| # Makefile.in generated by automake 1.14.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2013 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # |
| # Copyright (c) 2014-2018 Nest Labs, Inc. |
| # Copyright (c) 2018 Google LLC |
| # All rights reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # Description: |
| # This file is the GNU automake template for the Nest Weave SDK. |
| # |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| subdir = . |
| DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/configure $(am__configure_deps) \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs \ |
| $(dist_doc_DATA) \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/ar-lib \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/compile \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/config.sub \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/depcomp \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/install-sh \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/missing \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/py-compile \ |
| third_party/nlbuild-autotools/repo/third_party/autoconf/ltmain.sh \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/compile \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.sub \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/install-sh \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/ltmain.sh \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/missing |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/ax_check_compiler.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_coverage.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_coverage_reporting.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_debug.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_docs.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_optimization.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_tests.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_werror.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_filtered_canonical.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_prog_lndir.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_werror.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_with_package.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ax_compare_version.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ax_cxx_compile_stdcxx.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ax_cxx_compile_stdcxx_11.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ax_jni_include_dir.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ax_pthread.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/libtool.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltoptions.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltsugar.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltversion.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/pkg.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_check_project_config_includes.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_enable_long_tests.m4 \ |
| $(top_srcdir)/build/autoconf/m4/nl_with_lwip.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(SHELL) \ |
| $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/src/include/BuildConfig.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__installdirs = "$(DESTDIR)$(docdir)" |
| DATA = $(dist_doc_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| cscope distdir dist dist-all distcheck |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| CSCOPE = cscope |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| DIST_ARCHIVES = $(distdir).tar.gz |
| GZIP_ENV = --best |
| DIST_TARGETS = dist-gzip |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BLUEZ_CPPFLAGS = @BLUEZ_CPPFLAGS@ |
| BLUEZ_LDFLAGS = @BLUEZ_LDFLAGS@ |
| BLUEZ_LIBS = @BLUEZ_LIBS@ |
| BLUEZ_SUBDIRS = @BLUEZ_SUBDIRS@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CMP = @CMP@ |
| CONFIG_DEVICE_LAYER = @CONFIG_DEVICE_LAYER@ |
| CONFIG_HAVE_HEAP = @CONFIG_HAVE_HEAP@ |
| CONFIG_HAVE_VCBPRINTF = @CONFIG_HAVE_VCBPRINTF@ |
| CONFIG_HAVE_VSNPRINTF_EX = @CONFIG_HAVE_VSNPRINTF_EX@ |
| CONFIG_NETWORK_LAYER_BLE = @CONFIG_NETWORK_LAYER_BLE@ |
| CONFIG_NETWORK_LAYER_INET = @CONFIG_NETWORK_LAYER_INET@ |
| CONFIG_TARGET_NETWORKS = @CONFIG_TARGET_NETWORKS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CROSS_SDK = @CROSS_SDK@ |
| CROSS_SYSROOT = @CROSS_SYSROOT@ |
| CROSS_TOP = @CROSS_TOP@ |
| CURL_CPPFLAGS = @CURL_CPPFLAGS@ |
| CURL_LDFLAGS = @CURL_LDFLAGS@ |
| CURL_LIBS = @CURL_LIBS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DBUS_CFLAGS = @DBUS_CFLAGS@ |
| DBUS_LIBS = @DBUS_LIBS@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DOT = @DOT@ |
| DOXYGEN = @DOXYGEN@ |
| DOXYGEN_USE_DOT = @DOXYGEN_USE_DOT@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GENHTML = @GENHTML@ |
| GLIB_CFLAGS = @GLIB_CFLAGS@ |
| GLIB_LIBS = @GLIB_LIBS@ |
| GREP = @GREP@ |
| HAPPY_DNS = @HAPPY_DNS@ |
| HAPPY_PATH = @HAPPY_PATH@ |
| HAPPY_SERVICE = @HAPPY_SERVICE@ |
| HAVE_CXX11 = @HAVE_CXX11@ |
| HAVE_IN6_RTMSG = @HAVE_IN6_RTMSG@ |
| HAVE_LINUX_IF_TUN_H = @HAVE_LINUX_IF_TUN_H@ |
| HAVE_LINUX_IPV6_ROUTE_H = @HAVE_LINUX_IPV6_ROUTE_H@ |
| HAVE_LINUX_ROUTE_H = @HAVE_LINUX_ROUTE_H@ |
| INET_ENDPOINTS = @INET_ENDPOINTS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| JAR = @JAR@ |
| JAVAC = @JAVAC@ |
| JAVA_HOME = @JAVA_HOME@ |
| JNI_CPPFLAGS = @JNI_CPPFLAGS@ |
| LCOV = @LCOV@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIBWEAVE_VERSION_AGE = @LIBWEAVE_VERSION_AGE@ |
| LIBWEAVE_VERSION_CURRENT = @LIBWEAVE_VERSION_CURRENT@ |
| LIBWEAVE_VERSION_INFO = @LIBWEAVE_VERSION_INFO@ |
| LIBWEAVE_VERSION_REVISION = @LIBWEAVE_VERSION_REVISION@ |
| LIPO = @LIPO@ |
| LNDIR = @LNDIR@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LWIP_CPPFLAGS = @LWIP_CPPFLAGS@ |
| LWIP_LDFLAGS = @LWIP_LDFLAGS@ |
| LWIP_LIBS = @LWIP_LIBS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MKDIR_P = @MKDIR_P@ |
| NLASSERT_CPPFLAGS = @NLASSERT_CPPFLAGS@ |
| NLASSERT_LDFLAGS = @NLASSERT_LDFLAGS@ |
| NLASSERT_LIBS = @NLASSERT_LIBS@ |
| NLASSERT_SUBDIRS = @NLASSERT_SUBDIRS@ |
| NLFAULTINJECTION_CPPFLAGS = @NLFAULTINJECTION_CPPFLAGS@ |
| NLFAULTINJECTION_LDFLAGS = @NLFAULTINJECTION_LDFLAGS@ |
| NLFAULTINJECTION_LIBS = @NLFAULTINJECTION_LIBS@ |
| NLFAULTINJECTION_SUBDIRS = @NLFAULTINJECTION_SUBDIRS@ |
| NLIO_CPPFLAGS = @NLIO_CPPFLAGS@ |
| NLIO_LDFLAGS = @NLIO_LDFLAGS@ |
| NLIO_LIBS = @NLIO_LIBS@ |
| NLIO_SUBDIRS = @NLIO_SUBDIRS@ |
| NLUNIT_TEST_CPPFLAGS = @NLUNIT_TEST_CPPFLAGS@ |
| NLUNIT_TEST_LDFLAGS = @NLUNIT_TEST_LDFLAGS@ |
| NLUNIT_TEST_LIBS = @NLUNIT_TEST_LIBS@ |
| NLUNIT_TEST_SUBDIRS = @NLUNIT_TEST_SUBDIRS@ |
| NL_PROJECT_CONFIG_INCLUDES = @NL_PROJECT_CONFIG_INCLUDES@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJC = @OBJC@ |
| OBJCDEPMODE = @OBJCDEPMODE@ |
| OBJCFLAGS = @OBJCFLAGS@ |
| OBJCOPY = @OBJCOPY@ |
| OBJCXX = @OBJCXX@ |
| OBJCXXCPP = @OBJCXXCPP@ |
| OBJCXXDEPMODE = @OBJCXXDEPMODE@ |
| OBJCXXFLAGS = @OBJCXXFLAGS@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OPENSSL_CPPFLAGS = @OPENSSL_CPPFLAGS@ |
| OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@ |
| OPENSSL_LIBS = @OPENSSL_LIBS@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = $(WEAVE_VERSION) |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ |
| PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ |
| PRETTY_CHECK = @PRETTY_CHECK@ |
| PRETTY_CHECK_ARGS = @PRETTY_CHECK_ARGS@ |
| PTHREAD_CC = @PTHREAD_CC@ |
| PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ |
| PTHREAD_LIBS = @PTHREAD_LIBS@ |
| PYTHON = @PYTHON@ |
| PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ |
| PYTHON_PLATFORM = @PYTHON_PLATFORM@ |
| PYTHON_PREFIX = @PYTHON_PREFIX@ |
| PYTHON_VERSION = @PYTHON_VERSION@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SOCKETS_CPPFLAGS = @SOCKETS_CPPFLAGS@ |
| SOCKETS_LDFLAGS = @SOCKETS_LDFLAGS@ |
| SOCKETS_LIBS = @SOCKETS_LIBS@ |
| STRIP = @STRIP@ |
| VERSION = $(PACKAGE_VERSION) |
| VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@ |
| VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@ |
| VISIBILITY_OBJCFLAGS = @VISIBILITY_OBJCFLAGS@ |
| VISIBILITY_OBJCXXCFLAGS = @VISIBILITY_OBJCXXCFLAGS@ |
| WEAVE_DEVICE_LAYER_TARGET = @WEAVE_DEVICE_LAYER_TARGET@ |
| WEAVE_DEVICE_LAYER_TARGET_ESP32 = @WEAVE_DEVICE_LAYER_TARGET_ESP32@ |
| WEAVE_LOGGING_STYLE = @WEAVE_LOGGING_STYLE@ |
| WEAVE_LOGGING_STYLE_ANDROID = @WEAVE_LOGGING_STYLE_ANDROID@ |
| WEAVE_LOGGING_STYLE_EXTERNAL = @WEAVE_LOGGING_STYLE_EXTERNAL@ |
| WEAVE_LOGGING_STYLE_STDIO = @WEAVE_LOGGING_STYLE_STDIO@ |
| WEAVE_LOGGING_STYLE_STDIO_WEAK = @WEAVE_LOGGING_STYLE_STDIO_WEAK@ |
| WEAVE_OPENSSL_TARGET = @WEAVE_OPENSSL_TARGET@ |
| WEAVE_OPENSSL_TARGET_DEFINES = @WEAVE_OPENSSL_TARGET_DEFINES@ |
| WEAVE_SYSTEM_CONFIG_USE_LWIP = @WEAVE_SYSTEM_CONFIG_USE_LWIP@ |
| WEAVE_SYSTEM_CONFIG_USE_SOCKETS = @WEAVE_SYSTEM_CONFIG_USE_SOCKETS@ |
| WEAVE_TARGET_STYLE = @WEAVE_TARGET_STYLE@ |
| WEAVE_TARGET_STYLE_EMBEDDED = @WEAVE_TARGET_STYLE_EMBEDDED@ |
| WEAVE_TARGET_STYLE_UNIX = @WEAVE_TARGET_STYLE_UNIX@ |
| _ACJNI_JAVAC = @_ACJNI_JAVAC@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_nlbuild_autotools_dir = @abs_top_nlbuild_autotools_dir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| ac_ct_OBJC = @ac_ct_OBJC@ |
| ac_ct_OBJCXX = @ac_ct_OBJCXX@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| ax_pthread_config = @ax_pthread_config@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| nlbuild_autotools_stem = @nlbuild_autotools_stem@ |
| oldincludedir = @oldincludedir@ |
| openssl_buildstem = @openssl_buildstem@ |
| pdfdir = @pdfdir@ |
| pkgpyexecdir = @pkgpyexecdir@ |
| pkgpythondir = @pkgpythondir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| pyexecdir = @pyexecdir@ |
| pythondir = @pythondir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| AM_MAKEFLAGS = --no-print-directory |
| SUBDIRS = \ |
| third_party \ |
| src \ |
| doc \ |
| $(NULL) |
| |
| PRETTY_SUBDIRS = \ |
| $(filter-out third_party,$(SUBDIRS)) \ |
| $(NULL) |
| |
| EXTRA_DIST = \ |
| BUILDING-ESP32.md \ |
| BUILDING.md \ |
| CONTRIBUTING.md \ |
| Makefile-Android \ |
| Makefile-bootstrap \ |
| Makefile-iOS \ |
| Makefile-Standalone \ |
| README.md \ |
| .default-version \ |
| .travis.yml \ |
| .travis/before_install.sh \ |
| .travis/build_esp32.sh \ |
| .travis/prepare_esp32.sh \ |
| .travis/script.sh \ |
| bootstrap \ |
| bootstrap-configure \ |
| repos.conf \ |
| $(srcdir)/build/autoconf \ |
| $(srcdir)/build/config \ |
| $(srcdir)/build/cstyle/cstyle.options \ |
| $(srcdir)/build/esp32 \ |
| $(srcdir)/build/jenkins \ |
| $(srcdir)/build/make \ |
| $(srcdir)/build/scripts \ |
| $(srcdir)/certs \ |
| $(NULL) |
| |
| BUILT_SOURCES = \ |
| .local-version \ |
| $(NULL) |
| |
| dist_doc_DATA = \ |
| CHANGELOG \ |
| LICENSE \ |
| $(NULL) |
| |
| DISTCLEANFILES = \ |
| .local-version \ |
| $(NULL) |
| |
| |
| # There are no source files to lint or prettify in this subdirectory. |
| PRETTY_FILES := $(NULL) |
| |
| # |
| # Package version files: |
| # |
| # .default-version - The default package version. This file is ALWAYS checked |
| # in and should always represent the current baseline |
| # version of the package. |
| # |
| # .dist-version - The distributed package version. This file is NEVER |
| # checked in within the upstream repository, is auto- |
| # generated, and is only found in the package distribution. |
| # |
| # .local-version - The current source code controlled package version. This |
| # file is NEVER checked in within the upstream repository, |
| # is auto-generated, and can always be found in both the |
| # build tree and distribution. |
| # |
| # When present, the .local-version file is preferred first, the |
| # .dist-version second, and the .default-version last. |
| # |
| |
| # VERSION_FILE should be and is intentionally an immediate (:=) rather |
| # than a deferred (=) variable to ensure the value binds once and only once |
| # for a given MAKELEVEL even as .local-version and .dist-version are created |
| # during makefile execution. |
| VERSION_FILE := $(if $(wildcard $(builddir)/.local-version),$(builddir)/.local-version,$(if $(wildcard $(srcdir)/.dist-version),$(srcdir)/.dist-version,$(srcdir)/.default-version)) |
| |
| # |
| # When we run 'distcheck' and --with-<any of the third-party packages |
| # listed in repos.conf>, default to 'internal', the nlbuild-autotools |
| # infrastructure will attempt to create git paths to manage the |
| # package repo. Two directories need to be writable to facilitate |
| # this. |
| # |
| |
| # |
| # BlueZ is not well set-up without patching to handle 'make distcheck'; |
| # disable it for that target. |
| # |
| # We also want a more cursory sanity check for 'distcheck'; consequently, |
| # skip running the Happy-centric tests. |
| # |
| DISTCHECK_CONFIGURE_FLAGS = `chmod u+w .. ../third_party` \ |
| --without-bluez --without-happy |
| weave_tooldist_alias = \ |
| $(PACKAGE_TARNAME)-tools |
| |
| weave_tooldist_name = \ |
| $(weave_tooldist_alias)-$(shell echo $(target) | $(SED) -e 's/[[:digit:].]*$$//g')-$(WEAVE_VERSION) |
| |
| weave_tooldist_archive = \ |
| $(tooldistdir)/$(weave_tooldist_name).tar.gz |
| |
| CLEANFILES = \ |
| $(weave_tooldist_archive) \ |
| $(NULL) |
| |
| all: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-dist_docDATA: $(dist_doc_DATA) |
| @$(NORMAL_INSTALL) |
| @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ |
| done |
| |
| uninstall-dist_docDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-recursive |
| all-am: Makefile $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(docdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-libtool \ |
| distclean-local distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-dist_docDATA |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-dist_docDATA |
| |
| .MAKE: $(am__recursive_targets) all check install install-am \ |
| install-strip |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| am--refresh check check-am clean clean-cscope clean-generic \ |
| clean-libtool cscope cscopelist-am ctags ctags-am dist \ |
| dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ |
| dist-tarZ dist-xz dist-zip distcheck distclean \ |
| distclean-generic distclean-libtool distclean-local \ |
| distclean-tags distcleancheck distdir distuninstallcheck dvi \ |
| dvi-am html html-am info info-am install install-am \ |
| install-data install-data-am install-dist_docDATA install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-ps install-ps-am \ |
| install-strip installcheck installcheck-am installdirs \ |
| installdirs-am maintainer-clean maintainer-clean-generic \ |
| mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ |
| ps ps-am tags tags-am uninstall uninstall-am \ |
| uninstall-dist_docDATA |
| |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/pre.am |
| |
| # To ensure that the .local-version file and subsequent rechecks work |
| # correctly, don't allow this top-level makefile to run in parallel. |
| |
| .NOTPARALLEL: |
| |
| # |
| # Override autotool's default notion of the package version variables. |
| # This ensures that when we create a source distribution the |
| # version is always the current version, not the package bootstrap |
| # version. |
| # |
| # The two-level variables and the check against MAKELEVEL ensures that |
| # not only can the package version be overridden from the command line |
| # but also when the version is NOT overridden that we bind the version |
| # once and only once across potential sub-makes to prevent the version |
| # from flapping as VERSION_FILE changes. |
| # |
| |
| export MAYBE_WEAVE_VERSION := $(if $(filter 0,$(MAKELEVEL)),$(shell cat $(VERSION_FILE) 2> /dev/null),$(MAYBE_WEAVE_VERSION)) |
| |
| WEAVE_VERSION ?= $(MAYBE_WEAVE_VERSION) |
| |
| # |
| # check-file-.local-version |
| # |
| # Speculatively regenerate .local-version and check to see if it needs |
| # to be updated. |
| # |
| # If WEAVE_VERSION has been supplied anywhere other than in this file |
| # (which is implicitly the contents of .local-version), then use that; |
| # otherwise, attempt to generate it from the SCM system. |
| # |
| # This is called from $(call check-file,.local-version). |
| # |
| define check-file-.local-version |
| if [ "$(origin WEAVE_VERSION)" != "file" ]; then \ |
| echo "$(WEAVE_VERSION)" > "$(2)"; \ |
| else \ |
| $(abs_top_nlbuild_autotools_dir)/scripts/mkversion \ |
| -b "$(WEAVE_VERSION)" "$(top_srcdir)" \ |
| > "$(2)"; \ |
| fi |
| endef |
| |
| # |
| # check-file-.dist-version |
| # |
| # Speculatively regenerate .dist-version and check to see if it needs |
| # to be updated. |
| # |
| # This is called from $(call check-file,.dist-version). |
| # |
| define check-file-.dist-version |
| cat "$(1)" > "$(2)" |
| endef |
| |
| # |
| # A convenience target to allow package users to easily rerun the |
| # package configuration according to the current configuration. |
| # |
| .PHONY: reconfigure |
| reconfigure: $(builddir)/config.status |
| $(AM_V_at)$(<) --recheck |
| |
| # |
| # Version file regeneration rules. |
| # |
| .PHONY: force |
| |
| $(builddir)/.local-version: $(srcdir)/.default-version force |
| |
| $(distdir)/.dist-version: $(builddir)/.local-version force |
| |
| $(distdir)/.dist-version $(builddir)/.local-version: |
| $(call check-file,$(@F)) |
| |
| dist distcheck distdir install-headers: $(BUILT_SOURCES) |
| |
| dist-hook: $(distdir)/.dist-version |
| |
| # If you are synchronizing a package on which yours depends using 'repos.conf', |
| # to 'third_party', uncomment and adapt or delete this, as needed. If you choose |
| # to use this, please also take a look at Makefile.am and third_party/Makefile.am |
| # and uncomment the appropriate sections there. |
| |
| # |
| # Ensure any locally synchronized repositories defined by 'repos.conf' |
| # are cleaned up. |
| # |
| distclean-local: |
| $(MAKE) -C $(srcdir) -f Makefile-bootstrap clean-repos |
| |
| # |
| # Top-level convenience target for making a documentation-only |
| # distribution whose results appear at the top level of the build tree |
| # in the same fashion that the distribution would be for 'make dist'. |
| # |
| |
| .PHONY: docdist |
| docdist: $(BUILT_SOURCES) |
| $(MAKE) -C doc docdistdir=$(abs_builddir) $(@) |
| |
| # |
| # Top-level convenience target for making a tools-only distribution |
| # whose resuls appear at the top level of the build tree in the same |
| # fashion that the distribution would be for 'make dist'. |
| # |
| |
| tooldistdir ?= $(abs_builddir) |
| |
| $(weave_tooldist_name): |
| $(AM_V_at)rm -f -r "$(@)" |
| $(call create-directory) |
| $(MAKE) DESTDIR=$(tooldistdir)/$(weave_tooldist_name) install |
| $(AM_V_at)rm -f -r \ |
| "$(@)/include" \ |
| "$(@)/lib/engines" \ |
| "$(@)/lib/libcrypto.a" \ |
| "$(@)/lib/libssl.a" \ |
| "$(@)/lib/pkgconfig" \ |
| "$(@)/openssl" \ |
| "$(@)/share/java" |
| |
| $(weave_tooldist_archive): $(weave_tooldist_name) |
| $(AM_V_at)echo " TAR $(@)" |
| $(AM_V_at)tardir="$(<)" && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c > "$(@)" && rm -rf "$(<)" |
| |
| .PHONY: tooldist |
| tooldist $(weave_tooldist_alias): $(weave_tooldist_archive) |
| |
| # |
| # By virtue of the way we allow for the creation of both libWeave and |
| # libInetLayer, using the same makefile fragment included in the |
| # Makefile.am of each of those libraries, running 'make distclean' |
| # will fail in src/lib after running in src/inet because the |
| # dependencies for the latter have already been cleaned for the |
| # former. |
| # |
| # In general, we don't really care about this specifically or if a |
| # particular step of distclean fails generally, so propagate the |
| # --ignore-errors and --keep-going flags for make on recursive |
| # distclean to avoid this. |
| # |
| |
| distclean-recursive: AM_MAKEFLAGS += -ik |
| |
| include $(abs_top_nlbuild_autotools_dir)/automake/post.am |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |