| #!/bin/bash |
| # |
| # Copyright (c) 2018, The OpenThread Authors. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of the copyright holder nor the |
| # names of its contributors may be used to endorse or promote products |
| # derived from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| |
| die() |
| { |
| echo " *** ERROR: " "$*" |
| exit 1 |
| } |
| |
| cleanup() |
| { |
| # Clear logs and flash files |
| sudo rm tmp/*.flash tmp/*.data tmp/*.swap >/dev/null 2>&1 |
| sudo rm ./*.log >/dev/null 2>&1 |
| |
| if [ "$TORANJ_CLI" != 1 ]; then |
| # Clear any wpantund instances |
| sudo killall wpantund >/dev/null 2>&1 |
| |
| while read -r interface; do |
| sudo ip link delete "$interface" >/dev/null 2>&1 |
| done < <(ifconfig 2>/dev/null | grep -o "wpan[0-9]*") |
| fi |
| |
| sleep 0.3 |
| } |
| |
| run() |
| { |
| counter=0 |
| while true; do |
| if sudo -E "${python_app}" "$1"; then |
| cleanup |
| return |
| fi |
| |
| # We allow a failed test to be retried up to 7 attempts. |
| if [ "$counter" -lt 7 ]; then |
| counter=$((counter + 1)) |
| echo Attempt $counter running "$1" failed. Trying again. |
| cleanup |
| sleep 10 |
| continue |
| fi |
| |
| echo " *** TEST FAILED" |
| tail -n 40 "${log_file_name}"*.log |
| exit 1 |
| done |
| } |
| |
| install_wpantund() |
| { |
| echo "Installing wpantund" |
| sudo apt-get --no-install-recommends install -y dbus libdbus-1-dev |
| sudo apt-get --no-install-recommends install -y autoconf-archive |
| sudo apt-get --no-install-recommends install -y libarchive-tools |
| sudo apt-get --no-install-recommends install -y libtool |
| sudo apt-get --no-install-recommends install -y libglib2.0-dev |
| sudo apt-get --no-install-recommends install -y lcov |
| |
| sudo add-apt-repository universe |
| sudo apt-get update |
| sudo apt-get --no-install-recommends install -y libboost-all-dev python2 |
| |
| git clone --depth=1 --branch=master https://github.com/openthread/wpantund.git || die "wpandtund clone" |
| cd wpantund || die "cd wpantund failed" |
| ./bootstrap.sh |
| ./configure |
| sudo make -j2 || die "wpantund make failed" |
| sudo make install || die "wpantund make install failed" |
| cd .. || die "cd .. failed" |
| } |
| |
| cd "$(dirname "$0")" || die "cd failed" |
| |
| if [ "$TORANJ_NCP" = 1 ]; then |
| echo "========================================================================" |
| echo "Running toranj-ncp triggered by event ${TORANJ_EVENT_NAME}" |
| |
| if [ "$TORANJ_EVENT_NAME" = "pull_request" ]; then |
| cd ../.. |
| OT_SHA_OLD="$(git cat-file -p HEAD | grep 'parent ' | head -n1 | cut -d' ' -f2)" |
| git fetch --depth 1 --no-recurse-submodules origin "${OT_SHA_OLD}" |
| if git diff --name-only --exit-code "${OT_SHA_OLD}" -- src/ncp; then |
| echo "No changes to any of src/ncp files - skip running tests." |
| echo "========================================================================" |
| exit 0 |
| fi |
| cd tests/toranj || die "cd tests/toranj failed" |
| echo "There are change in src/ncp files, running toranj-ncp tests" |
| fi |
| |
| echo "========================================================================" |
| install_wpantund |
| fi |
| |
| if [ -z "${top_builddir}" ]; then |
| top_builddir=. |
| fi |
| |
| if [ "$COVERAGE" = 1 ]; then |
| coverage_option="--enable-coverage" |
| else |
| coverage_option="" |
| fi |
| |
| if [ "$TORANJ_CLI" = 1 ]; then |
| app_name="cli" |
| python_app="python3" |
| log_file_name="ot-logs" |
| else |
| app_name="ncp" |
| python_app="python2" |
| log_file_name="wpantund-logs" |
| fi |
| |
| if [ "$TORANJ_RADIO" = "multi" ]; then |
| # Build all combinations |
| ./build.sh "${coverage_option}" "${app_name}"-15.4 || die "${app_name}-15.4 build failed" |
| ./build.sh "${coverage_option}" "${app_name}"-trel || die "${app_name}-trel build failed" |
| ./build.sh "${coverage_option}" "${app_name}"-15.4+trel || die "${app_name}-15.4+trel build failed" |
| else |
| ./build.sh "${coverage_option}" "${app_name}"-"${TORANJ_RADIO}" || die "build failed" |
| fi |
| |
| cleanup |
| |
| if [ "$TORANJ_CLI" = 1 ]; then |
| |
| if [ "$TORANJ_RADIO" = "multi" ]; then |
| run cli/test-700-multi-radio-join.py |
| run cli/test-701-multi-radio-probe.py |
| run cli/test-702-multi-radio-discover-by-rx.py |
| run cli/test-703-multi-radio-mesh-header-msg.py |
| run cli/test-704-multi-radio-scan.py |
| run cli/test-705-multi-radio-discover-scan.py |
| |
| exit 0 |
| fi |
| |
| run cli/test-001-get-set.py |
| run cli/test-002-form.py |
| run cli/test-003-join.py |
| run cli/test-004-scan.py |
| run cli/test-005-traffic-router-to-child.py |
| run cli/test-006-traffic-multi-hop.py |
| run cli/test-007-off-mesh-route-traffic.py |
| run cli/test-008-multicast-traffic.py |
| run cli/test-009-router-table.py |
| run cli/test-010-partition-merge.py |
| run cli/test-011-network-data-timeout.py |
| run cli/test-012-reset-recovery.py |
| run cli/test-013-address-cache-parent-switch.py |
| run cli/test-014-address-resolver.py |
| run cli/test-015-clear-addresss-cache-for-sed.py |
| run cli/test-016-child-mode-change.py |
| run cli/test-017-network-data-versions.py |
| run cli/test-018-next-hop-and-path-cost.py |
| run cli/test-019-netdata-context-id.py |
| run cli/test-020-net-diag-vendor-info.py |
| run cli/test-021-br-route-prf.py |
| run cli/test-022-netdata-full.py |
| run cli/test-023-mesh-diag.py |
| run cli/test-024-mle-adv-imax-change.py |
| run cli/test-025-mesh-local-prefix-change.py |
| run cli/test-026-coaps-conn-limit.py |
| run cli/test-027-slaac-address.py |
| run cli/test-028-border-agent-ephemeral-key.py |
| run cli/test-400-srp-client-server.py |
| run cli/test-401-srp-server-address-cache-snoop.py |
| run cli/test-500-two-brs-two-networks.py |
| run cli/test-501-multi-br-failure-recovery.py |
| run cli/test-502-multi-br-leader-failure-recovery.py |
| run cli/test-601-channel-manager-channel-change.py |
| # Skip the "channel-select" test on a TREL only radio link, since it |
| # requires energy scan which is not supported in this case. |
| if [ "$TORANJ_RADIO" != "trel" ]; then |
| run cli/test-602-channel-manager-channel-select.py |
| fi |
| run cli/test-603-channel-announce-recovery.py |
| |
| exit 0 |
| fi |
| |
| if [ "$TORANJ_RADIO" = "multi" ]; then |
| run ncp/test-700-multi-radio-join.py |
| run ncp/test-701-multi-radio-probe.py |
| run ncp/test-702-multi-radio-discovery-by-rx.py |
| run ncp/test-703-multi-radio-mesh-header-msg.py |
| run ncp/test-704-multi-radio-scan.py |
| run ncp/test-705-multi-radio-discover-scan.py |
| |
| exit 0 |
| fi |
| |
| run ncp/test-001-get-set.py |
| run ncp/test-002-form.py |
| run ncp/test-003-join.py |
| run ncp/test-004-scan.py |
| run ncp/test-005-discover-scan.py |
| run ncp/test-006-traffic-router-end-device.py |
| run ncp/test-007-traffic-router-sleepy.py |
| run ncp/test-009-insecure-traffic-join.py |
| run ncp/test-010-on-mesh-prefix-config-gateway.py |
| run ncp/test-011-child-table.py |
| run ncp/test-012-multi-hop-traffic.py |
| run ncp/test-013-off-mesh-route-traffic.py |
| run ncp/test-014-ip6-address-add.py |
| run ncp/test-015-same-prefix-on-multiple-nodes.py |
| run ncp/test-016-neighbor-table.py |
| run ncp/test-017-parent-reset-child-recovery.py |
| run ncp/test-019-inform-previous-parent.py |
| run ncp/test-020-router-table.py |
| run ncp/test-021-address-cache-table.py |
| run ncp/test-022-multicast-ip6-address.py |
| run ncp/test-023-multicast-traffic.py |
| run ncp/test-024-partition-merge.py |
| run ncp/test-025-network-data-timeout.py |
| run ncp/test-026-slaac-address-wpantund.py |
| run ncp/test-027-child-mode-change.py |
| run ncp/test-028-router-leader-reset-recovery.py |
| run ncp/test-029-data-poll-interval.py |
| # run ncp/test-030-slaac-address-ncp.py |
| run ncp/test-031-meshcop-joiner-commissioner.py |
| run ncp/test-032-child-attach-with-multiple-ip-addresses.py |
| run ncp/test-033-mesh-local-prefix-change.py |
| run ncp/test-034-poor-link-parent-child-attach.py |
| run ncp/test-035-child-timeout-large-data-poll.py |
| run ncp/test-036-wpantund-host-route-management.py |
| run ncp/test-037-wpantund-auto-add-route-for-on-mesh-prefix.py |
| run ncp/test-038-clear-address-cache-for-sed.py |
| run ncp/test-039-address-cache-table-snoop.py |
| run ncp/test-040-network-data-stable-full.py |
| run ncp/test-041-lowpan-fragmentation.py |
| run ncp/test-042-meshcop-joiner-discerner.py |
| run ncp/test-043-meshcop-joiner-router.py |
| run ncp/test-100-mcu-power-state.py |
| run ncp/test-600-channel-manager-properties.py |
| run ncp/test-601-channel-manager-channel-change.py |
| |
| # Skip the "channel-select" test on a TREL only radio link, since it |
| # requires energy scan which is not supported in this case. |
| |
| if [ "$TORANJ_RADIO" != "trel" ]; then |
| run ncp/test-602-channel-manager-channel-select.py |
| fi |
| |
| run ncp/test-603-channel-manager-announce-recovery.py |
| |
| exit 0 |