blob: 6cca6b27d6a9ce4b4cb2fa4077954f533c71bb60 [file] [log] [blame]
/*
* PowerMac NewWorld MacIO GPIO emulation
*
* Copyright (c) 2016 Benjamin Herrenschmidt
* Copyright (c) 2018 Mark Cave-Ayland
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/ppc/mac.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "hw/misc/macio/macio.h"
#include "hw/misc/macio/gpio.h"
#include "hw/nmi.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "trace.h"
void macio_set_gpio(MacIOGPIOState *s, uint32_t gpio, bool state)
{
uint8_t new_reg;
trace_macio_set_gpio(gpio, state);
if (s->gpio_regs[gpio] & 4) {
qemu_log_mask(LOG_GUEST_ERROR,
"GPIO: Setting GPIO %d while it's an output\n", gpio);
}
new_reg = s->gpio_regs[gpio] & ~2;
if (state) {
new_reg |= 2;
}
if (new_reg == s->gpio_regs[gpio]) {
return;
}
s->gpio_regs[gpio] = new_reg;
/* This is will work until we fix the binding between MacIO and
* the MPIC properly so we can route all GPIOs and avoid going
* via the top level platform code.
*
* Note that we probably need to get access to the MPIC config to
* decode polarity since qemu always use "raise" regardless.
*
* For now, we hard wire known GPIOs
*/
switch (gpio) {
case 1:
/* Level low */
if (!state) {
trace_macio_gpio_irq_assert(gpio);
qemu_irq_raise(s->gpio_extirqs[gpio]);
} else {
trace_macio_gpio_irq_deassert(gpio);
qemu_irq_lower(s->gpio_extirqs[gpio]);
}
break;
case 9:
/* Edge, triggered by NMI below */
if (state) {
trace_macio_gpio_irq_assert(gpio);
qemu_irq_raise(s->gpio_extirqs[gpio]);
} else {
trace_macio_gpio_irq_deassert(gpio);
qemu_irq_lower(s->gpio_extirqs[gpio]);
}
break;
default:
qemu_log_mask(LOG_UNIMP, "GPIO: setting unimplemented GPIO %d", gpio);
}
}
static void macio_gpio_write(void *opaque, hwaddr addr, uint64_t value,
unsigned size)
{
MacIOGPIOState *s = opaque;
uint8_t ibit;
trace_macio_gpio_write(addr, value);
/* Levels regs are read-only */
if (addr < 8) {
return;
}
addr -= 8;
if (addr < 36) {
value &= ~2;
if (value & 4) {
ibit = (value & 1) << 1;
} else {
ibit = s->gpio_regs[addr] & 2;
}
s->gpio_regs[addr] = value | ibit;
}
}
static uint64_t macio_gpio_read(void *opaque, hwaddr addr, unsigned size)
{
MacIOGPIOState *s = opaque;
uint64_t val = 0;
/* Levels regs */
if (addr < 8) {
val = s->gpio_levels[addr];
} else {
addr -= 8;
if (addr < 36) {
val = s->gpio_regs[addr];
}
}
trace_macio_gpio_write(addr, val);
return val;
}
static const MemoryRegionOps macio_gpio_ops = {
.read = macio_gpio_read,
.write = macio_gpio_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.impl = {
.min_access_size = 1,
.max_access_size = 1,
},
};
static void macio_gpio_realize(DeviceState *dev, Error **errp)
{
MacIOGPIOState *s = MACIO_GPIO(dev);
s->gpio_extirqs[1] = qdev_get_gpio_in(DEVICE(s->pic),
NEWWORLD_EXTING_GPIO1);
s->gpio_extirqs[9] = qdev_get_gpio_in(DEVICE(s->pic),
NEWWORLD_EXTING_GPIO9);
}
static void macio_gpio_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
MacIOGPIOState *s = MACIO_GPIO(obj);
object_property_add_link(obj, "pic", TYPE_OPENPIC,
(Object **) &s->pic,
qdev_prop_allow_set_link_before_realize,
0, NULL);
memory_region_init_io(&s->gpiomem, OBJECT(s), &macio_gpio_ops, obj,
"gpio", 0x30);
sysbus_init_mmio(sbd, &s->gpiomem);
}
static const VMStateDescription vmstate_macio_gpio = {
.name = "macio_gpio",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT8_ARRAY(gpio_levels, MacIOGPIOState, 8),
VMSTATE_UINT8_ARRAY(gpio_regs, MacIOGPIOState, 36),
VMSTATE_END_OF_LIST()
}
};
static void macio_gpio_reset(DeviceState *dev)
{
MacIOGPIOState *s = MACIO_GPIO(dev);
/* GPIO 1 is up by default */
macio_set_gpio(s, 1, true);
}
static void macio_gpio_nmi(NMIState *n, int cpu_index, Error **errp)
{
macio_set_gpio(MACIO_GPIO(n), 9, true);
macio_set_gpio(MACIO_GPIO(n), 9, false);
}
static void macio_gpio_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
NMIClass *nc = NMI_CLASS(oc);
dc->realize = macio_gpio_realize;
dc->reset = macio_gpio_reset;
dc->vmsd = &vmstate_macio_gpio;
nc->nmi_monitor_handler = macio_gpio_nmi;
}
static const TypeInfo macio_gpio_init_info = {
.name = TYPE_MACIO_GPIO,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(MacIOGPIOState),
.instance_init = macio_gpio_init,
.class_init = macio_gpio_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_NMI },
{ }
},
};
static void macio_gpio_register_types(void)
{
type_register_static(&macio_gpio_init_info);
}
type_init(macio_gpio_register_types)