| /* |
| * QEMU model of the Milkymist UART block. |
| * |
| * Copyright (c) 2010 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * Specification available at: |
| * http://milkymist.walle.cc/socdoc/uart.pdf |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/sysbus.h" |
| #include "trace.h" |
| #include "sysemu/char.h" |
| #include "qemu/error-report.h" |
| |
| enum { |
| R_RXTX = 0, |
| R_DIV, |
| R_STAT, |
| R_CTRL, |
| R_DBG, |
| R_MAX |
| }; |
| |
| enum { |
| STAT_THRE = (1<<0), |
| STAT_RX_EVT = (1<<1), |
| STAT_TX_EVT = (1<<2), |
| }; |
| |
| enum { |
| CTRL_RX_IRQ_EN = (1<<0), |
| CTRL_TX_IRQ_EN = (1<<1), |
| CTRL_THRU_EN = (1<<2), |
| }; |
| |
| enum { |
| DBG_BREAK_EN = (1<<0), |
| }; |
| |
| #define TYPE_MILKYMIST_UART "milkymist-uart" |
| #define MILKYMIST_UART(obj) \ |
| OBJECT_CHECK(MilkymistUartState, (obj), TYPE_MILKYMIST_UART) |
| |
| struct MilkymistUartState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion regs_region; |
| CharBackend chr; |
| qemu_irq irq; |
| |
| uint32_t regs[R_MAX]; |
| }; |
| typedef struct MilkymistUartState MilkymistUartState; |
| |
| static void uart_update_irq(MilkymistUartState *s) |
| { |
| int rx_event = s->regs[R_STAT] & STAT_RX_EVT; |
| int tx_event = s->regs[R_STAT] & STAT_TX_EVT; |
| int rx_irq_en = s->regs[R_CTRL] & CTRL_RX_IRQ_EN; |
| int tx_irq_en = s->regs[R_CTRL] & CTRL_TX_IRQ_EN; |
| |
| if ((rx_irq_en && rx_event) || (tx_irq_en && tx_event)) { |
| trace_milkymist_uart_raise_irq(); |
| qemu_irq_raise(s->irq); |
| } else { |
| trace_milkymist_uart_lower_irq(); |
| qemu_irq_lower(s->irq); |
| } |
| } |
| |
| static uint64_t uart_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| MilkymistUartState *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_RXTX: |
| r = s->regs[addr]; |
| break; |
| case R_DIV: |
| case R_STAT: |
| case R_CTRL: |
| case R_DBG: |
| r = s->regs[addr]; |
| break; |
| |
| default: |
| error_report("milkymist_uart: read access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| trace_milkymist_uart_memory_read(addr << 2, r); |
| |
| return r; |
| } |
| |
| static void uart_write(void *opaque, hwaddr addr, uint64_t value, |
| unsigned size) |
| { |
| MilkymistUartState *s = opaque; |
| unsigned char ch = value; |
| |
| trace_milkymist_uart_memory_write(addr, value); |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_RXTX: |
| qemu_chr_fe_write_all(&s->chr, &ch, 1); |
| s->regs[R_STAT] |= STAT_TX_EVT; |
| break; |
| case R_DIV: |
| case R_CTRL: |
| case R_DBG: |
| s->regs[addr] = value; |
| break; |
| |
| case R_STAT: |
| /* write one to clear bits */ |
| s->regs[addr] &= ~(value & (STAT_RX_EVT | STAT_TX_EVT)); |
| qemu_chr_fe_accept_input(&s->chr); |
| break; |
| |
| default: |
| error_report("milkymist_uart: write access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| uart_update_irq(s); |
| } |
| |
| static const MemoryRegionOps uart_mmio_ops = { |
| .read = uart_read, |
| .write = uart_write, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void uart_rx(void *opaque, const uint8_t *buf, int size) |
| { |
| MilkymistUartState *s = opaque; |
| |
| assert(!(s->regs[R_STAT] & STAT_RX_EVT)); |
| |
| s->regs[R_STAT] |= STAT_RX_EVT; |
| s->regs[R_RXTX] = *buf; |
| |
| uart_update_irq(s); |
| } |
| |
| static int uart_can_rx(void *opaque) |
| { |
| MilkymistUartState *s = opaque; |
| |
| return !(s->regs[R_STAT] & STAT_RX_EVT); |
| } |
| |
| static void uart_event(void *opaque, int event) |
| { |
| } |
| |
| static void milkymist_uart_reset(DeviceState *d) |
| { |
| MilkymistUartState *s = MILKYMIST_UART(d); |
| int i; |
| |
| for (i = 0; i < R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| |
| /* THRE is always set */ |
| s->regs[R_STAT] = STAT_THRE; |
| } |
| |
| static void milkymist_uart_realize(DeviceState *dev, Error **errp) |
| { |
| MilkymistUartState *s = MILKYMIST_UART(dev); |
| |
| qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, |
| uart_event, s, NULL, true); |
| } |
| |
| static void milkymist_uart_init(Object *obj) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| MilkymistUartState *s = MILKYMIST_UART(obj); |
| |
| sysbus_init_irq(sbd, &s->irq); |
| |
| memory_region_init_io(&s->regs_region, OBJECT(s), &uart_mmio_ops, s, |
| "milkymist-uart", R_MAX * 4); |
| sysbus_init_mmio(sbd, &s->regs_region); |
| } |
| |
| static const VMStateDescription vmstate_milkymist_uart = { |
| .name = "milkymist-uart", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, MilkymistUartState, R_MAX), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property milkymist_uart_properties[] = { |
| DEFINE_PROP_CHR("chardev", MilkymistUartState, chr), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void milkymist_uart_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = milkymist_uart_realize; |
| dc->reset = milkymist_uart_reset; |
| dc->vmsd = &vmstate_milkymist_uart; |
| dc->props = milkymist_uart_properties; |
| } |
| |
| static const TypeInfo milkymist_uart_info = { |
| .name = TYPE_MILKYMIST_UART, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(MilkymistUartState), |
| .instance_init = milkymist_uart_init, |
| .class_init = milkymist_uart_class_init, |
| }; |
| |
| static void milkymist_uart_register_types(void) |
| { |
| type_register_static(&milkymist_uart_info); |
| } |
| |
| type_init(milkymist_uart_register_types) |