| include config.mak |
| |
| CFLAGS=-Wall -O2 -g |
| LDFLAGS=-g |
| LIBS= |
| DEFINES=-DHAVE_BYTESWAP_H |
| |
| ifeq ($(ARCH),i386) |
| CFLAGS+=-fomit-frame-pointer |
| OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2 |
| ifeq ($(GCC_MAJOR),3) |
| OP_CFLAGS+= -falign-functions=0 |
| else |
| OP_CFLAGS+= -malign-functions=0 |
| endif |
| # WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object |
| # that the kernel ELF loader considers as an executable. I think this |
| # is the simplest way to make it self virtualizable! |
| LDFLAGS+=-Wl,-shared |
| endif |
| |
| ifeq ($(ARCH),ppc) |
| OP_CFLAGS=$(CFLAGS) |
| LDFLAGS+=-Wl,-T,ppc.ld |
| endif |
| |
| ifeq ($(ARCH),s390) |
| OP_CFLAGS=$(CFLAGS) |
| LDFLAGS+=-Wl,-T,s390.ld |
| endif |
| |
| ifeq ($(GCC_MAJOR),3) |
| # very important to generate a return at the end of every operation |
| OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls |
| endif |
| |
| ######################################################### |
| |
| DEFINES+=-D_GNU_SOURCE |
| LIBS+=-lm |
| |
| # profiling code |
| ifdef TARGET_GPROF |
| LDFLAGS+=-p |
| main.o: CFLAGS+=-p |
| endif |
| |
| OBJS= elfload.o main.o syscall.o signal.o |
| SRCS:= $(OBJS:.o=.c) |
| OBJS+= libqemu.a |
| |
| LIBOBJS+=thunk.o translate-i386.o op-i386.o exec-i386.o |
| # NOTE: the disassembler code is only needed for debugging |
| LIBOBJS+=i386-dis.o dis-buf.o |
| |
| all: qemu qemu-doc.html |
| |
| qemu: $(OBJS) |
| $(CC) $(LDFLAGS) -o $@ $^ $(LIBS) |
| |
| depend: $(SRCS) |
| $(CC) -MM $(CFLAGS) $^ 1>.depend |
| |
| # libqemu |
| |
| libqemu.a: $(LIBOBJS) |
| rm -f $@ |
| $(AR) rcs $@ $(LIBOBJS) |
| |
| dyngen: dyngen.c |
| $(HOST_CC) -O2 -Wall -g $< -o $@ |
| |
| translate-i386.o: translate-i386.c op-i386.h cpu-i386.h |
| |
| op-i386.h: op-i386.o dyngen |
| ./dyngen -o $@ $< |
| |
| op-i386.o: op-i386.c opreg_template.h ops_template.h |
| $(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $< |
| |
| %.o: %.c |
| $(CC) $(CFLAGS) $(DEFINES) -c -o $@ $< |
| |
| clean: |
| $(MAKE) -C tests clean |
| rm -f *.o *.a *~ qemu dyngen TAGS |
| |
| distclean: clean |
| rm -f config.mak config.h |
| |
| install: qemu |
| install -m 755 -s qemu $(prefix)/bin |
| |
| # various test targets |
| test speed: qemu |
| make -C tests $@ |
| |
| TAGS: |
| etags *.[ch] i386/*.[ch] |
| |
| # documentation |
| qemu-doc.html: qemu-doc.texi |
| texi2html -monolithic -number $< |
| |
| FILES= \ |
| README README.distrib COPYING COPYING.LIB TODO Changelog VERSION \ |
| dyngen.c ioctls.h ops_template.h op_string.h syscall_types.h\ |
| Makefile elf.h linux_bin.h segment.h thunk.c\ |
| elfload.c main.c signal.c thunk.h\ |
| cpu-i386.h qemu.h op-i386.c opc-i386.h syscall-i386.h translate-i386.c\ |
| dis-asm.h gen-i386.h syscall.c\ |
| dis-buf.c i386-dis.c opreg_template.h syscall_defs.h\ |
| ppc.ld s390.ld exec-i386.h exec-i386.c configure \ |
| tests/Makefile\ |
| tests/test-i386.c tests/test-i386-shift.h tests/test-i386.h\ |
| tests/test-i386-muldiv.h tests/test-i386-code16.S\ |
| tests/hello.c tests/hello tests/sha1.c \ |
| tests/testsig.c tests/testclone.c tests/testthread.c \ |
| tests/runcom.c tests/pi_10.com \ |
| qemu-doc.texi qemu-doc.html |
| |
| FILE=qemu-$(VERSION) |
| |
| tar: |
| rm -rf /tmp/$(FILE) |
| mkdir -p /tmp/$(FILE) |
| cp -P $(FILES) /tmp/$(FILE) |
| ( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) ) |
| rm -rf /tmp/$(FILE) |
| |
| # generate a binary distribution including the test binary environnment |
| BINPATH=/usr/local/qemu-i386 |
| |
| tarbin: |
| tar zcvf /tmp/qemu-i386-glibc21.tar.gz \ |
| $(BINPATH)/etc $(BINPATH)/lib $(BINPATH)/bin |
| tar zcvf /tmp/qemu-i386-wine.tar.gz \ |
| $(BINPATH)/X11R6 $(BINPATH)/wine |
| |
| ifneq ($(wildcard .depend),) |
| include .depend |
| endif |
