blob: 7ef36f42d0f5caff08a049655846737e106fb854 [file] [log] [blame]
==================================
The QEMU build system architecture
==================================
This document aims to help developers understand the architecture of the
QEMU build system. As with projects using GNU autotools, the QEMU build
system has two stages, first the developer runs the "configure" script
to determine the local build environment characteristics, then they run
"make" to build the project. There is about where the similarities with
GNU autotools end, so try to forget what you know about them.
Stage 1: configure
==================
The QEMU configure script is written directly in shell, and should be
compatible with any POSIX shell, hence it uses #!/bin/sh. An important
implication of this is that it is important to avoid using bash-isms on
development platforms where bash is the primary host.
In contrast to autoconf scripts, QEMU's configure is expected to be
silent while it is checking for features. It will only display output
when an error occurs, or to show the final feature enablement summary
on completion.
Because QEMU uses the Meson build system under the hood, only VPATH
builds are supported. There are two general ways to invoke configure &
perform a build:
- VPATH, build artifacts outside of QEMU source tree entirely::
cd ../
mkdir build
cd build
../qemu/configure
make
- VPATH, build artifacts in a subdir of QEMU source tree::
mkdir build
cd build
../configure
make
For now, checks on the compilation environment are found in configure
rather than meson.build, though this is expected to change. The command
line is parsed in the configure script and, whenever needed, converted
into the appropriate options to Meson.
New checks should be added to Meson, which usually comprises the
following tasks:
- Add a Meson build option to meson_options.txt.
- Add support to the command line arg parser to handle any new
`--enable-XXX`/`--disable-XXX` flags required by the feature.
- Add information to the help output message to report on the new
feature flag.
- Add code to perform the actual feature check.
- Add code to include the feature status in `config-host.h`
- Add code to print out the feature status in the configure summary
upon completion.
Taking the probe for SDL2_Image as an example, we have the following pieces
in configure::
# Initial variable state
sdl_image=auto
..snip..
# Configure flag processing
--disable-sdl-image) sdl_image=disabled
;;
--enable-sdl-image) sdl_image=enabled
;;
..snip..
# Help output feature message
sdl-image SDL Image support for icons
..snip..
# Meson invocation
-Dsdl_image=$sdl_image
In meson_options.txt::
option('sdl', type : 'feature', value : 'auto',
description: 'SDL Image support for icons')
In meson.build::
# Detect dependency
sdl_image = dependency('SDL2_image', required: get_option('sdl_image'),
method: 'pkg-config',
kwargs: static_kwargs)
# Create config-host.h (if applicable)
config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
# Summary
summary_info += {'SDL image support': sdl_image.found()}
Helper functions
----------------
The configure script provides a variety of helper functions to assist
developers in checking for system features:
`do_cc $ARGS...`
Attempt to run the system C compiler passing it $ARGS...
`do_cxx $ARGS...`
Attempt to run the system C++ compiler passing it $ARGS...
`compile_object $CFLAGS`
Attempt to compile a test program with the system C compiler using
$CFLAGS. The test program must have been previously written to a file
called $TMPC. The replacement in Meson is the compiler object `cc`,
which has methods such as `cc.compiles()`,
`cc.check_header()`, `cc.has_function()`.
`compile_prog $CFLAGS $LDFLAGS`
Attempt to compile a test program with the system C compiler using
$CFLAGS and link it with the system linker using $LDFLAGS. The test
program must have been previously written to a file called $TMPC.
The replacement in Meson is `cc.find_library()` and `cc.links()`.
`has $COMMAND`
Determine if $COMMAND exists in the current environment, either as a
shell builtin, or executable binary, returning 0 on success. The
replacement in Meson is `find_program()`.
`check_define $NAME`
Determine if the macro $NAME is defined by the system C compiler
`check_include $NAME`
Determine if the include $NAME file is available to the system C
compiler. The replacement in Meson is `cc.has_header()`.
`write_c_skeleton`
Write a minimal C program main() function to the temporary file
indicated by $TMPC
`feature_not_found $NAME $REMEDY`
Print a message to stderr that the feature $NAME was not available
on the system, suggesting the user try $REMEDY to address the
problem.
`error_exit $MESSAGE $MORE...`
Print $MESSAGE to stderr, followed by $MORE... and then exit from the
configure script with non-zero status
`query_pkg_config $ARGS...`
Run pkg-config passing it $ARGS. If QEMU is doing a static build,
then --static will be automatically added to $ARGS
Stage 2: Meson
==============
The Meson build system is currently used to describe the build
process for:
1) executables, which include:
- Tools - qemu-img, qemu-nbd, qga (guest agent), etc
- System emulators - qemu-system-$ARCH
- Userspace emulators - qemu-$ARCH
- Unit tests
2) documentation
3) ROMs, which can be either installed as binary blobs or compiled
4) other data files, such as icons or desktop files
All executables are built by default, except for some `contrib/`
binaries that are known to fail to build on some platforms (for example
32-bit or big-endian platforms). Tests are also built by default,
though that might change in the future.
The source code is highly modularized, split across many files to
facilitate building of all of these components with as little duplicated
compilation as possible. Using the Meson "sourceset" functionality,
`meson.build` files group the source files in rules that are
enabled according to the available system libraries and to various
configuration symbols. Sourcesets belong to one of four groups:
Subsystem sourcesets:
Various subsystems that are common to both tools and emulators have
their own sourceset, for example `block_ss` for the block device subsystem,
`chardev_ss` for the character device subsystem, etc. These sourcesets
are then turned into static libraries as follows::
libchardev = static_library('chardev', chardev_ss.sources(),
name_suffix: 'fa',
build_by_default: false)
chardev = declare_dependency(link_whole: libchardev)
As of Meson 0.55.1, the special `.fa` suffix should be used for everything
that is used with `link_whole`, to ensure that the link flags are placed
correctly in the command line.
Target-independent emulator sourcesets:
Various general purpose helper code is compiled only once and
the .o files are linked into all output binaries that need it.
This includes error handling infrastructure, standard data structures,
platform portability wrapper functions, etc.
Target-independent code lives in the `common_ss`, `softmmu_ss` and
`user_ss` sourcesets. `common_ss` is linked into all emulators,
`softmmu_ss` only in system emulators, `user_ss` only in user-mode
emulators.
Target-independent sourcesets must exercise particular care when using
`if_false` rules. The `if_false` rule will be used correctly when linking
emulator binaries; however, when *compiling* target-independent files
into .o files, Meson may need to pick *both* the `if_true` and
`if_false` sides to cater for targets that want either side. To
achieve that, you can add a special rule using the ``CONFIG_ALL``
symbol::
# Some targets have CONFIG_ACPI, some don't, so this is not enough
softmmu_ss.add(when: 'CONFIG_ACPI`, if_true: files('acpi.c'),
if_false: files('acpi-stub.c'))
# This is required as well:
softmmu_ss.add(when: 'CONFIG_ALL`, if_true: files('acpi-stub.c'))
Target-dependent emulator sourcesets:
In the target-dependent set lives CPU emulation, some device emulation and
much glue code. This sometimes also has to be compiled multiple times,
once for each target being built. Target-dependent files are included
in the `specific_ss` sourceset.
Each emulator also includes sources for files in the `hw/` and `target/`
subdirectories. The subdirectory used for each emulator comes
from the target's definition of ``TARGET_BASE_ARCH`` or (if missing)
``TARGET_ARCH``, as found in `default-configs/targets/*.mak`.
Each subdirectory in `hw/` adds one sourceset to the `hw_arch` dictionary,
for example::
arm_ss = ss.source_set()
arm_ss.add(files('boot.c'), fdt)
...
hw_arch += {'arm': arm_ss}
The sourceset is only used for system emulators.
Each subdirectory in `target/` instead should add one sourceset to each
of the `target_arch` and `target_softmmu_arch`, which are used respectively
for all emulators and for system emulators only. For example::
arm_ss = ss.source_set()
arm_softmmu_ss = ss.source_set()
...
target_arch += {'arm': arm_ss}
target_softmmu_arch += {'arm': arm_softmmu_ss}
Utility sourcesets:
All binaries link with a static library `libqemuutil.a`. This library
is built from several sourcesets; most of them however host generated
code, and the only two of general interest are `util_ss` and `stub_ss`.
The separation between these two is purely for documentation purposes.
`util_ss` contains generic utility files. Even though this code is only
linked in some binaries, sometimes it requires hooks only in some of
these and depend on other functions that are not fully implemented by
all QEMU binaries. `stub_ss` links dummy stubs that will only be linked
into the binary if the real implementation is not present. In a way,
the stubs can be thought of as a portable implementation of the weak
symbols concept.
The following files concur in the definition of which files are linked
into each emulator:
`default-configs/devices/*.mak`
The files under `default-configs/devices/` control the boards and devices
that are built into each QEMU system emulation targets. They merely contain
a list of config variable definitions such as::
include arm-softmmu.mak
CONFIG_XLNX_ZYNQMP_ARM=y
CONFIG_XLNX_VERSAL=y
`*/Kconfig`
These files are processed together with `default-configs/devices/*.mak` and
describe the dependencies between various features, subsystems and
device models. They are described in :ref:`kconfig`
`default-configs/targets/*.mak`
These files mostly define symbols that appear in the `*-config-target.h`
file for each emulator [#cfgtarget]_. However, the ``TARGET_ARCH``
and ``TARGET_BASE_ARCH`` will also be used to select the `hw/` and
`target/` subdirectories that are compiled into each target.
.. [#cfgtarget] This header is included by `qemu/osdep.h` when
compiling files from the target-specific sourcesets.
These files rarely need changing unless you are adding a completely
new target, or enabling new devices or hardware for a particular
system/userspace emulation target
Support scripts
---------------
Meson has a special convention for invoking Python scripts: if their
first line is `#! /usr/bin/env python3` and the file is *not* executable,
find_program() arranges to invoke the script under the same Python
interpreter that was used to invoke Meson. This is the most common
and preferred way to invoke support scripts from Meson build files,
because it automatically uses the value of configure's --python= option.
In case the script is not written in Python, use a `#! /usr/bin/env ...`
line and make the script executable.
Scripts written in Python, where it is desirable to make the script
executable (for example for test scripts that developers may want to
invoke from the command line, such as tests/qapi-schema/test-qapi.py),
should be invoked through the `python` variable in meson.build. For
example::
test('QAPI schema regression tests', python,
args: files('test-qapi.py'),
env: test_env, suite: ['qapi-schema', 'qapi-frontend'])
This is needed to obey the --python= option passed to the configure
script, which may point to something other than the first python3
binary on the path.
Stage 3: makefiles
==================
The use of GNU make is required with the QEMU build system.
The output of Meson is a build.ninja file, which is used with the Ninja
build system. QEMU uses a different approach, where Makefile rules are
synthesized from the build.ninja file. The main Makefile includes these
rules and wraps them so that e.g. submodules are built before QEMU.
The resulting build system is largely non-recursive in nature, in
contrast to common practices seen with automake.
Tests are also ran by the Makefile with the traditional `make check`
phony target, while benchmarks are run with `make bench`. Meson test
suites such as `unit` can be ran with `make check-unit` too. It is also
possible to run tests defined in meson.build with `meson test`.
Important files for the build system
====================================
Statically defined files
------------------------
The following key files are statically defined in the source tree, with
the rules needed to build QEMU. Their behaviour is influenced by a
number of dynamically created files listed later.
`Makefile`
The main entry point used when invoking make to build all the components
of QEMU. The default 'all' target will naturally result in the build of
every component. Makefile takes care of recursively building submodules
directly via a non-recursive set of rules.
`*/meson.build`
The meson.build file in the root directory is the main entry point for the
Meson build system, and it coordinates the configuration and build of all
executables. Build rules for various subdirectories are included in
other meson.build files spread throughout the QEMU source tree.
`tests/Makefile.include`
Rules for external test harnesses. These include the TCG tests,
`qemu-iotests` and the Avocado-based acceptance tests.
`tests/docker/Makefile.include`
Rules for Docker tests. Like tests/Makefile, this file is included
directly by the top level Makefile, anything defined in this file will
influence the entire build system.
`tests/vm/Makefile.include`
Rules for VM-based tests. Like tests/Makefile, this file is included
directly by the top level Makefile, anything defined in this file will
influence the entire build system.
Dynamically created files
-------------------------
The following files are generated dynamically by configure in order to
control the behaviour of the statically defined makefiles. This avoids
the need for QEMU makefiles to go through any pre-processing as seen
with autotools, where Makefile.am generates Makefile.in which generates
Makefile.
Built by configure:
`config-host.mak`
When configure has determined the characteristics of the build host it
will write a long list of variables to config-host.mak file. This
provides the various install directories, compiler / linker flags and a
variety of `CONFIG_*` variables related to optionally enabled features.
This is imported by the top level Makefile and meson.build in order to
tailor the build output.
config-host.mak is also used as a dependency checking mechanism. If make
sees that the modification timestamp on configure is newer than that on
config-host.mak, then configure will be re-run.
The variables defined here are those which are applicable to all QEMU
build outputs. Variables which are potentially different for each
emulator target are defined by the next file...
Built by Meson:
`${TARGET-NAME}-config-devices.mak`
TARGET-NAME is again the name of a system or userspace emulator. The
config-devices.mak file is automatically generated by make using the
scripts/make_device_config.sh program, feeding it the
default-configs/$TARGET-NAME file as input.
`config-host.h`, `$TARGET-NAME/config-target.h`, `$TARGET-NAME/config-devices.h`
These files are used by source code to determine what features
are enabled. They are generated from the contents of the corresponding
`*.h` files using the scripts/create_config program. This extracts
relevant variables and formats them as C preprocessor macros.
`build.ninja`
The build rules.
Built by Makefile:
`Makefile.ninja`
A Makefile include that bridges to ninja for the actual build. The
Makefile is mostly a list of targets that Meson included in build.ninja.
`Makefile.mtest`
The Makefile definitions that let "make check" run tests defined in
meson.build. The rules are produced from Meson's JSON description of
tests (obtained with "meson introspect --tests") through the script
scripts/mtest2make.py.
Useful make targets
-------------------
`help`
Print a help message for the most common build targets.
`print-VAR`
Print the value of the variable VAR. Useful for debugging the build
system.