blob: 2f62dedac5fc25b8bb69a0ca670fd761c6fe170d [file] [log] [blame]
/******************************************************************************
* Filename: setup_rom.h
* Revised: 2017-06-05 12:13:49 +0200 (Mon, 05 Jun 2017)
* Revision: 49096
*
* Description: Prototypes and defines for the setup API.
*
* Copyright (c) 2015 - 2017, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3) Neither the name of the ORGANIZATION nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
//*****************************************************************************
//
//! \addtogroup system_control_group
//! @{
//! \addtogroup setup_api
//! @{
//
//*****************************************************************************
#ifndef __SETUP_ROM_H__
#define __SETUP_ROM_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
// Hardware headers
#include "../inc/hw_types.h"
// Driverlib headers
// - None needed
//*****************************************************************************
//
// Support for DriverLib in ROM:
// This section renames all functions that are not "static inline", so that
// calling these functions will default to implementation in flash. At the end
// of this file a second renaming will change the defaults to implementation in
// ROM for available functions.
//
// To force use of the implementation in flash, e.g. for debugging:
// - Globally: Define DRIVERLIB_NOROM at project level
// - Per function: Use prefix "NOROM_" when calling the function
//
//*****************************************************************************
#if !defined(DOXYGEN)
#define SetupAfterColdResetWakeupFromShutDownCfg1 NOROM_SetupAfterColdResetWakeupFromShutDownCfg1
#define SetupAfterColdResetWakeupFromShutDownCfg2 NOROM_SetupAfterColdResetWakeupFromShutDownCfg2
#define SetupAfterColdResetWakeupFromShutDownCfg3 NOROM_SetupAfterColdResetWakeupFromShutDownCfg3
#define SetupGetTrimForAdcShModeEn NOROM_SetupGetTrimForAdcShModeEn
#define SetupGetTrimForAdcShVbufEn NOROM_SetupGetTrimForAdcShVbufEn
#define SetupGetTrimForAmpcompCtrl NOROM_SetupGetTrimForAmpcompCtrl
#define SetupGetTrimForAmpcompTh1 NOROM_SetupGetTrimForAmpcompTh1
#define SetupGetTrimForAmpcompTh2 NOROM_SetupGetTrimForAmpcompTh2
#define SetupGetTrimForAnabypassValue1 NOROM_SetupGetTrimForAnabypassValue1
#define SetupGetTrimForDblrLoopFilterResetVoltage NOROM_SetupGetTrimForDblrLoopFilterResetVoltage
#define SetupGetTrimForRadcExtCfg NOROM_SetupGetTrimForRadcExtCfg
#define SetupGetTrimForRcOscLfIBiasTrim NOROM_SetupGetTrimForRcOscLfIBiasTrim
#define SetupGetTrimForRcOscLfRtuneCtuneTrim NOROM_SetupGetTrimForRcOscLfRtuneCtuneTrim
#define SetupGetTrimForXoscHfCtl NOROM_SetupGetTrimForXoscHfCtl
#define SetupGetTrimForXoscHfFastStart NOROM_SetupGetTrimForXoscHfFastStart
#define SetupGetTrimForXoscHfIbiastherm NOROM_SetupGetTrimForXoscHfIbiastherm
#define SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio NOROM_SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio
#define SetupSetCacheModeAccordingToCcfgSetting NOROM_SetupSetCacheModeAccordingToCcfgSetting
#define SetupSetAonRtcSubSecInc NOROM_SetupSetAonRtcSubSecInc
#endif
//*****************************************************************************
//
//! \brief First part of configuration required when waking up from shutdown.
//!
//! \param ccfg_ModeConfReg
//!
//! \return None
//
//*****************************************************************************
extern void SetupAfterColdResetWakeupFromShutDownCfg1( uint32_t ccfg_ModeConfReg );
//*****************************************************************************
//
//! \brief Second part of configuration required when waking up from shutdown.
//!
//! \param ui32Fcfg1Revision
//! \param ccfg_ModeConfReg
//!
//! \return None
//
//*****************************************************************************
extern void SetupAfterColdResetWakeupFromShutDownCfg2( uint32_t ui32Fcfg1Revision, uint32_t ccfg_ModeConfReg );
//*****************************************************************************
//
//! \brief Third part of configuration required when waking up from shutdown.
//!
//! \param ccfg_ModeConfReg
//!
//! \return None
//
//*****************************************************************************
extern void SetupAfterColdResetWakeupFromShutDownCfg3( uint32_t ccfg_ModeConfReg );
//*****************************************************************************
//
//! \brief Returns the trim value from FCFG1 to be used as ADC_SH_MODE_EN setting.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value from FCFG1.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForAdcShModeEn( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the trim value from FCFG1 to be used as ADC_SH_VBUF_EN setting.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value from FCFG1.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForAdcShVbufEn( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the AMPCOMP_CTRL register in OSC_DIG.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForAmpcompCtrl( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the AMPCOMP_TH1 register in OSC_DIG.
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForAmpcompTh1( void );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the AMPCOMP_TH2 register in OSC_DIG.
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForAmpcompTh2( void );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the ANABYPASS_VALUE1 register in OSC_DIG.
//!
//! \param ccfg_ModeConfReg
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForAnabypassValue1( uint32_t ccfg_ModeConfReg );
//*****************************************************************************
//
//! \brief Returns the trim value from FCFG1 to be used as DBLR_LOOP_FILTER_RESET_VOLTAGE setting.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value from FCFG1.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForDblrLoopFilterResetVoltage( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the RADCEXTCFG register in OSC_DIG.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForRadcExtCfg( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the FCFG1 OSC_CONF_ATESTLF_RCOSCLF_IBIAS_TRIM.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value from FCFG1.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForRcOscLfIBiasTrim( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the RCOSCLF_RTUNE_TRIM and the
//! RCOSCLF_CTUNE_TRIM bit fields in the XOSCLF_RCOSCLF_CTRL register in OSC_DIG.
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForRcOscLfRtuneCtuneTrim( void );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the XOSCHFCTL register in OSC_DIG.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForXoscHfCtl( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Returns the trim value to be used as OSC_DIG:CTL1.XOSC_HF_FAST_START.
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForXoscHfFastStart( void );
//*****************************************************************************
//
//! \brief Returns the trim value to be used for the XOSC_HF_IBIASTHERM bit field in
//! the ANABYPASS_VALUE2 register in OSC_DIG.
//!
//! \return Returns the trim value.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForXoscHfIbiastherm( void );
//*****************************************************************************
//
//! \brief Returns XOSCLF_REGULATOR_TRIM and XOSCLF_CMIRRWR_RATIO as one packet
//! spanning bits [5:0] in the returned value.
//!
//! \param ui32Fcfg1Revision
//!
//! \return Returns XOSCLF_REGULATOR_TRIM and XOSCLF_CMIRRWR_RATIO as one packet.
//
//*****************************************************************************
extern uint32_t SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio( uint32_t ui32Fcfg1Revision );
//*****************************************************************************
//
//! \brief Sign extend the VDDR_TRIM setting (special format ranging from -10 to +21)
//!
//! \param ui32VddrTrimVal
//!
//! \return Returns Sign extended VDDR_TRIM setting.
//
//*****************************************************************************
__STATIC_INLINE int32_t
SetupSignExtendVddrTrimValue( uint32_t ui32VddrTrimVal )
{
// The VDDR trim value is 5 bits representing the range from -10 to +21
// (where -10=0x16, -1=0x1F, 0=0x00, 1=0x01 and +21=0x15)
int32_t i32SignedVddrVal = ui32VddrTrimVal;
if ( i32SignedVddrVal > 0x15 ) {
i32SignedVddrVal -= 0x20;
}
return ( i32SignedVddrVal );
}
//*****************************************************************************
//
//! \brief Set correct VIMS_MODE according to CCFG setting (CACHE or GPRAM)
//!
//! \return None
//
//*****************************************************************************
extern void SetupSetCacheModeAccordingToCcfgSetting( void );
//*****************************************************************************
//
//! \brief Doing the tricky stuff needed to enter new RTCSUBSECINC value
//!
//! \param subSecInc
//!
//! \return None
//
//*****************************************************************************
extern void SetupSetAonRtcSubSecInc( uint32_t subSecInc );
//*****************************************************************************
//
// Support for DriverLib in ROM:
// Redirect to implementation in ROM when available.
//
//*****************************************************************************
#if !defined(DRIVERLIB_NOROM) && !defined(DOXYGEN)
#include "../driverlib/rom.h"
#ifdef ROM_SetupAfterColdResetWakeupFromShutDownCfg1
#undef SetupAfterColdResetWakeupFromShutDownCfg1
#define SetupAfterColdResetWakeupFromShutDownCfg1 ROM_SetupAfterColdResetWakeupFromShutDownCfg1
#endif
#ifdef ROM_SetupAfterColdResetWakeupFromShutDownCfg2
#undef SetupAfterColdResetWakeupFromShutDownCfg2
#define SetupAfterColdResetWakeupFromShutDownCfg2 ROM_SetupAfterColdResetWakeupFromShutDownCfg2
#endif
#ifdef ROM_SetupAfterColdResetWakeupFromShutDownCfg3
#undef SetupAfterColdResetWakeupFromShutDownCfg3
#define SetupAfterColdResetWakeupFromShutDownCfg3 ROM_SetupAfterColdResetWakeupFromShutDownCfg3
#endif
#ifdef ROM_SetupGetTrimForAdcShModeEn
#undef SetupGetTrimForAdcShModeEn
#define SetupGetTrimForAdcShModeEn ROM_SetupGetTrimForAdcShModeEn
#endif
#ifdef ROM_SetupGetTrimForAdcShVbufEn
#undef SetupGetTrimForAdcShVbufEn
#define SetupGetTrimForAdcShVbufEn ROM_SetupGetTrimForAdcShVbufEn
#endif
#ifdef ROM_SetupGetTrimForAmpcompCtrl
#undef SetupGetTrimForAmpcompCtrl
#define SetupGetTrimForAmpcompCtrl ROM_SetupGetTrimForAmpcompCtrl
#endif
#ifdef ROM_SetupGetTrimForAmpcompTh1
#undef SetupGetTrimForAmpcompTh1
#define SetupGetTrimForAmpcompTh1 ROM_SetupGetTrimForAmpcompTh1
#endif
#ifdef ROM_SetupGetTrimForAmpcompTh2
#undef SetupGetTrimForAmpcompTh2
#define SetupGetTrimForAmpcompTh2 ROM_SetupGetTrimForAmpcompTh2
#endif
#ifdef ROM_SetupGetTrimForAnabypassValue1
#undef SetupGetTrimForAnabypassValue1
#define SetupGetTrimForAnabypassValue1 ROM_SetupGetTrimForAnabypassValue1
#endif
#ifdef ROM_SetupGetTrimForDblrLoopFilterResetVoltage
#undef SetupGetTrimForDblrLoopFilterResetVoltage
#define SetupGetTrimForDblrLoopFilterResetVoltage ROM_SetupGetTrimForDblrLoopFilterResetVoltage
#endif
#ifdef ROM_SetupGetTrimForRadcExtCfg
#undef SetupGetTrimForRadcExtCfg
#define SetupGetTrimForRadcExtCfg ROM_SetupGetTrimForRadcExtCfg
#endif
#ifdef ROM_SetupGetTrimForRcOscLfIBiasTrim
#undef SetupGetTrimForRcOscLfIBiasTrim
#define SetupGetTrimForRcOscLfIBiasTrim ROM_SetupGetTrimForRcOscLfIBiasTrim
#endif
#ifdef ROM_SetupGetTrimForRcOscLfRtuneCtuneTrim
#undef SetupGetTrimForRcOscLfRtuneCtuneTrim
#define SetupGetTrimForRcOscLfRtuneCtuneTrim ROM_SetupGetTrimForRcOscLfRtuneCtuneTrim
#endif
#ifdef ROM_SetupGetTrimForXoscHfCtl
#undef SetupGetTrimForXoscHfCtl
#define SetupGetTrimForXoscHfCtl ROM_SetupGetTrimForXoscHfCtl
#endif
#ifdef ROM_SetupGetTrimForXoscHfFastStart
#undef SetupGetTrimForXoscHfFastStart
#define SetupGetTrimForXoscHfFastStart ROM_SetupGetTrimForXoscHfFastStart
#endif
#ifdef ROM_SetupGetTrimForXoscHfIbiastherm
#undef SetupGetTrimForXoscHfIbiastherm
#define SetupGetTrimForXoscHfIbiastherm ROM_SetupGetTrimForXoscHfIbiastherm
#endif
#ifdef ROM_SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio
#undef SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio
#define SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio ROM_SetupGetTrimForXoscLfRegulatorAndCmirrwrRatio
#endif
#ifdef ROM_SetupSetCacheModeAccordingToCcfgSetting
#undef SetupSetCacheModeAccordingToCcfgSetting
#define SetupSetCacheModeAccordingToCcfgSetting ROM_SetupSetCacheModeAccordingToCcfgSetting
#endif
#ifdef ROM_SetupSetAonRtcSubSecInc
#undef SetupSetAonRtcSubSecInc
#define SetupSetAonRtcSubSecInc ROM_SetupSetAonRtcSubSecInc
#endif
#endif
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __SETUP_ROM_H__
//*****************************************************************************
//
//! Close the Doxygen group.
//! @}
//! @}
//
//*****************************************************************************