Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-04-07' into staging
Block patches for 5.0-rc2:
- Fix double QLIST_REMOVE() and potential request object leak in
xen-block
- Prevent a potential assertion failure in qcow2's code for compressed
clusters by rejecting invalid (unaligned) requests with -EIO
- Prevent discards on qcow2 v2 images from making backing data reappear
- Make qemu-img convert report I/O error locations by byte offsets
consistently
- Fix for potential I/O test errors (accidental globbing due to missing
quotes)
# gpg: Signature made Tue 07 Apr 2020 13:30:01 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-04-07:
xen-block: Fix double qlist remove and request leak
iotests/common.pattern: Quote echos
qcow2: Check request size in qcow2_co_pwritev_compressed_part()
qemu-img: Report convert errors by bytes, not sectors
qcow2: Forbid discard in qcow2 v2 images with backing files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
diff --git a/block/qcow2.c b/block/qcow2.c
index 2bb536b..b524b0c 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -3784,6 +3784,12 @@
int ret;
BDRVQcow2State *s = bs->opaque;
+ /* If the image does not support QCOW_OFLAG_ZERO then discarding
+ * clusters could expose stale data from the backing file. */
+ if (s->qcow_version < 3 && bs->backing) {
+ return -ENOTSUP;
+ }
+
if (!QEMU_IS_ALIGNED(offset | bytes, s->cluster_size)) {
assert(bytes < s->cluster_size);
/* Ignore partial clusters, except for the special case of the
@@ -4349,6 +4355,11 @@
return -EINVAL;
}
+ if (offset_into_cluster(s, bytes) &&
+ (offset + bytes) != (bs->total_sectors << BDRV_SECTOR_BITS)) {
+ return -EINVAL;
+ }
+
while (bytes && aio_task_pool_status(aio) == 0) {
uint64_t chunk_size = MIN(bytes, s->cluster_size);
diff --git a/hw/block/dataplane/xen-block.c b/hw/block/dataplane/xen-block.c
index 288a87a..5f8f157 100644
--- a/hw/block/dataplane/xen-block.c
+++ b/hw/block/dataplane/xen-block.c
@@ -64,6 +64,8 @@
AioContext *ctx;
};
+static int xen_block_send_response(XenBlockRequest *request);
+
static void reset_request(XenBlockRequest *request)
{
memset(&request->req, 0, sizeof(request->req));
@@ -115,23 +117,26 @@
return request;
}
-static void xen_block_finish_request(XenBlockRequest *request)
+static void xen_block_complete_request(XenBlockRequest *request)
{
XenBlockDataPlane *dataplane = request->dataplane;
+ if (xen_block_send_response(request)) {
+ Error *local_err = NULL;
+
+ xen_device_notify_event_channel(dataplane->xendev,
+ dataplane->event_channel,
+ &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+ }
+
QLIST_REMOVE(request, list);
dataplane->requests_inflight--;
-}
-
-static void xen_block_release_request(XenBlockRequest *request)
-{
- XenBlockDataPlane *dataplane = request->dataplane;
-
- QLIST_REMOVE(request, list);
reset_request(request);
request->dataplane = dataplane;
QLIST_INSERT_HEAD(&dataplane->freelist, request, list);
- dataplane->requests_inflight--;
}
/*
@@ -246,7 +251,6 @@
}
static int xen_block_do_aio(XenBlockRequest *request);
-static int xen_block_send_response(XenBlockRequest *request);
static void xen_block_complete_aio(void *opaque, int ret)
{
@@ -286,7 +290,6 @@
}
request->status = request->aio_errors ? BLKIF_RSP_ERROR : BLKIF_RSP_OKAY;
- xen_block_finish_request(request);
switch (request->req.operation) {
case BLKIF_OP_WRITE:
@@ -306,17 +309,8 @@
default:
break;
}
- if (xen_block_send_response(request)) {
- Error *local_err = NULL;
- xen_device_notify_event_channel(dataplane->xendev,
- dataplane->event_channel,
- &local_err);
- if (local_err) {
- error_report_err(local_err);
- }
- }
- xen_block_release_request(request);
+ xen_block_complete_request(request);
if (dataplane->more_work) {
qemu_bh_schedule(dataplane->bh);
@@ -420,8 +414,8 @@
return 0;
err:
- xen_block_finish_request(request);
request->status = BLKIF_RSP_ERROR;
+ xen_block_complete_request(request);
return -1;
}
@@ -575,17 +569,7 @@
break;
};
- if (xen_block_send_response(request)) {
- Error *local_err = NULL;
-
- xen_device_notify_event_channel(dataplane->xendev,
- dataplane->event_channel,
- &local_err);
- if (local_err) {
- error_report_err(local_err);
- }
- }
- xen_block_release_request(request);
+ xen_block_complete_request(request);
continue;
}
diff --git a/qemu-img.c b/qemu-img.c
index b167376..821cbf6 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1924,8 +1924,8 @@
if (status == BLK_DATA && !copy_range) {
ret = convert_co_read(s, sector_num, n, buf);
if (ret < 0) {
- error_report("error while reading sector %" PRId64
- ": %s", sector_num, strerror(-ret));
+ error_report("error while reading at byte %lld: %s",
+ sector_num * BDRV_SECTOR_SIZE, strerror(-ret));
s->ret = ret;
}
} else if (!s->min_sparse && status == BLK_ZERO) {
@@ -1953,8 +1953,8 @@
ret = convert_co_write(s, sector_num, n, buf, status);
}
if (ret < 0) {
- error_report("error while writing sector %" PRId64
- ": %s", sector_num, strerror(-ret));
+ error_report("error while writing at byte %lld: %s",
+ sector_num * BDRV_SECTOR_SIZE, strerror(-ret));
s->ret = ret;
}
}
diff --git a/tests/qemu-iotests/046 b/tests/qemu-iotests/046
index a066eec..ecbe5fc 100755
--- a/tests/qemu-iotests/046
+++ b/tests/qemu-iotests/046
@@ -193,8 +193,8 @@
verify_io()
{
if ($QEMU_IMG info -U -f "$IMGFMT" "$TEST_IMG" | grep "compat: 0.10" > /dev/null); then
- # For v2 images, discarded clusters are read from the backing file
- # Keep the variable empty so that the backing file value can be used as
+ # In v2 images clusters are not discarded when there is a backing file.
+ # Keep the variable empty so that the previous value can be used as
# the default below
discarded=
else
@@ -230,14 +230,16 @@
echo read -P 70 0x78000 0x6000
echo read -P 7 0x7e000 0x2000
- echo read -P ${discarded:-8} 0x80000 0x6000
+ echo read -P ${discarded:-89} 0x80000 0x1000
+ echo read -P ${discarded:-8} 0x81000 0x5000
echo read -P 80 0x86000 0x2000
echo read -P ${discarded:-8} 0x88000 0x2000
echo read -P 81 0x8a000 0xe000
echo read -P 90 0x98000 0x6000
echo read -P 9 0x9e000 0x2000
- echo read -P ${discarded:-10} 0xa0000 0x6000
+ echo read -P ${discarded:-109} 0xa0000 0x1000
+ echo read -P ${discarded:-10} 0xa1000 0x5000
echo read -P 100 0xa6000 0x2000
echo read -P ${discarded:-10} 0xa8000 0x2000
echo read -P 101 0xaa000 0xe000
diff --git a/tests/qemu-iotests/046.out b/tests/qemu-iotests/046.out
index ca2c740..7078304 100644
--- a/tests/qemu-iotests/046.out
+++ b/tests/qemu-iotests/046.out
@@ -187,8 +187,10 @@
24 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 8192/8192 bytes at offset 516096
8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 24576/24576 bytes at offset 524288
-24 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4096/4096 bytes at offset 524288
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 20480/20480 bytes at offset 528384
+20 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 8192/8192 bytes at offset 548864
8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 8192/8192 bytes at offset 557056
@@ -199,8 +201,10 @@
24 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 8192/8192 bytes at offset 647168
8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-read 24576/24576 bytes at offset 655360
-24 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 4096/4096 bytes at offset 655360
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 20480/20480 bytes at offset 659456
+20 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 8192/8192 bytes at offset 679936
8 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 8192/8192 bytes at offset 688128
diff --git a/tests/qemu-iotests/060 b/tests/qemu-iotests/060
index 043f129..32c0ecc 100755
--- a/tests/qemu-iotests/060
+++ b/tests/qemu-iotests/060
@@ -160,18 +160,16 @@
$QEMU_IO -c 'write 0k 64k' "$BACKING_IMG" | _filter_qemu_io
-# compat=0.10 is required in order to make the following discard actually
-# unallocate the sector rather than make it a zero sector - we want COW, after
-# all.
-_make_test_img -o 'compat=0.10' -b "$BACKING_IMG" 1G
+_make_test_img -b "$BACKING_IMG" 1G
# Write two clusters, the second one enforces creation of an L2 table after
# the first data cluster.
$QEMU_IO -c 'write 0k 64k' -c 'write 512M 64k' "$TEST_IMG" | _filter_qemu_io
-# Discard the first cluster. This cluster will soon enough be reallocated and
+# Free the first cluster. This cluster will soon enough be reallocated and
# used for COW.
-$QEMU_IO -c 'discard 0k 64k' "$TEST_IMG" | _filter_qemu_io
+poke_file "$TEST_IMG" "$l2_offset" "\x00\x00\x00\x00\x00\x00\x00\x00"
+poke_file "$TEST_IMG" "$(($rb_offset+10))" "\x00\x00"
# Now, corrupt the image by marking the second L2 table cluster as free.
-poke_file "$TEST_IMG" '131084' "\x00\x00" # 0x2000c
+poke_file "$TEST_IMG" "$(($rb_offset+12))" "\x00\x00"
# Start a write operation requiring COW on the image stopping it right before
# doing the read; then, trigger the corruption prevention by writing anything to
# any unallocated cluster, leading to an attempt to overwrite the second L2
diff --git a/tests/qemu-iotests/060.out b/tests/qemu-iotests/060.out
index d27692a..09caaea 100644
--- a/tests/qemu-iotests/060.out
+++ b/tests/qemu-iotests/060.out
@@ -105,8 +105,6 @@
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 65536/65536 bytes at offset 536870912
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-discard 65536/65536 bytes at offset 0
-64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
qcow2: Marking image as corrupt: Preventing invalid write on metadata (overlaps with active L2 table); further corruption events will be suppressed
blkdebug: Suspended request '0'
write failed: Input/output error
diff --git a/tests/qemu-iotests/177 b/tests/qemu-iotests/177
index 752d29f..eadc2c7 100755
--- a/tests/qemu-iotests/177
+++ b/tests/qemu-iotests/177
@@ -89,8 +89,9 @@
{
if ($QEMU_IMG info -f "$IMGFMT" "$TEST_IMG" |
grep "compat: 0.10" > /dev/null); then
- # For v2 images, discarded clusters are read from the backing file
- discarded=11
+ # In v2 images clusters are not discarded when there is a backing file
+ # so the previous value is read
+ discarded=22
else
# Discarded clusters are zeroed for v3 or later
discarded=0
diff --git a/tests/qemu-iotests/244.out b/tests/qemu-iotests/244.out
index e6f4dc7..56329de 100644
--- a/tests/qemu-iotests/244.out
+++ b/tests/qemu-iotests/244.out
@@ -33,7 +33,7 @@
Formatting 'TEST_DIR/t.IMGFMT.src', fmt=IMGFMT size=67108864
wrote 1048576/1048576 bytes at offset 0
1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-img: error while writing sector 0: Operation not supported
+qemu-img: error while writing at byte 0: Operation not supported
Convert uncompressed, then write compressed data manually:
Images are identical.
diff --git a/tests/qemu-iotests/290 b/tests/qemu-iotests/290
new file mode 100755
index 0000000..776b65e
--- /dev/null
+++ b/tests/qemu-iotests/290
@@ -0,0 +1,97 @@
+#!/usr/bin/env bash
+#
+# Test how 'qemu-io -c discard' behaves on v2 and v3 qcow2 images
+#
+# Copyright (C) 2020 Igalia, S.L.
+# Author: Alberto Garcia <berto@igalia.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=berto@igalia.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt qcow2
+_supported_proto file
+_supported_os Linux
+_unsupported_imgopts 'compat=0.10' refcount_bits data_file
+
+echo
+echo "### Test 'qemu-io -c discard' on a QCOW2 image without a backing file"
+echo
+for qcow2_compat in 0.10 1.1; do
+ echo "# Create an image with compat=$qcow2_compat without a backing file"
+ _make_test_img -o "compat=$qcow2_compat" 128k
+
+ echo "# Fill all clusters with data and then discard them"
+ $QEMU_IO -c 'write -P 0x01 0 128k' "$TEST_IMG" | _filter_qemu_io
+ $QEMU_IO -c 'discard 0 128k' "$TEST_IMG" | _filter_qemu_io
+
+ echo "# Read the data from the discarded clusters"
+ $QEMU_IO -c 'read -P 0x00 0 128k' "$TEST_IMG" | _filter_qemu_io
+
+ echo "# Output of qemu-img map"
+ $QEMU_IMG map "$TEST_IMG" | _filter_testdir
+done
+
+echo
+echo "### Test 'qemu-io -c discard' on a QCOW2 image with a backing file"
+echo
+
+echo "# Create a backing image and fill it with data"
+BACKING_IMG="$TEST_IMG.base"
+TEST_IMG="$BACKING_IMG" _make_test_img 128k
+$QEMU_IO -c 'write -P 0xff 0 128k' "$BACKING_IMG" | _filter_qemu_io
+
+for qcow2_compat in 0.10 1.1; do
+ echo "# Create an image with compat=$qcow2_compat and a backing file"
+ _make_test_img -o "compat=$qcow2_compat" -b "$BACKING_IMG"
+
+ echo "# Fill all clusters with data and then discard them"
+ $QEMU_IO -c 'write -P 0x01 0 128k' "$TEST_IMG" | _filter_qemu_io
+ $QEMU_IO -c 'discard 0 128k' "$TEST_IMG" | _filter_qemu_io
+
+ echo "# Read the data from the discarded clusters"
+ if [ "$qcow2_compat" = "1.1" ]; then
+ # In qcow2 v3 clusters are zeroed (with QCOW_OFLAG_ZERO)
+ $QEMU_IO -c 'read -P 0x00 0 128k' "$TEST_IMG" | _filter_qemu_io
+ else
+ # In qcow2 v2 if there's a backing image we cannot zero the clusters
+ # without exposing the backing file data so discard does nothing
+ $QEMU_IO -c 'read -P 0x01 0 128k' "$TEST_IMG" | _filter_qemu_io
+ fi
+
+ echo "# Output of qemu-img map"
+ $QEMU_IMG map "$TEST_IMG" | _filter_testdir
+done
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/290.out b/tests/qemu-iotests/290.out
new file mode 100644
index 0000000..d2259c8
--- /dev/null
+++ b/tests/qemu-iotests/290.out
@@ -0,0 +1,61 @@
+QA output created by 290
+
+### Test 'qemu-io -c discard' on a QCOW2 image without a backing file
+
+# Create an image with compat=0.10 without a backing file
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072
+# Fill all clusters with data and then discard them
+wrote 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+discard 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Read the data from the discarded clusters
+read 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Output of qemu-img map
+Offset Length Mapped to File
+# Create an image with compat=1.1 without a backing file
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072
+# Fill all clusters with data and then discard them
+wrote 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+discard 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Read the data from the discarded clusters
+read 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Output of qemu-img map
+Offset Length Mapped to File
+
+### Test 'qemu-io -c discard' on a QCOW2 image with a backing file
+
+# Create a backing image and fill it with data
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=131072
+wrote 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Create an image with compat=0.10 and a backing file
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base
+# Fill all clusters with data and then discard them
+wrote 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+discard 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Read the data from the discarded clusters
+read 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Output of qemu-img map
+Offset Length Mapped to File
+0 0x20000 0x50000 TEST_DIR/t.qcow2
+# Create an image with compat=1.1 and a backing file
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base
+# Fill all clusters with data and then discard them
+wrote 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+discard 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Read the data from the discarded clusters
+read 131072/131072 bytes at offset 0
+128 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+# Output of qemu-img map
+Offset Length Mapped to File
+*** done
diff --git a/tests/qemu-iotests/common.pattern b/tests/qemu-iotests/common.pattern
index 4f5e5bc..4caa5de 100644
--- a/tests/qemu-iotests/common.pattern
+++ b/tests/qemu-iotests/common.pattern
@@ -23,7 +23,7 @@
local count=$4
for ((i=1;i<=$count;i++)); do
- echo alloc $(( start + (i - 1) * step )) $size
+ echo "alloc $(( start + (i - 1) * step )) $size"
done
}
@@ -39,9 +39,9 @@
local count=$5
local pattern=$6
- echo === IO: pattern $pattern >&2
+ echo "=== IO: pattern $pattern" >&2
for ((i=1;i<=$count;i++)); do
- echo $op -P $pattern $(( start + (i - 1) * step )) $size
+ echo "$op -P $pattern $(( start + (i - 1) * step )) $size"
done
}
@@ -110,31 +110,31 @@
# free - free - compressed
# Write the clusters to be compressed
- echo === Clusters to be compressed [1]
+ echo '=== Clusters to be compressed [1]'
io_pattern writev $((offset + 4 * $cluster_size)) $cluster_size $((9 * $cluster_size)) $num 165
- echo === Clusters to be compressed [2]
+ echo '=== Clusters to be compressed [2]'
io_pattern writev $((offset + 5 * $cluster_size)) $cluster_size $((9 * $cluster_size)) $num 165
- echo === Clusters to be compressed [3]
+ echo '=== Clusters to be compressed [3]'
io_pattern writev $((offset + 8 * $cluster_size)) $cluster_size $((9 * $cluster_size)) $num 165
mv "$TEST_IMG" "$TEST_IMG.orig"
$QEMU_IMG convert -f $IMGFMT -O $IMGFMT -c "$TEST_IMG.orig" "$TEST_IMG"
# Write the used clusters
- echo === Used clusters [1]
+ echo '=== Used clusters [1]'
io_pattern writev $((offset + 0 * $cluster_size)) $cluster_size $((9 * $cluster_size)) $num 165
- echo === Used clusters [2]
+ echo '=== Used clusters [2]'
io_pattern writev $((offset + 1 * $cluster_size)) $cluster_size $((9 * $cluster_size)) $num 165
- echo === Used clusters [3]
+ echo '=== Used clusters [3]'
io_pattern writev $((offset + 3 * $cluster_size)) $cluster_size $((9 * $cluster_size)) $num 165
# Read them
- echo === Read used/compressed clusters
+ echo '=== Read used/compressed clusters'
io_pattern readv $((offset + 0 * $cluster_size)) $((2 * $cluster_size)) $((9 * $cluster_size)) $num 165
io_pattern readv $((offset + 3 * $cluster_size)) $((3 * $cluster_size)) $((9 * $cluster_size)) $num 165
io_pattern readv $((offset + 8 * $cluster_size)) $((1 * $cluster_size)) $((9 * $cluster_size)) $num 165
- echo === Read zeros
+ echo '=== Read zeros'
io_zero readv $((offset + 2 * $cluster_size)) $((1 * $cluster_size)) $((9 * $cluster_size)) $num
io_zero readv $((offset + 6 * $cluster_size)) $((2 * $cluster_size)) $((9 * $cluster_size)) $num
}
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 79c6dfc..435dccd 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -296,3 +296,4 @@
286 rw quick
288 quick
289 rw quick
+290 rw auto quick
