blob: a5a1ce268044f146a8924d51c06cb4a81d4e1b15 [file] [log] [blame]
/*
* STM32L4x5 SYSCFG (System Configuration Controller)
*
* Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
* Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
*
* SPDX-License-Identifier: GPL-2.0-or-later
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
* This work is based on the stm32f4xx_syscfg by Alistair Francis.
* Original code is licensed under the MIT License:
*
* Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
*/
/*
* The reference used is the STMicroElectronics RM0351 Reference manual
* for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
* https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "trace.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "hw/misc/stm32l4x5_syscfg.h"
#include "hw/gpio/stm32l4x5_gpio.h"
#define SYSCFG_MEMRMP 0x00
#define SYSCFG_CFGR1 0x04
#define SYSCFG_EXTICR1 0x08
#define SYSCFG_EXTICR2 0x0C
#define SYSCFG_EXTICR3 0x10
#define SYSCFG_EXTICR4 0x14
#define SYSCFG_SCSR 0x18
#define SYSCFG_CFGR2 0x1C
#define SYSCFG_SWPR 0x20
#define SYSCFG_SKR 0x24
#define SYSCFG_SWPR2 0x28
/* 00000000_00000000_00000001_00000111 */
#define ACTIVABLE_BITS_MEMRP 0x00000107
/* 11111100_11111111_00000001_00000000 */
#define ACTIVABLE_BITS_CFGR1 0xFCFF0100
/* 00000000_00000000_00000000_00000001 */
#define FIREWALL_DISABLE_CFGR1 0x00000001
/* 00000000_00000000_11111111_11111111 */
#define ACTIVABLE_BITS_EXTICR 0x0000FFFF
/* 00000000_00000000_00000000_00000011 */
/* #define ACTIVABLE_BITS_SCSR 0x00000003 */
/* 00000000_00000000_00000000_00001111 */
#define ECC_LOCK_CFGR2 0x0000000F
/* 00000000_00000000_00000001_00000000 */
#define SRAM2_PARITY_ERROR_FLAG_CFGR2 0x00000100
/* 00000000_00000000_00000000_11111111 */
#define ACTIVABLE_BITS_SKR 0x000000FF
#define NUM_LINES_PER_EXTICR_REG 4
static void stm32l4x5_syscfg_hold_reset(Object *obj, ResetType type)
{
Stm32l4x5SyscfgState *s = STM32L4X5_SYSCFG(obj);
s->memrmp = 0x00000000;
s->cfgr1 = 0x7C000001;
s->exticr[0] = 0x00000000;
s->exticr[1] = 0x00000000;
s->exticr[2] = 0x00000000;
s->exticr[3] = 0x00000000;
s->scsr = 0x00000000;
s->cfgr2 = 0x00000000;
s->swpr = 0x00000000;
s->skr = 0x00000000;
s->swpr2 = 0x00000000;
}
static void stm32l4x5_syscfg_set_irq(void *opaque, int irq, int level)
{
Stm32l4x5SyscfgState *s = opaque;
const uint8_t gpio = irq / GPIO_NUM_PINS;
const int line = irq % GPIO_NUM_PINS;
const int exticr_reg = line / NUM_LINES_PER_EXTICR_REG;
const int startbit = (line % NUM_LINES_PER_EXTICR_REG) * 4;
g_assert(gpio < NUM_GPIOS);
trace_stm32l4x5_syscfg_set_irq(gpio, line, level);
if (extract32(s->exticr[exticr_reg], startbit, 4) == gpio) {
trace_stm32l4x5_syscfg_forward_exti(line);
qemu_set_irq(s->gpio_out[line], level);
}
}
static uint64_t stm32l4x5_syscfg_read(void *opaque, hwaddr addr,
unsigned int size)
{
Stm32l4x5SyscfgState *s = opaque;
trace_stm32l4x5_syscfg_read(addr);
switch (addr) {
case SYSCFG_MEMRMP:
return s->memrmp;
case SYSCFG_CFGR1:
return s->cfgr1;
case SYSCFG_EXTICR1...SYSCFG_EXTICR4:
return s->exticr[(addr - SYSCFG_EXTICR1) / 4];
case SYSCFG_SCSR:
return s->scsr;
case SYSCFG_CFGR2:
return s->cfgr2;
case SYSCFG_SWPR:
return s->swpr;
case SYSCFG_SKR:
return s->skr;
case SYSCFG_SWPR2:
return s->swpr2;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
return 0;
}
}
static void stm32l4x5_syscfg_write(void *opaque, hwaddr addr,
uint64_t value, unsigned int size)
{
Stm32l4x5SyscfgState *s = opaque;
trace_stm32l4x5_syscfg_write(addr, value);
switch (addr) {
case SYSCFG_MEMRMP:
qemu_log_mask(LOG_UNIMP,
"%s: Changing the memory mapping isn't supported\n",
__func__);
s->memrmp = value & ACTIVABLE_BITS_MEMRP;
return;
case SYSCFG_CFGR1:
qemu_log_mask(LOG_UNIMP,
"%s: Functions in CFGRx aren't supported\n",
__func__);
/* bit 0 (firewall dis.) is cleared by software, set only by reset. */
s->cfgr1 = (s->cfgr1 & value & FIREWALL_DISABLE_CFGR1) |
(value & ACTIVABLE_BITS_CFGR1);
return;
case SYSCFG_EXTICR1...SYSCFG_EXTICR4:
s->exticr[(addr - SYSCFG_EXTICR1) / 4] =
(value & ACTIVABLE_BITS_EXTICR);
return;
case SYSCFG_SCSR:
qemu_log_mask(LOG_UNIMP,
"%s: Erasing SRAM2 isn't supported\n",
__func__);
/*
* only non reserved bits are :
* bit 0 (write-protected by a passkey), bit 1 (meant to be read)
* so it serves no purpose yet to add :
* s->scsr = value & 0x3;
*/
return;
case SYSCFG_CFGR2:
qemu_log_mask(LOG_UNIMP,
"%s: Functions in CFGRx aren't supported\n",
__func__);
/* bit 8 (SRAM2 PEF) is cleared by software by writing a '1'.*/
/* bits[3:0] (ECC Lock) are set by software, cleared only by reset.*/
s->cfgr2 = (s->cfgr2 | (value & ECC_LOCK_CFGR2)) &
~(value & SRAM2_PARITY_ERROR_FLAG_CFGR2);
return;
case SYSCFG_SWPR:
qemu_log_mask(LOG_UNIMP,
"%s: Write protecting SRAM2 isn't supported\n",
__func__);
/* These bits are set by software and cleared only by reset.*/
s->swpr |= value;
return;
case SYSCFG_SKR:
qemu_log_mask(LOG_UNIMP,
"%s: Erasing SRAM2 isn't supported\n",
__func__);
s->skr = value & ACTIVABLE_BITS_SKR;
return;
case SYSCFG_SWPR2:
qemu_log_mask(LOG_UNIMP,
"%s: Write protecting SRAM2 isn't supported\n",
__func__);
/* These bits are set by software and cleared only by reset.*/
s->swpr2 |= value;
return;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
}
}
static const MemoryRegionOps stm32l4x5_syscfg_ops = {
.read = stm32l4x5_syscfg_read,
.write = stm32l4x5_syscfg_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.impl.min_access_size = 4,
.impl.max_access_size = 4,
.impl.unaligned = false,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
.valid.unaligned = false,
};
static void stm32l4x5_syscfg_init(Object *obj)
{
Stm32l4x5SyscfgState *s = STM32L4X5_SYSCFG(obj);
memory_region_init_io(&s->mmio, obj, &stm32l4x5_syscfg_ops, s,
TYPE_STM32L4X5_SYSCFG, 0x400);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
qdev_init_gpio_in(DEVICE(obj), stm32l4x5_syscfg_set_irq,
GPIO_NUM_PINS * NUM_GPIOS);
qdev_init_gpio_out(DEVICE(obj), s->gpio_out, GPIO_NUM_PINS);
}
static const VMStateDescription vmstate_stm32l4x5_syscfg = {
.name = TYPE_STM32L4X5_SYSCFG,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(memrmp, Stm32l4x5SyscfgState),
VMSTATE_UINT32(cfgr1, Stm32l4x5SyscfgState),
VMSTATE_UINT32_ARRAY(exticr, Stm32l4x5SyscfgState,
SYSCFG_NUM_EXTICR),
VMSTATE_UINT32(scsr, Stm32l4x5SyscfgState),
VMSTATE_UINT32(cfgr2, Stm32l4x5SyscfgState),
VMSTATE_UINT32(swpr, Stm32l4x5SyscfgState),
VMSTATE_UINT32(skr, Stm32l4x5SyscfgState),
VMSTATE_UINT32(swpr2, Stm32l4x5SyscfgState),
VMSTATE_END_OF_LIST()
}
};
static void stm32l4x5_syscfg_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
ResettableClass *rc = RESETTABLE_CLASS(klass);
dc->vmsd = &vmstate_stm32l4x5_syscfg;
rc->phases.hold = stm32l4x5_syscfg_hold_reset;
}
static const TypeInfo stm32l4x5_syscfg_info[] = {
{
.name = TYPE_STM32L4X5_SYSCFG,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(Stm32l4x5SyscfgState),
.instance_init = stm32l4x5_syscfg_init,
.class_init = stm32l4x5_syscfg_class_init,
}
};
DEFINE_TYPES(stm32l4x5_syscfg_info)