blob: c078849403c7751e303a620d15f63da549f75919 [file] [log] [blame]
/*
* QEMU support -- ARM Power Control specific functions.
*
* Copyright (c) 2016 Jean-Christophe Dubois
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*
*/
#include "qemu/osdep.h"
#include "cpu.h"
#include "cpu-qom.h"
#include "internals.h"
#include "arm-powerctl.h"
#include "qemu/log.h"
#include "qemu/main-loop.h"
#include "sysemu/tcg.h"
#ifndef DEBUG_ARM_POWERCTL
#define DEBUG_ARM_POWERCTL 0
#endif
#define DPRINTF(fmt, args...) \
do { \
if (DEBUG_ARM_POWERCTL) { \
fprintf(stderr, "[ARM]%s: " fmt , __func__, ##args); \
} \
} while (0)
CPUState *arm_get_cpu_by_id(uint64_t id)
{
CPUState *cpu;
DPRINTF("cpu %" PRId64 "\n", id);
CPU_FOREACH(cpu) {
ARMCPU *armcpu = ARM_CPU(cpu);
if (armcpu->mp_affinity == id) {
return cpu;
}
}
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: Requesting unknown CPU %" PRId64 "\n",
__func__, id);
return NULL;
}
struct CpuOnInfo {
uint64_t entry;
uint64_t context_id;
uint32_t target_el;
bool target_aa64;
};
static void arm_set_cpu_on_async_work(CPUState *target_cpu_state,
run_on_cpu_data data)
{
ARMCPU *target_cpu = ARM_CPU(target_cpu_state);
struct CpuOnInfo *info = (struct CpuOnInfo *) data.host_ptr;
/* Initialize the cpu we are turning on */
cpu_reset(target_cpu_state);
arm_emulate_firmware_reset(target_cpu_state, info->target_el);
target_cpu_state->halted = 0;
/* We check if the started CPU is now at the correct level */
assert(info->target_el == arm_current_el(&target_cpu->env));
if (info->target_aa64) {
target_cpu->env.xregs[0] = info->context_id;
} else {
target_cpu->env.regs[0] = info->context_id;
}
if (tcg_enabled()) {
/* CP15 update requires rebuilding hflags */
arm_rebuild_hflags(&target_cpu->env);
}
/* Start the new CPU at the requested address */
cpu_set_pc(target_cpu_state, info->entry);
g_free(info);
/* Finally set the power status */
assert(qemu_mutex_iothread_locked());
target_cpu->power_state = PSCI_ON;
}
int arm_set_cpu_on(uint64_t cpuid, uint64_t entry, uint64_t context_id,
uint32_t target_el, bool target_aa64)
{
CPUState *target_cpu_state;
ARMCPU *target_cpu;
struct CpuOnInfo *info;
assert(qemu_mutex_iothread_locked());
DPRINTF("cpu %" PRId64 " (EL %d, %s) @ 0x%" PRIx64 " with R0 = 0x%" PRIx64
"\n", cpuid, target_el, target_aa64 ? "aarch64" : "aarch32", entry,
context_id);
/* requested EL level need to be in the 1 to 3 range */
assert((target_el > 0) && (target_el < 4));
if (target_aa64 && (entry & 3)) {
/*
* if we are booting in AArch64 mode then "entry" needs to be 4 bytes
* aligned.
*/
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
/* Retrieve the cpu we are powering up */
target_cpu_state = arm_get_cpu_by_id(cpuid);
if (!target_cpu_state) {
/* The cpu was not found */
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
target_cpu = ARM_CPU(target_cpu_state);
if (target_cpu->power_state == PSCI_ON) {
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: CPU %" PRId64 " is already on\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_ALREADY_ON;
}
/*
* The newly brought CPU is requested to enter the exception level
* "target_el" and be in the requested mode (AArch64 or AArch32).
*/
if (((target_el == 3) && !arm_feature(&target_cpu->env, ARM_FEATURE_EL3)) ||
((target_el == 2) && !arm_feature(&target_cpu->env, ARM_FEATURE_EL2))) {
/*
* The CPU does not support requested level
*/
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
if (!target_aa64 && arm_feature(&target_cpu->env, ARM_FEATURE_AARCH64)) {
/*
* For now we don't support booting an AArch64 CPU in AArch32 mode
* TODO: We should add this support later
*/
qemu_log_mask(LOG_UNIMP,
"[ARM]%s: Starting AArch64 CPU %" PRId64
" in AArch32 mode is not supported yet\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
/*
* If another CPU has powered the target on we are in the state
* ON_PENDING and additional attempts to power on the CPU should
* fail (see 6.6 Implementation CPU_ON/CPU_OFF races in the PSCI
* spec)
*/
if (target_cpu->power_state == PSCI_ON_PENDING) {
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: CPU %" PRId64 " is already powering on\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_ON_PENDING;
}
/* To avoid racing with a CPU we are just kicking off we do the
* final bit of preparation for the work in the target CPUs
* context.
*/
info = g_new(struct CpuOnInfo, 1);
info->entry = entry;
info->context_id = context_id;
info->target_el = target_el;
info->target_aa64 = target_aa64;
async_run_on_cpu(target_cpu_state, arm_set_cpu_on_async_work,
RUN_ON_CPU_HOST_PTR(info));
/* We are good to go */
return QEMU_ARM_POWERCTL_RET_SUCCESS;
}
static void arm_set_cpu_on_and_reset_async_work(CPUState *target_cpu_state,
run_on_cpu_data data)
{
ARMCPU *target_cpu = ARM_CPU(target_cpu_state);
/* Initialize the cpu we are turning on */
cpu_reset(target_cpu_state);
target_cpu_state->halted = 0;
/* Finally set the power status */
assert(qemu_mutex_iothread_locked());
target_cpu->power_state = PSCI_ON;
}
int arm_set_cpu_on_and_reset(uint64_t cpuid)
{
CPUState *target_cpu_state;
ARMCPU *target_cpu;
assert(qemu_mutex_iothread_locked());
/* Retrieve the cpu we are powering up */
target_cpu_state = arm_get_cpu_by_id(cpuid);
if (!target_cpu_state) {
/* The cpu was not found */
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
target_cpu = ARM_CPU(target_cpu_state);
if (target_cpu->power_state == PSCI_ON) {
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: CPU %" PRId64 " is already on\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_ALREADY_ON;
}
/*
* If another CPU has powered the target on we are in the state
* ON_PENDING and additional attempts to power on the CPU should
* fail (see 6.6 Implementation CPU_ON/CPU_OFF races in the PSCI
* spec)
*/
if (target_cpu->power_state == PSCI_ON_PENDING) {
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: CPU %" PRId64 " is already powering on\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_ON_PENDING;
}
async_run_on_cpu(target_cpu_state, arm_set_cpu_on_and_reset_async_work,
RUN_ON_CPU_NULL);
/* We are good to go */
return QEMU_ARM_POWERCTL_RET_SUCCESS;
}
static void arm_set_cpu_off_async_work(CPUState *target_cpu_state,
run_on_cpu_data data)
{
ARMCPU *target_cpu = ARM_CPU(target_cpu_state);
assert(qemu_mutex_iothread_locked());
target_cpu->power_state = PSCI_OFF;
target_cpu_state->halted = 1;
target_cpu_state->exception_index = EXCP_HLT;
}
int arm_set_cpu_off(uint64_t cpuid)
{
CPUState *target_cpu_state;
ARMCPU *target_cpu;
assert(qemu_mutex_iothread_locked());
DPRINTF("cpu %" PRId64 "\n", cpuid);
/* change to the cpu we are powering up */
target_cpu_state = arm_get_cpu_by_id(cpuid);
if (!target_cpu_state) {
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
target_cpu = ARM_CPU(target_cpu_state);
if (target_cpu->power_state == PSCI_OFF) {
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: CPU %" PRId64 " is already off\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_IS_OFF;
}
/* Queue work to run under the target vCPUs context */
async_run_on_cpu(target_cpu_state, arm_set_cpu_off_async_work,
RUN_ON_CPU_NULL);
return QEMU_ARM_POWERCTL_RET_SUCCESS;
}
static void arm_reset_cpu_async_work(CPUState *target_cpu_state,
run_on_cpu_data data)
{
/* Reset the cpu */
cpu_reset(target_cpu_state);
}
int arm_reset_cpu(uint64_t cpuid)
{
CPUState *target_cpu_state;
ARMCPU *target_cpu;
assert(qemu_mutex_iothread_locked());
DPRINTF("cpu %" PRId64 "\n", cpuid);
/* change to the cpu we are resetting */
target_cpu_state = arm_get_cpu_by_id(cpuid);
if (!target_cpu_state) {
return QEMU_ARM_POWERCTL_INVALID_PARAM;
}
target_cpu = ARM_CPU(target_cpu_state);
if (target_cpu->power_state == PSCI_OFF) {
qemu_log_mask(LOG_GUEST_ERROR,
"[ARM]%s: CPU %" PRId64 " is off\n",
__func__, cpuid);
return QEMU_ARM_POWERCTL_IS_OFF;
}
/* Queue work to run under the target vCPUs context */
async_run_on_cpu(target_cpu_state, arm_reset_cpu_async_work,
RUN_ON_CPU_NULL);
return QEMU_ARM_POWERCTL_RET_SUCCESS;
}