blob: 96f4d2517acdba38a27b3c7ff751b63118c5a41f [file] [log] [blame]
/*
* RealView ARM11MPCore internal peripheral emulation
*
* Copyright (c) 2006-2007 CodeSourcery.
* Copyright (c) 2013 SUSE LINUX Products GmbH
* Written by Paul Brook and Andreas Färber
*
* This code is licensed under the GPL.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "hw/cpu/arm11mpcore.h"
#include "hw/intc/realview_gic.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#define TYPE_REALVIEW_MPCORE_RIRQ "realview_mpcore"
#define REALVIEW_MPCORE_RIRQ(obj) \
OBJECT_CHECK(mpcore_rirq_state, (obj), TYPE_REALVIEW_MPCORE_RIRQ)
/* Dummy PIC to route IRQ lines. The baseboard has 4 independent IRQ
controllers. The output of these, plus some of the raw input lines
are fed into a single SMP-aware interrupt controller on the CPU. */
typedef struct {
SysBusDevice parent_obj;
qemu_irq cpuic[32];
qemu_irq rvic[4][64];
uint32_t num_cpu;
ARM11MPCorePriveState priv;
RealViewGICState gic[4];
} mpcore_rirq_state;
/* Map baseboard IRQs onto CPU IRQ lines. */
static const int mpcore_irq_map[32] = {
-1, -1, -1, -1, 1, 2, -1, -1,
-1, -1, 6, -1, 4, 5, -1, -1,
-1, 14, 15, 0, 7, 8, -1, -1,
-1, -1, -1, -1, 9, 3, -1, -1,
};
static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
{
mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
int i;
for (i = 0; i < 4; i++) {
qemu_set_irq(s->rvic[i][irq], level);
}
if (irq < 32) {
irq = mpcore_irq_map[irq];
if (irq >= 0) {
qemu_set_irq(s->cpuic[irq], level);
}
}
}
static void realview_mpcore_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
mpcore_rirq_state *s = REALVIEW_MPCORE_RIRQ(dev);
DeviceState *priv = DEVICE(&s->priv);
DeviceState *gic;
SysBusDevice *gicbusdev;
int n;
int i;
qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->priv), errp)) {
return;
}
sysbus_pass_irq(sbd, SYS_BUS_DEVICE(&s->priv));
for (i = 0; i < 32; i++) {
s->cpuic[i] = qdev_get_gpio_in(priv, i);
}
/* ??? IRQ routing is hardcoded to "normal" mode. */
for (n = 0; n < 4; n++) {
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic[n]), errp)) {
return;
}
gic = DEVICE(&s->gic[n]);
gicbusdev = SYS_BUS_DEVICE(&s->gic[n]);
sysbus_mmio_map(gicbusdev, 0, 0x10040000 + n * 0x10000);
sysbus_connect_irq(gicbusdev, 0, s->cpuic[10 + n]);
for (i = 0; i < 64; i++) {
s->rvic[n][i] = qdev_get_gpio_in(gic, i);
}
}
qdev_init_gpio_in(dev, mpcore_rirq_set_irq, 64);
}
static void mpcore_rirq_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
mpcore_rirq_state *s = REALVIEW_MPCORE_RIRQ(obj);
SysBusDevice *privbusdev;
int i;
object_initialize_child(obj, "a11priv", &s->priv, TYPE_ARM11MPCORE_PRIV);
privbusdev = SYS_BUS_DEVICE(&s->priv);
sysbus_init_mmio(sbd, sysbus_mmio_get_region(privbusdev, 0));
for (i = 0; i < 4; i++) {
object_initialize_child(obj, "gic[*]", &s->gic[i], TYPE_REALVIEW_GIC);
}
}
static Property mpcore_rirq_properties[] = {
DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
DEFINE_PROP_END_OF_LIST(),
};
static void mpcore_rirq_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = realview_mpcore_realize;
device_class_set_props(dc, mpcore_rirq_properties);
}
static const TypeInfo mpcore_rirq_info = {
.name = TYPE_REALVIEW_MPCORE_RIRQ,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(mpcore_rirq_state),
.instance_init = mpcore_rirq_init,
.class_init = mpcore_rirq_class_init,
};
static void realview_mpcore_register_types(void)
{
type_register_static(&mpcore_rirq_info);
}
type_init(realview_mpcore_register_types)