whole virtual machine. If @var{tag} is |
| provided, it is used as human readable identifier. If there is already |
| a snapshot with the same tag or ID, it is replaced. More info at |
| @ref{vm_snapshots}. |
| ETEXI |
| |
| { |
| .name = "loadvm", |
| .args_type = "name:s", |
| .params = "tag|id", |
| .help = "restore a VM snapshot from its tag or id", |
| .mhandler.cmd = do_loadvm, |
| }, |
| |
| STEXI |
| @item loadvm @var{tag}|@var{id} |
| @findex loadvm |
| Set the whole virtual machine to the snapshot identified by the tag |
| @var{tag} or the unique snapshot ID @var{id}. |
| ETEXI |
| |
| { |
| .name = "delvm", |
| .args_type = "name:s", |
| .params = "tag|id", |
| .help = "delete a VM snapshot from its tag or id", |
| .mhandler.cmd = do_delvm, |
| }, |
| |
| STEXI |
| @item delvm @var{tag}|@var{id} |
| @findex delvm |
| Delete the snapshot identified by @var{tag} or @var{id}. |
| ETEXI |
| |
| { |
| .name = "singlestep", |
| .args_type = "option:s?", |
| .params = "[on|off]", |
| .help = "run emulation in singlestep mode or switch to normal mode", |
| .mhandler.cmd = do_singlestep, |
| }, |
| |
| STEXI |
| @item singlestep [off] |
| @findex singlestep |
| Run the emulation in single step mode. |
| If called with option off, the emulation returns to normal mode. |
| ETEXI |
| |
| { |
| .name = "stop", |
| .args_type = "", |
| .params = "", |
| .help = "stop emulation", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_stop, |
| }, |
| |
| STEXI |
| @item stop |
| @findex stop |
| Stop emulation. |
| ETEXI |
| SQMP |
| stop |
| ---- |
| |
| Stop the emulator. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "stop" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "c|cont", |
| .args_type = "", |
| .params = "", |
| .help = "resume emulation", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_cont, |
| }, |
| |
| STEXI |
| @item c or cont |
| @findex cont |
| Resume emulation. |
| ETEXI |
| SQMP |
| cont |
| ---- |
| |
| Resume emulation. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "cont" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "gdbserver", |
| .args_type = "device:s?", |
| .params = "[device]", |
| .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'", |
| .mhandler.cmd = do_gdbserver, |
| }, |
| |
| STEXI |
| @item gdbserver [@var{port}] |
| @findex gdbserver |
| Start gdbserver session (default @var{port}=1234) |
| ETEXI |
| |
| { |
| .name = "x", |
| .args_type = "fmt:/,addr:l", |
| .params = "/fmt addr", |
| .help = "virtual memory dump starting at 'addr'", |
| .mhandler.cmd = do_memory_dump, |
| }, |
| |
| STEXI |
| @item x/fmt @var{addr} |
| @findex x |
| Virtual memory dump starting at @var{addr}. |
| ETEXI |
| |
| { |
| .name = "xp", |
| .args_type = "fmt:/,addr:l", |
| .params = "/fmt addr", |
| .help = "physical memory dump starting at 'addr'", |
| .mhandler.cmd = do_physical_memory_dump, |
| }, |
| |
| STEXI |
| @item xp /@var{fmt} @var{addr} |
| @findex xp |
| Physical memory dump starting at @var{addr}. |
| |
| @var{fmt} is a format which tells the command how to format the |
| data. Its syntax is: @option{/@{count@}@{format@}@{size@}} |
| |
| @table @var |
| @item count |
| is the number of items to be dumped. |
| |
| @item format |
| can be x (hex), d (signed decimal), u (unsigned decimal), o (octal), |
| c (char) or i (asm instruction). |
| |
| @item size |
| can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86, |
| @code{h} or @code{w} can be specified with the @code{i} format to |
| respectively select 16 or 32 bit code instruction size. |
| |
| @end table |
| |
| Examples: |
| @itemize |
| @item |
| Dump 10 instructions at the current instruction pointer: |
| @example |
| (qemu) x/10i $eip |
| 0x90107063: ret |
| 0x90107064: sti |
| 0x90107065: lea 0x0(%esi,1),%esi |
| 0x90107069: lea 0x0(%edi,1),%edi |
| 0x90107070: ret |
| 0x90107071: jmp 0x90107080 |
| 0x90107073: nop |
| 0x90107074: nop |
| 0x90107075: nop |
| 0x90107076: nop |
| @end example |
| |
| @item |
| Dump 80 16 bit values at the start of the video memory. |
| @smallexample |
| (qemu) xp/80hx 0xb8000 |
| 0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42 |
| 0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41 |
| 0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72 |
| 0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73 |
| 0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20 |
| 0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| @end smallexample |
| @end itemize |
| ETEXI |
| |
| { |
| .name = "p|print", |
| .args_type = "fmt:/,val:l", |
| .params = "/fmt expr", |
| .help = "print expression value (use $reg for CPU register access)", |
| .mhandler.cmd = do_print, |
| }, |
| |
| STEXI |
| @item p or print/@var{fmt} @var{expr} |
| @findex print |
| |
| Print expression value. Only the @var{format} part of @var{fmt} is |
| used. |
| ETEXI |
| |
| { |
| .name = "i", |
| .args_type = "fmt:/,addr:i,index:i.", |
| .params = "/fmt addr", |
| .help = "I/O port read", |
| .mhandler.cmd = do_ioport_read, |
| }, |
| |
| STEXI |
| Read I/O port. |
| ETEXI |
| |
| { |
| .name = "o", |
| .args_type = "fmt:/,addr:i,val:i", |
| .params = "/fmt addr value", |
| .help = "I/O port write", |
| .mhandler.cmd = do_ioport_write, |
| }, |
| |
| STEXI |
| Write to I/O port. |
| ETEXI |
| |
| { |
| .name = "sendkey", |
| .args_type = "string:s,hold_time:i?", |
| .params = "keys [hold_ms]", |
| .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)", |
| .mhandler.cmd = do_sendkey, |
| }, |
| |
| STEXI |
| @item sendkey @var{keys} |
| @findex sendkey |
| |
| Send @var{keys} to the emulator. @var{keys} could be the name of the |
| key or @code{#} followed by the raw value in either decimal or hexadecimal |
| format. Use @code{-} to press several keys simultaneously. Example: |
| @example |
| sendkey ctrl-alt-f1 |
| @end example |
| |
| This command is useful to send keys that your graphical user interface |
| intercepts at low level, such as @code{ctrl-alt-f1} in X Window. |
| ETEXI |
| |
| { |
| .name = "system_reset", |
| .args_type = "", |
| .params = "", |
| .help = "reset the system", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_system_reset, |
| }, |
| |
| STEXI |
| @item system_reset |
| @findex system_reset |
| |
| Reset the system. |
| ETEXI |
| SQMP |
| system_reset |
| ------------ |
| |
| Reset the system. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "system_reset" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "system_powerdown", |
| .args_type = "", |
| .params = "", |
| .help = "send system power down event", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_system_powerdown, |
| }, |
| |
| STEXI |
| @item system_powerdown |
| @findex system_powerdown |
| |
| Power down the system (if supported). |
| ETEXI |
| SQMP |
| system_powerdown |
| ---------------- |
| |
| Send system power down event. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "system_powerdown" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "sum", |
| .args_type = "start:i,size:i", |
| .params = "addr size", |
| .help = "compute the checksum of a memory region", |
| .mhandler.cmd = do_sum, |
| }, |
| |
| STEXI |
| @item sum @var{addr} @var{size} |
| @findex sum |
| |
| Compute the checksum of a memory region. |
| ETEXI |
| |
| { |
| .name = "usb_add", |
| .args_type = "devname:s", |
| .params = "device", |
| .help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')", |
| .mhandler.cmd = do_usb_add, |
| }, |
| |
| STEXI |
| @item usb_add @var{devname} |
| @findex usb_add |
| |
| Add the USB device @var{devname}. For details of available devices see |
| @ref{usb_devices} |
| ETEXI |
| |
| { |
| .name = "usb_del", |
| .args_type = "devname:s", |
| .params = "device", |
| .help = "remove USB device 'bus.addr'", |
| .mhandler.cmd = do_usb_del, |
| }, |
| |
| STEXI |
| @item usb_del @var{devname} |
| @findex usb_del |
| |
| Remove the USB device @var{devname} from the QEMU virtual USB |
| hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor |
| command @code{info usb} to see the devices you can remove. |
| ETEXI |
| |
| { |
| .name = "device_add", |
| .args_type = "device:O", |
| .params = "driver[,prop=value][,...]", |
| .help = "add device, like -device on the command line", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_device_add, |
| }, |
| |
| STEXI |
| @item device_add @var{config} |
| @findex device_add |
| |
| Add device. |
| ETEXI |
| SQMP |
| device_add |
| ---------- |
| |
| Add a device. |
| |
| Arguments: |
| |
| - "driver": the name of the new device's driver (json-string) |
| - "bus": the device's parent bus (device tree path, json-string, optional) |
| - "id": the device's ID, must be unique (json-string) |
| - device properties |
| |
| Example: |
| |
| -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) For detailed information about this command, please refer to the |
| 'docs/qdev-device-use.txt' file. |
| |
| (2) It's possible to list device properties by running QEMU with the |
| "-device DEVICE,\?" command-line argument, where DEVICE is the device's name |
| |
| EQMP |
| |
| { |
| .name = "device_del", |
| .args_type = "id:s", |
| .params = "device", |
| .help = "remove device", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_device_del, |
| }, |
| |
| STEXI |
| @item device_del @var{id} |
| @findex device_del |
| |
| Remove device @var{id}. |
| ETEXI |
| SQMP |
| device_del |
| ---------- |
| |
| Remove a device. |
| |
| Arguments: |
| |
| - "id": the device's ID (json-string) |
| |
| Example: |
| |
| -> { "execute": "device_del", "arguments": { "id": "net1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "cpu", |
| .args_type = "index:i", |
| .params = "index", |
| .help = "set the default CPU", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_cpu_set, |
| }, |
| |
| STEXI |
| @item cpu @var{index} |
| @findex cpu |
| Set the default CPU. |
| ETEXI |
| SQMP |
| cpu |
| --- |
| |
| Set the default CPU. |
| |
| Arguments: |
| |
| - "index": the CPU's index (json-int) |
| |
| Example: |
| |
| -> { "execute": "cpu", "arguments": { "index": 0 } } |
| <- { "return": {} } |
| |
| Note: CPUs' indexes are obtained with the 'query-cpus' command. |
| |
| EQMP |
| |
| { |
| .name = "mouse_move", |
| .args_type = "dx_str:s,dy_str:s,dz_str:s?", |
| .params = "dx dy [dz]", |
| .help = "send mouse move events", |
| .mhandler.cmd = do_mouse_move, |
| }, |
| |
| STEXI |
| @item mouse_move @var{dx} @var{dy} [@var{dz}] |
| @findex mouse_move |
| Move the active mouse to the specified coordinates @var{dx} @var{dy} |
| with optional scroll axis @var{dz}. |
| ETEXI |
| |
| { |
| .name = "mouse_button", |
| .args_type = "button_state:i", |
| .params = "state", |
| .help = "change mouse button state (1=L, 2=M, 4=R)", |
| .mhandler.cmd = do_mouse_button, |
| }, |
| |
| STEXI |
| @item mouse_button @var{val} |
| @findex mouse_button |
| Change the active mouse button state @var{val} (1=L, 2=M, 4=R). |
| ETEXI |
| |
| { |
| .name = "mouse_set", |
| .args_type = "index:i", |
| .params = "index", |
| .help = "set which mouse device receives events", |
| .mhandler.cmd = do_mouse_set, |
| }, |
| |
| STEXI |
| @item mouse_set @var{index} |
| @findex mouse_set |
| Set which mouse device receives events at given @var{index}, index |
| can be obtained with |
| @example |
| info mice |
| @end example |
| ETEXI |
| |
| #ifdef HAS_AUDIO |
| { |
| .name = "wavcapture", |
| .args_type = "path:F,freq:i?,bits:i?,nchannels:i?", |
| .params = "path [frequency [bits [channels]]]", |
| .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", |
| .mhandler.cmd = do_wav_capture, |
| }, |
| #endif |
| STEXI |
| @item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]] |
| @findex wavcapture |
| Capture audio into @var{filename}. Using sample rate @var{frequency} |
| bits per sample @var{bits} and number of channels @var{channels}. |
| |
| Defaults: |
| @itemize @minus |
| @item Sample rate = 44100 Hz - CD quality |
| @item Bits = 16 |
| @item Number of channels = 2 - Stereo |
| @end itemize |
| ETEXI |
| |
| #ifdef HAS_AUDIO |
| { |
| .name = "stopcapture", |
| .args_type = "n:i", |
| .params = "capture index", |
| .help = "stop capture", |
| .mhandler.cmd = do_stop_capture, |
| }, |
| #endif |
| STEXI |
| @item stopcapture @var{index} |
| @findex stopcapture |
| Stop capture with a given @var{index}, index can be obtained with |
| @example |
| info capture |
| @end example |
| ETEXI |
| |
| { |
| .name = "memsave", |
| .args_type = "val:l,size:i,filename:s", |
| .params = "addr size file", |
| .help = "save to disk virtual memory dump starting at 'addr' of size 'size'", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_memory_save, |
| }, |
| |
| STEXI |
| @item memsave @var{addr} @var{size} @var{file} |
| @findex memsave |
| save to disk virtual memory dump starting at @var{addr} of size @var{size}. |
| ETEXI |
| SQMP |
| memsave |
| ------- |
| |
| Save to disk virtual memory dump starting at 'val' of size 'size'. |
| |
| Arguments: |
| |
| - "val": the starting address (json-int) |
| - "size": the memory size, in bytes (json-int) |
| - "filename": file path (json-string) |
| |
| Example: |
| |
| -> { "execute": "memsave", |
| "arguments": { "val": 10, |
| "size": 100, |
| "filename": "/tmp/virtual-mem-dump" } } |
| <- { "return": {} } |
| |
| Note: Depends on the current CPU. |
| |
| EQMP |
| |
| { |
| .name = "pmemsave", |
| .args_type = "val:l,size:i,filename:s", |
| .params = "addr size file", |
| .help = "save to disk physical memory dump starting at 'addr' of size 'size'", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_physical_memory_save, |
| }, |
| |
| STEXI |
| @item pmemsave @var{addr} @var{size} @var{file} |
| @findex pmemsave |
| save to disk physical memory dump starting at @var{addr} of size @var{size}. |
| ETEXI |
| SQMP |
| pmemsave |
| -------- |
| |
| Save to disk physical memory dump starting at 'val' of size 'size'. |
| |
| Arguments: |
| |
| - "val": the starting address (json-int) |
| - "size": the memory size, in bytes (json-int) |
| - "filename": file path (json-string) |
| |
| Example: |
| |
| -> { "execute": "pmemsave", |
| "arguments": { "val": 10, |
| "size": 100, |
| "filename": "/tmp/physical-mem-dump" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "boot_set", |
| .args_type = "bootdevice:s", |
| .params = "bootdevice", |
| .help = "define new values for the boot device list", |
| .mhandler.cmd = do_boot_set, |
| }, |
| |
| STEXI |
| @item boot_set @var{bootdevicelist} |
| @findex boot_set |
| |
| Define new values for the boot device list. Those values will override |
| the values specified on the command line through the @code{-boot} option. |
| |
| The values that can be specified here depend on the machine type, but are |
| the same that can be specified in the @code{-boot} command line option. |
| ETEXI |
| |
| #if defined(TARGET_I386) |
| { |
| .name = "nmi", |
| .args_type = "cpu_index:i", |
| .params = "cpu", |
| .help = "inject an NMI on the given CPU", |
| .mhandler.cmd = do_inject_nmi, |
| }, |
| #endif |
| STEXI |
| @item nmi @var{cpu} |
| @findex nmi |
| Inject an NMI on the given CPU (x86 only). |
| ETEXI |
| |
| { |
| .name = "migrate", |
| .args_type = "detach:-d,blk:-b,inc:-i,uri:s", |
| .params = "[-d] [-b] [-i] uri", |
| .help = "migrate to URI (using -d to not wait for completion)" |
| "\n\t\t\t -b for migration without shared storage with" |
| " full copy of disk\n\t\t\t -i for migration without " |
| "shared storage with incremental copy of disk " |
| "(base image shared between src and destination)", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_migrate, |
| }, |
| |
| |
| STEXI |
| @item migrate [-d] [-b] [-i] @var{uri} |
| @findex migrate |
| Migrate to @var{uri} (using -d to not wait for completion). |
| -b for migration with full copy of disk |
| -i for migration with incremental copy of disk (base image is shared) |
| ETEXI |
| SQMP |
| migrate |
| ------- |
| |
| Migrate to URI. |
| |
| Arguments: |
| |
| - "blk": block migration, full disk copy (json-bool, optional) |
| - "inc": incremental disk copy (json-bool, optional) |
| - "uri": Destination URI (json-string) |
| |
| Example: |
| |
| -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } } |
| <- { "return": {} } |
| |
| Notes: |
| |
| (1) The 'query-migrate' command should be used to check migration's progress |
| and final result (this information is provided by the 'status' member) |
| (2) All boolean arguments default to false |
| (3) The user Monitor's "detach" argument is invalid in QMP and should not |
| be used |
| |
| EQMP |
| |
| { |
| .name = "migrate_cancel", |
| .args_type = "", |
| .params = "", |
| .help = "cancel the current VM migration", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_migrate_cancel, |
| }, |
| |
| STEXI |
| @item migrate_cancel |
| @findex migrate_cancel |
| Cancel the current VM migration. |
| ETEXI |
| SQMP |
| migrate_cancel |
| -------------- |
| |
| Cancel the current migration. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "migrate_cancel" } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "migrate_set_speed", |
| .args_type = "value:f", |
| .params = "value", |
| .help = "set maximum speed (in bytes) for migrations", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_migrate_set_speed, |
| }, |
| |
| STEXI |
| @item migrate_set_speed @var{value} |
| @findex migrate_set_speed |
| Set maximum speed to @var{value} (in bytes) for migrations. |
| ETEXI |
| SQMP |
| migrate_set_speed |
| ----------------- |
| |
| Set maximum speed for migrations. |
| |
| Arguments: |
| |
| - "value": maximum speed, in bytes per second (json-number) |
| |
| Example: |
| |
| -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "migrate_set_downtime", |
| .args_type = "value:T", |
| .params = "value", |
| .help = "set maximum tolerated downtime (in seconds) for migrations", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_migrate_set_downtime, |
| }, |
| |
| STEXI |
| @item migrate_set_downtime @var{second} |
| @findex migrate_set_downtime |
| Set maximum tolerated downtime (in seconds) for migration. |
| ETEXI |
| SQMP |
| migrate_set_downtime |
| -------------------- |
| |
| Set maximum tolerated downtime (in seconds) for migrations. |
| |
| Arguments: |
| |
| - "value": maximum downtime (json-number) |
| |
| Example: |
| |
| -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| #if defined(TARGET_I386) |
| { |
| .name = "drive_add", |
| .args_type = "pci_addr:s,opts:s", |
| .params = "[[<domain>:]<bus>:]<slot>\n" |
| "[file=file][,if=type][,bus=n]\n" |
| "[,unit=m][,media=d][index=i]\n" |
| "[,cyls=c,heads=h,secs=s[,trans=t]]\n" |
| "[snapshot=on|off][,cache=on|off]", |
| .help = "add drive to PCI storage controller", |
| .mhandler.cmd = drive_hot_add, |
| }, |
| #endif |
| |
| STEXI |
| @item drive_add |
| @findex drive_add |
| Add drive to PCI storage controller. |
| ETEXI |
| |
| #if defined(TARGET_I386) |
| { |
| .name = "pci_add", |
| .args_type = "pci_addr:s,type:s,opts:s?", |
| .params = "auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...", |
| .help = "hot-add PCI device", |
| .mhandler.cmd = pci_device_hot_add, |
| }, |
| #endif |
| |
| STEXI |
| @item pci_add |
| @findex pci_add |
| Hot-add PCI device. |
| ETEXI |
| |
| #if defined(TARGET_I386) |
| { |
| .name = "pci_del", |
| .args_type = "pci_addr:s", |
| .params = "[[<domain>:]<bus>:]<slot>", |
| .help = "hot remove PCI device", |
| .mhandler.cmd = do_pci_device_hot_remove, |
| }, |
| #endif |
| |
| STEXI |
| @item pci_del |
| @findex pci_del |
| Hot remove PCI device. |
| ETEXI |
| |
| { |
| .name = "host_net_add", |
| .args_type = "device:s,opts:s?", |
| .params = "tap|user|socket|vde|dump [options]", |
| .help = "add host VLAN client", |
| .mhandler.cmd = net_host_device_add, |
| }, |
| |
| STEXI |
| @item host_net_add |
| @findex host_net_add |
| Add host VLAN client. |
| ETEXI |
| |
| { |
| .name = "host_net_remove", |
| .args_type = "vlan_id:i,device:s", |
| .params = "vlan_id name", |
| .help = "remove host VLAN client", |
| .mhandler.cmd = net_host_device_remove, |
| }, |
| |
| STEXI |
| @item host_net_remove |
| @findex host_net_remove |
| Remove host VLAN client. |
| ETEXI |
| |
| { |
| .name = "netdev_add", |
| .args_type = "netdev:O", |
| .params = "[user|tap|socket],id=str[,prop=value][,...]", |
| .help = "add host network device", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_netdev_add, |
| }, |
| |
| STEXI |
| @item netdev_add |
| @findex netdev_add |
| Add host network device. |
| ETEXI |
| SQMP |
| netdev_add |
| ---------- |
| |
| Add host network device. |
| |
| Arguments: |
| |
| - "type": the device type, "tap", "user", ... (json-string) |
| - "id": the device's ID, must be unique (json-string) |
| - device options |
| |
| Example: |
| |
| -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } |
| <- { "return": {} } |
| |
| Note: The supported device options are the same ones supported by the '-net' |
| command-line argument, which are listed in the '-help' output or QEMU's |
| manual |
| |
| EQMP |
| |
| { |
| .name = "netdev_del", |
| .args_type = "id:s", |
| .params = "id", |
| .help = "remove host network device", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_netdev_del, |
| }, |
| |
| STEXI |
| @item netdev_del |
| @findex netdev_del |
| Remove host network device. |
| ETEXI |
| SQMP |
| netdev_del |
| ---------- |
| |
| Remove host network device. |
| |
| Arguments: |
| |
| - "id": the device's ID, must be unique (json-string) |
| |
| Example: |
| |
| -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| #ifdef CONFIG_SLIRP |
| { |
| .name = "hostfwd_add", |
| .args_type = "arg1:s,arg2:s?,arg3:s?", |
| .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport", |
| .help = "redirect TCP or UDP connections from host to guest (requires -net user)", |
| .mhandler.cmd = net_slirp_hostfwd_add, |
| }, |
| #endif |
| STEXI |
| @item hostfwd_add |
| @findex hostfwd_add |
| Redirect TCP or UDP connections from host to guest (requires -net user). |
| ETEXI |
| |
| #ifdef CONFIG_SLIRP |
| { |
| .name = "hostfwd_remove", |
| .args_type = "arg1:s,arg2:s?,arg3:s?", |
| .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport", |
| .help = "remove host-to-guest TCP or UDP redirection", |
| .mhandler.cmd = net_slirp_hostfwd_remove, |
| }, |
| |
| #endif |
| STEXI |
| @item hostfwd_remove |
| @findex hostfwd_remove |
| Remove host-to-guest TCP or UDP redirection. |
| ETEXI |
| |
| { |
| .name = "balloon", |
| .args_type = "value:M", |
| .params = "target", |
| .help = "request VM to change its memory allocation (in MB)", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_async = do_balloon, |
| .flags = MONITOR_CMD_ASYNC, |
| }, |
| |
| STEXI |
| @item balloon @var{value} |
| @findex balloon |
| Request VM to change its memory allocation to @var{value} (in MB). |
| ETEXI |
| SQMP |
| balloon |
| ------- |
| |
| Request VM to change its memory allocation (in bytes). |
| |
| Arguments: |
| |
| - "value": New memory allocation (json-int) |
| |
| Example: |
| |
| -> { "execute": "balloon", "arguments": { "value": 536870912 } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "set_link", |
| .args_type = "name:s,up:b", |
| .params = "name on|off", |
| .help = "change the link status of a network adapter", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_set_link, |
| }, |
| |
| STEXI |
| @item set_link @var{name} [on|off] |
| @findex set_link |
| Switch link @var{name} on (i.e. up) or off (i.e. down). |
| ETEXI |
| SQMP |
| set_link |
| -------- |
| |
| Change the link status of a network adapter. |
| |
| Arguments: |
| |
| - "name": network device name (json-string) |
| - "up": status is up (json-bool) |
| |
| Example: |
| |
| -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "watchdog_action", |
| .args_type = "action:s", |
| .params = "[reset|shutdown|poweroff|pause|debug|none]", |
| .help = "change watchdog action", |
| .mhandler.cmd = do_watchdog_action, |
| }, |
| |
| STEXI |
| @item watchdog_action |
| @findex watchdog_action |
| Change watchdog action. |
| ETEXI |
| |
| { |
| .name = "acl_show", |
| .args_type = "aclname:s", |
| .params = "aclname", |
| .help = "list rules in the access control list", |
| .mhandler.cmd = do_acl_show, |
| }, |
| |
| STEXI |
| @item acl_show @var{aclname} |
| @findex acl_show |
| List all the matching rules in the access control list, and the default |
| policy. There are currently two named access control lists, |
| @var{vnc.x509dname} and @var{vnc.username} matching on the x509 client |
| certificate distinguished name, and SASL username respectively. |
| ETEXI |
| |
| { |
| .name = "acl_policy", |
| .args_type = "aclname:s,policy:s", |
| .params = "aclname allow|deny", |
| .help = "set default access control list policy", |
| .mhandler.cmd = do_acl_policy, |
| }, |
| |
| STEXI |
| @item acl_policy @var{aclname} @code{allow|deny} |
| @findex acl_policy |
| Set the default access control list policy, used in the event that |
| none of the explicit rules match. The default policy at startup is |
| always @code{deny}. |
| ETEXI |
| |
| { |
| .name = "acl_add", |
| .args_type = "aclname:s,match:s,policy:s,index:i?", |
| .params = "aclname match allow|deny [index]", |
| .help = "add a match rule to the access control list", |
| .mhandler.cmd = do_acl_add, |
| }, |
| |
| STEXI |
| @item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}] |
| @findex acl_add |
| Add a match rule to the access control list, allowing or denying access. |
| The match will normally be an exact username or x509 distinguished name, |
| but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to |
| allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will |
| normally be appended to the end of the ACL, but can be inserted |
| earlier in the list if the optional @var{index} parameter is supplied. |
| ETEXI |
| |
| { |
| .name = "acl_remove", |
| .args_type = "aclname:s,match:s", |
| .params = "aclname match", |
| .help = "remove a match rule from the access control list", |
| .mhandler.cmd = do_acl_remove, |
| }, |
| |
| STEXI |
| @item acl_remove @var{aclname} @var{match} |
| @findex acl_remove |
| Remove the specified match rule from the access control list. |
| ETEXI |
| |
| { |
| .name = "acl_reset", |
| .args_type = "aclname:s", |
| .params = "aclname", |
| .help = "reset the access control list", |
| .mhandler.cmd = do_acl_reset, |
| }, |
| |
| STEXI |
| @item acl_reset @var{aclname} |
| @findex acl_reset |
| Remove all matches from the access control list, and set the default |
| policy back to @code{deny}. |
| ETEXI |
| |
| #if defined(TARGET_I386) |
| |
| { |
| .name = "mce", |
| .args_type = "cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", |
| .params = "cpu bank status mcgstatus addr misc", |
| .help = "inject a MCE on the given CPU", |
| .mhandler.cmd = do_inject_mce, |
| }, |
| |
| #endif |
| STEXI |
| @item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc} |
| @findex mce (x86) |
| Inject an MCE on the given CPU (x86 only). |
| ETEXI |
| |
| { |
| .name = "getfd", |
| .args_type = "fdname:s", |
| .params = "getfd name", |
| .help = "receive a file descriptor via SCM rights and assign it a name", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_getfd, |
| }, |
| |
| STEXI |
| @item getfd @var{fdname} |
| @findex getfd |
| If a file descriptor is passed alongside this command using the SCM_RIGHTS |
| mechanism on unix sockets, it is stored using the name @var{fdname} for |
| later use by other monitor commands. |
| ETEXI |
| SQMP |
| getfd |
| ----- |
| |
| Receive a file descriptor via SCM rights and assign it a name. |
| |
| Arguments: |
| |
| - "fdname": file descriptor name (json-string) |
| |
| Example: |
| |
| -> { "execute": "getfd", "arguments": { "fdname": "fd1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "closefd", |
| .args_type = "fdname:s", |
| .params = "closefd name", |
| .help = "close a file descriptor previously passed via SCM rights", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_closefd, |
| }, |
| |
| STEXI |
| @item closefd @var{fdname} |
| @findex closefd |
| Close the file descriptor previously assigned to @var{fdname} using the |
| @code{getfd} command. This is only needed if the file descriptor was never |
| used by another monitor command. |
| ETEXI |
| SQMP |
| closefd |
| ------- |
| |
| Close a file descriptor previously passed via SCM rights. |
| |
| Arguments: |
| |
| - "fdname": file descriptor name (json-string) |
| |
| Example: |
| |
| -> { "execute": "closefd", "arguments": { "fdname": "fd1" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "block_passwd", |
| .args_type = "device:B,password:s", |
| .params = "block_passwd device password", |
| .help = "set the password of encrypted block devices", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_block_set_passwd, |
| }, |
| |
| STEXI |
| @item block_passwd @var{device} @var{password} |
| @findex block_passwd |
| Set the encrypted device @var{device} password to @var{password} |
| ETEXI |
| SQMP |
| block_passwd |
| ------------ |
| |
| Set the password of encrypted block devices. |
| |
| Arguments: |
| |
| - "device": device name (json-string) |
| - "password": password (json-string) |
| |
| Example: |
| |
| -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0", |
| "password": "12345" } } |
| <- { "return": {} } |
| |
| EQMP |
| |
| { |
| .name = "qmp_capabilities", |
| .args_type = "", |
| .params = "", |
| .help = "enable QMP capabilities", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_qmp_capabilities, |
| }, |
| |
| STEXI |
| @item qmp_capabilities |
| @findex qmp_capabilities |
| Enable the specified QMP capabilities |
| ETEXI |
| SQMP |
| qmp_capabilities |
| ---------------- |
| |
| Enable QMP capabilities. |
| |
| Arguments: None. |
| |
| Example: |
| |
| -> { "execute": "qmp_capabilities" } |
| <- { "return": {} } |
| |
| Note: This command must be issued before issuing any other command. |
| |
| EQMP |
| |
| |
| HXCOMM Keep the 'info' command at the end! |
| HXCOMM This is required for the QMP documentation layout. |
| |
| SQMP |
| |
| 2. Query Commands |
| ================= |
| |
| EQMP |
| |
| { |
| .name = "info", |
| .args_type = "item:s?", |
| .params = "[subcommand]", |
| .help = "show various information about the system state", |
| .user_print = monitor_user_noop, |
| .mhandler.cmd_new = do_info, |
| }, |
| |
| STEXI |
| @item info @var{subcommand} |
| @findex info |
| Show various information about the system state. |
| |
| @table @option |
| @item info version |
| show the version of QEMU |
| ETEXI |
| SQMP |
| query-version |
| ------------- |
| |
| Show QEMU version. |
| |
| Return a json-object with the following information: |
| |
| - "qemu": QEMU's version (json-string) |
| - "package": package's version (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-version" } |
| <- { "return": { "qemu": "0.11.50", "package": "" } } |
| |
| EQMP |
| |
| STEXI |
| @item info commands |
| list QMP available commands |
| ETEXI |
| SQMP |
| query-commands |
| -------------- |
| |
| List QMP available commands. |
| |
| Each command is represented by a json-object, the returned value is a json-array |
| of all commands. |
| |
| Each json-object contain: |
| |
| - "name": command's name (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-commands" } |
| <- { |
| "return":[ |
| { |
| "name":"query-balloon" |
| }, |
| { |
| "name":"system_powerdown" |
| } |
| ] |
| } |
| |
| Note: This example has been shortened as the real response is too long. |
| |
| EQMP |
| |
| STEXI |
| @item info network |
| show the various VLANs and the associated devices |
| ETEXI |
| |
| STEXI |
| @item info chardev |
| show the character devices |
| ETEXI |
| SQMP |
| query-chardev |
| ------------- |
| |
| Each device is represented by a json-object. The returned value is a json-array |
| of all devices. |
| |
| Each json-object contain the following: |
| |
| - "label": device's label (json-string) |
| - "filename": device's file (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-chardev" } |
| <- { |
| "return":[ |
| { |
| "label":"monitor", |
| "filename":"stdio" |
| }, |
| { |
| "label":"serial0", |
| "filename":"vc" |
| } |
| ] |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info block |
| show the block devices |
| ETEXI |
| SQMP |
| query-block |
| ----------- |
| |
| Show the block devices. |
| |
| Each block device information is stored in a json-object and the returned value |
| is a json-array of all devices. |
| |
| Each json-object contain the following: |
| |
| - "device": device name (json-string) |
| - "type": device type (json-string) |
| - Possible values: "hd", "cdrom", "floppy", "unknown" |
| - "removable": true if the device is removable, false otherwise (json-bool) |
| - "locked": true if the device is locked, false otherwise (json-bool) |
| - "inserted": only present if the device is inserted, it is a json-object |
| containing the following: |
| - "file": device file name (json-string) |
| - "ro": true if read-only, false otherwise (json-bool) |
| - "drv": driver format name (json-string) |
| - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg", |
| "file", "file", "ftp", "ftps", "host_cdrom", |
| "host_device", "host_floppy", "http", "https", |
| "nbd", "parallels", "qcow", "qcow2", "raw", |
| "tftp", "vdi", "vmdk", "vpc", "vvfat" |
| - "backing_file": backing file name (json-string, optional) |
| - "encrypted": true if encrypted, false otherwise (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-block" } |
| <- { |
| "return":[ |
| { |
| "device":"ide0-hd0", |
| "locked":false, |
| "removable":false, |
| "inserted":{ |
| "ro":false, |
| "drv":"qcow2", |
| "encrypted":false, |
| "file":"disks/test.img" |
| }, |
| "type":"hd" |
| }, |
| { |
| "device":"ide1-cd0", |
| "locked":false, |
| "removable":true, |
| "type":"cdrom" |
| }, |
| { |
| "device":"floppy0", |
| "locked":false, |
| "removable":true, |
| "type": "floppy" |
| }, |
| { |
| "device":"sd0", |
| "locked":false, |
| "removable":true, |
| "type":"floppy" |
| } |
| ] |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info blockstats |
| show block device statistics |
| ETEXI |
| SQMP |
| query-blockstats |
| ---------------- |
| |
| Show block device statistics. |
| |
| Each device statistic information is stored in a json-object and the returned |
| value is a json-array of all devices. |
| |
| Each json-object contain the following: |
| |
| - "device": device name (json-string) |
| - "stats": A json-object with the statistics information, it contains: |
| - "rd_bytes": bytes read (json-int) |
| - "wr_bytes": bytes written (json-int) |
| - "rd_operations": read operations (json-int) |
| - "wr_operations": write operations (json-int) |
| - "wr_highest_offset": Highest offset of a sector written since the |
| BlockDriverState has been opened (json-int) |
| - "parent": Contains recursively the statistics of the underlying |
| protocol (e.g. the host file for a qcow2 image). If there is |
| no underlying protocol, this field is omitted |
| (json-object, optional) |
| |
| Example: |
| |
| -> { "execute": "query-blockstats" } |
| <- { |
| "return":[ |
| { |
| "device":"ide0-hd0", |
| "parent":{ |
| "stats":{ |
| "wr_highest_offset":3686448128, |
| "wr_bytes":9786368, |
| "wr_operations":751, |
| "rd_bytes":122567168, |
| "rd_operations":36772 |
| } |
| }, |
| "stats":{ |
| "wr_highest_offset":2821110784, |
| "wr_bytes":9786368, |
| "wr_operations":692, |
| "rd_bytes":122739200, |
| "rd_operations":36604 |
| } |
| }, |
| { |
| "device":"ide1-cd0", |
| "stats":{ |
| "wr_highest_offset":0, |
| "wr_bytes":0, |
| "wr_operations":0, |
| "rd_bytes":0, |
| "rd_operations":0 |
| } |
| }, |
| { |
| "device":"floppy0", |
| "stats":{ |
| "wr_highest_offset":0, |
| "wr_bytes":0, |
| "wr_operations":0, |
| "rd_bytes":0, |
| "rd_operations":0 |
| } |
| }, |
| { |
| "device":"sd0", |
| "stats":{ |
| "wr_highest_offset":0, |
| "wr_bytes":0, |
| "wr_operations":0, |
| "rd_bytes":0, |
| "rd_operations":0 |
| } |
| } |
| ] |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info registers |
| show the cpu registers |
| @item info cpus |
| show infos for each CPU |
| ETEXI |
| SQMP |
| query-cpus |
| ---------- |
| |
| Show CPU information. |
| |
| Return a json-array. Each CPU is represented by a json-object, which contains: |
| |
| - "CPU": CPU index (json-int) |
| - "current": true if this is the current CPU, false otherwise (json-bool) |
| - "halted": true if the cpu is halted, false otherwise (json-bool) |
| - Current program counter. The key's name depends on the architecture: |
| "pc": i386/x86_64 (json-int) |
| "nip": PPC (json-int) |
| "pc" and "npc": sparc (json-int) |
| "PC": mips (json-int) |
| |
| Example: |
| |
| -> { "execute": "query-cpus" } |
| <- { |
| "return":[ |
| { |
| "CPU":0, |
| "current":true, |
| "halted":false, |
| "pc":3227107138 |
| }, |
| { |
| "CPU":1, |
| "current":false, |
| "halted":true, |
| "pc":7108165 |
| } |
| ] |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info history |
| show the command line history |
| @item info irq |
| show the interrupts statistics (if available) |
| @item info pic |
| show i8259 (PIC) state |
| ETEXI |
| |
| STEXI |
| @item info pci |
| show emulated PCI device info |
| ETEXI |
| SQMP |
| query-pci |
| --------- |
| |
| PCI buses and devices information. |
| |
| The returned value is a json-array of all buses. Each bus is represented by |
| a json-object, which has a key with a json-array of all PCI devices attached |
| to it. Each device is represented by a json-object. |
| |
| The bus json-object contains the following: |
| |
| - "bus": bus number (json-int) |
| - "devices": a json-array of json-objects, each json-object represents a |
| PCI device |
| |
| The PCI device json-object contains the following: |
| |
| - "bus": identical to the parent's bus number (json-int) |
| - "slot": slot number (json-int) |
| - "function": function number (json-int) |
| - "class_info": a json-object containing: |
| - "desc": device class description (json-string, optional) |
| - "class": device class number (json-int) |
| - "id": a json-object containing: |
| - "device": device ID (json-int) |
| - "vendor": vendor ID (json-int) |
| - "irq": device's IRQ if assigned (json-int, optional) |
| - "qdev_id": qdev id string (json-string) |
| - "pci_bridge": It's a json-object, only present if this device is a |
| PCI bridge, contains: |
| - "bus": bus number (json-int) |
| - "secondary": secondary bus number (json-int) |
| - "subordinate": subordinate bus number (json-int) |
| - "io_range": I/O memory range information, a json-object with the |
| following members: |
| - "base": base address, in bytes (json-int) |
| - "limit": limit address, in bytes (json-int) |
| - "memory_range": memory range information, a json-object with the |
| following members: |
| - "base": base address, in bytes (json-int) |
| - "limit": limit address, in bytes (json-int) |
| - "prefetchable_range": Prefetchable memory range information, a |
| json-object with the following members: |
| - "base": base address, in bytes (json-int) |
| - "limit": limit address, in bytes (json-int) |
| - "devices": a json-array of PCI devices if there's any attached, each |
| each element is represented by a json-object, which contains |
| the same members of the 'PCI device json-object' described |
| above (optional) |
| - "regions": a json-array of json-objects, each json-object represents a |
| memory region of this device |
| |
| The memory range json-object contains the following: |
| |
| - "base": base memory address (json-int) |
| - "limit": limit value (json-int) |
| |
| The region json-object can be an I/O region or a memory region, an I/O region |
| json-object contains the following: |
| |
| - "type": "io" (json-string, fixed) |
| - "bar": BAR number (json-int) |
| - "address": memory address (json-int) |
| - "size": memory size (json-int) |
| |
| A memory region json-object contains the following: |
| |
| - "type": "memory" (json-string, fixed) |
| - "bar": BAR number (json-int) |
| - "address": memory address (json-int) |
| - "size": memory size (json-int) |
| - "mem_type_64": true or false (json-bool) |
| - "prefetch": true or false (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-pci" } |
| <- { |
| "return":[ |
| { |
| "bus":0, |
| "devices":[ |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":0, |
| "class_info":{ |
| "class":1536, |
| "desc":"Host bridge" |
| }, |
| "id":{ |
| "device":32902, |
| "vendor":4663 |
| }, |
| "function":0, |
| "regions":[ |
| |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":1, |
| "class_info":{ |
| "class":1537, |
| "desc":"ISA bridge" |
| }, |
| "id":{ |
| "device":32902, |
| "vendor":28672 |
| }, |
| "function":0, |
| "regions":[ |
| |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":1, |
| "class_info":{ |
| "class":257, |
| "desc":"IDE controller" |
| }, |
| "id":{ |
| "device":32902, |
| "vendor":28688 |
| }, |
| "function":1, |
| "regions":[ |
| { |
| "bar":4, |
| "size":16, |
| "address":49152, |
| "type":"io" |
| } |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "slot":2, |
| "class_info":{ |
| "class":768, |
| "desc":"VGA controller" |
| }, |
| "id":{ |
| "device":4115, |
| "vendor":184 |
| }, |
| "function":0, |
| "regions":[ |
| { |
| "prefetch":true, |
| "mem_type_64":false, |
| "bar":0, |
| "size":33554432, |
| "address":4026531840, |
| "type":"memory" |
| }, |
| { |
| "prefetch":false, |
| "mem_type_64":false, |
| "bar":1, |
| "size":4096, |
| "address":4060086272, |
| "type":"memory" |
| }, |
| { |
| "prefetch":false, |
| "mem_type_64":false, |
| "bar":6, |
| "size":65536, |
| "address":-1, |
| "type":"memory" |
| } |
| ] |
| }, |
| { |
| "bus":0, |
| "qdev_id":"", |
| "irq":11, |
| "slot":4, |
| "class_info":{ |
| "class":1280, |
| "desc":"RAM controller" |
| }, |
| "id":{ |
| "device":6900, |
| "vendor":4098 |
| }, |
| "function":0, |
| "regions":[ |
| { |
| "bar":0, |
| "size":32, |
| "address":49280, |
| "type":"io" |
| } |
| ] |
| } |
| ] |
| } |
| ] |
| } |
| |
| Note: This example has been shortened as the real response is too long. |
| |
| EQMP |
| |
| STEXI |
| @item info tlb |
| show virtual to physical memory mappings (i386 only) |
| @item info mem |
| show the active virtual memory mappings (i386 only) |
| ETEXI |
| |
| STEXI |
| @item info jit |
| show dynamic compiler info |
| @item info kvm |
| show KVM information |
| @item info numa |
| show NUMA information |
| ETEXI |
| |
| STEXI |
| @item info kvm |
| show KVM information |
| ETEXI |
| SQMP |
| query-kvm |
| --------- |
| |
| Show KVM information. |
| |
| Return a json-object with the following information: |
| |
| - "enabled": true if KVM support is enabled, false otherwise (json-bool) |
| - "present": true if QEMU has KVM support, false otherwise (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-kvm" } |
| <- { "return": { "enabled": true, "present": true } } |
| |
| EQMP |
| |
| STEXI |
| @item info usb |
| show USB devices plugged on the virtual USB hub |
| @item info usbhost |
| show all USB host devices |
| @item info profile |
| show profiling information |
| @item info capture |
| show information about active capturing |
| @item info snapshots |
| show list of VM snapshots |
| ETEXI |
| |
| STEXI |
| @item info status |
| show the current VM status (running|paused) |
| ETEXI |
| SQMP |
| query-status |
| ------------ |
| |
| Return a json-object with the following information: |
| |
| - "running": true if the VM is running, or false if it is paused (json-bool) |
| - "singlestep": true if the VM is in single step mode, |
| false otherwise (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-status" } |
| <- { "return": { "running": true, "singlestep": false } } |
| |
| EQMP |
| |
| STEXI |
| @item info pcmcia |
| show guest PCMCIA status |
| ETEXI |
| |
| STEXI |
| @item info mice |
| show which guest mouse is receiving events |
| ETEXI |
| SQMP |
| query-mice |
| ---------- |
| |
| Show VM mice information. |
| |
| Each mouse is represented by a json-object, the returned value is a json-array |
| of all mice. |
| |
| The mouse json-object contains the following: |
| |
| - "name": mouse's name (json-string) |
| - "index": mouse's index (json-int) |
| - "current": true if this mouse is receiving events, false otherwise (json-bool) |
| - "absolute": true if the mouse generates absolute input events (json-bool) |
| |
| Example: |
| |
| -> { "execute": "query-mice" } |
| <- { |
| "return":[ |
| { |
| "name":"QEMU Microsoft Mouse", |
| "index":0, |
| "current":false, |
| "absolute":false |
| }, |
| { |
| "name":"QEMU PS/2 Mouse", |
| "index":1, |
| "current":true, |
| "absolute":true |
| } |
| ] |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info vnc |
| show the vnc server status |
| ETEXI |
| SQMP |
| query-vnc |
| --------- |
| |
| Show VNC server information. |
| |
| Return a json-object with server information. Connected clients are returned |
| as a json-array of json-objects. |
| |
| The main json-object contains the following: |
| |
| - "enabled": true or false (json-bool) |
| - "host": server's IP address (json-string) |
| - "family": address family (json-string) |
| - Possible values: "ipv4", "ipv6", "unix", "unknown" |
| - "service": server's port number (json-string) |
| - "auth": authentication method (json-string) |
| - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight", |
| "tls", "ultra", "unknown", "vencrypt", "vencrypt", |
| "vencrypt+plain", "vencrypt+tls+none", |
| "vencrypt+tls+plain", "vencrypt+tls+sasl", |
| "vencrypt+tls+vnc", "vencrypt+x509+none", |
| "vencrypt+x509+plain", "vencrypt+x509+sasl", |
| "vencrypt+x509+vnc", "vnc" |
| - "clients": a json-array of all connected clients |
| |
| Clients are described by a json-object, each one contain the following: |
| |
| - "host": client's IP address (json-string) |
| - "family": address family (json-string) |
| - Possible values: "ipv4", "ipv6", "unix", "unknown" |
| - "service": client's port number (json-string) |
| - "x509_dname": TLS dname (json-string, optional) |
| - "sasl_username": SASL username (json-string, optional) |
| |
| Example: |
| |
| -> { "execute": "query-vnc" } |
| <- { |
| "return":{ |
| "enabled":true, |
| "host":"0.0.0.0", |
| "service":"50402", |
| "auth":"vnc", |
| "family":"ipv4", |
| "clients":[ |
| { |
| "host":"127.0.0.1", |
| "service":"50401", |
| "family":"ipv4" |
| } |
| ] |
| } |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info name |
| show the current VM name |
| ETEXI |
| SQMP |
| query-name |
| ---------- |
| |
| Show VM name. |
| |
| Return a json-object with the following information: |
| |
| - "name": VM's name (json-string, optional) |
| |
| Example: |
| |
| -> { "execute": "query-name" } |
| <- { "return": { "name": "qemu-name" } } |
| |
| EQMP |
| |
| STEXI |
| @item info uuid |
| show the current VM UUID |
| ETEXI |
| SQMP |
| query-uuid |
| ---------- |
| |
| Show VM UUID. |
| |
| Return a json-object with the following information: |
| |
| - "UUID": Universally Unique Identifier (json-string) |
| |
| Example: |
| |
| -> { "execute": "query-uuid" } |
| <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } |
| |
| EQMP |
| |
| STEXI |
| @item info cpustats |
| show CPU statistics |
| @item info usernet |
| show user network stack connection states |
| ETEXI |
| |
| STEXI |
| @item info migrate |
| show migration status |
| ETEXI |
| SQMP |
| query-migrate |
| ------------- |
| |
| Migration status. |
| |
| Return a json-object. If migration is active there will be another json-object |
| with RAM migration status and if block migration is active another one with |
| block migration status. |
| |
| The main json-object contains the following: |
| |
| - "status": migration status (json-string) |
| - Possible values: "active", "completed", "failed", "cancelled" |
| - "ram": only present if "status" is "active", it is a json-object with the |
| following RAM information (in bytes): |
| - "transferred": amount transferred (json-int) |
| - "remaining": amount remaining (json-int) |
| - "total": total (json-int) |
| - "disk": only present if "status" is "active" and it is a block migration, |
| it is a json-object with the following disk information (in bytes): |
| - "transferred": amount transferred (json-int) |
| - "remaining": amount remaining (json-int) |
| - "total": total (json-int) |
| |
| Examples: |
| |
| 1. Before the first migration |
| |
| -> { "execute": "query-migrate" } |
| <- { "return": {} } |
| |
| 2. Migration is done and has succeeded |
| |
| -> { "execute": "query-migrate" } |
| <- { "return": { "status": "completed" } } |
| |
| 3. Migration is done and has failed |
| |
| -> { "execute": "query-migrate" } |
| <- { "return": { "status": "failed" } } |
| |
| 4. Migration is being performed and is not a block migration: |
| |
| -> { "execute": "query-migrate" } |
| <- { |
| "return":{ |
| "status":"active", |
| "ram":{ |
| "transferred":123, |
| "remaining":123, |
| "total":246 |
| } |
| } |
| } |
| |
| 5. Migration is being performed and is a block migration: |
| |
| -> { "execute": "query-migrate" } |
| <- { |
| "return":{ |
| "status":"active", |
| "ram":{ |
| "total":1057024, |
| "remaining":1053304, |
| "transferred":3720 |
| }, |
| "disk":{ |
| "total":20971520, |
| "remaining":20880384, |
| "transferred":91136 |
| } |
| } |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info balloon |
| show balloon information |
| ETEXI |
| SQMP |
| query-balloon |
| ------------- |
| |
| Show balloon information. |
| |
| Make an asynchronous request for balloon info. When the request completes a |
| json-object will be returned containing the following data: |
| |
| - "actual": current balloon value in bytes (json-int) |
| - "mem_swapped_in": Amount of memory swapped in bytes (json-int, optional) |
| - "mem_swapped_out": Amount of memory swapped out in bytes (json-int, optional) |
| - "major_page_faults": Number of major faults (json-int, optional) |
| - "minor_page_faults": Number of minor faults (json-int, optional) |
| - "free_mem": Total amount of free and unused memory in |
| bytes (json-int, optional) |
| - "total_mem": Total amount of available memory in bytes (json-int, optional) |
| |
| Example: |
| |
| -> { "execute": "query-balloon" } |
| <- { |
| "return":{ |
| "actual":1073741824, |
| "mem_swapped_in":0, |
| "mem_swapped_out":0, |
| "major_page_faults":142, |
| "minor_page_faults":239245, |
| "free_mem":1014185984, |
| "total_mem":1044668416 |
| } |
| } |
| |
| EQMP |
| |
| STEXI |
| @item info qtree |
| show device tree |
| @item info qdm |
| show qdev device model list |
| @item info roms |
| show roms |
| @end table |
| ETEXI |
| |
| HXCOMM DO NOT add new commands after 'info', move your addition before it! |
| |
| STEXI |
| @end table |
| ETEXI |
