| /* |
| * QEMU RISC-V VirtIO Board |
| * |
| * Copyright (c) 2017 SiFive, Inc. |
| * |
| * RISC-V machine with 16550a UART and VirtIO MMIO |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qemu/log.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "hw/boards.h" |
| #include "hw/loader.h" |
| #include "hw/sysbus.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/char/serial.h" |
| #include "target/riscv/cpu.h" |
| #include "hw/riscv/riscv_hart.h" |
| #include "hw/riscv/sifive_plic.h" |
| #include "hw/riscv/sifive_clint.h" |
| #include "hw/riscv/sifive_test.h" |
| #include "hw/riscv/virt.h" |
| #include "hw/riscv/boot.h" |
| #include "chardev/char.h" |
| #include "sysemu/arch_init.h" |
| #include "sysemu/device_tree.h" |
| #include "sysemu/sysemu.h" |
| #include "exec/address-spaces.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci-host/gpex.h" |
| |
| #include <libfdt.h> |
| |
| #if defined(TARGET_RISCV32) |
| # define BIOS_FILENAME "opensbi-riscv32-virt-fw_jump.bin" |
| #else |
| # define BIOS_FILENAME "opensbi-riscv64-virt-fw_jump.bin" |
| #endif |
| |
| static const struct MemmapEntry { |
| hwaddr base; |
| hwaddr size; |
| } virt_memmap[] = { |
| [VIRT_DEBUG] = { 0x0, 0x100 }, |
| [VIRT_MROM] = { 0x1000, 0x11000 }, |
| [VIRT_TEST] = { 0x100000, 0x1000 }, |
| [VIRT_RTC] = { 0x101000, 0x1000 }, |
| [VIRT_CLINT] = { 0x2000000, 0x10000 }, |
| [VIRT_PLIC] = { 0xc000000, 0x4000000 }, |
| [VIRT_UART0] = { 0x10000000, 0x100 }, |
| [VIRT_VIRTIO] = { 0x10001000, 0x1000 }, |
| [VIRT_FLASH] = { 0x20000000, 0x4000000 }, |
| [VIRT_DRAM] = { 0x80000000, 0x0 }, |
| [VIRT_PCIE_MMIO] = { 0x40000000, 0x40000000 }, |
| [VIRT_PCIE_PIO] = { 0x03000000, 0x00010000 }, |
| [VIRT_PCIE_ECAM] = { 0x30000000, 0x10000000 }, |
| }; |
| |
| #define VIRT_FLASH_SECTOR_SIZE (256 * KiB) |
| |
| static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s, |
| const char *name, |
| const char *alias_prop_name) |
| { |
| /* |
| * Create a single flash device. We use the same parameters as |
| * the flash devices on the ARM virt board. |
| */ |
| DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01); |
| |
| qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE); |
| qdev_prop_set_uint8(dev, "width", 4); |
| qdev_prop_set_uint8(dev, "device-width", 2); |
| qdev_prop_set_bit(dev, "big-endian", false); |
| qdev_prop_set_uint16(dev, "id0", 0x89); |
| qdev_prop_set_uint16(dev, "id1", 0x18); |
| qdev_prop_set_uint16(dev, "id2", 0x00); |
| qdev_prop_set_uint16(dev, "id3", 0x00); |
| qdev_prop_set_string(dev, "name", name); |
| |
| object_property_add_child(OBJECT(s), name, OBJECT(dev), |
| &error_abort); |
| object_property_add_alias(OBJECT(s), alias_prop_name, |
| OBJECT(dev), "drive", &error_abort); |
| |
| return PFLASH_CFI01(dev); |
| } |
| |
| static void virt_flash_create(RISCVVirtState *s) |
| { |
| s->flash[0] = virt_flash_create1(s, "virt.flash0", "pflash0"); |
| s->flash[1] = virt_flash_create1(s, "virt.flash1", "pflash1"); |
| } |
| |
| static void virt_flash_map1(PFlashCFI01 *flash, |
| hwaddr base, hwaddr size, |
| MemoryRegion *sysmem) |
| { |
| DeviceState *dev = DEVICE(flash); |
| |
| assert(size % VIRT_FLASH_SECTOR_SIZE == 0); |
| assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX); |
| qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE); |
| qdev_init_nofail(dev); |
| |
| memory_region_add_subregion(sysmem, base, |
| sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), |
| 0)); |
| } |
| |
| static void virt_flash_map(RISCVVirtState *s, |
| MemoryRegion *sysmem) |
| { |
| hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; |
| hwaddr flashbase = virt_memmap[VIRT_FLASH].base; |
| |
| virt_flash_map1(s->flash[0], flashbase, flashsize, |
| sysmem); |
| virt_flash_map1(s->flash[1], flashbase + flashsize, flashsize, |
| sysmem); |
| } |
| |
| static void create_pcie_irq_map(void *fdt, char *nodename, |
| uint32_t plic_phandle) |
| { |
| int pin, dev; |
| uint32_t |
| full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS * FDT_INT_MAP_WIDTH] = {}; |
| uint32_t *irq_map = full_irq_map; |
| |
| /* This code creates a standard swizzle of interrupts such that |
| * each device's first interrupt is based on it's PCI_SLOT number. |
| * (See pci_swizzle_map_irq_fn()) |
| * |
| * We only need one entry per interrupt in the table (not one per |
| * possible slot) seeing the interrupt-map-mask will allow the table |
| * to wrap to any number of devices. |
| */ |
| for (dev = 0; dev < GPEX_NUM_IRQS; dev++) { |
| int devfn = dev * 0x8; |
| |
| for (pin = 0; pin < GPEX_NUM_IRQS; pin++) { |
| int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS); |
| int i = 0; |
| |
| irq_map[i] = cpu_to_be32(devfn << 8); |
| |
| i += FDT_PCI_ADDR_CELLS; |
| irq_map[i] = cpu_to_be32(pin + 1); |
| |
| i += FDT_PCI_INT_CELLS; |
| irq_map[i++] = cpu_to_be32(plic_phandle); |
| |
| i += FDT_PLIC_ADDR_CELLS; |
| irq_map[i] = cpu_to_be32(irq_nr); |
| |
| irq_map += FDT_INT_MAP_WIDTH; |
| } |
| } |
| |
| qemu_fdt_setprop(fdt, nodename, "interrupt-map", |
| full_irq_map, sizeof(full_irq_map)); |
| |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask", |
| 0x1800, 0, 0, 0x7); |
| } |
| |
| static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, |
| uint64_t mem_size, const char *cmdline) |
| { |
| void *fdt; |
| int cpu, i; |
| uint32_t *cells; |
| char *nodename; |
| uint32_t plic_phandle, test_phandle, phandle = 1; |
| hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; |
| hwaddr flashbase = virt_memmap[VIRT_FLASH].base; |
| |
| fdt = s->fdt = create_device_tree(&s->fdt_size); |
| if (!fdt) { |
| error_report("create_device_tree() failed"); |
| exit(1); |
| } |
| |
| qemu_fdt_setprop_string(fdt, "/", "model", "riscv-virtio,qemu"); |
| qemu_fdt_setprop_string(fdt, "/", "compatible", "riscv-virtio"); |
| qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); |
| |
| qemu_fdt_add_subnode(fdt, "/soc"); |
| qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); |
| qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); |
| qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); |
| |
| nodename = g_strdup_printf("/memory@%lx", |
| (long)memmap[VIRT_DRAM].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| memmap[VIRT_DRAM].base >> 32, memmap[VIRT_DRAM].base, |
| mem_size >> 32, mem_size); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); |
| g_free(nodename); |
| |
| qemu_fdt_add_subnode(fdt, "/cpus"); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", |
| SIFIVE_CLINT_TIMEBASE_FREQ); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); |
| |
| for (cpu = s->soc.num_harts - 1; cpu >= 0; cpu--) { |
| int cpu_phandle = phandle++; |
| int intc_phandle; |
| nodename = g_strdup_printf("/cpus/cpu@%d", cpu); |
| char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); |
| char *isa = riscv_isa_string(&s->soc.harts[cpu]); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); |
| qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); |
| qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); |
| qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", cpu_phandle); |
| intc_phandle = phandle++; |
| qemu_fdt_add_subnode(fdt, intc); |
| qemu_fdt_setprop_cell(fdt, intc, "phandle", intc_phandle); |
| qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); |
| qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); |
| g_free(isa); |
| g_free(intc); |
| g_free(nodename); |
| } |
| |
| /* Add cpu-topology node */ |
| qemu_fdt_add_subnode(fdt, "/cpus/cpu-map"); |
| qemu_fdt_add_subnode(fdt, "/cpus/cpu-map/cluster0"); |
| for (cpu = s->soc.num_harts - 1; cpu >= 0; cpu--) { |
| char *core_nodename = g_strdup_printf("/cpus/cpu-map/cluster0/core%d", |
| cpu); |
| char *cpu_nodename = g_strdup_printf("/cpus/cpu@%d", cpu); |
| uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, cpu_nodename); |
| qemu_fdt_add_subnode(fdt, core_nodename); |
| qemu_fdt_setprop_cell(fdt, core_nodename, "cpu", intc_phandle); |
| g_free(core_nodename); |
| g_free(cpu_nodename); |
| } |
| |
| cells = g_new0(uint32_t, s->soc.num_harts * 4); |
| for (cpu = 0; cpu < s->soc.num_harts; cpu++) { |
| nodename = |
| g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); |
| uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); |
| cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); |
| g_free(nodename); |
| } |
| nodename = g_strdup_printf("/soc/clint@%lx", |
| (long)memmap[VIRT_CLINT].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[VIRT_CLINT].base, |
| 0x0, memmap[VIRT_CLINT].size); |
| qemu_fdt_setprop(fdt, nodename, "interrupts-extended", |
| cells, s->soc.num_harts * sizeof(uint32_t) * 4); |
| g_free(cells); |
| g_free(nodename); |
| |
| plic_phandle = phandle++; |
| cells = g_new0(uint32_t, s->soc.num_harts * 4); |
| for (cpu = 0; cpu < s->soc.num_harts; cpu++) { |
| nodename = |
| g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); |
| uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT); |
| cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); |
| cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT); |
| g_free(nodename); |
| } |
| nodename = g_strdup_printf("/soc/interrupt-controller@%lx", |
| (long)memmap[VIRT_PLIC].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", |
| FDT_PLIC_ADDR_CELLS); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", |
| FDT_PLIC_INT_CELLS); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); |
| qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop(fdt, nodename, "interrupts-extended", |
| cells, s->soc.num_harts * sizeof(uint32_t) * 4); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[VIRT_PLIC].base, |
| 0x0, memmap[VIRT_PLIC].size); |
| qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle); |
| plic_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| g_free(cells); |
| g_free(nodename); |
| |
| for (i = 0; i < VIRTIO_COUNT; i++) { |
| nodename = g_strdup_printf("/virtio_mmio@%lx", |
| (long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size)); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "virtio,mmio"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, |
| 0x0, memmap[VIRT_VIRTIO].size); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", VIRTIO_IRQ + i); |
| g_free(nodename); |
| } |
| |
| nodename = g_strdup_printf("/soc/pci@%lx", |
| (long) memmap[VIRT_PCIE_ECAM].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", |
| FDT_PCI_ADDR_CELLS); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", |
| FDT_PCI_INT_CELLS); |
| qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0x2); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "pci-host-ecam-generic"); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "pci"); |
| qemu_fdt_setprop_cell(fdt, nodename, "linux,pci-domain", 0); |
| qemu_fdt_setprop_cells(fdt, nodename, "bus-range", 0, |
| memmap[VIRT_PCIE_ECAM].size / |
| PCIE_MMCFG_SIZE_MIN - 1); |
| qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", 0, memmap[VIRT_PCIE_ECAM].base, |
| 0, memmap[VIRT_PCIE_ECAM].size); |
| qemu_fdt_setprop_sized_cells(fdt, nodename, "ranges", |
| 1, FDT_PCI_RANGE_IOPORT, 2, 0, |
| 2, memmap[VIRT_PCIE_PIO].base, 2, memmap[VIRT_PCIE_PIO].size, |
| 1, FDT_PCI_RANGE_MMIO, |
| 2, memmap[VIRT_PCIE_MMIO].base, |
| 2, memmap[VIRT_PCIE_MMIO].base, 2, memmap[VIRT_PCIE_MMIO].size); |
| create_pcie_irq_map(fdt, nodename, plic_phandle); |
| g_free(nodename); |
| |
| test_phandle = phandle++; |
| nodename = g_strdup_printf("/test@%lx", |
| (long)memmap[VIRT_TEST].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| { |
| const char compat[] = "sifive,test1\0sifive,test0\0syscon"; |
| qemu_fdt_setprop(fdt, nodename, "compatible", compat, sizeof(compat)); |
| } |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[VIRT_TEST].base, |
| 0x0, memmap[VIRT_TEST].size); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", test_phandle); |
| test_phandle = qemu_fdt_get_phandle(fdt, nodename); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/reboot"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon-reboot"); |
| qemu_fdt_setprop_cell(fdt, nodename, "regmap", test_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "offset", 0x0); |
| qemu_fdt_setprop_cell(fdt, nodename, "value", FINISHER_RESET); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/poweroff"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon-poweroff"); |
| qemu_fdt_setprop_cell(fdt, nodename, "regmap", test_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "offset", 0x0); |
| qemu_fdt_setprop_cell(fdt, nodename, "value", FINISHER_PASS); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/uart@%lx", |
| (long)memmap[VIRT_UART0].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "ns16550a"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[VIRT_UART0].base, |
| 0x0, memmap[VIRT_UART0].size); |
| qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", UART0_IRQ); |
| |
| qemu_fdt_add_subnode(fdt, "/chosen"); |
| qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); |
| if (cmdline) { |
| qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); |
| } |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/rtc@%lx", |
| (long)memmap[VIRT_RTC].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "google,goldfish-rtc"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| 0x0, memmap[VIRT_RTC].base, |
| 0x0, memmap[VIRT_RTC].size); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", RTC_IRQ); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/flash@%" PRIx64, flashbase); |
| qemu_fdt_add_subnode(s->fdt, nodename); |
| qemu_fdt_setprop_string(s->fdt, nodename, "compatible", "cfi-flash"); |
| qemu_fdt_setprop_sized_cells(s->fdt, nodename, "reg", |
| 2, flashbase, 2, flashsize, |
| 2, flashbase + flashsize, 2, flashsize); |
| qemu_fdt_setprop_cell(s->fdt, nodename, "bank-width", 4); |
| g_free(nodename); |
| } |
| |
| |
| static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem, |
| hwaddr ecam_base, hwaddr ecam_size, |
| hwaddr mmio_base, hwaddr mmio_size, |
| hwaddr pio_base, |
| DeviceState *plic, bool link_up) |
| { |
| DeviceState *dev; |
| MemoryRegion *ecam_alias, *ecam_reg; |
| MemoryRegion *mmio_alias, *mmio_reg; |
| qemu_irq irq; |
| int i; |
| |
| dev = qdev_create(NULL, TYPE_GPEX_HOST); |
| |
| qdev_init_nofail(dev); |
| |
| ecam_alias = g_new0(MemoryRegion, 1); |
| ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); |
| memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", |
| ecam_reg, 0, ecam_size); |
| memory_region_add_subregion(get_system_memory(), ecam_base, ecam_alias); |
| |
| mmio_alias = g_new0(MemoryRegion, 1); |
| mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); |
| memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio", |
| mmio_reg, mmio_base, mmio_size); |
| memory_region_add_subregion(get_system_memory(), mmio_base, mmio_alias); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, pio_base); |
| |
| for (i = 0; i < GPEX_NUM_IRQS; i++) { |
| irq = qdev_get_gpio_in(plic, PCIE_IRQ + i); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq); |
| gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ + i); |
| } |
| |
| return dev; |
| } |
| |
| static void riscv_virt_board_init(MachineState *machine) |
| { |
| const struct MemmapEntry *memmap = virt_memmap; |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(machine); |
| MemoryRegion *system_memory = get_system_memory(); |
| MemoryRegion *main_mem = g_new(MemoryRegion, 1); |
| MemoryRegion *mask_rom = g_new(MemoryRegion, 1); |
| char *plic_hart_config; |
| size_t plic_hart_config_len; |
| target_ulong start_addr = memmap[VIRT_DRAM].base; |
| int i; |
| unsigned int smp_cpus = machine->smp.cpus; |
| |
| /* Initialize SOC */ |
| object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc), |
| TYPE_RISCV_HART_ARRAY, &error_abort, NULL); |
| object_property_set_str(OBJECT(&s->soc), machine->cpu_type, "cpu-type", |
| &error_abort); |
| object_property_set_int(OBJECT(&s->soc), smp_cpus, "num-harts", |
| &error_abort); |
| object_property_set_bool(OBJECT(&s->soc), true, "realized", |
| &error_abort); |
| |
| /* register system main memory (actual RAM) */ |
| memory_region_init_ram(main_mem, NULL, "riscv_virt_board.ram", |
| machine->ram_size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, |
| main_mem); |
| |
| /* create device tree */ |
| create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); |
| |
| /* boot rom */ |
| memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom", |
| memmap[VIRT_MROM].size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base, |
| mask_rom); |
| |
| riscv_find_and_load_firmware(machine, BIOS_FILENAME, |
| memmap[VIRT_DRAM].base); |
| |
| if (machine->kernel_filename) { |
| uint64_t kernel_entry = riscv_load_kernel(machine->kernel_filename, |
| NULL); |
| |
| if (machine->initrd_filename) { |
| hwaddr start; |
| hwaddr end = riscv_load_initrd(machine->initrd_filename, |
| machine->ram_size, kernel_entry, |
| &start); |
| qemu_fdt_setprop_cell(s->fdt, "/chosen", |
| "linux,initrd-start", start); |
| qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end", |
| end); |
| } |
| } |
| |
| if (drive_get(IF_PFLASH, 0, 0)) { |
| /* |
| * Pflash was supplied, let's overwrite the address we jump to after |
| * reset to the base of the flash. |
| */ |
| start_addr = virt_memmap[VIRT_FLASH].base; |
| } |
| |
| /* reset vector */ |
| uint32_t reset_vec[8] = { |
| 0x00000297, /* 1: auipc t0, %pcrel_hi(dtb) */ |
| 0x02028593, /* addi a1, t0, %pcrel_lo(1b) */ |
| 0xf1402573, /* csrr a0, mhartid */ |
| #if defined(TARGET_RISCV32) |
| 0x0182a283, /* lw t0, 24(t0) */ |
| #elif defined(TARGET_RISCV64) |
| 0x0182b283, /* ld t0, 24(t0) */ |
| #endif |
| 0x00028067, /* jr t0 */ |
| 0x00000000, |
| start_addr, /* start: .dword */ |
| 0x00000000, |
| /* dtb: */ |
| }; |
| |
| /* copy in the reset vector in little_endian byte order */ |
| for (i = 0; i < sizeof(reset_vec) >> 2; i++) { |
| reset_vec[i] = cpu_to_le32(reset_vec[i]); |
| } |
| rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), |
| memmap[VIRT_MROM].base, &address_space_memory); |
| |
| /* copy in the device tree */ |
| if (fdt_pack(s->fdt) || fdt_totalsize(s->fdt) > |
| memmap[VIRT_MROM].size - sizeof(reset_vec)) { |
| error_report("not enough space to store device-tree"); |
| exit(1); |
| } |
| qemu_fdt_dumpdtb(s->fdt, fdt_totalsize(s->fdt)); |
| rom_add_blob_fixed_as("mrom.fdt", s->fdt, fdt_totalsize(s->fdt), |
| memmap[VIRT_MROM].base + sizeof(reset_vec), |
| &address_space_memory); |
| |
| /* create PLIC hart topology configuration string */ |
| plic_hart_config_len = (strlen(VIRT_PLIC_HART_CONFIG) + 1) * smp_cpus; |
| plic_hart_config = g_malloc0(plic_hart_config_len); |
| for (i = 0; i < smp_cpus; i++) { |
| if (i != 0) { |
| strncat(plic_hart_config, ",", plic_hart_config_len); |
| } |
| strncat(plic_hart_config, VIRT_PLIC_HART_CONFIG, plic_hart_config_len); |
| plic_hart_config_len -= (strlen(VIRT_PLIC_HART_CONFIG) + 1); |
| } |
| |
| /* MMIO */ |
| s->plic = sifive_plic_create(memmap[VIRT_PLIC].base, |
| plic_hart_config, |
| VIRT_PLIC_NUM_SOURCES, |
| VIRT_PLIC_NUM_PRIORITIES, |
| VIRT_PLIC_PRIORITY_BASE, |
| VIRT_PLIC_PENDING_BASE, |
| VIRT_PLIC_ENABLE_BASE, |
| VIRT_PLIC_ENABLE_STRIDE, |
| VIRT_PLIC_CONTEXT_BASE, |
| VIRT_PLIC_CONTEXT_STRIDE, |
| memmap[VIRT_PLIC].size); |
| sifive_clint_create(memmap[VIRT_CLINT].base, |
| memmap[VIRT_CLINT].size, smp_cpus, |
| SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, true); |
| sifive_test_create(memmap[VIRT_TEST].base); |
| |
| for (i = 0; i < VIRTIO_COUNT; i++) { |
| sysbus_create_simple("virtio-mmio", |
| memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, |
| qdev_get_gpio_in(DEVICE(s->plic), VIRTIO_IRQ + i)); |
| } |
| |
| gpex_pcie_init(system_memory, |
| memmap[VIRT_PCIE_ECAM].base, |
| memmap[VIRT_PCIE_ECAM].size, |
| memmap[VIRT_PCIE_MMIO].base, |
| memmap[VIRT_PCIE_MMIO].size, |
| memmap[VIRT_PCIE_PIO].base, |
| DEVICE(s->plic), true); |
| |
| serial_mm_init(system_memory, memmap[VIRT_UART0].base, |
| 0, qdev_get_gpio_in(DEVICE(s->plic), UART0_IRQ), 399193, |
| serial_hd(0), DEVICE_LITTLE_ENDIAN); |
| |
| sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base, |
| qdev_get_gpio_in(DEVICE(s->plic), RTC_IRQ)); |
| |
| virt_flash_create(s); |
| |
| for (i = 0; i < ARRAY_SIZE(s->flash); i++) { |
| /* Map legacy -drive if=pflash to machine properties */ |
| pflash_cfi01_legacy_drive(s->flash[i], |
| drive_get(IF_PFLASH, 0, i)); |
| } |
| virt_flash_map(s, system_memory); |
| |
| g_free(plic_hart_config); |
| } |
| |
| static void riscv_virt_machine_instance_init(Object *obj) |
| { |
| } |
| |
| static void riscv_virt_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "RISC-V VirtIO board"; |
| mc->init = riscv_virt_board_init; |
| mc->max_cpus = 8; |
| mc->default_cpu_type = VIRT_CPU; |
| mc->pci_allow_0_address = true; |
| } |
| |
| static const TypeInfo riscv_virt_machine_typeinfo = { |
| .name = MACHINE_TYPE_NAME("virt"), |
| .parent = TYPE_MACHINE, |
| .class_init = riscv_virt_machine_class_init, |
| .instance_init = riscv_virt_machine_instance_init, |
| .instance_size = sizeof(RISCVVirtState), |
| }; |
| |
| static void riscv_virt_machine_init_register_types(void) |
| { |
| type_register_static(&riscv_virt_machine_typeinfo); |
| } |
| |
| type_init(riscv_virt_machine_init_register_types) |
